This Innovative New Sander Will Change the Way You Woodwork!
Тәжірибелік нұсқаулар және стиль
It's not often we see innovation and the introduction of a new tool line from a company like 3M. This new 3M Xtract sander is a direct competitor to the Mirka and Festool line of sanders. Amazon and other affiliate links are used in this description that help supports this channel.
Videos To Watch Next
Festool ETS125 Sander Review - • Watch This Before Buyi...
PLANS and MERCH: www.731woodworks.com/store
Greatest Free Gift: story4.us/731Woodworks
Tools in this Video
3M Xtract 5-inch Sander - lddy.no/1cool
3M Xtract 6-inch Sander - lddy.no/1coom
3M Xtract Sandpaper - lddy.no/1cook (25% off through September 2022).
Other Tools Seen in This Video -
Festool ETS125 Sander - amzn.to/3cHJJiB
Festool Rotex Sander - amzn.to/3q8nx4e
Festool Dust Extractor - amzn.to/3RyTj68
DeWALT Sander - amzn.to/3ROYQG7
Sand Paper Storage Box I Use - amzn.to/3TU7IvO
Shirt I'm Wearing - www.kerusso.com/products/keru...
Follow me on Amazon for more tool reviews: www.amazon.com/shop/influencer-4e5e1fdd
Support me on Patreon to get access to exclusive behind-the-scenes content, member-only live streams, member-only discounts, and other cool perks: / 731woodworks
I get my stickers from Sticker Mule: www.stickermule.com/unlock?re...
#tools #woodworking #3m
0:00 3M Xtract Sander Review
1:23 3M Sander First Impressions
1:45 3M Sander vs Festool Sander
2:56 3M Sander Specs and Features
4:15 3M Sander Usability
5:20 3M Xtract Sander Dust Collection
6:32 Sanding Faster with the 3M Sander
7:33 3M Xtract Cubitron Sand Paper Review
8:22 Sanding Stroke on 3M vs Festool vs DeWALT
8:46 Unintentional Features of the 3M Sander
9:10 Impressions of the 3M Sander after 2 Weeks
9:41 Cons of the new 3M Sander
11:41 Should You Buy the 3M Sander
12:52 Should You Get a 5-inch or 6-inch Sander
13:40 New Woodworking Tools are Rare
Пікірлер: 680
▼EXPAND FOR LINKS TO THE TOOLS▼ Festool Sander Review ► kzread.info/dash/bejne/m5qKx9WAZpuzh6w.html Tools In This Video: 3M 5-inch Sander - lddy.no/1cool 3M 6-inch Sander - lddy.no/1coom 3M Xtract Sandpaper - lddy.no/1cook (25% off through September 2022). Other Tools Seen in Video - Festool ETS125 Sander - amzn.to/3cHJJiB Festool Rotex Sander - amzn.to/3q8nx4e Festool Dust Extractor - amzn.to/3RyTj68 DeWALT Sander - amzn.to/3ROYQG7 More Awesome Tools Under $30 DFM Square: amzn.to/3Jfb5H2 Thin Rip Jig: amzn.to/3LKm2lB DFM Saw Height Gauge: amzn.to/3jidia1 Small F-Clamps: lddy.no/157u9 (If you use one of these Amazon and other affiliate links, we may receive a small commission) Some other useful links: -Daily Tool Deals on our website: www.731woodworks.com/tool-deals -Subscribe to our email Newsletter: mailchi.mp/7e44c16eefdc/731-woodworks-email-newsletter -Check out our easy-to-follow woodworking plans: www.731woodworks.com/store
@davidgray6852
Жыл бұрын
3m sander is coming from there auto body line. I have a 3m air sander and it's the best I've ever used
@CraigularjJoeWoodworks
Жыл бұрын
Don’t buy Mirka to make a video, that’s an unreasonable request. This video is just fine without one more sander
@ZL1LoVeR
Жыл бұрын
This exciting!! How does the Xtract sander and Xtract paper perform with wet sanding from what you’ve seen so far?
