This is a 3d printed ice cream machine...

Ойын-сауық

This is a 3d printed ice cream machine. While it may look simple there were actually many engineering challenges that needed to be conquered in order to make it work.
STL Files available on 3D Printer Academy website:
www.3dprinteracademy.com
Learn to design your own things using Fusion 360:
50% off my Fusion 360 course: mmf.io/fusion3603dpaftxex
Support 3D Printer Academy on Patreon and get access to premium pad STLs: www.patreon.com/3dprinteracademy
Join this channel to get access to perks:
/ @3dprinteracademy
#3dprinting #3dprint #icecreammachine #icecream #homemade #diy #satisfying

Пікірлер: 171

  • @bytowneboy
    @bytowneboy Жыл бұрын

    Fascinating approach. I wonder how much air you were able to incorporate into the ice cream? My understanding about the paddle approach is that it both minimizes water crystal size, refining the texture, and also incorporates air, lightening the texture.

  • @taylordavis1543

    @taylordavis1543

    Жыл бұрын

    Airy ice cream is gross

  • @monad_tcp

    @monad_tcp

    Жыл бұрын

    @@taylordavis1543 only because it looks like forbidden barber cream

  • @Wingnut353

    @Wingnut353

    Жыл бұрын

    I have a double paddle hand churn... it makes ice cream on par with commercial ice cream not too airy either... if you churn it about untill you are ready to give up and let it sit for about another hour chilling... you get nice firm creamy icecream with no crystals and perfect for floats etc... the key to good results from my commercial churn at least is using heavy whipping cream + small amount of milk + premixing the sugar in a separate container then pouring it in if you mix the sugar in while in the churn it doesn't mix well in the tall churn leading to bad results.

  • @stirlingr.buchanan6570
    @stirlingr.buchanan6570 Жыл бұрын

    You'll have an easier time finding ice cream recipes if you search for 'frozen custard' instead - the proper food-snob term for the type of 'ice cream' with which home cooks are most familiar. Alton Brown's Food Network content is usually a safe, sane starting point for recipes. I can speak to the efficacy of external agitation with no internal stirrer from personal experience, at least for small batches. If you ever want an idea for a version 3.0 I'd recommend a way to add a salt and ice jacket for onboard cooling to avoid using up freezer space and to let it run in the open where people can watch the gizmo go.

  • @nolansprojects2840

    @nolansprojects2840

    Жыл бұрын

    Good info, thanks!

  • @claws61821

    @claws61821

    Жыл бұрын

    Having grown up alongside a classmate for most of K-12 who was from a family that owned a frozen custard shop, no. No they are not the same thing and saying they are is very insulting to the passionate people who build their lives around making and selling each. They are similar dishes to a respectable extent, but there are several fundamental differences between them - which I couldn't do justice in explaining even if I did remember them after more than a decade and a half away from that Worthy.

  • @pycheung
    @pycheung9 ай бұрын

    Thank you for the brilliant idea! I tried it! Turning the container inside a freezer does make good ice cream. The design in the video will not fit my freezer so I designed and made one that fits. I also don't have a mason jar so I reused a plastic ice cream container instead.

  • @AstonishingStudios
    @AstonishingStudios Жыл бұрын

    I really like this upload, man. Hyped for more print-in-place projects!

  • @Vexelius
    @Vexelius Жыл бұрын

    This is a wonderful idea! And I really like the way you shared your design process, along with the reasoning behind the parts.

  • @CubicsLetsPlays
    @CubicsLetsPlays Жыл бұрын

    Thank you for explaining your design thought process! very well done

  • @Antrim3d
    @Antrim3d Жыл бұрын

    Nice job! Keep up the great work. Love to see maker innovation.👍🏻

  • @mnesvat
    @mnesvat Жыл бұрын

    loved the design and the explanation video great job :)

  • @yourlocaltoad5102
    @yourlocaltoad5102 Жыл бұрын

    Amazing design, I‘m definitely gonna build that one and experiment with some weird flavours. Just a side note: if you want to make designs that are easily usable for people around the world, using ikea products is usually a good choice. Their sizes are standardised and they are available nearly everywhere on the planet, so there’s little worry about wether people can find the parts to build the model. In comparison, mason jars are super rare in most countries and so they can be quite expensive (the first one I found on Amazon that didn’t have a grip on the side, a hole for a straw or any other design element specific for making it a „quirky“ drinking glass and didn’t require me to buy in bulk was 11€ plus 6€ shipping)

  • @DelisonJunio

    @DelisonJunio

    Жыл бұрын

    Ikea might be big in Europe but not in most of Latin America I'm afraid

  • @monad_tcp

    @monad_tcp

    Жыл бұрын

    I don't know about Mason jars. But maionaise pots seems to be that exactly size here.

