These Parts WILL (KILL) & (DESTROY) Your BMW N51/N52/N52K Engine !!!

Автокөліктер мен көлік құралдары

These Parts WILL (KILL) & (DESTROY) Your BMW N51/N52/N52K Engine !!!
Click Here to buy the Forte Power Steering Treatment
amzn.to/2ycpjd1
Click Here to buy the Temp Gun Used In my video
amzn.to/2U92AWE
Click Here to buy The LED Bulbs shown in my video
amzn.to/2Q89zxR
Click Here to buy The Forte Gearbox Treatment
amzn.to/2SPewgF
Click Here To Buy The Autel MaxiCOM MK908P
amzn.to/2Sh8aq3
Click here to buy The Glovebox Scanner
amzn.to/2GbNN6W
Click here to buy the Oil system Protector
amzn.to/2rNmXyz
Click here to buy the forte advanced engine motor flush treatment
amzn.to/35mxfnJ
Click here to buy the camera used for my videos
amzn.to/2PJpe5H
Click here to buy the camera holder used to film
amzn.to/2YO1elR
Click here to buy my second camera used for filming
amzn.to/2RRJyV3
Click here to buy my third camera used for my videos
amzn.to/34j1Cu0
Click here to buy the tripod used for my filming
amzn.to/38EE6eb
Click here to buy the ICOM used in all my diagnostic videos
amzn.to/2YMjBrD
Click here to buy the K DCAN Cable used in my videos
amzn.to/38Najic
Click here to buy the cable needed for F & G series cars
amzn.to/2sqp2Ao
Click here to buy the Forte Petrol Saver
amzn.to/2P33bYu
Click here to Buy Forte Oil Fortifier
amzn.to/2s6f3Qh
click here to buy the forte seal conditioner for valve stem seals without removing head and rear main seal
amzn.to/33Y7ubY
click here to buy the forte top end treatment for diesel and petrol cars
amzn.to/2P2lcX2
click here to buy the forte injector cleaner for all PETROL cars
amzn.to/36e0Mjr\
Click here to buy the forte injector cleaner for all DIESEL cars
amzn.to/38h7hnp
#BMWN52 #BMWN51 #BMWN52K

Пікірлер: 87

  • @five10freak1
    @five10freak14 жыл бұрын

    Awesome info!!! Thank you. Love my e90 n52.

  • @ricardos2033
    @ricardos20333 жыл бұрын

    crazy how i’ve had my e92 for 6 years now i’m the 2nd owner and i’ve never ran into any of those problems and i daily it

  • @vaclavcvach6161
    @vaclavcvach61614 жыл бұрын

    Thank you Doc, I still have the Disas and valvetronic and ccv to change then. Valuable Intel for those loving their Beemer.

  • @Africa_Memphiz
    @Africa_Memphiz2 жыл бұрын

    He is so on point. I experienced just about all of those issues.

  • @NicolasRodriguez-iu5ii
    @NicolasRodriguez-iu5ii Жыл бұрын

    You can actually get a code out for DISA. 2AA9 DME: Variable intake system, servomotor 2: activation. Also, I had 2A87 DME: Exhaust Vanos, mechanism and I thought I had to change the actuator, however after I realized my flap was gone and almost into #3 cylinder, I got a new DISA and it solved both 2AA9 and 2A87.

  • @jasoonjackson5340
    @jasoonjackson53404 жыл бұрын

    Another fantastic video, can you do a video on how to check the disa using ista

  • @igorkrstevski9436
    @igorkrstevski94364 жыл бұрын

    Hello doc I have engine oil leak and oil consumption issue I think leaks from the intake manifold from the first two pipes leaking, on my BMW 530 ix n52 engine, I already have changed walve cover gasket , engine oil pan gasket, oil cooler both gaskets, and I still have leaking, and oil consumption can you please help me out, what is the next place I should check where there is a possibility the problem can be? Thank you . You have the best videos.

  • @teemccallum7543
    @teemccallum75434 жыл бұрын

    This is a great video! I'm gonna repair or check everything you mentioned. I have the oil filter housing leak and was told to buy housing, radiator, hoses pipes etc. BMW said just the housing gasket. I have not driven the car except when it happened. Leaked into the coolant. What's the best way to flush the out of the coolant? Please clear my mind...

  • @lp2565
    @lp25654 жыл бұрын

    Excellent video on this engine. Thanks for sharing Dean.

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    cheers lance

  • @dogger2186
    @dogger21863 жыл бұрын

    Great channel, have a questions about the DISA Valve on the N52N engines. Which DISA Valve is more prone to failure, really only see video and post for the outer DISA never the inner and is the DISA valve as big concern on the N52n engines? I have a 2007 X5 3.0si that I am having random rough idle when cold and then a stumble if you tap the pedal to rev. Also from a dead stop around 2l-3k there is a hesitation. Then will hear a rattle from the engine compartment after it picks back up and continues to accelerate....any thoughts?

