The Hollyland LARK M1 would be great for streaming VR and making video. I am saving up for a new camera right now so can really afford to get anything else. Winning would allow me to stream VR until I can afford the new camera to make videos. After the camera and wireless mic I am going to get a 3d printer to make some items to help with my muscle disorder. I love your videos on the tire rim showing the fails is nice to show that not everything goes perfect.

@properprinting

Жыл бұрын

Hi Eric! I’ve got some awesome news for you. We went through all comments and decided that you are the winner of the Hollyland LARK M1 microphone! You can send me an email or DM me on Twitter or Instagram to get in touch. Congratulations!

@EricRtheModFather

Жыл бұрын

@@properprinting Email sent. This is awesome! Can't wait to try it out streaming VR.

I especially like that this enables integrating custom features, for instance a USB soundcard. If you have a suggestion, let us know!

@razerow3391

Жыл бұрын

ports are on the back for cable management. It's normally not advised you plug anything into the passthrough unless it's just for power... But you knew that right? Tbh I wouldn't trust a 3d printed stand. Just seems rather r*tarded to spend money on a decent monitor and then make the stand mostly plastic... I mean sure if you are going Aldi Budget like you've gone it makes no difference... But for those of us that use a PC a monitor is more important than speakers.

@maciekgaa5215

Жыл бұрын

@@razerow3391 hater hater

@ricardoresendes2859

Жыл бұрын

@@razerow3391 you're entitled to your opinion, but I think you might be missing the whole point of this channel. Additionally, Jon has tested 3D printing materials extensively. He has hung his entire body weight from these "plastic parts."

@noobling8313

Жыл бұрын

@RazerOW Oooh, trigger warning on the car wheel videos for you then!

@taham6757

Жыл бұрын

Or u can buy a laptop and have all of this stuff I mean;-; but just betta design noice

Having 'teringzooi in de knoop' problems when doing any computer stuff is very relatable

@properprinting

Жыл бұрын

😂

Also, I really like the creative engineering aspects of your videos. Making something to fit your needs is fantastic!

@un_ours_blanc

Жыл бұрын

It's what gives 3D printing it's real purpose, it's so rewarding to success on this

LOVE the work on this. The RGB, the thought put into it, and even the REALLY nice stainless tube. I like how it is simply over engineered! You have a lot of confidence in the prints though, I dont know if I would trust them, but if it works, it works! NOW TIME FOR MORE RGB! It makes everything faster. I would love that Lav mic, it would help me with better audio, but I do not NEED it. We have a Tascam DR-10L that I use for my main lav audio and it works fine. It should go to someone who needs it! Would love to compare it to the tascam one day though!

9:26 The monitor mount relying on the layer adhesion of that one black section looks a bit sketchy. I hope it 100% infill!

I like the way you surprice your self every time a design works. After many years you are still amazed of the 3d parts printed. No one has crazy designs as yours.

This is why I like your videos so much! Instead of doing exactly what other 3D printing KZreadrs are doing, you're doing your own thing. Keep that going! This is real content. That is one sick stand you designed and build! As usual, you also show the problems you encounter and your mistakes. We'd make the same mistakes, or new ones, but we're humans, right? I'd like to win the thing you're giving away just because I'm a greedy bastard. I didn't even know what it was, until you mentioned 'microphone'😂 so I definitely need one. Also, my name is Mike, so ginve me the Mike!

I like the idea of adding LED's to the base of the monitor stand! Maybe you could add some integration, so they display the current progress of your 3D printers. Do you like the stacked setup? I'm wondering if I should try it as well, to save some desk space.

@properprinting

Жыл бұрын

That's an interesting idea! I like a horizontal setup more, but that's also what I'm used to. For my current setup, this is the best option.

@pringineer1027

Жыл бұрын

@@properprinting WLED should enable you to easily do the print progress thing I think but that prob won't work with the Corsair strip

@LaurensWuyts

Жыл бұрын

@@properprinting Thanks for giving me your experience! Love your channel btw.

just got into 3d printing myself about 6-9 months ago. love the custom monitor stand, now you got me thinking about making one for my setup

My six year old would love the mic. he has been doing KZread video's and shorts for a little while now just with his phone and has become good at editing his own video's.

You inspire me to get back to what I love doing. Thanks.

Absolutely LOVE it may have inspired me to make a base under my monitors ive been curious about ports like that for a while definitely going to pick some up !

My guy im obsessed with your creativity . Im a 20 yr old physics student that wants to work in robotics and mainly prosthetic limbs and your work has been a great inspiration for me !! Thanks a lot !

I like that you gave a low budget option for the tube.

