And this how you get cheep parts at the parts store
@HUIVAM7 ай бұрын
Интересно откуда взяли новые ламели, по которым щетки бегают......
@kevdimo64597 ай бұрын
Congratulations that was so good to watch. You Sir are a true professional in your chosen career. Thanks for showing us all how to make the most of what you have. 👍🏼
@offpherj78847 ай бұрын
Excellent...
@lww39886 ай бұрын
這翻新技術就是專業,佩服❤
@Hmod-Al.motiri7 ай бұрын
عمل رائع
@fahadalmudayfir5712 ай бұрын
I learnt to be patient lol
@stony78277 ай бұрын
👏👏👍👍🙏
@lovehatecomments4 ай бұрын
You guys did a much detailed and better job at this restoration than I expected. Please do more restorations from Pakistan. Thanks!
@MaxmadV87 ай бұрын
If you read the instructions manual. Under "Disassembly" it says "Set it on fire" that way the harmful chemicals and gases safely go into the air and water supply.
@joaquimlimanascimento45127 ай бұрын
Muito bom
@WowThings
7 ай бұрын
Stay connected.
@ramayasket7 ай бұрын
Nice! And an optimistic colour you've chosen for it :)
@WowThings
7 ай бұрын
Thanks! 😊
@benzo-745 ай бұрын
Межвитковому замыканию быть😂😂😂
@KanchantraverseIndustries6 ай бұрын
Sir,Which cemical do you use to clean those parts?
@80684
6 ай бұрын
I think gas
@Foodveloger7 ай бұрын
Wow that's Great Work 💯
@WowThings
7 ай бұрын
Thanks 🔥
@yeungyeungjohn6 ай бұрын
厲害
@sysierius7 ай бұрын
*bearings left the chat*
@mosizlackm75227 ай бұрын
Just not the same with all new tools. Need more dirt :(
@bryanmontello57025 ай бұрын
English here is also needed 😭
@natalex027 ай бұрын
Огонь..)))
@georgegonzalez24767 ай бұрын
Yeah sure. Except you spent most of the time making it LOOK better, and wasted a lot of time redoing things that didn't need redoing, and didn't do things that needed doing. And scarred up the shafts. and tediously wire-brushed up the copper conductors. And annealed the main shaft. And soldered instead of spot-welded the wire ends. And reused the old bearings, didn't even wash them out and regrease the bearings. And reused the old sprags. And reused the old brushes. And didn't seat the brushes. And didn't refurbish the engagement solenoid or relay points. And didn't burnish the commutator. And didn't put down a coat of primer. And didn't test the final product under actual conditions for noise, engagement, torque, or current draw. A true "Craigslist" or "Chinese" rebuild. Nobody wins at this game.
@zhugeliang777
7 ай бұрын
ouch.
@kevwills858
6 ай бұрын
What do you expect for $50 ?
@Fanzindel
6 ай бұрын
Thank you for shining some light on the plot holes of this theater performance!!
@Kato_pa
6 ай бұрын
Actually all video could be like 5 sec in the beginning and 5 sec in the end 😂
@lovehatecomments
4 ай бұрын
Jesus calm the F down! It probably works for them and their needs. They did what they could or had the means to considering circumstances you can't possibly understand not being from that part of the world. Of course it isn't perfect or did the best job. Calm down and go hate on something/someone else. WTF is wrong with people these days.
@user-bj7he7xc6s7 ай бұрын
Эй, зачем покрасил, дорогой!? Все исиспортил!)))
@user-bj5rb6xf2w7 ай бұрын
Уважаемый, сколько по времени занимает эта работа?
Пікірлер: 34
Amazing!
And this how you get cheep parts at the parts store
Интересно откуда взяли новые ламели, по которым щетки бегают......
Congratulations that was so good to watch. You Sir are a true professional in your chosen career. Thanks for showing us all how to make the most of what you have. 👍🏼
Excellent...
這翻新技術就是專業,佩服❤
عمل رائع
I learnt to be patient lol
👏👏👍👍🙏
You guys did a much detailed and better job at this restoration than I expected. Please do more restorations from Pakistan. Thanks!
If you read the instructions manual. Under "Disassembly" it says "Set it on fire" that way the harmful chemicals and gases safely go into the air and water supply.
Muito bom
@WowThings
7 ай бұрын
Stay connected.
Nice! And an optimistic colour you've chosen for it :)
@WowThings
7 ай бұрын
Thanks! 😊
Межвитковому замыканию быть😂😂😂
Sir,Which cemical do you use to clean those parts?
@80684
6 ай бұрын
I think gas
Wow that's Great Work 💯
@WowThings
7 ай бұрын
Thanks 🔥
厲害
*bearings left the chat*
Just not the same with all new tools. Need more dirt :(
English here is also needed 😭
Огонь..)))
Yeah sure. Except you spent most of the time making it LOOK better, and wasted a lot of time redoing things that didn't need redoing, and didn't do things that needed doing. And scarred up the shafts. and tediously wire-brushed up the copper conductors. And annealed the main shaft. And soldered instead of spot-welded the wire ends. And reused the old bearings, didn't even wash them out and regrease the bearings. And reused the old sprags. And reused the old brushes. And didn't seat the brushes. And didn't refurbish the engagement solenoid or relay points. And didn't burnish the commutator. And didn't put down a coat of primer. And didn't test the final product under actual conditions for noise, engagement, torque, or current draw. A true "Craigslist" or "Chinese" rebuild. Nobody wins at this game.
@zhugeliang777
7 ай бұрын
ouch.
@kevwills858
6 ай бұрын
What do you expect for $50 ?
@Fanzindel
6 ай бұрын
Thank you for shining some light on the plot holes of this theater performance!!
@Kato_pa
6 ай бұрын
Actually all video could be like 5 sec in the beginning and 5 sec in the end 😂
@lovehatecomments
4 ай бұрын
Jesus calm the F down! It probably works for them and their needs. They did what they could or had the means to considering circumstances you can't possibly understand not being from that part of the world. Of course it isn't perfect or did the best job. Calm down and go hate on something/someone else. WTF is wrong with people these days.
Эй, зачем покрасил, дорогой!? Все исиспортил!)))
Уважаемый, сколько по времени занимает эта работа?
@user-nc9qu8li4j
6 ай бұрын
Максимум 20 мин.