@ZL1LoVeR
Жыл бұрын
@@CraigularjJoeWoodworks agreed it’s unnecessary, keep your hard earned $600 and spend it on something else of more value to you
@captainflannel8558
Жыл бұрын
not really new plenty other sanders just like this 3m i use the porter cable 6in da in have for like 2 decades now as a autobody sander n thats the thing thats new there marketying smooth da autobody type sanders to woodworkers i mean its a 3m the largest auto body supplier there is theres a the porter cable one is bout 150 n even harbor frieght has one for 50 to 70 not new just newly pushed to wood worker hell been using mine for woodworking for years as have sevral others
Had my Mirja set up for almost 10 years now hit it when it first came on the scene! Amazing and not missed a beat!
I purchased the 3M sander after watching reviews on youtube, yours included. It died a few months after light use. It also generated quite a bit of static electricity using it with both a festool and then a 3M extractor. Took a month to get a replacement, but it was done under warranty. I was told they “some problems” with the first generation, and the replacement would not have the same issues. Six months later, the replacement sander is dead. It works well when it works, but I would suggest avoiding it.
Thanks for the review. I use a Dewalt and I agree the vibrations that sander puts off is so strong. I wear headphones while sanding because sometimes I need to dance a little, but anyways, it definitely makes my hand numb after prolonged use. I will start saving to get a 3M so that I can have less of a shell shocked hand after sanding. *For color, I spray paint my tools light pink haha.
To me, as a hobbyist who's budget is smaller than all the Woodpecker tool users, that price is out of my range. I avoid so much sanding by using a card scraper and/or a smoothing plane. I avoid vibration issues by holding my DeWalt at the hose and a couple of fingertips on top of the sander. If you don't like that idea, get some anti-vibration gloves. I hook my sander up to my shop vac and that noise is much worse than my sander. On goes the hearing protection. My favorite way to do that is with noise cancelling headphones.
A more apt comparison on the Festool end would be the ETS 125 or 150 EC line, not the ETS 150. The EC models have a quieter, lower profile, and more powerful brushless motor just like the 3M and mirka, and you can choose between 3 and 5 mm orbits. Only main difference is the lack of a paddle switch. Would love to see a comparison with this model and the mirka for a true apples to apples.
@5280Woodworking
Жыл бұрын
100% agree. It is the best Festool sander, hands down IMHO.
@ronswoodshack
Жыл бұрын
Great review! I bought the dewalt that you have and I love it. Thanks Mighty Matt.
@irenovatedmv
Жыл бұрын
Agreed. 100%. Throw in the SurfPrep while you’re at it…and really make it a party!!!
@StoneyMeyerhoeffer
Жыл бұрын
I agree it is more apt. I only have around 100 hours on my 3M, but more than that on the ETS line. I personally give the edge to the 3M. I have cubital tunnel in both arms and I can go almost an hour longer on the 3M than the ETS before the pain is too much. Dust collection on the 3M is better as well. This is anecdotal I realize, but having used both for long enough to know, the 3M is about 11% better. :)
@timk5867
Жыл бұрын
He said that
Best move I ever made was ditching that dewalt sander and upgrading to Festool. Life changing.
I've been searching for a replacement for my Milwaukee cordless sander and came across this from one of my subscribed channels. Thank you. This looks like it might fit my needs.
I've just started watching your videos in the last couple of weeks and am thoroughly enjoying them. You do beautiful work! I'm hoping to get into woodworking in the near future if a new treatment works for me, and find your videos extremely informative. Cheers from TO!
Please do a comparison video with just high end sanders > $300. Gotta do a side by side in action with Mirka and Festool at least. Maybe then do a budget sander review, Sanders < $150. Your tools keep upgrading to a range many viewers can't afford. It should be mentioned the 3M is a commercial/industrial tool, not a typical consumer item. Keep the faith, stay blessed.
Just came here from your latest short…I’ve honestly got to get myself one of these! I have pretty bad arthritis in my hands and wrists, and although I manage, this would be a wonderful change. 🙂
The 3M sander isn't just a lower volume, it's also a lower pitch. It's so nice that I can actually fire it up and still hear Matt's video without any issue. I haven't had a chance to use mine yet, but I may not actually hate (this part of) sanding for a change!
@Psyche721
11 ай бұрын
Does it still work? It has 1.7 starts on google because everyone says the engine blows after 3 months
Can't wait till you do a review of the 3M dust extractor. Looks amazing and I would love to hear your thoughts and if you think it's as good as many seem to
Really helpful in making a decision on which sander to invest in. many thanks
Thanks for the review. I just picked up a 3M sander, great investment. Awesome sander for the money.
