I thought everyone knew this...

Автокөліктер мен көлік құралдары

In Today's video we baseline a 2023 ZL1 and show you how easy it is to install our meth tank. We also finish up installing a Kong Ported Blower on a CT5-V & ZL1, talk about our upcoming sale and have a quick PSA.
Our Website - lmpofmd.com
For appointments and quotes please email office@LMPofMD.com
Don't forget to follow us on facebook and instagram - Late Model Performance

Пікірлер: 73

  • @dankolicious10
    @dankolicious102 ай бұрын

    Great service announcement. People think just having the power, makes the car quick. Everything else needs to be set up to put it to the ground properly, and it takes a decent driver at certain power levels to properly drive high powered cars. If you aren't gathering data and making the right changes to get a consistent final product, don't expect to be quick, no matter how much HP you have.

  • @HennyTRX3773
    @HennyTRX37732 ай бұрын

    You mean u don't have a "Record Breaker " tune only lol. People are nuts

  • @hatch450sx3
    @hatch450sx32 ай бұрын

    Great video keep it up. Sorry people have insane expectations. Have a great holiday weekend

  • @jkrych26
    @jkrych262 ай бұрын

    I feel like most people don't understand that ET is a measure of traction whereas the trap speed is the true barometer of the car's horsepower/tuning. So when they run high 10's but trap 140+ the car is more than capable of going mid to high 9's, it's just the driver skill at that point

  • @oliverbryan6883

    @oliverbryan6883

    2 ай бұрын

    And people that think that power is the only thing that gets down the track. People don't worry about suspension or anything but hp.

  • @jkrych26

    @jkrych26

    2 ай бұрын

    @@oliverbryan6883yes! 100% there is a lot tuning suspension that contributes to great 60 foots and ET's, lots of the NHRA stock eliminator cars will run great ET's with low trap speeds but they're suspension and tire setups are even more critical than the power plant themselves

  • @That_Corvette_Guy
    @That_Corvette_Guy2 ай бұрын

    Amen!! Great message lo those that don’t get it. Definitely appreciate all you guys do. Keep up the great work 😎🙌

  • @Rome__king
    @Rome__king2 ай бұрын

    I wont lie as a blvck man when I heard "dont say nothing racist" I had already said in my head these men be working like... in the exact moment i fell out rollin from laughing man! LOL ! If you develop any kit for the conversion kit or that heat exchange/cooling tank kit studied and proven for the C8 Z06 let the streets know fam!

  • @olveramelinda

    @olveramelinda

    2 ай бұрын

    Man today I went to the warehouse today my normal delivery guy said what’s up. I said YOOO MICKEY white guy. Mikey’s says just here slaving away 😆

  • @Rome__king

    @Rome__king

    2 ай бұрын

    @@olveramelinda hahahahahahaha 🤣 priceless!

  • @jeffnoob8448
    @jeffnoob84482 ай бұрын

    Dam good baseline

  • @jamesmayo8082
    @jamesmayo80822 ай бұрын

    Another great video,love the meth tank’s capacity,making another list 😊

  • @xTraculx
    @xTraculx2 ай бұрын

    Couldn't have said it any better Alec!

  • @Clutch_Kick187
    @Clutch_Kick1872 ай бұрын

    Didn't realize stock ZL1's only make 10whp more than my HCI SS 1LE.. And why does everyone think they need a 2650.. Those small top mounts make such fun low end grunt and spool up so fast that I would never want a 2650 until I had completely maxed out the existing stock blower.. I don't get the guys with brand new cars, hardly even driven, thinking bigger is always better, and believing all the "numbers" posted by salesmen on the internet..

  • @LateModelPerformance

    @LateModelPerformance

    2 ай бұрын

    Had a rotofab intake on it so technically not “stock” prob 10-15 more than bone stock.

  • @shotss-si3ze
    @shotss-si3zeАй бұрын

    Great vid. Well said with good explanation for the ignorant people that dont understand how everything needs to work together.

