Do you guys ever wonder if Evan and Katelyn ever bought a new can of mold release, or if it's just the same they used years ago because they forget to use it that often?😅

@aether1356

Жыл бұрын

I like to think that have at least 2 cans floating around, not because they used one up and needed a second one, just because I feel like they would lose one, buy another then find the one they lost and both are like 1/4 used because chaos

@arsenic3382

Жыл бұрын

I hope this gets pinned 😅😅😅

@ashalex9638

Жыл бұрын

@Aether honestly, this doesn't sound too far off 😂

@child_steal3r

Жыл бұрын

I bet $20 it’s the same 😂

@EvanAndKatelyn2

Жыл бұрын

either that's the same can or we lost the original can in the move, bought a new one, and the original is hiding somewhere, never to be seen again

Leveled AND Mold Release? Who are you? 😂

@LifeofMe-qg4ep

Жыл бұрын

🎉🎉🎉

@Rin_Morris

Жыл бұрын

Things are very different here on the second channel lol

@EvanAndKatelyn2

Жыл бұрын

haha i know right

@CoPoint

Жыл бұрын

"You're just not yourself, when it's a bit before midnight AND you still have to do all that..." 😁

I've never seen a more accurate representation of starting a craft project at midnight. The different emotions, the manic energy, the realisation that you have done something Very Bad... perfect.

@therussianprincess7036

Жыл бұрын

And the „might as well” energy, trying to ignore all the previous steps that put you there 😂

@vogelvrouw

Жыл бұрын

Its a weird vibe and doesn't happen often for me but it's so nice when you're super into a craft

@EvanAndKatelyn2

Жыл бұрын

you captured it perfectly in this comment

@DaimyoD0

Жыл бұрын

I love the capitalization of "Very Bad." Like Hunter S. Thompson talking about "getting The Fear," like it is a deity or named spirit of chaos.

@1224chrisng

Жыл бұрын

V E R Y B A D ™

When Evan broke the resin a little bit it made me think it would be really cool if they did something similar to Kintsugi. Where when something breaks (or they could chaotically intentionally break something) and then you use gold (for them maybe gold resin or something) to repair it all Back together. So you see the beauty of it’s brokenness. Idk I think it’s pretty-

@that.neurodivergent

Жыл бұрын

Yess I thought that too!!

@FandomTOBY

Жыл бұрын

^^^^^^THIS

@rionka

Жыл бұрын

Awesome idea! It's the process of repairing ceramics traditionally with lacquer and gold, leaving a gold seam where the cracks were.😍😍

@mabelmarie2377

Жыл бұрын

Resin Kintsugi sounds like a perfect Evan and Katelyn video

@aSwiftieTV

9 ай бұрын

THIS

There couldn't be a more perfect plaque for this channel. Whenever the midnight resin mode strikes again you should do a play button for the gaming channel 😂

@EvanAndKatelyn2

Жыл бұрын

that'd be fun!

@doradjdhr8171

Жыл бұрын

@@EvanAndKatelyn2 please do!

@liriosogno6762

Жыл бұрын

​@@EvanAndKatelyn2 guys omg a Minecraft one

@PrpKrm

Жыл бұрын

​@@liriosogno6762 As cool as I think it would be, I think their current mood would lean towards Grounded. Subnautica would have also been cool; a little Alfred-esque squiggle somewhere 🐉

@Zeno21340

Жыл бұрын

@@PrpKrm wait then they could have glitter, galaxy, and an ocean, like 3 of their main types of resin

Evan: Runs with the play buttons like a toddler doing mischief Katelyn: Runs behind him like a mom 😂😂

Actually the fact that it didn't turn out perfect at first and then seeing the process of you guys "saving" it made this video so much more interesting! I feel like you should do a video where you try to save "failed" projects that didn't turn out how you wanted and you turn it into something new, something better! It could be really cool!!