This is the second positive review I’ve seen on the 3M sander. (Stumpy nubs was the first) great video! Thank you!
I jumped on the opportunity to get this sander (5mm 6 inch) and I really don’t think I will ever regret it. It’s amazing. I was considering the Mirka but couldn’t bring myself to spend the money yet. I’m glad I waited!
@Psyche721
11 ай бұрын
Does it still work? It has 1.7 starts on google because everyone says the engine blows after 3 months
@G0F15H
10 ай бұрын
My 6" died in the middle of a project. I had been using it for 15 minutes (total time on the tool could not have exceeded 15 hours). It shut off and would not come back on. It's a known issue they've apparently fixed. To their credit, they offered to repair or refund me, but I'm hesitant to give 3M another try. (I ended up buying a Rotex to get my project done anyways). They should have issued a recall for early supporters of the lemon models vs waiting to have them fail mid-project and jump through hoops of customer support.
I have one 6". Awesome sander.
hi matt ive been whathing you for about 6 months know im not very good at the cumpor i just got it at the blind school inlongbeach caliifona at the vet center thats were i started wood working thank you for every thing you do
@731Woodworks
Жыл бұрын
Thank you John!
I have a Dewalt sander like yours there. Outside of the noise, I have no issues with it. To help with the hand fatigue, btw, you can hold it backwards and it balances. I hold it with the cord and dust collection hose facing away from me. This means it balances with the weight of your hand/arm, with the hoses pulling to tilt away and your hand/arm countering that. Much easier on the wrist and palm.
Excellent info Matt! Would have never guessed this from the 3M. Thank you for sharing.
If you are into Festool then you should compare this to the ETS-EC 150 / 5. It's every bit as good as the 3M and doesn't have the annoying paddle switch.
@p1kto
Жыл бұрын
came down here to say the same thing. plus you get to stay within the plug-it and clean-tec connectors
@Roct3874
Жыл бұрын
@@p1kto and it's cheaper lol
@marvinwilliams4223
Жыл бұрын
But that only has a 3mm sanding stroke.
@Roct3874
Жыл бұрын
@@marvinwilliams4223 Nope you can buy a 5mm or 3mm sanding stroke of the ETS EC 6" sanders.
@p1kto
Жыл бұрын
@@marvinwilliams4223 available in 3 and 5
Damn-it………now I need one!! Great video.
Great review and great Tshirt!
I just bought a new bosch 18v ros sander and while it’s probably not up to festool mirka or 3m, it’s by far my favorite big box sander I’ve tried. Ergos, (lack of) vibration and dust extraction are great. Paired with the 3m cubitron discs and it’s leaps and bounds better than anything else in that $ range
@mikem4162
Жыл бұрын
The Bosch ros sander with direct drive "turbo" option is a good sander. Comes in 5 or 6 inch. Idk which one you got. But it's Boschs take on the festool rotex but only 300$. It works great.
Im a festool guy. I build with dewalt and keep the green in my garage👍. For tough stuff I have the big boy bosch
Matt, I broke open the wallet and purchased some 3m sand paper from Taylor Toolworks, so I will let you know how it goes. Thanks
I just ordered $25 worth of sandpaper! Never used it before but couldn't pass up the deal! Thanks Mr. Outlaw for the review.
@731Woodworks
Жыл бұрын
Right on
Great video as always Matt and definitely looks like a drool worthy sander. Appreciate that you also touched on how fantastic the 3M sanding discs are. Haven’t tried the Xtract ones but absolutely love the Cubitron II’s as they are on a whole different level from the traditional aluminum oxide discs. They simply sand better and they stay cleaner because of the better airflow and any buildup comes off easily with a couple passes of an abrasive cleaning stick which helps extend their life even further. Those discs can’t address the vibration inherent in lower priced orbitals but they definitely improve the quality of sanding those models are capable of. :)
@jackwatts9030
Жыл бұрын
Yes, I’m sanding decades of trim paint on a house I just bought and the cubitrons blow the doors off everything else I’ve tried.
That Dewalt is still a great sander and a great bargain. Its hard to justify $450+ for a sander. Lol I could get a bench planer or any number of other tools for around that price.
