THANKS FOR 100K SUBS YOU CHAMPIONS!

@devotedbrand

2 жыл бұрын

You deserve everything! You have kept it real from the jump 💯💯💯

@mechca9990

2 жыл бұрын

Congrats!

@user-fg8rc5fw8s

2 жыл бұрын

congrats from Russia)

@baylenbrown8560

2 жыл бұрын

Thanks for sharing your journey with us, man! So rad to see you getting the subs you deserve

@bigERV

2 жыл бұрын

Thank you sir... For doing the fucking work.

Congratulations on 100k!! Dude, I'm so stoked! So many successes, and to many more! You've been an inspiration! And that CFH ML is so sick on your wall. Dime forever.

@leestuart38

2 жыл бұрын

Thanks man. I've got that guitar tattooed on me too 🤘🏻

Congrats on 100k! Found your channel from our twitter convo! Keep up the great work man, cool channel!

@leestuart38

2 жыл бұрын

Thanks for checking it out man 🤘🏻

We bought the Dual Air early last year and this is the FIRST video (at least anything worth watching) I've seen using it! Thank you Stahls for hooking this man up! It made me want to start making them and we will be doing that soon! Keep up the great work homie.

@leestuart38

2 жыл бұрын

Thanks a lot man, that's really cool to hear. Can't wait to make a video actually using this thing 🤘🏻

I'm hella jealous of you, we started screen printing around the same time, and you're miles ahead of me. I'm still eating spaghetti, while you built and outfitted an entire shop. Much respect.

@leestuart38

2 жыл бұрын

Hey man I was eating spaghetti for 2 years before I got into printing just to save up to get my start, so don't worry about that. Keep putting in the work every day and good things will happen 👊🏻

Coming together nicely man! That dual heat press is a tank! 🤘🤘

Congratulations once again on the 100K 🥳🤙🏼 My wife started doing heat oressing this week so I sent her this video as something to look forward to since she's stoked about the whole process. Keep it up dude 💪🏼

@leestuart38

2 жыл бұрын

Thanks a lot, and good luck with the heat press!

@Smallbore2wheels

2 жыл бұрын

@@leestuart38 thanks it's one of the cheap "crafting" ones but the first few onesies she made for our you gest daughter with infusible ink look pretty good

As a kid my parents had a small silk screening business in East LA and unfortunately had a falling out. My dream is to revive it and become more successful then what it used to be. Gunna be binging your videos to learn more

@leestuart38

2 жыл бұрын

Good luck with it! 🤘🏻

In a different life - I wish I lived closer - It would be an amazing experience to learn your craft... Love the videos and your journey.

Congrats on 100,000…. starting out and we have learned a ton from your channel! From video content to equipment, AI tutorials = tons of help Thnx for the label template pack lets grow!! Thanks Lee, keep killing it !!

@leestuart38

2 жыл бұрын

Always happy to hear that these videos help out. Thanks a lot dude 🤘🏻

@brentmooy1623

2 жыл бұрын

@@leestuart38 if this upgrade mean you would be selling your manual auto clam, I would be interested, it would look/work really well beside my 360 IQ hat press.

Oeeehhh you got all the toys that tshirt designers love and dream off. I can't wait to see it all up and running, you are gonna make some magic.

Congratulations on 100,000. Thank you as well for inspiring me to keep moving forward.

@leestuart38

2 жыл бұрын

Thanks a lot man it's cool to hear that 🤘🏻

Amazing! Congratulations on your new shop and the 101k subs!

@leestuart38

2 жыл бұрын

Thanks man!

Congrats on 100K. So well deserved. You worked your ass off to get em!

@leestuart38

2 жыл бұрын

Thanks a lot dude 👊🏻. Now I have to try to add another zero to that

Congrats on the 1K brother

Congrats on 100K 💥

Hey what is the best heat press and cost effective one to use when starting out as a beginner using plastisol heat transfers.