I love the sheer chaos energy that somehow also included levelling AND mould release. I kinda wanna see more late night craziness

Watching this just really makes me want an Evan and Katelyn x Holo Taco collection. I so badly want an Evan and Katelyn manicure to wear while watching your resin projects.

@datgaydangernoodle1315

6 ай бұрын

OMG YES

The glitter sunk to the bottom because of the density of the glitter filled resin and the extra time the deep pour stays in a liquid. I have had the same thing happen when mixing alcohol inks with mica powder. Also this is used in the resin "petri dish techniques", which I dont recall if you've tried before.

@Kennachu

Жыл бұрын

They did make a petri dish incense burner a while ago I think

@Skkonn

Жыл бұрын

@@Kennachu I believe you, even if they did, I wouldn't expect them to remember it when making something at midnight.

@Kennachu

Жыл бұрын

@@Skkonn yeah me neither

If you fill the mould to just before the top (so the little play symbol isn’t connected to the poor via other resin) then you can choose which side you like best before finishing the piece :3

@corneliastreet2491

Жыл бұрын

Smort!

I'm FINALLY about ready to do the pour on my 8 foot wide standing desk & this was almost EXACTLY what I had planned. Nice to have an idea of how it might turn out. Thanks for sharing you guys!

@EvanAndKatelyn2

Жыл бұрын

good luck!

@RivLoveshine

Жыл бұрын

I hope your project turns out good!

@qwqk0xkx

10 ай бұрын

How'd it go?

You two could do resin nail art. Undecorated press-on nails would be perfect! Well, the curve of them might be hard to work on, but UV resin should work really well.

@xXuberflutesXx

Жыл бұрын

Oooh this would be fun! Galaxy nails! Joobie nails! Unicorn sparkles oh my!

@heather_bee

Жыл бұрын

I really want to see Evan's interpretation of nail art lol

@FandomTOBY

Жыл бұрын

if they were to work with uv resin (unless there's uv resin that's safe for skin and nail art?? I have no clue...im not a nail person) they'd have to put the nails on a fake hand first but that would be pretty fun to watch!

@CraftyCheshire

Жыл бұрын

Yaaaaaaaass. Do it! Do it now!

If you want larger stars, i'd recommend drawing them on with a white marker or something like that, and then either leaving it like that, or doing a final resin pour over.

I never liked the OG it had a great concept but ended up looking a bit odd but this one I’m obsessed with! The fact that it required chaos felt super appropriate 😂

@micheal2458

Жыл бұрын

Agree, the colours of the first one turned out kinda... bad 😅 This one is gorgeous

I clicked on this so fast, like it was gonna be something magical, like unicorns materializing, or a resin door to Narnia😂🤷‍♂🤷‍♀ This is one of my favorite channels, always good vibes🥰🌞🌈💝

You guys should try resin 3D printing I don't think I've seen you do it and it seems fitting for the channel!

You two are too cute. I'm so glad that Evan went in with the sander and saved it, it came out looking beautiful at the end!

Just so you know (cuz I'm used to show cure resin and this happens to me way too often), most glitter tends to sink to the bottom (front) every time. There are a few alternatives that don't too much, but rarely worth the effort

@singingwolf8997

Жыл бұрын

Would it be better to dust the mould with mica or something before pouring rather than adding glitter to the resin?

@riuphane

Жыл бұрын

@@singingwolf8997 if you add the glitter to the mold, it generally keeps, and micha mixes in pretty well without settling too much. Another trick is to let it cure for a few hours before adding glitter and it won't sink all the way

Love these second channel videos, so fun and chaotic

You should make a mold with small tools. Things like stir sticks, scrapers, paint pyramids, etc. Then when you have left over resin you just pour it in this mold and make disposable shop tools.

the chaos plaque made by the chaos couple this is perfect!!

