Thank you, so much for this information, specially for woman, there is a lot of stuff that we don’t know about cars. This is very helpful, and awesome. Thank you, from Hawaii.😀

Thanks Stephen, you've just saved me a lot of cash. I've been looking for a scan tool for a while now. You have answered all my questions in this video so far. I'm going to get mine ordered. Thanks again Sir.

Just bought one and used the coupon. When I started out working on cars are used analog multi meter’s back in the 60s. No pocket calculator I had the slipstick, ie slide rule.I’ve always liked The autell. I have snap on tools that I use also. But I couldn’t see spending $10,000 on a scan tool.

MK808BT is a great car scanner, love it！

@nbookie

4 жыл бұрын

Could you do me a favor? Look under dodge, engine, see if you can run the vgt turbo actuator calibration? I have called them twice and they cant verify. I do not know anyone locally with one. All the shops have snapon.

I bough this same scan tool from Amazon and had set up issues w email. Contacted Autel and got the cold shoulder since I bought it from Amazon! Be aware that Autel customer service won’t help you when you buy from Amazon So it’s going back and getting a Foxwell scan tool instead

😢clear and complete...thank you..

Nice! I have a Bimmer as well thanks

If you're walking around a lot with either of those in your hand the seller gone be looking crazy as heck.

Lol ford v10 is one of my favorite and still to this prefer over powerstroke especially over 2004 and newer thanks for ur video's Boss

According to Autel, the MK version is a UK version only and may IP lock if used in the states and the MX version is for the states. Then they say it has very limited key programming modes.

@gtasandman

3 жыл бұрын

MX is English only and MK has multiple languages thats the difference

You also want to look for pending codes (separate menu). These are intermittent codes and they don't set the CEL/MIL until certain conditions are met (x numeber of engine start cycles). If the problem pesists after x number of cycles, the code will be set and the CEL/MIL will illuminate. I always use by scan tool to reset the codes to see if the problem comes back. If so, I know I have a hard failure. A couple of times on different vehicles, the codes never came back. Two other times on different vehicles, the EVAP leak code came back - gas cap problem. Money invested in a goode code read will pay for itself after one or two repairs at the most.

helpful a lot...i am in Argentina and amazing. tomorrow i am going to receive MK808S..good motivation...If you put more videos I am going to share with friends...Thanks...

Very good video

Good stuff

Does it do the bi directional active tests like the Launch?

thanks i lernt heaps

I'm considering the Bluetooth version oh and I follow scannerdanner 2 keep popping out them good videos

A car dealership got me. The next day check engine light went on and it turned out I needed all four cats. Wish I had this machine then, over my standard code reader.

So can it locate other active keys? I only have one key for my C140 and I want an extra key or two. Does MB still have a restriction on their key program..?

I welcome someone to steal my cars. They all have insurance

EXCELLENT

How come you got the Bluetooth version of the scanner and not the wired one? I’m trying to choose between the two and they’re the same price but don’t know which one to get

Can U get different adapters for the autel for Ford or more

i have same thoughts when it comes to keys to apartments and so on.When you rent an apartment......who lived there before?

@heyyou5189

4 жыл бұрын

Ask the landlord about how he maintains key control.

Can it program gearbox and transmission on some car vehicles

Does this tool work with Australian cars, or all manufacturers?

Hey mr Stephen does the autel work on trucks from small to 1 ton too.I’m sure u know what I mean when I say regular trucks and not commercial vehicles.like ur work truck is a regular truck with a Utility bed on it

Hello Great video and chanel Can u please show how to see if the seller reset problems car on autel mk808bt Thanks

Master how much cost the upgrade every year. Is expensive. Thanks

Hello, I'm a self taught backyard manchanic learning from my father in law fleet manchanic for over 50 years. However I was wondering what is the best scan tool That cover obd2 , SRS, tpms, emissions and air bags etc. I see several of your videos covering several scan tools So wondering what is the best scan tool I have a 07Ford escape hybrid, 2011f150 and 2011 Toyota Sienna in the family fleet plus other family cars Thanks in advance

@danburch9989

4 жыл бұрын

Whatever scan tool you consider buying, remember this: Some cars don't send unique data out the OBD port. All scan tools are required to send emissions related information. The rest is optional. Soooooo, if the scan tool can read TPMS data for example, but the computer doesn't send that data out the OBD port, your scan tool won't help.

Just install a kill switch duhh

Is the foxwell nt624 a good scanner.

I once followed and believed in you so I bought a Launch. Wish I would have never done so. That Launch was the worst POS I’ve ever bought. I would recommend everyone to stay away from Launch. Worst cust supp and it was not US based. All plz stay clear the Launch Scam…..

I have the Altel MK808 could you do a Video on reprograming the personalized key number from a new Key FOB purchased ( My new Key FOB is listed as 256) Not 1-10 like. Since its listed as 256 I cant do anything with my present knowledge . I deactivated #1 and #3 - 10 as my key is listed as #2.

