This Fixed The Cheap Vintage Honda cr250 Dirt Bike (Part 2)
I end up digging into the clutch cover/ water pump housing on the 1986 Honda cr250 and find the culprit to the problems the dirt bike was having. #Honda, #Cr250, #Vintage,
►SUBSCRIBE: / @2vintage
►MY SECOND CHANNEL: • New Polaris ATV Snow P...
►FORUM: 2vintagerider.com/community/
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
►►► ADD ME ON ALL SOCIAL MEDIA ◄◄◄
► FACEBOOK: / 2vintageyoutube
► INSTAGRAM: 2_vintage_ / 2_vintage_
► SNAPCHAT the2vintage
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
► EMAIL FOR BUSINESS INQUIRIES ONLY: 2vintagetooo@gmail.com
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
Thanks for watching and subscribing!
New videos every week!
The following video features activities performed in controlled environments by knowledgeable persons. DO NOT attempt to duplicate, re-create, or perform the same or similar activities at home, as personal injury or property damage may result. 2vintage( Joe Weber, the persons shown in this video and ANY CONTRIBUTOR, ARE NOT LIABLE FOR ANY such injury or damage. ALL 2vintage( Joe Weber) CONTENT IS FOR ENTERTAINMENT PURPOSES ONLY.
2vintage (Joe Weber) makes no representation about the sufficiency of any safety precautions and equipment used in this video.
Пікірлер: 313
Well will it hold up? These older Hondas all have this same problem. Please SUBSCRIBE and LIKE the video if you enjoyed! It really helps me out a lot! Check out my Instagram: 2_vintage_ Thank you for all the support!
@FreedomInc
3 жыл бұрын
Gorilla glue? Come on. Seriously. Man take it to a shop and have the crack drilled and tig welded. If not it will only continue to crack all the way around the pipe with the vibration.
@2vintage
3 жыл бұрын
@@FreedomInc it was for testing purposes. I'm going to see how it holds up after the first ride.
@JoJo-uv2is
3 жыл бұрын
Oil looks like caramel
@samberkovich4787
3 жыл бұрын
Quick question where did you get your ultrasonic cleaner and what type is it🙈
@FreedomInc
3 жыл бұрын
@@2vintage one ride it may last. Once cracks start in alloys the onky thing that will stop the crack is drilling both ends and welding it. Even if you were to weld the crack,the base crack would continue. It has to be drilled at both ends. This completely stops the linear crack. Then have it tig welded as the repair. The coating will be destroyed from having to sand. It down. But,its fixed right. If tou choose to fix it right take it to someone with a reputation. Since base metals must be properly cleaned pipes can be an issue for the novice with all of the residues on the inside of the pipe. It can be mitigated by someone who knows what they are doing. If nkt the crack will continue around the entire diameter of the pipe depending on how It was originally built.Good luck.
How can you possibly think that superglue belongs on an exhaust pipe lol
Hell Yeah, I love watching 2 stroke videos in the morning.... 2 strokes for life...
@boogiekush9391
3 жыл бұрын
All day everyday 🙌🏾
@Clean_JamProductions
3 жыл бұрын
I don't like having a chainsaw motor running my bike so idk 4 stroke or 3 stroke personally
@dirtbiked8846
3 жыл бұрын
This makes me wanna get a two stroke even tho I’m more of a four stroke guy.
@boogiekush9391
3 жыл бұрын
All personal opinions I think it's whatever you have more fun on , 4 strokes are definitely easier and more fun at sometimes, it's the power band and the sound that I can't get enough of that's why I'm a 2 stroke guy
@2clappedout477
3 жыл бұрын
@@Clean_JamProductions lol
Lovin' the two strokes Joe
I love this channel! I used to rebuild dirt bikes when I was a kid, still do occasionally. Cool stuff!
Buy a roll of gasket material to make your own gaskets i use it all the time
You uploaded as I’m lighting a blunt. Perfect timing, thanks dude
@JC-db4ih
3 жыл бұрын
Enjoy
@lukashenriksson4387
3 жыл бұрын
Same
@RagdollRacingInc
3 жыл бұрын
Drug's are bad mmmmmmkay
@BlueOval-uf6fg
3 жыл бұрын
Bragging about destroying your health. Genius
@LordOfTheDabz
3 жыл бұрын
Wake n bake aswell 2 dis
there is nothing better than waking up and seeing that there is a video from joe waiting for me,a cup of Joe and Joe now thats how I start my morning. 😀
@supertedogpriken
3 жыл бұрын
you know what they both have in common: Both make for a great shit show.