I started 3d printing when I was given a second hand monoprice 3P, after some serious mods I had it really dialed in, and got better results than the original owner. Now, I have a Resin also. Add to that my love of tinkering and DIY projects at home and this video really had me hooked. Totally love the idea of making your own monitor stand, can't belive I never thought of that. Now, what does all that have to do with a microphone, well, nothing really. But my daughter is making videos, streaming, and a photographer. I would give this mic to her because honestly she would get so much more out of it than I would. Cheers, and keep these great DIY vids coming.

Always interesting to see what solutions you come up with!

Awesome to watch a master in his craft. Very impressive!

Sweet build! I'm excited to see what you come up with for the custom case. I'm working on a pure custom setup for my new PC build.

I really enjoy all your content, the great attitude is influencing!

I like the way stainless looks with the black bezels of the monitors.

I always love your videos and epic projects and the roller coaster ride of them starting, being excited, something doesnt go to plan, but then overcoming! I have a small youtube channel and could definitely use the mic to up my audio game! I just use whatever camera im usings' mic. Whether its my cell phone, gopro, or old DSLR.

Man, you come around the corner with pushing 3D printing to the maximum! Very inspiring, to say the least. The lav mics would be a nice addition (and kick in the butt) to finally start my 3D printing/Additive Manufacturing/Surface engineering podcast & videocast that I've been planning for months. It'll be great for interviews in the industry 🥳

Wow, that was a great idea and execution. I wouldn't be able to design it that well but it looks fun to try.

Love the stand! You got me thinking of the kick ass presentations I could do with that mic and green screen. The joys of working from home!

I am working on my own now stepping up the game. New sub love your videos so far

I really like how customizable and applicable it is. One of the most under utilized areas is the stand so well done. As for the microphone, I plan on using it record my parents and in-laws for my kids. I want them to have some recordings events in their life for my kids.

2:50 I love it when I'm thinking "oh that could work as a cheaper alternative" then it is mentioned in the video.

This turned out awesome! very clean

I need them so I can listen to them sick videos made by Proper Printing; Specially during the montage. Great work, keep it up!

I'm an aspiring content creator and that mic would open up alot of possibilities for me. Love the stand by the way.

That mic would be a great addition to my desk set up that’s still a work in progress… wish I could add an awesome monitor stand like yours to my set up.

Love that you're using reaper! Hands down my favorite software for audio. That mic would be awesome for when I'm blowing glass! I've been looking for a solution that keeps the mic away from the intense heat of my torch. Looking forward to seeing what you do in the new space!

As always, you engineering and content are great. I have 4 monitors all with various brackets. I think I will see what I can engineer with my 3D printer.

Man, this monitor stand is one of a kind! Really like it 👍🏻

Love watching you make all these things. It looks so effortless compared to my struggling just trying to get my printer level or cut a straight line. Would like the mic as I spend my days in online meetings and my previous wireless headset died. I’m currently tethered with a USB mic

Watching your videos are always a blast and get me inspired to start my own YT Channel, although i probably wouldn't do engineering project like yours, i could never do those things

The work louder keyboard would fit this aesthetic perfectly!

WHOA! Such a 3D print room! So jealous!!!

Nice! This gives me the faith I needed in printing a replacement stand, current one sticks too far back so my monitors have to overhang the desk. I'd like that mic for recording my upcoming project videos (script stage) since audio quality has always eluded me in previous channel attempts. They do say bad audio is worse to have than poor video quality. Anyway keep it up!

Fantastic work as always!

I'll be honest, never heard of you, was thinking about upgrading my monitor setup and BAM! This video appeared on the suggestion card after the last video I watched. Very cool idea! I'm glad it's stable, and you have my empathy on the short cables, I've taken to just spicing mine together. It's not ideal but it creates less e-waste.

I bet you could also mount those speakers or custom speakers to the same stand to free up more desk space. Or maybe some sweet mounts to put them up on the wall? Now that you have all that build area it opens up a lot of options! Thanks for sharing!

That's a pretty slick design. I didn't think it was going to support both monitors but that looks like it worked really well! I'd really like the microphone setup as I'm really hoping to start a youtube channel for 3d printing, cnc and maybe some hunting videos as I'm trying to get into that more. Thanks for the awesome content and all the crazy projects you're doing!

yup, 3D design & print at its finest. Innovative as it gets.

This is a pretty sweet setup! Maybe the next project could be printing a different case for your speakers?

That is awesome looking, Nice job, I'm jealous.

awesome video! Lav mics would be a game changer for my set up.