  • @Aschmorr
    @Aschmorr4 жыл бұрын

    Well I know what motor I never want now 😂 my E39 likes to slam into overdrive if I drive it to easily, so I’m always giving it more beans, I really love these cars though nothing like em

  • @sirloock8360

    @sirloock8360

    3 жыл бұрын

    The N52 is BMWs most reliable engine. If you check these things and perform regular maintenance these engines will last for years. Not to mention how easy these engines are to work on compare to other BMWs.

  • @bigdfitness5020

    @bigdfitness5020

    3 жыл бұрын

    Easy solution, don't drive an automatic 🤣

  • @eman9372
    @eman93724 жыл бұрын

    Hey Dean took your advice and took off the disa the bigger one, and the flap is loose, leaded me to take the whole intake manifold off to check the smaller one and the gaskets seems fine but its stuck open, the intake manifold has a coat of oil in it as well, how should I approach this, other than the obvious repalcement of the disa valves

  • @macky322
    @macky3224 жыл бұрын

    Is there a recommended interval to replace the DISA valves? I'm at 115k and the DISA valves are the only parts left that I haven't replaced.

  • @lliambruce
    @lliambruce4 жыл бұрын

    Hi, been watching you on KZread wondered if I can pick your brain for a little advice, I have a 05 e90 having problems with the key, fob will lock the car every time but won’t unlock, need to use the key blade, boot unlocks with fob also, I’ve checked all the fuses, no faults shown in the CAS, I’m thinking the fobs knackered? Just looking to see if you have any advice, cheers

  • @trident5946
    @trident59464 жыл бұрын

    Hey dean i got a question i bought a 535D e60 2005 and the revs are boucing up and down and causes it to shift weird i suppose do you think its the torque coverter ?

  • @joelfurlong1929
    @joelfurlong1929 Жыл бұрын

    Hey Dean, excellent information here!! I have just purchased an e87 130i, and I would like to be able to read the ecu, can you please recommend where I can purchase the correct cable and software to be able to diagnose and check the engine. I am especially interested in being able to check the DISA valves as you recommend. Thanks, joel

  • @mosaqib88
    @mosaqib884 жыл бұрын

    Hey Doc, need some advice. I have a 57 E60 530d not mapped got arounf 93k on the clock. Iam getting a weird duck sound seems tobe coming from the engine area, wether its sitting idle or 2k revs the around doesnt get louder. Any ideas?

  • @jeridnosol5071
    @jeridnosol50714 жыл бұрын

    Hi. Mr BMW I just got my e60 530i and I have no forward or back either can please tell me what I check for to fix this problem? thanks.

  • @pistons_n_bullets5879
    @pistons_n_bullets58793 жыл бұрын

    Had that pin go into cylinder 5, but thankfully it was caught between the valve and the head and the cylinder and piston look fine

  • @robtankbuster5215
    @robtankbuster52154 жыл бұрын

    My wifes 2009 X5 i30 just had the water pump fail at 135k and the over heating lights came on the X5, suv was pulled over very quickly and parked towed to shop, all new pump ,thermostat and many hoses replaced at a indy shop. Well have always did the oil and filter change myself on are cars. Just did the X5 and the oil filter had a lot of very tiny rubber specks on the filter material. What do you think this is from? Thanks for any help.

  • @sysakPL
    @sysakPL4 жыл бұрын

    Hey doc. My dad has a 2006 525i with the N52 engine and am quite worried about it. At wide open throttle higher up in the rev-range I can hear a noticeable high frequency knock/rattle coming from the front of the car. It used to have an issue with one of the Vanos solenoids throwing fault codes and was going to replace them but in the meantime oil flush and change seems to have solved it. Now about a year later the codes are still not coming back but i've got this weird sound. Am i likely to actually hear engine knock? (fuel detonating due to timing being off) or do you think it's more likely it's a rattle of some sort? (I'd say it sounds muffled and plasticky) Surely the engine would have gone bang long time ago. Sorry to bother and ask you to look into the crystal ball but I live thousands miles away from my dad and the car, so can't really offer any support and I am hoping it may be a common problem you will spot by the description. We've got the car in the family since almost new and it would be a massive shame if it was to really go wrong. Cheers!

  • @albertrosario5077
    @albertrosario50774 жыл бұрын

    Hey Doc i have a 2007 e90 328i N52 engine with the code CDBE - DME: Message(nominal torque request, BB) and my car is on limp mode. Some people had told me that it could be the throttle body itself, but i dont want to just replace parts without being sure, what do you recommend me?