  • @Supjesus
    @Supjesus2 ай бұрын

    These dudes probably launching their cars on street tires with 38 psi with traction all the way on with no prep 😂

  • @yaboyghe
    @yaboyghe2 ай бұрын

    Do you guys have a 1k HP package for a ls3 ? I have it in a Chevy Monte Carlo 86 SS

  • @keywiththez
    @keywiththez2 ай бұрын

    🐐🔥

  • @user-vh1sd7tb4p
    @user-vh1sd7tb4p2 ай бұрын

    What’s the shop consensus on building the 6th gen ZL1’s and C7 Z06’s auto trans. Does one car react better for street racing and drag racing? Are they pretty similar because it’s the same motor? Or does the 10 speed perform better than the vettes 8 spd?

  • @JustinMcFly1980
    @JustinMcFly1980Ай бұрын

    Nice

  • @Contreras-z4e
    @Contreras-z4e2 ай бұрын

    🔥🔥🔥

  • @pacometaco22
    @pacometaco222 ай бұрын

    Willis Built !

  • @jamesnj3454
    @jamesnj34542 ай бұрын

    Does your shop couch touch the wall?

  • @LsxSosa

    @LsxSosa

    2 ай бұрын

    😂😂😂😂

  • @hatch450sx3

    @hatch450sx3

    2 ай бұрын

    AMRY 🫡

  • @olveramelinda

    @olveramelinda

    2 ай бұрын

    Of course not !!! There is no sofa 😆 YDBT AMRY BIHHHHH

  • @Contreras-z4e

    @Contreras-z4e

    2 ай бұрын

    Bruhhh😂 That couch is priceless

  • @just.a.memoir

    @just.a.memoir

    2 ай бұрын

    Amry🤘🏽

  • @ctvette1318
    @ctvette13182 ай бұрын

    Great video! Do you no longer use a hub dyno? What happened to that?

  • @LateModelPerformance

    @LateModelPerformance

    2 ай бұрын

    Yes of course we do, we even said in this video we will use it for the testing of the intake we make.

  • @sellickusa
    @sellickusa2 ай бұрын

    Suspension needs to be tuned just like the motor. ......or seat time as stated

  • @mhousto20
    @mhousto202 ай бұрын

    More of the white Camaro racing.

  • @LateModelPerformance

    @LateModelPerformance

    2 ай бұрын

    Coming soon!

  • @a_zula1
    @a_zula12 ай бұрын

    imagine having to tell someone motor work isnt the only thing you need to do to run a number… didnt think that needed to be spelled out

  • @cassellracing
    @cassellracing2 ай бұрын

    Look at Timing towards end of Pull, I bet it's spiking with Factory Tune, hence the jump in HP.🤔

  • @commentcrusader
    @commentcrusader2 ай бұрын

    Tell those guys to just buy a used plaid for 60k and they can run low 9s as much as they want.

  • @jkfonyi

    @jkfonyi

    2 ай бұрын

    If you can get a running non salvage title plaid for anywhere near 60k let me know where

  • @commentcrusader

    @commentcrusader

    2 ай бұрын

    @@jkfonyi CarGurus has multiple at 64k and even lower. Same with Facebook marketplace. Clean title cars. Tons of them in the 60s

  • @midnight347

    @midnight347

    2 ай бұрын

    There is 0 fun in that. It's the most boring 9 second car that's ever existed. I didn't think it was possible for a car that fast to be that boring but the ev have accomplished just that. Nobody cares about a plaid. You can buy a jet and go faster too, nobody cares. Those aren't even cars in this sense and shouldn't even be compared. They're closer to a kitchen appliance.

  • @ryandoyle4344
    @ryandoyle43442 ай бұрын

    Only way to get a time, buy a Plaid. After a few identical passes, most prefer attempting to improve.

  • @kb9gkc
    @kb9gkc2 ай бұрын

    10,000 hour Rule, to become a master of drag racing it will require 10,000 hours doing it. No shortcuts available.

  • @marcasswellbmd6922
    @marcasswellbmd69222 ай бұрын

    If the guy was smart he would have brought energy drinks.. I know these guys are for real!, but I wouldn't want anyone drunk around my car...

  • @arlograham9505
    @arlograham95052 ай бұрын

    Do you got anything for Chevy ss like front coolant tank like u do on the ct5 v black wing

  • @LateModelPerformance

    @LateModelPerformance

    2 ай бұрын

    The SS isn’t factory supercharged so anything we do for one would be custom it wouldn’t make sense to mass produce on our end.

  • @BurstIntoFlames
    @BurstIntoFlames2 ай бұрын

    Trying to purchase Zl1 front tank but site keeps giving error message about fraud. Is something wrong with your website?