That PSI pipe is badass man, I love my 01 cr250r so much I'm building a second one from the frame up in my one bedroom apartment Love what you do man it really gave me the drive to take on my first project bike
You’ll use a whole can of WD-40 to clean some plastics off, but when it comes to brake cleaner that only gets a couple squirts 😂
@ianmangham4570
3 жыл бұрын
Wd40 puts a protective layer on so dirt doesn't stick,brake fluid puts Fkn holes in clothes
@codenamenoob4973
3 жыл бұрын
@@ianmangham4570 wd40 dries off just as quick as you put it on 😂
@ianmangham4570
3 жыл бұрын
@@codenamenoob4973 😗
@bxnme46
3 жыл бұрын
Oil based wd protects. Brake cleaner removes, common sense shit.
@ChickenParm152
3 жыл бұрын
stingy joe strikes again!
Good job on this project when I started watching your vids it inspired me to start fixing old snowmobiles and other stuff thank you so much
It’s a keeper Joe 👍🏻🔥🤟🏻
I have made many a gaskets out of cereal box cardboard....sometimes you gotta do what you gotta do while you’re waiting for parts!
@supertedogpriken
3 жыл бұрын
Or just buy a roll of gasket material to make your own gaskets from your local hardvere store. But doing things the right way is not this guy`s way of doing things...
these videos are awesome,KEEPITUP2VINTAGE!
Very cool. My first road bike in the UK was an MTX80 then moved up to the MTX125. had a big bore kit on it. Loved it...
Dude I have Been a fan for 3 years I love what you are doing man keep it up joe💪👍
2v back with another banger
Congrats, I remember these, Was my dream bike back when it came out, i still have the Original sales brochure in Mint condition, when those bikes were spotless of course, they looked so awesome, i was not aware of how sketchy the coolant issues were. Great job.. Gotta love the Revs & Sound of the 2 strokes, The 4 strokes these days are not the same, even though they are larger. i had a mid 80's early KDX Non water cooled. 1st set ive seen from your channel, it brings back memories.
So many projects..... love it bro💪💪💪
Automotive antifreeze not made for dirt bikes it causes all that corrosion. Should be running a coolant specifically designed for aluminum such as engine ice that regular coolant over long time will do it every time I would be changing the coolant and all of your stuff
@warrenzevonsangryghost6055
3 жыл бұрын
Yeah, I saw the green stuff and said 'Nope!'. Also, why wasn't the cover cleaned before adding the epoxy? 15 minutes max! Better yet, I know some great aluminum welders that could handle it (unless that cover is magnesium...?)
I have to say the way you tap and dyed the 85 was just great. After seeing this job wow, wish he had ur idea! Lol
Been watching your channel for over a year now joe .its good to watch work getting done on the cr 250 john from Scotland
It would be epic if Joe could find an old Elsinore from the 70's
@2vintage
3 жыл бұрын
I would love to
@riprodfarmer5530
3 жыл бұрын
or like an mt250
@riprodfarmer5530
3 жыл бұрын
what would be even more awesome would be a yz360,that would be awesome!
@lottiecooper609
3 жыл бұрын
Elsinore 175!!!
@jasonpetrich4141
3 жыл бұрын
I would rather see him find a 250 bulltaco!!!! .my dad had one it the 70's. And a kawi green streak. I was so afraid of them when he started them. Sooooooo loud. But I learn to love them. We have had probably about 200 altogether though out the years half of them are honda's and Yami, with few special and a couple kawi's
Looks like that thing is gonna be a beast!!! Good job!!
“Oh that phone in the back ground” lmao great video joeee
the best dirtbike restoring channel
@charlestaylor3434
3 жыл бұрын
Bwaaaaaaaaaaaaa🤣🤣🤣🤣🤣🤣
Love the video I learn so much from you thank you dude
The 250 really looks like it runs great!! I really wish you didn't get any epoxy on the water pump seal though. The seal need to flex in the middle Around the shaft to keep it sealed. That's why most seals have the spring behind them! This bike brings back so many memories!!!!
That’s a sweet bike 👍
I descover you chanel a couole weeks ago. I got my self 2 old dirt bikes a kdx80 83 and a cr80r 84 as new projects. I love your content!
Cant wait till the project is finished keep up the good work
@supertedogpriken
3 жыл бұрын
this guy is NEVER gone finish a project. he is just gone meke it to the point it holds up just enough to do a top speed run, and then selling it to the next poor guy that has to deal with the shit show this guy has done....
When that thing started I was happy 😃
First video I’ve watched of yours, you don’t seem like a idiot with bikes and you like 86 Honda’s like me. Definitely deserve my sub !