@waydegardner7373
Жыл бұрын
That’s what I was thinking. $450 is way over my budget for an orbital sander as a DIYer. I bought a Dewalt miter saw, a Dewalt finish router the orbital sander and $50 toward a Massca M2 pocket hole jig for about $450. (Matt loves him some pocket hole jigs)
I sand for a living. I refinish wood floors and say I have a lot of Sanders would be a understatement. The newest sander I'm highly impressed with is the Bosch gex 18 volt. It has the same low profile but it's cordless and the batteries last incredibly long time. It's only a 2.5 stroke but it seems to work well and most impressive is it's dust collection seems excellent at 120 bucks I think you'd be impressed
@veritas2022
11 ай бұрын
Is there a corded version of this sander?
@1barticus
11 ай бұрын
@@veritas2022 not by Bosch but there are corded Sanders of that design but they have to be hooked up to dust collection
I would love something like this, especially with the joints in my hands already having issues, but my budget is about 10% of what these go for lol, I didn't even know hand held sanders could get that high.
@1barticus
Жыл бұрын
Try the Bosch gex 18 volt it's the same style but cordless and I have to tell you it's a pleasure to use. The batteries last incredibly long time when I bought mine you got a free battery and charger for 120 bucks couldn't beat that deal
Nice! Thanks for sharing. =)
I got my 3M 5" sander and I was not impressed. I am amazed at how fast I was able to get the surface SMOOTH! I started with the 80 Grit, then 120, and even though the job did not need it I finished with 180. You let 3M know I purchased their 3M 5" orbital sander because of your evaluation! I agree it is an AMAZING sander! Oh, it's half the decibels as my cordless.
I picked up a Mirka 6 inch in a pawn shop for 125.00 brand new could not pass it up no case or book but the mirka rep hooked me up
I like to move my hands around when I sand, and I think the paddle switch would end up being a detractor for me. I am going with the ETS EC125/3 EQ plus. It costs about the same as this, and I can get a six-inch disk too (the EC150 disk fits the EC125) and I will have two sanders. Woo hoo. Thanks for the great content.
Really wish I’d seen this before I bought a new battery-electric pole sander last week. 731 always brings the good info. Thank you guys!
You should check out the surfprep sander it's amazing for wood radius specially with a lot of details
Appreciate the honesty in ur reviews- I can always tell ur genuine and not full of bs lol 👍🇺🇸
@731Woodworks
Жыл бұрын
I appreciate that
I would be interested to know what the longterm support 3M guarantees would be. You could have a Festool RO150 from 15 years ago and the new version of the sanding pads still work on it. That is an often overlooked benefit of Festool, they keep support for their tools for years.
@CrustyCurmudgeon
Жыл бұрын
Not only support from an accessories perspective, but on service too. I've sent Festool service a few of my tools that were waaaay past warranty, and they've never charged me a dime to fix and send back via overnight express (even though I was prepared to be charged). Hard to beat that.
I bought one of these from Tay Tools. Words cannot begin to describe this sander. There is nothing to compare this too. It is uniquely amazing! Fast, smooth, no vibration, and ….. NO DUST ! This is actually fun to use and the end results are wonderful! Big game changer. Try one.
@731Woodworks
Жыл бұрын
Thanks for sharing
@Fictitious_Character
Жыл бұрын
I'd compare it to the Mirka Deros as the 3m is a Deros lookalike.
It’s very similar to the indasa E series I use at the body shop. Sounds identical too. I use it for wood working also.
Great review!
@731Woodworks
Жыл бұрын
Thanks!
You should be trying Rupes. Seriously good gear. I've been a heavy woodworking machinery repairman for years, and now and again I'd be handed a boxful of dead or dying power tools, they're not my specialty but for a good customer I'd do it. I factor in things like spares availability, ease of use, effectiveness, finish, durability, and standard of manufacture. I've even gone to the trouble of looking through the insides with a microscope to check out bearing journals and such. In my experience the best sanders by far, and I mean really far, are the Rupes sanders.
Awesome review Sir! I've been using my Dewalt 20v Orbital and just the switch from the Sandnets to 3M cubitron was night and day. IF I start putting out a high volume of projects I will definitely have to check this out!