  • @yourlocaltoad5102

    @yourlocaltoad5102

    Жыл бұрын

    @@DelisonJunio that’s a good point. Maybe there is some other type of glassware that’s internationally available and somewhat standardised?

  • @yourlocaltoad5102

    @yourlocaltoad5102

    Жыл бұрын

    @@monad_tcp We don’t even have mayonnaise pots where I live. Only tubes or very tiny glasses that vary in size and shape depending on manufacturer. Kinda weird that we live in a globalised world and still don’t have a type of glassware that’s standardised in size and internationally available.

  • @turboprint3d
    @turboprint3d Жыл бұрын

    You got some great stuff right on , love to see great designs .

  • @GetUnrealistic
    @GetUnrealistic Жыл бұрын

    Literally the coolest video I watched all day. Knowing how much I love ice cream, I am tempted to learning this and printing my own somewhere.

  • @youtubeburner6218
    @youtubeburner6218 Жыл бұрын

    Now this is why I'm subscribed! Perfect everything

  • @TheB3
    @TheB3 Жыл бұрын

    Aw man, now I’m hungry… 🍦 Fantastic designs!

  • @Geeksmithing
    @Geeksmithing Жыл бұрын

    The ad tangent you went on at the 35 second mark was something!

  • @This_Just_N
    @This_Just_N Жыл бұрын

    My suggestion would make it able to hook up with a standard cordless drill that most house holds would have

  • @jamesblackwood667
    @jamesblackwood667 Жыл бұрын

    You could also use this to make butter at home btw.

  • @taylordavis1543
    @taylordavis1543 Жыл бұрын

    Amazing design dude!

  • @SilentDrifterGT
    @SilentDrifterGT Жыл бұрын

    My wiring and motor showed up yesterday and got it working. Did fill it up with water to test it like the other person tried, and so far everything seems to work fine. So now just need to run to the store and get some of that heavy whipping cream, and try out your recipe.

  • @davidpetry7853
    @davidpetry7853 Жыл бұрын

    just finished a similar design with parts I had lying around Thanks for the great idea, I hope it works out

  • @__-fm5qv
    @__-fm5qv Жыл бұрын

    I wonder if it could work rotating on the other axis? Because that would then be more compact and easier to store in a freezer, freezers where I am are much much smaller than the US ones, and a device like that wouldn't even fit in an empty draw of most freezers, they don't have the height.

  • @ChrisB...

    @ChrisB...

    Жыл бұрын

    AKA a rock tumbler. I think the splashing of the cream is key.

  • @ianr2002

    @ianr2002

    Жыл бұрын

    I think it could work, but you'd need to put some sort of paddle inside the jar to actually stir the liquid around, otherwise it'd just stay at the relative "bottom" of the jar for the most part

  • @gerrydlr8659

    @gerrydlr8659

    Жыл бұрын

    I had this same thought, I wondered why he didn't even mention it

  • @gerrydlr8659

    @gerrydlr8659

    Жыл бұрын

    @@ianr2002 this is some good reasoning right here

  • @valian8985

    @valian8985

    Жыл бұрын

    Its should work as long as you add some padle good idea !

  • @mitchellquinn
    @mitchellquinn Жыл бұрын

    Fusion 360 .... never again. However, your designs are pretty damn good; nice work!

  • @darrennew8211

    @darrennew8211

    Жыл бұрын

    Blender could probably do all this without crashing or even requiring you to map out ever mm in advance. :-)

  • @brianmoody2949

    @brianmoody2949

    Жыл бұрын

    @@darrennew8211 Blender isn't CAD software and is not designed for creating real world parts at a precise scale

  • @darrennew8211

    @darrennew8211

    Жыл бұрын

    @@brianmoody2949 It's not CAD in that it won't do any sort of analysis, but it's perfectly capable of doing precise modeling. Check out Maker Tales on youtube for a whole playlist instructing how. It's really not that difficult, especially after you install a plug in or two designed for that, like CAD Transforms or CAD Sketcher.