Yes and another one bad ass video's congrats great bike love it!!!!!
@supertedogpriken
3 жыл бұрын
yea this was bad, a real ass vide. What a fucking shit show this guy is puting on.....
Nice Cr250 & awesome video man
Just got done doing this to my 86 If you can find a case off a 90-91 cr250 it will bolt right up then you don’t have to deal with Magnesium rot anymore and you also get more oil capacity and a removable clutch cover new cases can still be found on Rocky Mountain or eBay
Hey Joe, By putting the epoxy in the seal it won't flex and is solid now destroyed, the hole you filled is a weep hole. The oil will be clear until the seal burns up and with no weep hole it will push into the cases. Not hating just educating. Pops
@charlestaylor3434
3 жыл бұрын
Absolutely correct sir!
Great video and continue with this bike😀👍
I thought gorilla glue was only good for hair :)
@Stratos53100
3 жыл бұрын
Lol, Yeah those Idiots, Yes i said it... Are Stupid to do that.....End of story...
I like this channel I stumbled across it. I love my old bikes
Love the videos, and I appreciate the fact that even when you don't know how to do repairs, you get them done anyways. Please, please, learn how to check the oil in them the right way though. Shoving a wire down the hole tells you nothing except there is oil residue and what it looks like.
@2vintage
3 жыл бұрын
I put the exact amount of oil it needed i to the bike so it should be perfect. I was checking to see color of the oil not amount.
awesome! good job!
Get yourself some gasket material at a Napa or auto store nice to have around works just as good as factory an it's always great for back up
Nice bike 👍👍
This guy needs more subs
cool bike, I ride a 85 400 maico that we built from the ground up, the thing is scary fast but I love it.
Use that long funnel to drain the coolant into the jug, mite be abit easier for you, another great video buddy, i end up watching to many of your videos n never get anything done all day lol
The taiwan ones actually come really fast! I've ordered one for a -89 CR500, took two weeks to get to Finland. I also ordered one for my -83 YZ125 7 days ago and it arrived yesterday
@2vintage
3 жыл бұрын
Good to know! Thanks!
@joonaazzz_7279
3 жыл бұрын
@@2vintage The pitreplica ones are also good quality for the price and fit well, if u can't find one closer I hiqhly recommend getting one!
I enjoy your vids man I wanted to tel u I got a 2018 kx 250f and I like your vids man
Long live the 2 smoke
I owned a few 2 stroke dirt bikes with after market pipes and the only pipe that didn't give me trouble was the Pro Circuit pipe my DG and PSI pipes would crack and the welds on the mounting brackets would brake from vibrations over time.
Where’s the death trap banshee ? You gotta ride that thing atleast once my dude .
@bozobuiltit
3 жыл бұрын
its right in the vid look close n youll see it next to him
Love the content
WE WANT THE QUADDDDD...love the videos but wish you’d do one thing at a time 🤣
Love the video very nice
I’m so glad I found you bro you taught me so much over just a month of time
@supertedogpriken
3 жыл бұрын
i feel sorry for you guy.... This is not the right guy to be learning from.
@only_yamaha9075
3 жыл бұрын
@@supertedogpriken whatcha mean
@supertedogpriken
3 жыл бұрын
@@only_yamaha9075 The way this guy is "fixing" stuff is the wrong way of doing it. His ways usaly does more harm to the bikes then a permenent fix. Just like in his last video. He started up the bike and let it run for 20+ minutes with no oil. only a litle coolent. ALL bearings inside the engine is now junk. Yes they will hold up for a few rides(top speed run and selling it to the next guy) And then the poor guy that buys that bike will have a total engine failure within a couple of houers of riding. And all that JB wield on the wather pump is the worst way of "fixing" it. Should have had it wielded or aluminium brased. And superglue on the exhaust is just stupid. it would hold up for a short ride or two, but 10-20 minutes of riding and it will fall off. And this guy has had hundreds of bikes so he should have learned to fix things correctly, but no. If you want some one to learn dirtbikes from you should watch guys like: Highlandcycles or Cameron Niemela. Those two guys are pro`s at fixing dirtbikes.
@codenamenoob4973
3 жыл бұрын
@@only_yamaha9075 God help you 😂
When is the next part for the mule coming out. I’ve been waiting for that.
Best epoxy that I found is marine Tec works great
What do you do with the bikes after repaired? do you sell them or do you have a huge inventory?
That bike is mint!
I have an 87 CR 125 and it's the most reliable bike I've owned. Followed close by my 86 Yz 250
Do you still have the 1980 basket case cr250? Did you ever get the shocks for it and are you able to do a ride video on it? The '80s CRs are my favorite MX bikes. thanks!