  • @ladalou
    @ladalou3 жыл бұрын

    I love you doctor.....how do i mhd flash a 2007 530xi ...its a unique engline a dme apparently...when i ush mhd n54 it saids wrong dme......is there a better program,....and where do i get inpa or impa and how do i use it mate...please help.

  • @avigopinath6716
    @avigopinath67164 жыл бұрын

    Hey Dean! Excellent video and information as always :) My N52 325i seems sluggish and I took out the VANOS to change the o-Ring Gaskets. I noticed one of the Vanos solenoid body had a lot of abrasive scratches on it..any idea what it could be ?

  • @losidude11

    @losidude11

    2 жыл бұрын

    Replace ur coils

  • @hudsonrogers9362
    @hudsonrogers93624 жыл бұрын

    I have a bmw 2007 525i n52 based on the codes that I have 2a9a 2a9b Inpa error type code for both says “signal or value above threshold “ I have tested the camshaft sensors they have correct voltage I have tested/ cleaned the vanos they have the correct voltage I have cleaned the non return valve I have performed a compression test the results were ok I have performed a fuel test with a cheap O’Reilly fuel test rental and the results were accurate but after 10 minutes the pressure would drop 30 psi the adapter didn’t fit properly on the fuel injector valve so the test wasn’t %100 accurate I changed the battery I changed the oil the inpa engine speed rpm is 224.rpm . I need some assistance on where I should go from here any advice would help thanks

  • @mromagachi5194
    @mromagachi51943 жыл бұрын

    can u make a written list papa much love love ur videos

  • @agsession7664
    @agsession7664 Жыл бұрын

    I have a crank and runs on starter fluid. But wont run on gas. 80psi at the rail...any suggestions

  • @daliborpodobnik9010
    @daliborpodobnik90104 жыл бұрын

    Excellent video......👏🙏

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    thanks very much

  • @stefandragu7066
    @stefandragu70663 жыл бұрын

    Hi Doctor! N52b30 or N52b25? Thank you!

  • @kratos9174
    @kratos91744 жыл бұрын

    Thank you doc Again You are the boss By the way i still fighting to get the vanos filter to clean, IMPOSIBLE TO GET OUT evem taking the wheel out, i can see them x And put them back how you can do that? Suck horrible place to work

  • @CATPLAYING
    @CATPLAYING4 жыл бұрын

    Can you do a video about e90/91 common problems

  • @Kofestakan
    @Kofestakan Жыл бұрын

    What is the name of the scanner? I didn't quite catch the name. Thanks

  • @scanspeak00
    @scanspeak004 жыл бұрын

    Why don't you leave your engine cover off so that you can keep an eye on your oil leaks?

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    Because I know my car is perfect with no leaks that’s why I overhauled this whole engine and gaskets 20k ago and I hardly Drive this car so no chance for leaks I also use genuine bmw parts so I know my car is solid and I don’t have to worry about something failing all the time

  • @ther3tard475
    @ther3tard4754 жыл бұрын

    whats the name of the intro song?

  • @Chaoticssz
    @Chaoticssz4 жыл бұрын

    I have an 2011 BMW e88 n51 sulev is there a de tune on the car? Wanting to see if I can do anything without damaging the motor/trans/ having it not be reliable,.. I need more info on this thought I had an n52. Wanting to see if the n51 has any potential to be 260ish whp

  • @e90baby

    @e90baby

    2 ай бұрын

    it’s been 3 years but the N51 has a stage three manifold which with a 330i tune can give you 255 crank. Ur gonna need to do MILVS, headers, free flowing exhaust system and a better less restrictive intake system to even try to see the horsepower you want. all these mods add about 5-10hp a pop, so worth a try

  • @mostafaabbas6
    @mostafaabbas64 жыл бұрын

    Hello doctor Is there any difference between n52b30 & n52b25 ? Solenoid vanus or the 2 air gates and air math ?

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    big difference lower power band , valve stem seal issues , and only one disa not worth it stay away get N52B30

  • @mostafaabbas6

    @mostafaabbas6

    4 жыл бұрын

    I installed n52b30 can i not change mt old things ? They are in very good shape

  • @FlAvIuS861
    @FlAvIuS8614 жыл бұрын

    great vid please do the same vid if u can on m57 engine

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    I cant sorry , if EU pays more I will but it doesn't warrant enough money for me to do that engine

  • @ericsprout
    @ericsprout3 жыл бұрын

    No mention of the Eccentric Shaft sensor?

  • @ramborambo2072
    @ramborambo20724 жыл бұрын

    HI I have a bmw 525 from 206 with N52 engine it has done 350 000 km and it still drive like a dream It does use use about 4 liter oil per month and i add the most cheap oil. i done this the past 4 years the engine lamp is allways on and i been told a reoair will cost about 3500 usd its in very good shape and last week i tried a brand new diesel bmw and my old bmw drives much better. the diesel engine has a awful sound like a tractor omg,,, my next choice will be the dodge challenger sxt brand new never diesel for me the more co2 the better it is for nature...another story

  • @saltwateranglers
    @saltwateranglers3 жыл бұрын

    I have a 2007 328i and can’t find the fuel filter is it not replaceable?