3m also sells a soft sanding pad adapter for this orbital sander. Just bought this for my wife as she has been furniture flipping since last summer and I have been taking hints that she is seriously wanting to up her sanding game. We’ll see who uses the sander more 😊
@Noadvantage246
Жыл бұрын
How’s her furniture flipping going?
@devaunramsey923
Жыл бұрын
@@Noadvantage246 really well! I tried that sander too…..WOW!
Wow. I would love to have it but man is it priced at a premium level. I take belt sander to cut down on sanding the switch to orbital but it is a pain. Thank you for the great video 😊
thank you your channel is fantastic
@731Woodworks
Жыл бұрын
Thank you!
Great tool, big price. Thanks doing the comparison that alot of us couldn't afford to do. I haven't seen 3M sanders at any of my local box stores, but I've been a fan for 30yrs. As for the sander, I'll likely be waiting for a project of sufficient size to hide the expense in.
Thanks!👏👍🙏❤️
You had me at the sound test!
Dont forget to get a backing pad saver when using them fancy sanding discs
Throughout the years I’ve invested so much money on different sander, corded and cordless. I’ve tried Rigid, Makita, Bosch, Dewalt, Metabo and others I can’t even recall. My opinion is don’t waste your money. I do a lot of sanding and the 3M sander is effortless. It saves me so much time. It does what it claims to do. If you are a small woman like me, you need to get yourself a 3M sander. The 3M XTRACT sanding disc will also save you money.
You need to check out the Bosch ROS20VSC 5 in.. With the 3M 710w paper I can't imagine a better, smother, lower vibration sander. $60 on sale at Lowes. My wife has used it more than I have and has had no complaints, tingling or numbness. The attached dust collector works great.
Thanks!
@731Woodworks
6 ай бұрын
Awesome, thank you!
I have my sander hooked up to my shop vac and the vac exhaust to my main dust collection line...no dust.
I just got this sander, and it is AWESOME!
Love to see a Mirka comparison. But that’s easy to say when I’m not shelling out the money 😂😂
Iron sharpens iron, baby! Love that shirt.
What 3M mainly did in order to prevent vibrations (not their speech, just exercising my mechanics’ eye) is that they displaced the motor compartment beside the rotary pad, effectively lowering the hight of the machine and, hence, its center of gravity. Therefore, they largely reduced the ultra rapid wobbling due to the drag of a heavy higher component. BUT how 3M reduced the sound to a soothing buzzing is mesmerizing. I wish I could open this sander!
@MarineScoutSniper
Жыл бұрын
Baffles. The baffles are also how they get the maximum dust extraction. I am going to go out on a limb here and say the Mirka patents have sunset. The insulation is more than likely graphene based which helps with the sound. Just call me “Cliff Klavan” from “Cheers” or “Tyrion Lannister” from “Game of Thrones” “That’s what I do……I drink and I know things”
@Jeedehem
Жыл бұрын
@@MarineScoutSniper Hear, hear, Sir; we might have more than mechanics in common 🙌. I had to search for the word « baffles », since English is a second language to me. I’ll probably agree 100% with you with. Did you imply that the baffles in this case act like a car’s silencer? (That the sound waves neutralize themselves by rebound?) I’ve never seen this on a pro-grade tool, but since there’s an actual outlet on a sander, I’d say it is both exceptional and... a given! Thank you for your input.
@MarineScoutSniper
Жыл бұрын
@@Jeedehem yes that is spot on.
Festool ETS125 is awesome 👌
I get SOOOO unreasonably excited when I see a tool that comes with a decent carrying case! LOVE IT! Bonus points if it has a little spare space for extra accessories!
@731Woodworks
Жыл бұрын
Totally agree!
Thanks for the comparisons ! i was looking for the Rotax but the sound is totally insane ... i am now interested in the 3M ! i can see they offer 3/32 or 3/16 stroke , i am starting to work on Epoxy sanding and polishing and my cheap sander is giving me lots of trouble with the swirly/pigtails , which stroke would you suggest for Epoxy with the 3M ? and it works well with wet sanding ?
The dewalt works fine. I love advertising
The 3m cubitron paper is a game changer for sure. It cuts faster, dust collection is far superior than anything on the market. I suggest that you buy a sample pack, you'll never go back. Great review Matt.