Everytime I see that beautiful all black building and it's size I'm so jealous and inspired! Keep rockin' Lee!

@leestuart38

2 жыл бұрын

It's already too small! 😂 Thanks!

Wow man, this heat press is insane ! Can't wait to see the content you are gonna make with it!

@leestuart38

2 жыл бұрын

Should be pretty interesting. I have a few cool ideas 💡

i love the videos you make and you are one of the reasons i decided to get into screen printing

@leestuart38

2 жыл бұрын

Hell yes, great to hear. Thank you 🤘🏻

Dam Lee, You are 1 Blessed Dude...💯😁!!! All these boxes... It just don't Stop. I know you spent a Small Fortune but All that Love/Sponsoring from these Major & Amazing Brands... You've got some Beasts in there!! Congrats on the 100K & SP Award. Dude you'll def hit 7 figures by the end of the year with All Dem Babies. U Dam Sure found ur Flow... Keep Grinding!!! 💯🌟🔥

You are so inspiring! I would absolutely love to have a shop like this one day! 🙌 💪❤ Congratulations on the 100k subs! 🎉

@leestuart38

2 жыл бұрын

Thanks!

Hi Lee, We have the fusion I.Q here in warn, summery Point Cook, Australia and its really cool. the semi auto nature of this press has cut our production time significantly. Its expressive but worth every penny. We have it hooked up to an AEG 'stealth' compressor so even with the compressor running (which isnt often) is still pretty quiet. Lovin your new 'office'.

@leestuart38

2 жыл бұрын

I'm really excited to see the production speeds on this press once I put it to work 🙌🏻

And congrats reaching 100,000 subscribers! 🎉

@leestuart38

2 жыл бұрын

Thanks!

Congrats on the success, you work your ass off for it. Gotta love Manitoba winters!!

@leestuart38

2 жыл бұрын

Thanks!

We used these at Adidas for all of our special embellishments and they’re great machines and work fantastic every time once you get the hang of them. They don’t get that hot unless you touch them directly and last awhile from what I’ve seen!

So baller to see you fucking with all the new machines dude, you came a long way. Keep up the great work.

@leestuart38

2 жыл бұрын

Thanks dude 👊🏻

Like always man another great video 👍

Congrats on 100k Subscribers!

@leestuart38

2 жыл бұрын

Thanks!

Hell yeah bro I’ve been here since the wheelies! And I’ve actually added people to your channel that didn’t even know what KZread really is haha!

@leestuart38

2 жыл бұрын

Hell ya thank you 🤘🏻

NICE!!! congrats man!!

@leestuart38

2 жыл бұрын

Thanks dude!

That heat press was a game changer for us. Zero regrets! One thing I would say is that I wouldn’t recommend the pre treater and the heat press that you cure your pre treat on near the texjet. It causes a few issues with the white ink when printing but we were in a smaller space than yours so you may be good! Just thought I’d give you a heads up

@leestuart38

2 жыл бұрын

Thanks for the heads up. I've got the embroidery machine in between there and I'm going to space things out a bit more hopefully once I'm done this place and can maximize the floor space

ahhhh mannnnn you got some cool ass set up there

Send that laser alignment system collecting dust my way 😂 Always enjoy your content! Keep crushing it

That machine looks smooth! 🥵🥶 Congratz, man!

@leestuart38

2 жыл бұрын

Thanks man 👊🏻

That's Awesome Brother Congratulations!!

@leestuart38

2 жыл бұрын

Thanks!

that heat press is dope and super productive!!! ""Got the Same One!! Killer Man Congrats!! Power Supply is the Challenge....

Congrats on the 100k. I've been watching for a while and I even managed to catch the "live" you did when you found out about the 100k. Just 1 question we ALL want to know - Did you ever manage to get Sushi? I know they were closed that night but . . . ? Thanks for all you are doing! :)

@leestuart38

2 жыл бұрын

I did the next day, ordered exactly $100 worth so that superchat tip didn't go to waste haha. It was glorious

Congrats man, you deserve it!!