  • @claws61821

    @claws61821

    Жыл бұрын

    @@brianmoody2949 Alternatively, if you prefer something with native unitary precision and without the risks of internet unavailability or licensor corruptibility, you can always use OpenSCAD or FreeCAD depending upon your stylistic methodology preference.

  • @Geniusinventor
    @Geniusinventor Жыл бұрын

    Oh Wow man this Machine is very good 😃 you are soo good at Thinking about other people's problems and making the product Flawless. Thank you amazing video btw

  • @Joshkashley1
    @Joshkashley1 Жыл бұрын

    This is winning at 3d printing. 👍👍 Love this sorta stuff. How long did it take in the freezer?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    Thanks! About six hours

  • @zumuvtuber
    @zumuvtuber Жыл бұрын

    Cool project! I guess I want to make some ice cream now too 😁

  • @natec1
    @natec1 Жыл бұрын

    The fact that you can hear 3d printers in the background of the vo is great lol

  • @arinasan247
    @arinasan247 Жыл бұрын

    6:25 is sooo cool

  • @zachsylvester309
    @zachsylvester309 Жыл бұрын

    It would be interesting to see if you could accomplish the mixing action by vibrating the jar.

  • @MiguelRodriguez2010
    @MiguelRodriguez2010 Жыл бұрын

    Ah yes ice cream and 3d printing ❤️

  • @timothyhackett7372
    @timothyhackett7372 Жыл бұрын

    you should make a version that spins along the axis of the jar so its more space friendly in a freezer

  • @dtesta

    @dtesta

    Жыл бұрын

    That's exactly what I though. Why spin the bottle that way? Just makes it way more complicated and takes more space!

  • @elrickking9293
    @elrickking92938 ай бұрын

    it gives me the idea to adapt a food processor for this

  • @seasong7655
    @seasong7655 Жыл бұрын

    Very cool machine. Do you know how much energy it needed for one jar?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    I think its a 0.5W motor and needs to run for about 6 hours to freeze the cream. So, maybe 0.003 kWh. (Seems very small)

  • @jamesonbrull2404
    @jamesonbrull2404 Жыл бұрын

    I am new to electronics and stuff, how did you power the usb while it was in the freezer?

  • @nokkitisaro1533
    @nokkitisaro1533 Жыл бұрын

    I love desing, Can you make a bubble tea machine?

  • @manp1039
    @manp1039 Жыл бұрын

    Nice design. I am wondering if it would work if the jar was on it side while spinning it.. I am thinking if it was on its side it would also conserve more space in freezer.

  • @TheAMadMan
    @TheAMadMan Жыл бұрын

    This would be fun to fill with different colored liquids that repel eachother. Then take it up a notch by buying uv color additives and get that in slow motion under a black light

  • @scotty562
    @scotty562 Жыл бұрын

    It would be great to be able to use this outside somehow.

  • @DesignPrototypeTest
    @DesignPrototypeTest Жыл бұрын

    Wow! Nice project. Fun video. Now make an unnecessarily complicated version that rotates the jar and spins it at the same time.

  • @MikeSims70
    @MikeSims70 Жыл бұрын

    Curious as to how long it took for the recipe to freeze one you started it spinning and di you use a battery to drive the motor in the freezer or did you let a cord hang out of the freezer while it ran?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    about 6 hours. cord hanging out

  • @MikeSims70

    @MikeSims70

    Жыл бұрын

    @@3DPrinterAcademy The nice thing about running a motor inside a freezer, is that the motor will be much more efficient at freezing temps and condensation won't really be an issue. Also, the reason why you would never get any rings as the mixture cools, is because the mixture will be fully mixed before freezing even starts.