  • @LateModelPerformance

    @LateModelPerformance

    2 ай бұрын

    It is all fixed and resolved sorry about that.

  • @BurstIntoFlames

    @BurstIntoFlames

    Ай бұрын

    @@LateModelPerformance thank you. Arrived in WI today, can’t wait to get it installed!

  • @CamaroThings
    @CamaroThings2 ай бұрын

    Wait... so you don't provide racing school 🤔? #Unbelievable 😂

  • @mjboy8790
    @mjboy87902 ай бұрын

    That rubber hose with white stamping you split and used on edge of cover under hood by cooling tank looks like ass on the blue zl1.

  • @dnlescalante7
    @dnlescalante72 ай бұрын

    How come black wings make a little more power than Camaro their both lt4’s

  • @CaLiKiLLa01

    @CaLiKiLLa01

    2 ай бұрын

    Injectors

  • @Bsaint

    @Bsaint

    2 ай бұрын

    Most likely the global B and factory wide band they can “self adjust” and adapt the tune where as ZL1s and C7s can not.

  • @midnight347

    @midnight347

    2 ай бұрын

    ​@Bsaint they just now got factory wide bands and the c7 and camaros don't even have it? Mustangs had that in 2011.

  • @Bsaint

    @Bsaint

    2 ай бұрын

    @@midnight347correct

  • @thegonz7833
    @thegonz78332 ай бұрын

    No doubt you know to get down the track, you sell proven by you packages. Not Tom Dick and Harry

  • @DEADPOLES
    @DEADPOLES2 ай бұрын

    I have a 2014 ss 6 speed tuned 700hp 650 tq quick question twin turbos otw all mods but I'm lowered 1.5 with 335/25/20s with new twin setup would I need do do anything about the drop or tire size? Thanks

  • @Harlo86

    @Harlo86

    2 ай бұрын

    With 1k plus hp I would think your gonna need to be on a 17 or 15" drag radial to get best traction otherwise you're making more power just to spin. Mickey et street ss 20" drag radial has good reviews but idk if I'd work with that much power rwd.Let me know what you end up using and the suggestions you get. I'm going to build a g8 so would like to know.

  • @DEADPOLES

    @DEADPOLES

    2 ай бұрын

    ​@Harlo86 that's what I thought drop down because like you said traction is an issue. Thanks brother 😎👍

  • @shotss-si3ze

    @shotss-si3ze

    Ай бұрын

    Do suspension my guy

  • @boostedbavarian
    @boostedbavarianАй бұрын

    Shit I thought this was LMR for 2 weeks lmfao

  • @michaeldyer6304
    @michaeldyer63042 ай бұрын

    Some people just have more money than brains...Sorry

  • @MiturBinEsderty

    @MiturBinEsderty

    2 ай бұрын

    I saw the same type of guys buying brand new fox bodies back in the day and dropping 25 grand on mods. And it gets you nothing in the end.

  • @TheTowTruckGuy24
    @TheTowTruckGuy242 ай бұрын

    I didn't realize that you guy's even worked on cars. When I called about having some work done on my car all I got was excuses as to why you couldn't do the work.

  • @LateModelPerformance

    @LateModelPerformance

    2 ай бұрын

    I’m sorry we don’t work on everything.

  • @cocacola3269
    @cocacola32692 ай бұрын

    Coyote makes that with 1 mod lol

  • @olveramelinda

    @olveramelinda

    2 ай бұрын

    Not everyone is gay. Thats on the AMRY

  • @joshtalbot1086

    @joshtalbot1086

    2 ай бұрын

    No they don't lmao

  • @olveramelinda
    @olveramelinda2 ай бұрын

    Everyone knows mustang owners are Diddy’s. No offense to my crew the AMRY. I’m just mad cause my dumbass camaro trans 😊is on its second rebuild after 100 miles

  • @MiturBinEsderty
    @MiturBinEsderty2 ай бұрын

    Did they ever think losing 100 lbs would help their car

  • @user-vh1sd7tb4p
    @user-vh1sd7tb4p2 ай бұрын

    What’s the shop consensus on building the 6th gen ZL1’s and C7 Z06’s auto trans. Does one car react better for street racing and drag racing? Are they pretty similar because it’s the same motor? Or does the 10 speed perform better than the vettes 8 spd?

Келесі