I feel bad for that cts-v owner😢. Good thing LMP Is going to get him done right

That thing is night and day better! Great work guys 🙌 that front tank is so sick too

That Cadillac is heart breaking.. if someone did that to there own car so be it. But to do something like that to someone else’s is not acceptable

You have some great techs that actually love and take pride in what they do. It really shows, keep up the good work👍

We call them Rescue Missions. The bad shops keep the good shops busy.

Holy fucking shit that V………..

Love the work you guys done... Poor car whoever worked on it b4 hand...shouldn't be working on any car full stop 😲😲😲 cant wait to see how much it picks up now

NGL... even on a 5th gen; ported blower, cam, headers, meth and cooling mods make for a mega daily runner. 750-850whp with heavy torque = #perfection

Wow 😱. That V is jacked! Where do you even start lol. Glad the owner wised up and got the car the correct shop to actually have shit done right!

Learned my lesson letting certain ppl work on my car.

Beautiful tanks!!

Dope shop 🔥

Respect for using BMRS hose and hose ends

Love my Edelbrock 2650 almost 5 years strong

That's krazy glad lmp got the caddy rite,, I wonder what shop did it,, HABBIE SAUCE LOL LLS LMFAO 😂😅

Has to be a backyard mechanic, it can't be a shop.

Awesome job! I noticed that the V3 did not have the strut tower brace installed; do you feel that would be an issue?

Keep em comin boyz!

Bumper tank looks sweet but my only thing with it is looks like it takes up about 20% of air flow going in the radiator. And there’s always a lot talk about cooling but never to option in the interchiller I know you made claims that they junk but they seem be proven across the board

@jonf2009

Жыл бұрын

They probably hate them because it requires the customer to check the tank for the chiller and monitor the pump life.

That guy looks like Jamal Murray 😅

I need to come to your guys dyno! I might have a HP freak motor.

Hi there, thinking about getting your lid for my LT4 1.7. How much taller is it of a 2022 ZL1? The newer ZL1 look taller then earlier models. Extra 30 RWHP?

Go back to stock and make sure it works then do it right. Save yourself from more headaches in the long run.

Can the ice tank be ran with a weapon x boost chiller?

That lid is awesome

@dontcrack3974

2 ай бұрын

I love it

Do you need to bleed the system when you put on y’all’s lt4 lid ? Also does it require a tune ?

@LateModelPerformance

Жыл бұрын

No you do not need to bleed the system to swap the lid and we note that you should have it re-tuned after, but not all setups will need adjustments. It all depends on your setup and previous tune. But to be safe yes

That thing makes my FRS look like a premium build, jesus 😅

Unfortunately, this type of sloppiness is very common. Meticulousness is appreciated because it is rare.

Yup, I need a V.

Nice video

This is so sad. This is why I am terrified of having anyone touch my car. That’s why I do everything myself. So sad that this was done to such a nice car. And even sadder this happened to the owner.

That tank isn't touching the heat exchanger? Looks really close.

If I drop off my Zl1 to your shop are you guys able to tune it on 91 since my state only has 91 pump gas?

@LateModelPerformance

Жыл бұрын

Yes of course, but you would probably have to provide extra 91 or make sure it’s on a full tank as we don’t have 91 where we are.

Where is your shop at? How much to LS swap my 2 door OBS Tahoe?

What about road racing with the larger tank? I’d think it’s not needed because the cars always in motion keeping the SC cooler and it’s blocking half the radiator which could overheat the motor vs overheating the SC like on a drag strip.

@LateModelPerformance

Жыл бұрын

Not true at all, you are way harder on the car for longer periods of time on a road course and the blower just gets hotter and hotter. The hotter it gets the more timing is pulled the less power you make.

@neckofthewoods24

Жыл бұрын

@@LateModelPerformance but the radiator? It blocks the upper half. I mean Chevy even hollowed the bow tie out and now the tanks in the way. Could you make a smaller one? One that’ll never see ice or be emptied?

@CarsonHoltt

Жыл бұрын

This V3 has a Weapon X heat exchanger which is a lot thicker than our heat exchanger hence why it looks like it’s blocking airflow, ours extends lower down to capture more air and because of the slimmer design on ours, air still has room to pass through the top section of both the heat exchanger and the radiator, there is no downside to these mods regardless of how your driving the car, this is what we do everyday homie!

@neckofthewoods24

Жыл бұрын

@@CarsonHoltt no I was just talking about the 3 gallon tank. The pics on your site for the ZL1 looks the same amount of coverage. Just for reference, what are the 3 “radiators” in the front of my car? Which order do they go? I’m assuming a heat exchanger for the SC, the AC condenser and the radiator? Is that the order too?

@CarsonHoltt

Жыл бұрын

@@neckofthewoods24 I understand what you’re saying, its hard to explain these things in a comment section with no visuals, stay tuned im going to try to go into detail some about this question with the camera so there is a visual to help!

Any video of it on the Dyno yet?

@LateModelPerformance

Жыл бұрын

Yes we will have some new videos soon

"...look JUST like something else we make!..." :)

Think that's horrible, you should see the the half million lambo Sheepy has to redo with the ghetto turbo kit another shop put on. Hell maybe it the same shop that did this job. It was a video they just posted this week.

Hmm wonder who built that thing

Pray performance car be like

I would love to see you worked on a CT4V black wing 2023 to boost the 472 hp V6 engine

why would you put the gauges right there!? lmao wooow this thing is a nightmare

Wow. That poor CTS V. Holy shit thats bad.

Question guys can a 800-850 hp car use regular pump gas or it must use e85? and can it be driven daily?

@user-pl7lr5dn8q

Жыл бұрын

if ur asking these questions on youtube u should be buying or doing that what so ever

They *u*ked that V man to drop 80-100k on a car and take it to a place like that is beyond me

and the worst part is... he cant sue or get the money from those slimy type of shops. Well at least in Ga lmao.

unreal

Cámara guy like’s to talk a lot!!

Sheesh

who hacked up that car ?? whoever did that should throw away all their tools and never touch a car again ... wtf !!! hope you can fix it right !!

Call out that pos shop

Damn shame we have scammers in every aspect of life…

Bunch of hacks opened a shop and added the words "Performance" to the name, which legit makes them a Performance Shop. I would slap the person cutting holes through the truck. So Sad

bruh whose the camera man?? dude dont let no one talk jesus christ

Anyone know the owner to this car? was looking to buy a V3

What a mess, 2 people talking at the same time....

If your not going to put the name of the shop or the name of the guy who did it. PLEASE BE QUIET and don't POST THE VIDEO

@kyleyoung5754

Жыл бұрын

It wasn’t a shop nor did the guy that worked on this car build anything else to our knowledge

@LateModelPerformance

Жыл бұрын

It’s never professional to call out other people by the names. And we like staying professional!

@StevenDec13

Жыл бұрын

@@LateModelPerformance sounds weak but gotcha

@PhillyDee215

Жыл бұрын

Does a Roto Fab big gulp cold air intake for a CTS-V3 need a tune?

@Boostisablast

Жыл бұрын

@@PhillyDee215yes. It says that when you purchase one.. don’t try it without.

I mean does the cv get hot since you covered up half the air flow into it

These bullshit shops need to be called out to keeps other people from making the mistake of using them!

The quality of work just isn't there, especially on such a fast vehicle all that work needs to be removed and redone...

Rizz? You lost me. Bye