I found you channel after watching cnc kitchen I do find your content more interesting and the fact that you 3d printing makes real world applications and you give anyone the confidence to try making 3d printed designs, I would love to add the mic to my list of stuff I have be getting to start a KZread channel about cooking gluten free for people with or without celiac

I teach 3D printing at our college and those mics would be a step-up from the old one when I need to record lectures, also that RGB + audio combo is begging to have a synthesizer response, really get the rave vibe going

"I can overengineer the crap out of this thing" LMFAO - totally manic and incredibly inspired!

what an incredible setup, with that adaptability you can basiclly have all your IO of all the componets just in front of your keyboard

I love the idea and the work you've done! As a heavy multidisplay user myself (heheheh, five in fact! 😁 ) this does give me some ideas. I've always chosen to go with either wall mounts or mounts installed at the corner of the table or through the table. Keeps things handy and additionally clean looking. PS. Round aluminium table legs can be used for monitor stands pretty easily. Cheap, sturdy and quite nice looking also. Some even can replace or extend original tubes in monitor stands!

Nice work ! The mics will be a geeat addition to my setup.

Doing a similar pole mount system for a monitor in my van conversion that will rotate around and face the wall for attachment when driving. I'm using a bicycle seat quick release clamp in the design so that I can move the monitor up and down on the pole as desired.

@properprinting

10 ай бұрын

That's a smart solution!

I am digging the monitor stand idea! I have 3 wide, and one above. Having 3 monitors sitting on the desk is annoying, and 3 wide stands are stupid expensive. The 4th is mounted to the wall. This gives me some ideas! I could really use a wireless Lav Mic! My current $20 Sony is always strangling me, or getting yanked out the computer! The ability to connect to a phone, DSLR, and computer opens up lots of options, and the 2nd transmitter would be a huge bonus when one of my kids wants to jump in!

Awsome stand mod ! one of these days i'll watch all the way to the end ;)

Awesome project! when you started drilling the holes in the tube i was like.. surley a friction mount will work just fine.. then i realised it was for the OCD cable routing haha. awesome video. the mic looks awesome and being wireless is always a massive bonus and they look like a really great package!

Honestly stacked monitors setup is underrated. 3x side-by-side is still king for most scenarios, but 2x stacked is the the most useful "specialized" setup for monitor speakers, narrow/busy tables. Add a portable 11.6/13 inch touchscreen monitor on a VESA arm attached to the side of a table and it's a perfect multipurpose setup. Top monitor for "standby/monitoring" tasks Bottom monitor for primary work. Vertical touch monitor for either social or misc tasks.

It's nice to hear people like you don't always think of a 3D printed solution first thing. Sometimes it takes me far too long to realize I can design and print my solutions.

I was looking to 3d print a sleeker vesa stand for my monitor and it's a bit much for my needs, but it's really cool that you can design such a thing. I hope i'll be able to design cool things now that I have a 3d printer. Also the hollyland mic would be very useful for me, I actually wanted to get a new mic that picks up more audio for my meetings since I move around a lot and it would also be useful for when I'm doing PC build streams since that requires a good amount of moving around. I didn't know such mics existed, but I'm very interested now even If I don't win at least I learned something.

I had subscribed to this channel since the robust Ender 3 pro design video. I always love the approach you take to implement practical printing and showcasing it in such a good manner. If i win the wireless mic i would be using it for my youtube videos. Thanks for the awesome videos. Cheers!

I love the monitor stand! I currently only have an Ender 3 v2 so I don't quite have the build volume for a good monitor stand like that but I love the idea. I am trying to create a series of KZread videos on how to program a Lego robot as well as a FRC robot. I bought an onn podcast mic to do the audio but it really isn't the best suited for the work. If you have a suggestion for a free video editor that would be nice. If I end up getting a bigger 3d printer I may very well create a similar stand.

Whoa! What a nice build... I'd love to see if that mic is also good at picking up my bass guitar, as well as my crappy voice. The dynamic range in both is out of this world!

Wicked project. Looks like lots of thought went into the planning of it. I’d love that lapel mic cause my early version Sony NEX has its audio accessories discontinued. :(

I would love the mic for family videos to capture the conversation and funny memories/inside jokes!

Love your clever and elegant design. Great video too. I'm not into the RGB craze that seems to still be going on. I think the lighting would be handy if I need to plug something in, but I would want them off the rest of the time.

Hey sir! Great video as always :D Im kinda inspired to make a new base for the stand i have now! That mic looks awesome and would be a sweet additional to anyone's setup :)

Altijd leuk om te zien dat een 3d printer niet alleen voor serieuze prints gebruikt word. De monitorstandaard is een leuk voorbeeld, niet omdat het moet maar gewoon omdat het kan. en uiteindelijk is het toch nog handiger dan de standaard versies.