Thanks Matt for encouraging me to pull the trigger on this sander (placed order after watching this video). Stumpy Nubs did a review on the same sander & since you co-signed it with your review I felt it was time to get it while it’s on sale! Thanks for this & all you do brother! 👊🏽
@731Woodworks
Жыл бұрын
Brother, you will LOVE this sander! Let me know what you think when you get it!
I'll stick to my $19.99 Bauer. You better be making money with your dust and chios to spend that kind of cash. If your hand/arm are sore after 20 minutes of sanding, you may be putting too much pressure on your sander. I'd also recommend a little money on an adjustable height table. A comfortable and varying height can help a lot with fatigue.
Great video. Def seems like a good sander, but still out of reach for most hobbiest. If the 3M is your new fav, you can always just send one of those Festool sanders over to North Little Rock! 😃
Matt, I’m shopping for a new sander and like most I research until my eyes start to bleed. I was about to pull the trigger on the 3M but I came across the MAXXT 6303. The reviews I have read have been really good. The MAXXT is about $200 less expensive. I would like your feedback if possible or maybe do a review? I really enjoy your channel, it has helped me tremendously. Thank you for time and keep up the great work. 💪🏼
@731Woodworks
7 ай бұрын
I've never heard of the Maxxt brand. I looked it up just now. Honestly if I'm spending $250 for a sander, I'd just get the Festool ETS125
I’ve had festool and big box sanders I’m thinking next I’ll go to merica
I have been using the Air Vantage sanders with external power supply and they are just as good as the old Mirka Ceros. I use the 3/16'' stroke.
I bought this sander when I first dropped on Taytools. It is amazing. I don't have a Festool or Mirka to compare, but it is superior in everyway to my DeWalt and Bosch ROS65VC-6. I used this sander paired with the 3M Cubitron paper on an endgrain cutting board and it is an absolute beast.
How do you get the 3M sandpaper to work with the Festool sanders? They don’t stick to my RO 90, RO150 or ETS EC 150.
Nooice! 😎
Rotex changed my life, my workflow, and my profitability. LISTEN TO THE POWER IN THAT ROTEX! Vroom. The other day i sanded about 1/16th off the bottom of a stair edge to flush up to a tile floor @ a slight angle. The rotex had it done in under 2 minutes with delicate precision. Took longer to setup... I can sand concrete patch if i want. Its faster than grabbing the grinder and the flap wheel if the sander is around. But then i can also use it to finish sand a hot wax repair on hardwood flooring to get the sheen the same with a white scotch brite @ 1500 grit. Truly amazing tool! I think makita might make something similar to the rotex. Would love to see a deep dive on that.
Looks nearly identical to the Mirka. I had to use my old ROS the other day and didn’t realize how nice my Mirka is - I totally recommend it.
3M Cubitron and Xtract sandpaper is all I use now- last forever, doesn’t clump or clog and leaves very nice finish
3M have been manufacturing professional finishing products for the automotive industry for decades. 3M have manufactured sandpaper since 1905, so they know a thing or two about sanding!
i fcking love the 3m sound when u stop it sounds like a brake or smt whatever it is its cool
Let’s see the mirka!!!!
Matt, Bought this sander due to your high praise shortly after after you posted this video last year. Sander was great for a few months. After that, it started glitching and overheating. Now I’m lucky if it will run for 30 minutes before it quits. I’m trying to finish a desk for my son and now need a replacement. I went on 3M’s website where it’s sitting at 1.7 stars due to the same issues. Reviews on Amazon also highlight the same issue with little to no response or support from 3M. This sander is junk and 3M needs to go back to the drawing board. I love your videos for your honesty and integrity. I would ask you to take a look and assess if you would still recommend this sander today and if this video should have a caveat highlighting the reliability of this tool. I wish I had bought the Festool and had the backing of the 3 year warranty. Lesson learned!
@731Woodworks
11 ай бұрын
Thank you for giving me the feedback. Mine hasn't experienced any issues yet. I'm sorry you've had problems with yours. Did you try to get it fixed under warranty?
I recently got mine and couldn’t agree more with you about how great it is. One important benefit for me is that my shop is in a basement only accessible from inside the house and my only dust extraction is a shop vac with dust deputy. So keeping dust to a minimum is critical and this sander just blows all the others out of the water for how little sawdust goes in the air instead of the vac. It may be premium but my lungs are worth it.