@leestuart38

2 жыл бұрын

Thank you!

Hey man Do you have any recommendations for printers to buy to create the transparencies for screen printing. Thank you

@leestuart38

2 жыл бұрын

I use an epson t3270 now, but I started with an epson p400 that was rock solid for 3 years. Good entry machine

Love your content consistency man, your creative effort with humor mixed in is dope man! Im excited to see you sweating bullets using all this stuff I know you'll be choked in orders sooner than later lol

@leestuart38

2 жыл бұрын

Haha I appreciate that dude!

Congrats on the 100k. That hot tronics looks bitchin. Can’t wait to see everything in there place and things running. The shop looks awesome. Hella different to see compared to the previous years of your basement!! Keep hustlin my dude!

Wow just wow. That's awesome. Way out of my realm

Congrats! Awesome videos

@leestuart38

2 жыл бұрын

Thanks!

I have been trying to figure out if this press would be a good option for me. I do a lot of DTF transfers and I need to press it for 15 sec, peel, and 5 sec. Do you know if it could change the seconds automatically? or do you have to switch it in the screen back and fourth?

@leestuart38

6 ай бұрын

You can program it to do up to 4 different press times and pressures on each side for each preset. So you'll be able to do exactly what you need

Yo Lee quick question: What size screens do you use or rather what is the max size print you offer? I had a couple jobs last week for some seam to seam back prints about 23" tall. I got some a2+ frames and had to diy a platen for that job and the screens were still to small. Im thinking I need to go a1 but I dont know if my press will hold frames that size. I really want to be able to offer jumbo prints - it gives us an advantage over the big players plus I really want to experiment with jumbo sizes for my own brand.

@leestuart38

2 жыл бұрын

I use 23"x310 screens now, but was on 22"x24" in my original shop

How’s the dual heat press holding up? I’m concerned it might catch my arm if I’m not done loading the shirt

Yesssiiirrrr beeen waiting for another video this lit 🔥

@leestuart38

2 жыл бұрын

🙌🏻🙌🏻🙌🏻

Do you have a video on heat press for beginners and what to buy

Congratulations love your content keep it up🤙🏼🤙🏼

@leestuart38

2 жыл бұрын

Thanks dude 🤘🏻

Can you do a video on how you scaled up to get all the new equipment and the building?

Congratulations on everything......Salute..100k.

@leestuart38

2 жыл бұрын

Thanks man!

have you done a full review video on this heat press yet? Would love to hear how this bad boy has preformed over the past year

@leestuart38

Жыл бұрын

Not yet but I plan to 👍🏻

Hey lLee, is it possible that you can install a partial mezzanine floor and relocate some of your film output, ink and media storage items up top?, maybe even your office / art room, looks like you've got the ceiling space, just a thought,

@leestuart38

2 жыл бұрын

I eventually plan on adding a mezzanine to this shop once I switch the overhead doors around, I talked about that towards the start of the project. Later this year I hope

Dual Air Looking Good 👊

Congratulations 🎉

Casually scrolling on Facebook and a see Lee has a new video, fuck yeah! KZread time!

@leestuart38

2 жыл бұрын

That's what's up 🙌🏻

Love the vids!

@leestuart38

2 жыл бұрын

Stoked to hear that!

Have you ran into any issues where the press wont shuttle in one direction? Mine will shuttle right but wont engage when shuttling left

@leestuart38

24 күн бұрын

I haven't had that issue but I've heard of it happening. Now that I've been running this press for a few years I've noticed a lot of things with it that I don't like

@STORMThorgood

24 күн бұрын

@@leestuart38 yeah we've been having some other issues as well leading to some defective products being sent out. Trying to look into alternatives to suggest to the boss man

Many days I start work at 8-9pm and go till 2-3am. Grab a few hour of sleep before my kids get up at 7 and do it all over again.