Joe - you the Man. :D
i have just finished a 1984 CR500 the last of the air cooled 500's. Im sure i brought my seat cover from the states. And mate your going to struggle finding side plates, there are a few after market items which i tried and they were crap
Next time mix it on flat cardboard mixes way better, and use a popsicle stick to apply it, it works really good. 😀 she is super rough inside there but the rest of it is pretty dam clean. It also needs the ( pro link )sticker for the swingarm!!!!
Have you been working on the mule recently was it a scrap project for parts or is it not saveable? Or is an update coming soon?
One thing you have to realize, the crankcase oil is only for the transmission, your fuel is what lubricates the piston and crank, so always use plenty of good two stroke oil in the fuel. Just an FYI for old Can-Am owners, leave the oil injection on the motor, there’s an oil slinger on the crank that needs that oil, they will blow up if you premix them.
Another one saved....hell yea...
@supertedogpriken
3 жыл бұрын
Another what is saved?? The bike in this video is NOT saved. it is hold togheter with hopes and dreams. The engine is literally glued together. And running the engine for 20+ minutes with only coolent and NO oil in his last video. The whole engine needs a rebuild and all bearings need to be changed out.Yes it could hold together for a few rides. But in less then a hour the engine is gone break dow in a BAD way.
Man that water pump bearing was kinda iffy, good job tho nice bike
You might want to buy yourself a set of hose picks. They are fairly inexpensive and they make removing stuck hoses much easier. Also they keep you from breaking off hose fittings.
18:32 when life gives you lemons 🍋😂
I ordered a seat cover from Taiwan for my 1986 Honda ATC 200x build and I received it in 6 days.
using regular coolant will do that after along period of time. i use ice logic coolant.
Go to DC plastics for seat cover seat foam and decals also number plates they got it all
Can you do a Crf150r rebuild @2vintage
Did you break the bolt at 18:30? 😂🥵, fast cut.
Pour water on pallet paper if it runs off, it is gasket paper. It works pretty good.
Race gas go to Any drag strip cam2 or turbo blue. Seat cover any upholstery shop, cut out cr on cricut spray white or red.
Great guitar intro, is that Vinny or Jade?
What did you “open up” to get the coolant flow once the screw was off?
@Scratchen2
3 жыл бұрын
The radiator cap.
Get yourself a radiator pressure tester at harbor freight. It connects to where the radiator cap goes and you pump it up to like 12 psi. If the pressure goes down you know for sure you have a leak. Otherwise Your just guessing like in the video.
My exhaust it cracked have no fear gorilla glue is here
@2vintage
3 жыл бұрын
Haha temporary fix so I can ride it.
@sevendyseven4090
3 жыл бұрын
@@2vintage Under 8mins (when hot) under throttle is my predict it blows off.
@uriahpolite1594
3 жыл бұрын
@@2vintage hahah your channel so deserves more subs one of my faves
JB Weld n Super Glue = new bike lol, jk good job bring er back to life
Wheres the Custom Banshee at?
where do you find all these vintage cr's
What's considered "vintage"? The thought just crossed my mind
keep it up
That o fuck moment when the ratchet slipped 😂
when are you gonna make a video on the 100hp quad?
@2vintage
3 жыл бұрын
I just made it. Video coming soon!
@stepbro-chase6790
3 жыл бұрын
@@2vintage nice
Did you strip bolt on wheel
Are you looking for oem graphics ?
So you really think that glue is going to hold up on that pipe? HAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHAHHAHAHAHA, I was not aware this is a comedy channel but now I am convinced it is
@thamenace9985
3 жыл бұрын
It's a circus channel and Joe is the leading 🤡 😂😂
Dig the Iowa State hat!
Super glue on an expansion chamber......🤣
Pop that water pump bearing out, glass bead the whole case, and water pump neck, get rid of 30 year old jb weld, hit it with carb cleaner, and air. Let new seals soak in regular ATF for 2 days, they will swell. Put new jb on cases & pressure test cooling system 5lbs- 8lbs max. Resemble use ATF "NOT ENGINE OIL 10W-40"!!!!!!
you should get a newer rmz450 they’re pretty awesome bikes
What’s up Joe
Anymore kawaski mule videos??
@2vintage
3 жыл бұрын
Yes Friday!
Pleas joe do a yfz 450😫
Best thing to g Do is heat up some tar, and paint it behind where the water pump propeller is. A thin coat, but Soda blast it first to bear magnesium.Never have that problem again