Matt, great points made with the 3M Xtract sander and in conjunction with the 3M Xtract Cubitron II Net Disc. This awesome sander combination can bring a novice woodworker to whole new level. Sanding like a PRO!!! Now, if I could figure a way to make a business card out of the Cubitron ll net disc?…. Great job!
@731Woodworks
Жыл бұрын
Thank you Mark!
Hi 👋🏽 thanks for the review. Very helpful. Can you recommend a decent budget dust extractor. I see the sander on the site an it seems to come with connectors. I’m new to this and… I’m going to sand my pecky cypress ceilings 😫 Thank you.
You should try the Festool ETS EC 150/5 EQ-Plus 👍
***Additional Comments*** Check out Bents Woodworking channel and look for, “Festool Sanding Comparison”. This guy is the true Festool aficionado! He owns and uses every sander. The Rotex was meant to be a compromise between a heavy duty sander to remove a LOT of material and a fine sander, but something had to give for one unit to do both so it’s priority is heavy sanding, which is why I bought the EQ 150/5. I have never handled a Mirca, but from what I gather, the Mirca and EQ 150/ 3 or 5 are on par with each other. It just depends on your ergonomics preference. I have heard that 3Ms is basically on pare with the other two and that there’s no reason to drive either one of those to get the 3M sander.
its amazing to see how the sanders that were developed by manufactures that primary lived in the auto body world are different from the wood working world 3M has been a staple for years in the car world I am not surprised that they do a great job here the lack of a plastic box also probably comes from that world as the sanders are typically used in a static location or in a shop and rarely transported to sites.. the removable cord is nice but again in a static shop environment it could just be one more point of failure or a cost optimization that connector has to cost something and add to size so they spent that money on the balance of the tool. if you think you sand a lot in a wood shop I would bet paint and body guys sand as much or more.
This was the video that made me pull the trigger on the 3M. Thanks for showing the comparison with the different levels of sander.
Please compare to the mirka. I have the mirka and I’d love to know the difference in performance and finish.
Have you had to replace the pad. Mine has worn out, is it just as easy as grabbing the pad and unscrewing counter clockwise
Just received the 3m sander 6” bought as a kit with the 3m dust extractor. Was very disappointed to find the hose from the dust extractor doesn’t hook up to the sander it was sold as a kit. I’ve emailed Taylor tools to find out what adapter I need to connect the two. I’ve used it momentarily without the dust collector but it’s head and shoulders better than my wife’s Festool 150, quieter, smoother running and just feels so much better. The Festool sounds like it falling apart, the 3m butter smooth.
@darelldd
4 ай бұрын
How have we made it this far as a society without some reasonable dust-collection standards? Why is melting PVC and duct tape always involved? It truly is a crazy situation, and sure shouldn't be!
I love the review. I am thinking of buying the 3M Xtract. Can I use a regular vacuum cleaner with one? What size OD diameter vacuum hose will fit into the dust inlet on the sander? Thankyou.
They added a counter weight to cancel out the vibration. It's a basic idea that other companies have cheaped out on
I would appreciate your thoughts on the Max xt sander compared to the 3M
$450 for a random orbital sander? Sheesh! I'll stick with my little Bosch for less than $60
You should try the pneumatic version! We use the 3M pneumatic, which is exactly like yours only, air powered of course. The 3M is just an outstanding random orbit sander. I use one pretty much all day and it is incredibly comfortable. I work in a high end furniture shop making chairs, and this sander gets into small areas a big box sander would never fit. Not only can you adjust speed with the button, but the paddle trigger is like a gas peddle, controlling speed as well. I like mine at work so much I bought one for my home shop. He's not kidding, these 3M sanders are your dream sander. He needs to get the pneumatic version, however you need a big 80 gallon or more compressor to run the air versikn as it requires 17scfm at 90psi.
@colelangford6369
Жыл бұрын
Thank you for this informative comment.
@jodilea144
Жыл бұрын
I second @Cole Langford - great comment. I now have another reason to get me one. 🙂 Edit: the part about the paddle trigger working similarly to a gas pedal, that is. Nice!
Festool's durability, dust extraction and after sale care makes it number one 👍
Niceee video. I would like to see the
Wow I wish I knew this before I bought my finish sander mirka.
I would like to see a head to head with Festool and 3m review