  • @rotorblade9508
    @rotorblade9508 Жыл бұрын

    I would need a battery for this so I’m thinking of a li-ion cell and a protection circuit. there are many protection boards available just type li-ion protection board or stg, Li-ion can’t be charged at freezing temperatures but they will still have some voltage below 0C anyway it’s better to wrap it in a protective material

  • @electricalychalanged4911

    @electricalychalanged4911

    Жыл бұрын

    LiIon does not do so well under 8°C. I would strongly recommend against putting one in the fridge

  • @boulder795

    @boulder795

    Жыл бұрын

    Bad idea. Batteries and sub zero temperatures don't mix so well

  • @DanSamek

    @DanSamek

    Жыл бұрын

    How about to protect the battery pack inside polystyrene box or similar?maybe even adding small heater inside that box?

  • @planktonfun1
    @planktonfun1 Жыл бұрын

    unlimited icecream!

  • @davidpetry7853
    @davidpetry7853 Жыл бұрын

    How did you power it in the freezer? Just a cable to the inside or with batteries? also maybe add some ball bearings to reduce friction and wear

  • @SpinStar1956
    @SpinStar1956 Жыл бұрын

    Several Points: First do have a GoPro or some camera that you could do an actual video of the process in the freezer? Next, I really think the food-safe plastic hysteria is a bit much. I have never used PLA but do use PET and PETG which is what the food industry uses. I think the biggest concern is not what you'd get off of the plastics (what is going to survive the +200C extruder temperature?) but sealing the layers to make sure that you don't harbor bacteria--but I think with heat-sealing you could mitigate that issue. Lastly, I'm thrilled to see the 'tumbling-jar' method actually make ice-cream because trying to get a proper auger with enough power to work is a real challenge. Great video and love all your commentors..

  • @kencotton4645
    @kencotton4645 Жыл бұрын

    Does it need to be glassware? Could you do the same thing with a plastic mayonnaise jar? Would love to see how a plastic jar would hold up for this use.

  • @Godkey1
    @Godkey1 Жыл бұрын

    You probably could also use it to make butter with a slightly faster motor.

  • @RustyCarnahan
    @RustyCarnahan Жыл бұрын

    You can use the same gadget at room temperature to make real butter, too.

  • @Lukarbonite
    @Lukarbonite Жыл бұрын

    What kind of power supply did you use?

  • @firekid3057
    @firekid3057 Жыл бұрын

    How did you get so good at Designing 3d models?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    by designing lots of things, practice practice practice

  • @firekid3057

    @firekid3057

    Жыл бұрын

    Thank you for taking time to respond to my Question.

  • @Bundalaba
    @Bundalaba Жыл бұрын

    You could have shown how you placed the device in in the freezer and progress vids, 8:30 that cut straight look to product looked like a Tik Tok craft scam . Don't don't get me wrong, LOVE your work (liked and subbed) just friendly pointers.

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    Thanks! 5:25 shows the first version in the freezer

  • @SuggieBear
    @SuggieBear Жыл бұрын

    That should be able to churn butter too.

  • @AdamWebb1982
    @AdamWebb1982 Жыл бұрын

    I kinda want to make something like this to mix other fluids like paint or for me car polish that’s started to separate

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    this is probably a good mixing device in general!

  • @theayuwoki3569
    @theayuwoki3569 Жыл бұрын

    It really mixes? By the time the ice cream froze it won't mix anything by just spinning instead of something mixing manually the ice cream like your first version.

  • @ge2719

    @ge2719

    Жыл бұрын

    Err, but then its frozen, so you dont need to mix it once again ts frozen.. Lomg before the entire thing has froze it will haveformed tiny crystalds inside the fluid as it moves around rather than large crystals. The entire thing will become too frozen to move in nce its full of tiny crystals . Which is exactly what you want.

  • @TecSanento
    @TecSanento Жыл бұрын

    The only downside being that you need a lot of space in your freezer. We have a slider/cupboard stile freezer so it will never fit. But it inspired me anyway - I will find a way to make it work

  • @SilentDrifterGT
    @SilentDrifterGT Жыл бұрын

    What are the dimensions of it? Just want to make sure it fits on my 3D printer

  • @RadMan42069
    @RadMan42069 Жыл бұрын

    What infill did you use?

  • @2EOGIY
    @2EOGIY Жыл бұрын

    great design. How would look like a mechanism that will put that on the next level by extra shake while rotation like two steps forward and one step back? Some planetary gears?