What kind of scanner is how much cost please

Will this scan tool or the wired version, work on my 2000 ford 7.3 AND 2006 ford 6.0 diesels? My (pro) mechanic says my trucks stall out when his computer attempts to communicate with them. I think he uses snap on.

@33elmore

3 жыл бұрын

I understand this scanner works on cars from 1996 to 2018 gasoline or diesel.

Can i us this on a 7.3 ford? Most of the scan tools i have found dont like to communicate with this motor. Always stalls the engine during tests.

@Tillerman4

3 жыл бұрын

Mine also..My 6.0 does the same. Any updates on an answer to your question?

I thought "inc" stood for incomplete not inconclusive. Does it graph live data?

Hey I just wanted to let you know that your VIN is shown on multiple screens in the bottom left, review the video to see.

need to start a car channel .everybody is getting free pro scanners. Amazing. and we buy them and find out they have so many incomplete features and issues that nobody talks about. And, Autel tool cost just slightly less because it's only 1 free year update and after that is 200-300 to update. other companies have 2 and 3 years free.

Will the Launch tool also do the I/M readiness codes?

@StephenCoxfixit

2 жыл бұрын

Yes

When purchasing this type of equipment from Amazon, has anyone had problems doing updates with the equipment not purchased from a north american supplier?

@JoseDeS

4 жыл бұрын

I asked Autel, and yes they did confirmed that you should buy it from an authorized retailer in the country from which you will use it otherwise you get an IP lock when it's time to update. Also they did confirm that the MK908 is an online sale only model which makes it international so no IP lock on it or any of the online sale only models.

I have purchased two scanners already and they are not compatible with my one ton 7399 dually

my biggest problem with autel is there update cost

does it work on keys or just say it does

It doesn't even have bi-directional controls... never compare Launch X431 with this backyard technician Autel tool (I have both)

Could you do me a favor and verify a feature of this tool? Look under dodge, engine, see if you can run the vgt turbo actuator calibration? I have called them twice and they cant verify. I do not know anyone locally with one. All the shops have snapon.

@StephenCoxfixit

4 жыл бұрын

I'll try but the only Cummins I have access to right now is a 5.9 so no vgt. I'll navigate through the menu and see what options there are. I dont check KZread comments very much so if you would, contact me on my email stephencox09@gmail.com

@nbookie

4 жыл бұрын

Email sent.

@codyemerson4307

2 жыл бұрын

Nbookie did you by chance figure out if you can calibrate a vgt with this scanner? Also do you know if you can relearn 68s with it and if you can unlock other functions for the dodges? Like my truck came without tow mirrors and didn’t have turn signals on them I installed new tow mirrors on my truck they have lights so I need to unlock the LEB & LEC codes to get them to work? I appreciate the info!

Iam Ethiopia please I need this scan Tools?how to get it?

@33elmore

3 жыл бұрын

Check eBay, AliExpress or Wish

It may not turn the car on but that extra key can still open doors....

someones been watching the gun man

ABS module chang eus mach no

Hi

Will this work on a 7.3 diesel 1999

@saulcortes6802

Жыл бұрын

Did anyone ever reply to you about it working with a 7.3 I also have a 1999 7.3 and don't know if I should buy the scanner

@juniorgray2340

15 күн бұрын

I think odb2 is from the year 2000 and up anything before is obd1 ​@saulcortes6802

THERE'S a CHEAPER option ADD A COUPLE OF SWICHES AND DONT Tell ANY ONE, TURN BOTH OFF BEFORE YOU GO TO BED, YOU'LL SLEEP Better, TURN BOTH On IN AM AT EVERY DESTINATION TURN off ONLY ONE.

if its a fresh title or not in their name, Run......

This is a biodirecional

My friend sell cars I stopped clearing his codes just cause.

says $560

Ridiculous paranoia and an edge case. Not denying it happens, but a review of the scan tool mainstream functions would be much more helpful.

So....... what if a thieve has their own scanner to reprogram the key? 🤣😂

@jamesguzmanii9812

4 жыл бұрын

They wouldnt be able to access the interior to reset it because that key is no longer valid I would imagine

Your promotion code is no longer valid... Booo! I was going to pull the trigger and impulsively buy it because of your promotion code..

Inc=incomplete

Does this scan tool program keys?

@dannyyu2932

5 жыл бұрын

IMMO keys functions including add a key, reset key and all key lost, but this functions don't support BMW, BENZ, Audi and so on advanced anti-theft system, it mainly work for simple anti-theft system, what's your vehicle?

@schigara

5 жыл бұрын

Yes

@dannyyu2932

4 жыл бұрын

@@peterbessette7630 maybe you need Autel MaxiIM IM508 which is a professional key programming tool.

@dannyyu2932

4 жыл бұрын

MK808BT only can do a few specific Asian vehicles that have low-grade anti-theft systems, but IM508 or IM608 is a very professional key programming tool.

What a joke. Really come in man change the title of this video. Promoting

There were Inconclusive results in “I/M Readiness” before and after you cleared the trouble codes... it doesn’t mean anything... sit down.