I noticed that your heat press was a swing arm heat press is there enough room to actually use it on that small table not to mention the ink buckets being in the way

Oh man! Can't wait till we can get our job in the massive queue you'll have haha.

@leestuart38

2 жыл бұрын

You've been waiting a while. We'll get you up towards the front of the line if you're ready when we are 🤘🏻

What laser alignment system are you currently using that you like? i agree that the Stahls stand alone laser is garbage as i own one also.

@leestuart38

Жыл бұрын

This press has its own laser so I've been using that, even though it's still pretty bad

@stevekuker5583

Жыл бұрын

@@leestuart38 Thank you

Congrats and super heat press

Love it, I've been waiting to create clothing for 20 years, never has the guts to invest and do it. I'm trying to figure out what I require software and hardware for it all. 100k well deserved. if I was in the USA I'd ask to shadow what you do to learn it all.

@leestuart38

2 жыл бұрын

I'm Canadian 🇨🇦. Lots of good info for what you'll need here on KZread between my channel and the others covering the print industry 👍🏻 . Thanks man

If been there since the first screen printing video u went from rags to riches in the personalized world good job brother keep it up

@leestuart38

2 жыл бұрын

Slowly clawing my way up to the top, this is only the halfway point. Thanks for being a part of the journey

Your vids are awesome !! But [ a good but ] seeing an ad from fn ink and its you in the ad is pretty sick , i dont even dabble with screen printing but super inspiring stuff man keep it up glad to be in the 100k 🙏🏾

@leestuart38

2 жыл бұрын

I have KZread premium so I haven't seen an ad on here in like 4 years haha, but that's pretty awesome that I'm in ads on my own videos 🙌🏻. Thanks a lot for the support!

Absolute madlad

The sleazy grin Lee gets everytime he says DTF, priceless..

@leestuart38

2 жыл бұрын

I've come up with so many greasy lines thanks to having DTF here now 😂

Looks great! When will you do videos on the polyprint dtg?

@leestuart38

2 жыл бұрын

Very soon. Once the shop is done

congrats on the new killer equipment as well as the 100k

@leestuart38

2 жыл бұрын

Thanks a lot 🙌🏻

I hope you have better luck than I have with my Fusion IQ. Don’t get me wrong I love my press but have had numerous issues with it in the year and a half I have had it. Yes I bought it brand new not used!

@leestuart38

2 жыл бұрын

I've had a single station fusion IQ for 5 years and it's been rock solid. Hope this is the same

congratulation to your new shop. I like the fonts on your first shirt you are using in the video. How about a tutorial 🙂 regards from Germany

@leestuart38

2 жыл бұрын

That isn't my art work but maybe we can do something like that eventually. Until then there is my latest photoshop tutorial, it shows how to get the chrome effect that's on this design

What camera do you to record videos

@leestuart38

Жыл бұрын

Sony FX3

so inspiring

I might've missed it, but what is the heat press for? Isn't it used for transfers? Are you going this route?

@leestuart38

2 жыл бұрын

Yes I do transfers and DTG here also

Plans go sideways… that’s just life and at least you have a positive attitude and choose to adapt. Congrats on 100k. It’s well deserved and a reflection of your commitment to improve and well… being super OCD and anal certainly compliment your end product. Love the content always.

@leestuart38

2 жыл бұрын

Gotta be quick on your feet and have the ability to adapt quick in this business. Thanks man 👊🏻

You are still our hero.

what are your thoughts on GEO-KNIGHT heat press units ?

@leestuart38

Жыл бұрын

Never used one, but they definitely aren't as feature rich as these

LOL. Austin Powers stuck in the hallway. "YEAH BABY!".

@leestuart38

2 жыл бұрын

Makes me laugh every time 😂

Congratulations

That press is looking awesome🤯 but damn dropping $7k on that plus tax and stuff is still out of my reach. Congrats for the 100k subs Lee!🔥🤘🏼

@leestuart38

2 жыл бұрын

It's definitely not a cheap setup, it's more for shops with higher volume output who have a bigger equipment budget. But if you have the work for it the pay off is huge. Thanks for the support dude!