  • @claws61821

    @claws61821

    Жыл бұрын

    Epicyclic gears would only change the gearing ratio, in your context. What you want needs either specially shaped gears or a reversing mechanism that uses timing gears. @King Mechanical frequently posts videos rendering examples of these and other mechanisms and their operational motions. Of course, if you *really* want to mix something up externally, three rotational axes and at least two vibrational axes is absolutely the way to go! XD but then you're getting something the size of a paint or cement shaker, probably.

  • @2EOGIY

    @2EOGIY

    Жыл бұрын

    @@claws61821 That would be awesome to find out if ice cream of cement is still soft enough to use a spoon on it :D

  • @claws61821

    @claws61821

    Жыл бұрын

    @@2EOGIY lol the sad thing is that this isn't the first time I've heard or seen that joke

  • @bonezonechannel
    @bonezonechannel Жыл бұрын

    whats the song at the end?

  • @klintkrossa6885
    @klintkrossa6885 Жыл бұрын

    What about a butter machine next? lol

  • @montagistreel
    @montagistreel Жыл бұрын

    This is a 3d printed rock tumbler.

  • @AndrewAHayes
    @AndrewAHayes Жыл бұрын

    How did you power the motor whilst in the freezer and what method did you use to avoid shorts from the wet cold air?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    A cable goes out through the rubber seal (the cable is thin so it doesn't compromise the seal too much). Wires have heat shrink, but it's not perfect insulated. I didn't have any issues with shorting. But maybe sealing the wires with hot glue could work.

  • @ge2719

    @ge2719

    Жыл бұрын

    Maybe a polystyrene container to cover all the electronics would be a cheap and easy way to protect them for the 6 hours it takes to freeze the ice cream.

  • @TheKingMJackson
    @TheKingMJackson Жыл бұрын

    How did the motor last in the freezer, did the freezing temp cause any issues to the motor? Im assuming the device and motor was inside, and the motor wires were directed out of the freezer, to a plug socket or power source

  • @rotorblade9508

    @rotorblade9508

    Жыл бұрын

    the motor shouldn’t have any problems except a little bit of corrosion but it should still last a lot

  • @AleMagalhaes

    @AleMagalhaes

    Жыл бұрын

    Apart from friction, the motor is the only part of this machine that will heat by itself, so probably will never be below zero.

  • @dannyh1
    @dannyh1 Жыл бұрын

    Could you also put the V1 up for sale?

  • @30elias28
    @30elias28 Жыл бұрын

    cool. and ill probably try it. BUT what is that noise?!

  • @NaClGod
    @NaClGod Жыл бұрын

    Now we just need to make it gravity powered!

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    🤯

  • @seasong7655

    @seasong7655

    Жыл бұрын

    I was thinking about making it spring powered like in a wind up clock mechanism.

  • @NaClGod

    @NaClGod

    Жыл бұрын

    @@seasong7655 I wonder how the spring would react in the freezer

  • @yourlocaltoad5102

    @yourlocaltoad5102

    Жыл бұрын

    @@NaClGod unless there’s condensation on the spring, it should work just fine, tough it might be smart to freeze it before winding so thermal contraction won’t be a issue. With springs heat is more of an issue than cold.

  • @brianadams7903
    @brianadams7903 Жыл бұрын

    Cool machine! 😎 be cool to be able to check out your profiles.

  • @clarkhazle9629
    @clarkhazle9629 Жыл бұрын

    I can see this to make butter

  • @FuriousImp
    @FuriousImp Жыл бұрын

    Love the presentation and thought process!

  • @alpha_pixel_
    @alpha_pixel_ Жыл бұрын

    It can mix other foods too.

  • @primecouncil6475
    @primecouncil6475 Жыл бұрын

    dude...just add grooves for bb balls to roll in your joints,make it a bearing so it wont wear down all that fast,add probably second axle of rotation to make it really mix it all up.. there's so much cheap upgrades and yet ...

  • @ge2719

    @ge2719

    Жыл бұрын

    You dont need another axis of rotation. You're not making a slush casting machine. You just need to keep the fluid moving while ice crystals form.

  • @bob-ny6kn
    @bob-ny6kn Жыл бұрын

    No. That is a butter churn. Ice cream requires ... ice... that is made colder than ice.

  • @fatsticksurfsup4450
    @fatsticksurfsup445023 күн бұрын

    can you design a slushy machine

  • @GHILLIESARCADEANDMORE
    @GHILLIESARCADEANDMORE Жыл бұрын

    Cool

  • @justinweatherford8129
    @justinweatherford8129 Жыл бұрын

    I think that you forgot the vanilla.