Leveling AND mold release?? Makes me want to go be responsible and go tackle my sink of dishes

This video made me realize it'd be really cool to see yall work with a clear mold, so you could see the underside while you work

E&K when doing an important pour: *forgets mold release and forgets to level it* E&K doing something silly at midnight: *remembers them both*

I appreciate how Evan's most chaotic choice (causing the crack) wasn't even at midnight.

In school, in shop class we made resin keychain and charms, and after we sanded them down on a belt sander, the teacher gave us this paste in a tube to polish them back glossy. I think you should've used that paste on top instead of the lumpy UV resin

Katelyn is so tolerant to Evan's chaos

I wasn’t feeling it till you put the mental in. It’s amazing!! It finished it up perfectly!

Im still outstanded as how yall havent reached 10million. Yall are so great.

DIY idea 💡 Somehow add a resin time checklist to your workspace that looks cool or cursed so you are always reminded to level 😂

They have become so great at fixing their mistakes and problem solving, it turned out gorgeous!

I think the extra glittery edges and the slightly lumpy surface add to the galaxy vibe

you should look into trying to polish sanded resin instead of pouring the last layer.

Thankyou guys. It's a massive confidence boost in my own projects seeing results that others were also unhappy with. You could have easily decided not to publish this.

As an artist, I can really relate to spending hours on a project only to start hating it and wanting to start it all over but feeling obligated to finish because you've already invested so much time in it already and its so close to being done and hoping you can somehow still salvage it ; v ;

Amazing video like always

Apparently a bit too much sanding created a bit too much heat and warped the resin. Carefully using a heat gun and clamping between two smooth boards might have fixed the problem. Honestly though, if you wanted the final layer to come out perfect you should have just used the mould again with a thin layer of clear resin and dropped the piece back in. Then it would have been perfect. Still, it turned out pretty good in the end so I say you still won. 😁👍

Would be fun to see you guys make a mood ring resin play button

so if you guys have this problem again I would suggest taking something nice looking and peg shaped of correct length to allow you to place the project back into its mold with a slight gap. You then fill the gap with prepared resin and wait for it to set. From there you well I think you get the idea. Additionally I watch a channel called Ben's Worx's and they turn and sand and polish resin into amazing creations so go check him out for inspiration and how-to for your own projects.

You definitely redeemed yourselves after the initial demolding! It turned out amazing! And congrats on 200K!

i know that i rarely ever comment on your videos, both the main and this channel, but i just want to say that i really, seriously appreciate that you guys add subtitles. lootsss and lots of love. thank you so much! ps. i enjoyed watching this video too!

something interesting you should try is putting the resin in "reverse" the dark colors first and cparkles and clears last, i think that would make the front side look better almost always

the Aliens are back! My favourite adds by far. That turned out really pretty after the modifications. The one thing I am learning watching these resin pours is that with long cure resin; glitter sinks x)

The glitter always comes back to haunt them I swear 😂

the end result turned out so well!!!! i love the galaxy colour with that bright pop of reflective chromey colour! Very nice contrast.

Leveling AND mold release? Getting crazy in here! XD

While watching I was thinking glow in the dark spots in layers for a star effect idk maybe for future projects if it's possible. You both are so very talented I love watching you two create together 💕

At the very least it's a good way to practice correcting problems. And it's very fitting that it broke and was fixed -- make, fail and all that!

genuinely appreciated that moment

Even endlessly creating more work for himself is about the most relatable thing I've seen this year

This video proves that they both only do levelling and mold release when the stars align at midnight and both are outta their senses 😂

All of your projects turn out so beautifully, so it’s very relatable to see that you all experience the wacky idea > oh no it’s bad > wacky idea to fix it cycle just like everyone else 😂 (I’m not quite at the end though - maybe you’ll magically make it all work in the end! But I kind of hope not, just because I like project fail representation)

The final product looks great!!! So shiny and pretty 😍

@datgaydangernoodle1315

Жыл бұрын

The video came out 9 minutes ago 😂 did u skip to the end or are u just guessing 😏

@melonique

Жыл бұрын

@@datgaydangernoodle1315 you see it at 8m! ;)

I love this. It captures the risks inherent in being truly creative.