Hello Sir.From where you buy the dryer ?

@leestuart38

2 жыл бұрын

Ryonet

Nice! My fusion IQ press *should* arrive this week after waiting 10 damn weeks! 😭

@leestuart38

2 жыл бұрын

I waited just as long and I'm sponsored by them haha. It's just the global supply chain problems unfortunately

Congrats on the 100K When do you think you will be back up and running? I'm looking to have some shirts, Hats & Hoodies printed and would like for you to do them.

@leestuart38

2 жыл бұрын

Thanks man. I hope to be running again in the next 3-4 weeks

@stickshift76

2 жыл бұрын

@@leestuart38 Awesome! I also hit you up through your website. I will check back at the end of February into March. Thanks again!

Does any one know where to get music for Vlogs? Copyright free

@leestuart38

2 жыл бұрын

Epidemic sound

Thanks Alex for the POS stainless steel tables LOL

@leestuart38

2 жыл бұрын

That one is on me for not looking closely enough at them 😂

Do you have all of your lighting mounted on the walls and not on the ceiling?

@leestuart38

2 жыл бұрын

Walls and ceiling. I like having a lot of light

Holifucknuts, hitting the 100k mark is a legit milestone dude. Well done! Your drive, hard work and attention to detail is clearly paying off. Separate note: Fuck I’m envious of all your snow. We get zero snow in Johannesburg. Makes my snowboard kinda gawdamned useless.

Nice!

Hey man! Are you going to do a crf 110 build soon? Also keep up the great work!!!

@leestuart38

2 жыл бұрын

I'd like to, I have a lot of other stuff to pay for it with this new place first though. I'm hoping that can be a project for next winter

@Hudson12339

2 жыл бұрын

@@leestuart38 Ok! And i just want to let you know your doing a great job!!

Dope

Price this machine ?

Bro... Calm down. You got this. I wish some of those sponsors would come on board and help you with setup. Team effort.

@leestuart38

2 жыл бұрын

They do so much for me already, I've gotta put in the work and make it happen 🤘🏻

@brownsense1

2 жыл бұрын

@@leestuart38 I just don't want you to overwork yourself. I want to see this project when it's complete. I'll be examining most of the equipment you are using to evaluate if it'll be a great purchase for my business. I'm mainly will be focusing on your dtf setup, embroidery machine, and now that fusion dual press. Make sure you are working the shit out of that dual press. I have a Stahl's hotronix heat press and it's been good to me. I need a dual setup

the auto press is a dream piece

@leestuart38

2 жыл бұрын

I've wanted one of these for so long 🙌🏻

@darrinplank

2 жыл бұрын

@@leestuart38 right there with you. I don’t have the sells to warrant it…yet

One thing I've learnt over the years - a workshop is NEVER big enough ;)

@leestuart38

2 жыл бұрын

Agreed

Yes, we deserve some guitar riffs or bike stuff to celebrate 100k lol

@leestuart38

2 жыл бұрын

Might be tough to do bike things with the 4ft of snow on the ground haha. Riffs are a possibility

And... Just like that, I feel vindicated for saying on your original shop reveal that you are gonna need a lot more space almost immediately and that you will probably move everything around at least a few times until you find your workflow. Now I look forward to you getting to work, the changes you will make along the way and then, ultimately, you doubling your space and what will come of that.

@leestuart38

2 жыл бұрын

You were right, I'm out of room before I even started haha. I need to get my ass to work so I can afford to add onto it now

Just when I say again it's started from the bottom now you up.

Wohooo... Bro congrats on your 100K subscriber's 👏👏 And as i mentioned on my last comment. I am from Africa (Ethiopia) you are my #1 role model. I personally want to be you🤤😫

@leestuart38

2 жыл бұрын

Thanks for following along man. Keep putting in that work 🤘🏻