  • @Handles_AreStupid
    @Handles_AreStupid Жыл бұрын

    Couldn't you make it with a roller system? You would lay the jar onto two rollers, one would be powered by a motor and the other would be passively driven by the jar. If you did this, you could make a few differently positioned holes for the rollers to fit any jar size. Just a thought.

  • @danielch6662
    @danielch6662 Жыл бұрын

    Can this make slushies?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    probably!

  • @chuckchucky5749
    @chuckchucky5749 Жыл бұрын

    What battery did you use

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    This is using a 5v power adapter and is connected to wall outlet. The power cable goes through the freezers seal.

  • @zethyr8833
    @zethyr8833 Жыл бұрын

    Who do I have to talk to to get a functional typewriter 3D printed

  • @Cool_cars_666
    @Cool_cars_666 Жыл бұрын

    Bro I love your videos

  • @darrennew8211
    @darrennew8211 Жыл бұрын

    Stirring device: Chopsticks. They're all pretty much the same size.

  • @diesockedeslebens6599
    @diesockedeslebens6599 Жыл бұрын

    1:15 the marble Machine is a realy cute Idea,but i personally have a grudge against large Prints wich incorperate 3d printed springs...dont ask

  • @asdf154
    @asdf154 Жыл бұрын

    I don't care about learning how to design it, give me the recipe! Haha XD

  • @yeungvincent3977
    @yeungvincent3977 Жыл бұрын

    is it really work ??????? only seeing the ice cream pop up out of nowhere

  • @peteralcivar6731
    @peteralcivar6731 Жыл бұрын

    I just put the finishing touches on this and installed the 60rpm N20 motor. It turns when empty, but when I tested it with a mason jar half full of water, the motor was still turning but the gears in the motor started slipping (NOT the 3D printed gears). Is this normal?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    I haven't had any issues with the N20 motor gears slipping. It should be able to handle a good amount of torque. Make sure the axle isn't slipping in the 3d printed gear.

  • @peteralcivar6731

    @peteralcivar6731

    Жыл бұрын

    @@3DPrinterAcademy Yep. I checked again and that's exactly what's happening. The axle is slipping in the drive gear. I'll tweak it and print it again. Thanks.

  • @peteralcivar6731

    @peteralcivar6731

    Жыл бұрын

    @@3DPrinterAcademy Got it! I reprinted the drive gear with a 5% smaller shaft hole and it works like a champ!

  • @vladsh9292
    @vladsh9292 Жыл бұрын

    Сделать восковку по резьбе и отлить из бронзы, точнее и проще

  • @robertsteel3563
    @robertsteel3563 Жыл бұрын

    4:09 Can I get detailed instructions, please?

  • @3DPrinterAcademy

    @3DPrinterAcademy

    Жыл бұрын

    Here is what I did: 4 parts heavy whipping cream : 1 part sugar syrup (adjust depending on how sweet you want) Add any flavorings (chocolate chips, vanilla, mint etc.) Combine and Tumble for 4-6 hours in freezer Take out of freezer and manually stir (scrape sides) Place back in freezer for an additional 4 hours Enjoy!

  • @smoothbraindetainer
    @smoothbraindetainer Жыл бұрын

    Other way around at 5:10. They contract.

  • @user-ij9kh7jf8o
    @user-ij9kh7jf8o Жыл бұрын

    make dumplings

  • @till2911
    @till2911 Жыл бұрын

    you could ubgrade this so it use ice and salt instead a freezer so you could make ice cream on the go

  • @dtesta
    @dtesta Жыл бұрын

    Wouldn't it work by just spinning the bottle laying down? Thus making a super simple design?

  • @nasimhussainchowdhury2466
    @nasimhussainchowdhury2466 Жыл бұрын

    I want to discuss about this ice cream machine . I wanted it with more complex mechanism . Like it should be spinning like globe . I think, i unable to explain my statement here . Sorry !

  • @mixtermuxter8602
    @mixtermuxter8602 Жыл бұрын

    It didn't fit in the freezer I BET

  • @tobiastho9639
    @tobiastho9639 Жыл бұрын

    Idea: The clip could be wedge shaped to accommodate more different sizes. Also it's easier to put on.