That is really nice looking. I love that project. My friend and I are starting a KZread channel. Everything from furniture restoration to guitar building and I’m huge into 3D printing which is how I found you. I really like your setup.

@properprinting

Жыл бұрын

Awesome, good luck with your journey!

My son has finally convinced me to start streaming some of our crazy ideas, my music, and my (apparently) hilarious attempts at gaming. The Hollyland LARK M1 would give me the freedom to forget about the mic and just create/perform.

Great video!! I now want to print a new monitor stand! I want the mic to record some awesome videos when moving to Europe in month or so

I am just starting a video blog and could really use a microphone since all I have is the built-in mic in my laptop. It would be great if you posted the files for the stand, and I love listening to you, especially because of your accent.

I just have to say that you are a serious inspiration not only with 3D printing but also looking at the world around you in different ways and looking for ways to improve that world around you. Please never change! I have been a huge fan for a long time and always look forward to new videos that you make as they are not only very educational but also very entertaining. I would of course love to win the lav mic as I have a special needs son that would love to get in to producing some content online and streaming, but besides that I do mean every word I said. As Adam Savage would say: "Failure is Always an Option!" LOL I have that on a T-Shirt and wear it proudly! 😁👍

Jouw video’s zijn altijd leuk! Zet hem op!! ❤

I start streaming thingsd related to my teaching, so the mic is very helpful!

Love watching your videos. I’m to a engineer and what to start to records videos for this reason it’s nice to win the microphone.

Awesome video! What would be really cool is if you made the ports on the stand interchangeable like the framework laptop

I'd love to start my own KZread channel and starting it with good audio would be fantastic! Just discovered your channel and I'm looking forward to see what other cool stuff you have made

Now add two more to the top one *) Left and Right. It will not interfere with the speakers.

Love the monitor stand, over-engineered as heck😃

You make me feel proud of the the Dutch English accent! Great channel evolution man, keep it up!

A man after my own heart when it comes to audio, and that microphone looks like it'd be really usefell when needing to record your voice hands free!

Verry cool. Good luck to all.

Love the leds and white plastic look. Could use the mics to greatly up my audio game. The Samson go mic doesn't seem to cut it 😆

Now to just figure out how to print that on my ender 3 lol. The lav mic would be an awesome replacement for my old mic that crapped out and I haven't gotten a new one...

Awesome as ever. I have no need for a mic, give it to a deserving individual that can use it. Thanks as always for sharing! 😎

Sweet set up. Dual monitors become pretty indispensable when you start using them. The mic seems cool, maybe if I had one I could use it for live streaming and finally retire the PS3 Rockband mic and scissor arm stand combo that I have attached to my bed frame.

Hello, Great work with the design and the editing of the video. I really like the stand. The only thing I would have done differently is putting the all the input and output ports (except the sdcard reader) to the side, so the cables are out od the way and out of the sight. And I would like to get the earpuds because sound always matters! Keep up the great work!

Looks awesome man, i think you should have incorporated some speakers into it though.

It's going hard Jon. Kijk altijd naar je vids uit.

Hello first, I think your channel here on youtube is the most innovative and best there is, I'm looking forward to more exciting projects

I’d love that wireless mic cause I need to step up my audio game for my project videos

I just started in filmschool and the LARK would be quite nice to have in my personal toolbox so I don't have to fight the other students over the schools equipment 😁

Great video. Nice design. It never fails to surprise me how products are so badly designed. Mahalo for sharing! : )

This was a cool project 😮

Making monitor stands for the audio monitors, at ear height, properly isolated from resonances, would also free up space on the desktop. Possibly to add a tablet or similar connected to octoprint for monitoring the printing room.

The stand looks great an added functionality is just what I would like in future monitor stands, a little bit to flashy with RGB for my taste but that transparent case reminded me of those NES consoles, like in Seth Everman collection :D Another idea for your video are currently boring and partially useless notebook accessory that are cooling stands, at most they have USB 2.0 HUB integrated, merge it with those Thunderbolt dongle accessory with 2.5Gb Ethernet, SD card reader, additional 3.1 USB and display ports, you could even add M.2 connector for fast SSD inside. Anyway Hollyland mics, I could use them to make that cooling stand with my Ender 3, it may be a cool challenge for me to make one. Pretty please :)

Awesome project. Your videos are always very entertaining. Keep on going. (No need for a microphone, so not trying to get one, but always nice seeing a giveaway)

I would want this microphone because i’m studying sound and music production in Germany and would find use for it all the time during and after my studies ;) Btw love your content