This is how to get the most flex out of an Jeep xj with leaf springs in the rear!

Автокөліктер мен көлік құралдары

We built this rig with only 3500 dollars
Buy the brackets here www.ebay.com/itm/Jeep-Cheroke...
His KZread / @drzfabrication
How to repair lower shock stud on rear axle for $5 (Jeep Cherokee) • How to repair lower sh...
Buy shirts here teespring.com/stores/cherokee...
Cheap Cherokee build • cheap cherokee build
Watch episode 3 Cheap Cherokee Build (Episode 3) • Cheap Cherokee Build (...
Watch episode 1 Cheap Cherokee Build (full episode) • Cheap Cherokee Build (...
Watch episode 2 Cheap Cherokee Build (Episode 2) • Cheap Cherokee Build (...
Watch episode 4 Cheap Cherokee build
• Cheap Cherokee Build (...
How to lift a Jeep xj 6 inches for $600 • How to lift a Jeep xj ...
How to use a double cardan driveshaft in the rear of a jeep xj (NO SYE!) • How to use a double ca...
How to fit 35s on a Jeep xj with 4 inch lift • How to fit 35s on a Je...
The Best upper control arms you can buy for a Jeep XJ/TJ/WJ/ZJ for $100 • The Best upper control...
ideal caster angle
5 to 7 degrees is what I always go for in a lifted xj
S10 leaf springs x2 $30 at junkyard but I bought new to get a better lift $150
Rubicon Express 5.5 coils which gave my 6 inches after settling $99
Lower control arms $99
Upper control arms $99
Lower control arm drop bracket $150 helps improve ride
Rear extend break line $15
Transfer case drop $6 I recommend SYE
Rough country JEEP FRONT FORGED ADJUSTABLE TRACK BAR (XJ, ZJ, MJ W/ 4-6.5IN) $150
ZJ pitman arm free
We have a total of $648 in this lift and we got some nice stuff
Rough county 6.5 lift $1,049.95
Rough. county 4.5 lift $749.95
And honestly my lift probably won’t settle like rough country does but if you have the money just go ahead and buy a lift
I’m just showing you can do this in your backyard on a budget
Cheap Jeep build all parts will be bought off Amazon and eBay
If you guys wanna know how I beefed up my steering here is a parts list! If you wanna see a video let me know
Warning ⛔️ You will need to know how to weld and use a grinder
1995 Jeep Grand Cherokee V8
Duralast Drag link DS1310 $25
2000 Jeep Cherokee (XJ) Synergy Manufacturing Heavy Duty Metal-on-Metal Tie Rod End - 4135-R $46
2000 Jeep Cherokee (XJ) Synergy Manufacturing Heavy Duty Metal on Metal Tie Rod End - 4135-L
$46
Jam nuts for tie rod ends $6 x2
(1LH / 1RH) Tube Adapters $8 x2
1.25in OD DOM tubing got from local metal yard scrap pile 54” long $30
Total $175
You can build it cheaper with 2000 Jeep Cherokee (XJ) Omix-ADA Tie Rod End - 18043.06
2000 Jeep Cherokee (XJ) Omix-Ada Tie Rod End - 18043.10 L handed
If you use cheaper tie rod ends the total would be $111
Facebook profile.php?...
My guitar channel / ronaldleggettjr
#CherokeeRonnie #Projectcheapjeep #CheapCherokee

Пікірлер: 26

  • @josephaldrich283
    @josephaldrich2833 ай бұрын

    I have the same jeep same color!! I came across your video because I have the same problem 4.5” lift on mine 😂 i was looking for reviews on the rough country ones I think I’m funna go with the same ones you got!

  • @88yjvs91xj
    @88yjvs91xj2 жыл бұрын

    I ran those shackle location brackets with the teraflex revolver shackle and it worked great

  • @jonathanamador7748
    @jonathanamador77482 жыл бұрын

    Would I have to lift the front more or are the shackles just for miss flex? Do the shackles give it more lift? Thanks

  • @kjohns236
    @kjohns2367 ай бұрын

    Hey Ronny! I want to get these for my Cherokee but it doesn’t look like they’re available anymore. Can you recommend something similar?