  • @SuperEvilworm
    @SuperEvilworm Жыл бұрын

    Size? I found the STL on your webpage, but it would be nice to leave it in the description. And I honestly thought it was a free model.

  • @everythingiscrazy304
    @everythingiscrazy304 Жыл бұрын

    This video was really good 1 good idea 2 good filming 3 good music

  • @TheStuartstardust
    @TheStuartstardust Жыл бұрын

    What about a rock tumbler machine like device - 2 rollers. Any round'ish shape should work then 🤓

  • @OddJobEntertainment

    @OddJobEntertainment

    Жыл бұрын

    Had the same idea, already drawing up a sketch to then turn into a Solidworks project.

  • @TheStuartstardust

    @TheStuartstardust

    Жыл бұрын

    @@OddJobEntertainment perhaps tilt rollers to keep cream in bottom end of jar and to keep jar on rollers. Then rollers need only a flange in one end. Maybe - or not..🤓🤔

  • @OddJobEntertainment

    @OddJobEntertainment

    Жыл бұрын

    @@TheStuartstardust I think it would save more space if the jar is totally flat. I'm thinking just add a stopper on either end of the jar to keep it from moving up and down (relative to the jar).

  • @claws61821

    @claws61821

    Жыл бұрын

    You actually want at least a rocking motion between the top and bottom of the jar to prevent settling. Even with the jar flat along the cylindrical facing, your mixture will get an undesirable gradient of concentrations. That's part of why you generally always see a tilt mechanism on any sort of rotary mixer in several different industries. It helps with dispensing, but the primary purpose is to provide more even mixing. That's also why really expensive mixers and rotocasters implement three or sometimes more rotary axes despite diminishing returns as well as two or more vibratory axes.

  • @TheStuartstardust

    @TheStuartstardust

    Жыл бұрын

    @@claws61821 uneven rollers with offset centers - boom - solved! 🎤⬇️

  • @tcurdt
    @tcurdt Жыл бұрын

    The design itself isn't particular exciting. And along the jar axis would have been much simpler. The actual interesting part is how to get power inside the freezer. Too bad that part was not covered in the video.

  • @needamuffin
    @needamuffin Жыл бұрын

    There's nothing wrong with volumetric measurements in baking. Liquids are incompressible so there's no possibility of a difference there, and for the most part granulated solids are as well. The two exceptions are brown sugar which is usually specified in recipes as "packed" which accounts for a possible issue and flour which, admittedly, compaction isn't usually accounted for. You're *supposed* to sift flour before using it to keep it airy (and properly work in additives like leveners) but I'm honestly too lazy for that so I usually don't, but I am aware of the differences compaction can make so I know what not to do. For the newbie baker, though, I could see the argument of weighing *just* flour. Everything else is much faster and easier volumetically.

  • @claws61821

    @claws61821

    Жыл бұрын

    There's actually a lot of debate at every level of both hobby and profession about whether flour should be sifted or scooped whole or scooped incrementally and about the effects of each. Probably as much argument there as over volumetric measurement vs weight and percentage for ingredients.

  • @harrygregory6227
    @harrygregory6227 Жыл бұрын

    and the motor is too slow

  • @electricalychalanged4911
    @electricalychalanged4911 Жыл бұрын

    Well, it is not an ice machine but a turn a jar in the fridge machine. But that is very well done. I have more stuff in the freezer and would be a litte concerned about all the plastic sitting next to the other food stuff's. Keep it comming good job.

  • @darrennew8211

    @darrennew8211

    Жыл бұрын

    The plastic isn't dangerous. It's the food getting stuck in the layer lines and then rotting and then getting stirred back into the ice cream that's a problem. Remember it's exactly the same plastic that soda and bottled water is packaged in.

  • @ermwhatthedeuce990
    @ermwhatthedeuce990 Жыл бұрын

    no its not

  • @sierraecho884
    @sierraecho884 Жыл бұрын

    Pro tip, instead of the Jan use an insulated container which already has been in the freezer and therefore will freeze the liquid in it. Now you can rotate this new container and the content will freeze without the need to put this whole contraption into the freezer. However as a mechanical design engineer I must say, your machine is very well done and pleasing to look at, great job.

Келесі