They’re slap happy I think

Final results seem so worth it! It’s stunning!!

Woah!!!! The texture is actually really really interesting that I would want to feel it!

pure sleep deprived gremlin energy and I love ever second of it

I think I would have tried to "back light" the original. But with light from the front since you liked the back better. Carve out the play button and flip it around so the back is now the front. Add a little more resin to hold it in place. If you made that resin clear that would have shown the light in that section more super backlighting the play button. Probably just as chaos as what you guys did, BUT WITH LIGHTS!

Bartender The Right Mix was such an old pull. I loved playing that game when I was younger lol what a blast from the past.

Your videos make me feel better 💜💜💜

yay you leveled it and put mold release

Yay! You guys posted!!!

You guys should build a table to with leveling legs as a project??!!

Today I've caught up on many videos, I've laughed a lot, just what I needed! Thanks guys.x.x.

All that glitter shinning in the sun was so pretty. It was beautiful. Was is pleasant to look at, not so much, but oh baby did it sparkle.

Your videos are so wholesome, they help me fall asleep, and I mean that in the best of ways, have a good night🥰

i like this better then the original one you guys made! its so pretty

I love it, it is even better than the first one.

The music choices in this video is perfect 🤩 always enjoy your videos. That glitter in the sunlight though 😍

I can't be the only person who did a Michael Scott "NO!" when alien Evan ate the chrome bites.

It looks great!!!!! ❤

I love that you guys learnt absolutely nothing (except mold release) from the first one you did where you also suffered from sinking glitter. It ended up looking cute though :)

It’s unique! 😊

0:40 OMG the growth! They remember to do it before poring

😍all I want is this relationship! You guys are so fun and cute to each other. And honest too. Love love love! makes the channel 1000 times better

The "Joonie wants ham" on the whiteboard in the background is amazing

You brought back so many memories with the image of the bartender game!

It does look really good at the end

omg that leveled it AND put mold release!! :O

I honestly think the little bit of lumpiness in the final product adds more character, and is generally fitting for this channel lol

Nice video. I liked the unplanned feel of this projet❤

I couldn’t help but think you adding a glossy glitter taco over the top😂 looks beautiful you two!

This turned out so so so amazing!!! You'll have to use the same technique again, but to use the "front" side and not the bottom, I hope that makes sense, haha!

Y’all should play roulette with resin and make some random items in random colors/styles. That would be fun!

Glad to see you guys having fun even with the project fighting you the whole way! Also when it comes to the the project no longer being level have you considered that it might’ve been warped by the heat while you were sanding outside? Rather than the sanding itself? I’ve seen others experiment with bending resin in the sun and it seems way easier than you’d think haha

I actually really like it.

You guys did level AND put mold release?! Which timeline am I in??? This can't be real 😂

I mean I found the first one to be beautiful as well but the second one is more calm and even!

Its beautiful ❤️

im so glad that there are other couples that are as weird as me and my husband are at 11 57 at night

I love the chaotic energy of this one! Congrats on 200,000+ subscribers! You guys should have cute work aprons to save your clothes! Might be a fun project?

I'd love to see you guys attempt this again but put the glitter on the top/back as the final pour. Or no glitter at all haha. I must say though, Evan's chaos is always interesting to watch.

I thought for sure the mess ups would be forgetting to level or put mold release on it. I was wrong.

Omg the PURE CHAOS of this one 🤣 But, tbh the end result was great!

I think after i saw the glitter i would've smashed it into shards and then placed the shards in clear resin in the same mould. But omg i'm so glad you saved it, its so pretty!

I've actually had some of their foods, and it's easy to help make and delicious to eat. A great way to try more recipes without all the guess work

The chaos shirt was very appropriate for the tail end of this video

Evan for president 2024, “you can sand anything.”