  • @johnr5545
    @johnr554511 ай бұрын

    Thanks god bless

  • @bobhilly546312156332
    @bobhilly5463121563329 ай бұрын

    Would this work on a full sized truck, I’m building a 78 ford half ton and I wanna have it be the best work/offroad/daily driver pickup it can be so I don’t really wanna 4 link it so I can still haul fire wood and what not with it,

  • @Bambam-kl1dg
    @Bambam-kl1dg3 ай бұрын

    What coil springs are u guys running up front

  • @ninjascout468
    @ninjascout4682 жыл бұрын

    Mine has a 2" budget lift 31 Patagonia Mt rear locker and flexs like no other lol and I've done alot of stuff others won't even try 😉

  • @davedynamite1298

    @davedynamite1298

    2 жыл бұрын

    So 31’s fit a 2” lift?? I just lifted my xj 2” with coils up front and shackles in the rear. Next is tires and it’s between 30’s and 31’s.

  • @joncalman8180

    @joncalman8180

    2 жыл бұрын

    @@davedynamite1298 31s will fit. My original set up was 31s on a 2" 15x10" rim. Went with a 3" and running 32x11.50 on a 15x10 with no issues at all

  • @susu-mi7kx
    @susu-mi7kx2 жыл бұрын

    Ronnie, I unclamped the upper and lower radiator trans oil steel lines from the transmission's 3/8 rubber lines they clamp on to, so that I can install new trans oil cooler lines. I did not take note which they connect back to. the top steel line or the bottom steel line(that have the 3.8 rubber lines., can you help a girl out?

  • @pnwroffroad9229

    @pnwroffroad9229

    2 жыл бұрын

    Probably to late to help, but easy way to find out is have a helper start the Jeep with the lines going into a bucket. Run it long enough to get flow, the pressure line goes into the cooler at the bottom port of the cooler.

  • @drewfunck6441
    @drewfunck64412 жыл бұрын

    Cherokee Ronnie what slot hole did you put leaf spring in on the shackle? I have the same shackle relocation set and trying to find the best articulation and currently have it the 3rd hole from the front of hole.

  • @cherryoakieyyc3546
    @cherryoakieyyc35462 жыл бұрын

    Just bought my first xj...came with a rc short arm 4.5...any chance you think pulling a leaf out would make it ride better and possibly even move more then a half inch haha its stiff as ballz....came with the full leaf pack

  • @cherokeeronnie

    @cherokeeronnie

    2 жыл бұрын

    You could try it it might be a little bouncy

  • @danhambrick6331

    @danhambrick6331

    2 жыл бұрын

    You're better off ripping all the Rough Country crap out and replacing it with something better.There is a reason RC is so cheap and now you know why....

  • @cherryoakieyyc3546

    @cherryoakieyyc3546

    2 жыл бұрын

    @@danhambrick6331 I know lol I wouldn't have bought rc, but working on it. It's just what came on the thing. By some dude doing a California tune up

  • @garyvanmeter4911

    @garyvanmeter4911

    Жыл бұрын

    @@danhambrick6331 That's what I did. Never regretted it!

  • @ky0611
    @ky06112 жыл бұрын

    Should you take off your rear sway bar ? Even for daily driving?

  • @joncalman8180

    @joncalman8180

    2 жыл бұрын

    I have no rear sway with absolutely 0 issues. The upcountry package jeep used to do came from the factory with no rear sway

  • @Jon-ko3vv

    @Jon-ko3vv

    2 жыл бұрын

    the rear is so small it does very little

  • @crashtke
    @crashtke2 жыл бұрын

    Dang, all sold out!

  • @svborek
    @svborek2 жыл бұрын

    Remove the rear sway bar. Bingo

  • @cherokeeronnie

    @cherokeeronnie

    2 жыл бұрын

    It’s not enough when your at 6.5 inches

  • @svborek

    @svborek

    2 жыл бұрын

    @@cherokeeronnie at 6.5 it should be taken off anyways. 👍

  • @cherokeeronnie

    @cherokeeronnie

    2 жыл бұрын

    Yeah I took off when it was stock 😂

Келесі