  • @gilgonzalez5902

    @gilgonzalez5902

    2 жыл бұрын

    No, it is part of the fuel pump assembly so you it is not serviceable and last life of the vehicle.

  • @markgreywolf642
    @markgreywolf6424 жыл бұрын

    Hi! It's off topic but can you help me with my problem? I updated the gearbox of my 2011 128i through winkfp and now my transmission is not working because of the error while flashing the egs.

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    well why would you try and do it ???? if you followed my video thats your own problem my videos are not there to be followed most of the stuff is cut out to stop people following what you have done is NOW bricked your module and only I can solve that with special software which is NOT cheap

  • @markgreywolf642

    @markgreywolf642

    4 жыл бұрын

    @@BMWDoctor is there anyway i can talk to you in private?

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    yes its bmwdoctordean@gmail.com

  • @GregoryJohnston77
    @GregoryJohnston77 Жыл бұрын

    Forgive me if I'm an ass. But I can't understand what you said about the only way to check the codes. What did you call it? I heard via insta or something?

  • @quintonritchie3695
    @quintonritchie36954 жыл бұрын

    I get a rattle noise inside the car when it’s at redline. I can’t think of what it would be. I’ve replaced most of the parts in the video so I don’t think its a huge problem.

  • @sysakPL

    @sysakPL

    4 жыл бұрын

    Same, mate wrote a question above. Please comment if you find anything about it.

  • @HarkamalAujla
    @HarkamalAujla2 жыл бұрын

    I am from leeds. I wonder where your garage is.

  • @jonathanmilone9462
    @jonathanmilone94624 жыл бұрын

    left my 2009 e90 n51 idling for 15 minutes then a engine light came on. I immediately shut the car off and let it sit, started it up again and ran perfectly fine. no service lights on and spark plugs were serviced. i have 77,000 miles anyone have an idea what it could be. heat isn't working too well in the car.

  • @sofuknossum1

    @sofuknossum1

    4 жыл бұрын

    Jonathan Milone water pump?

  • @rreffell
    @rreffell4 жыл бұрын

    Wheres the membership link?

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    It has been delayed it’s all ready to go but because of the KUNG-FLU , CHINA VIRUS it’s been delayed Please understand it’s not free neither will it be cheap it’s about £50 a month billed 6 months in advance

  • @rreffell

    @rreffell

    4 жыл бұрын

    @@BMWDoctor ok. I've saved that much from this channel already on my n52. Looking forward to it.

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    thats good to know mate I have alot in store for it its all ready to go the video the release video and all the membership offers are all ready im just waiting on them to authorise it but there is a delay for them doing this thanks to this crap going on the video will go out the moment they authorise it and the join button will be activated

  • @Africa_Memphiz
    @Africa_Memphiz2 жыл бұрын

    Replace your coolant hoses!

  • @nosh121081
    @nosh1210814 жыл бұрын

    I check my engine everytime i go to the corner shop.

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    lol

  • @bigdfitness5020
    @bigdfitness50203 жыл бұрын

    I'm having a hard time with your accent, what is the valve you are talking about near the intake manifold and throttle body?

  • @gilgonzalez5902

    @gilgonzalez5902

    2 жыл бұрын

    DISA look it up. I believe this was only on the early N52 engines because my 09 doesnt have it.

  • @ramborambo2072
    @ramborambo20724 жыл бұрын

    2006

  • @ZvqZ203
    @ZvqZ2034 жыл бұрын

    I am in the process of purchasing 2013 BMW 535I in USA market and I would like to know if I follow your videos "BMW 100,000 Miles Parts Replacements & Top 10 Electrical That Will Fail", what would be the likelihood of me having problems with the car. Can I used parts from German market for USA BMW? Thanks, Brother.

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    No you cannot use our parts for USA market my friend as it’s completely different even engine is different you have N52K something that we don’t have here As we got rid of N52 after one year for N53 a engine you guys never got the top 10 electrical items is the one you can follow for ALL E60s regardless of engine But if it’s 535I that will be N54 engine which you would need to purchase parts from the USA mate but be warned I have done a video on this Many many parts you buy are Chinese parts manufacturer reject parts to keep you paying and keeping the shops making money that’s why you get different stuff to us as there is no quality control

  • @ZvqZ203

    @ZvqZ203

    4 жыл бұрын

    Thank you very much for your quick response.

  • @deadpoolkill2644
    @deadpoolkill26444 жыл бұрын

    M65 motor

  • @plasticbmw
    @plasticbmw2 жыл бұрын

    so...everything lol

  • @dtsect
    @dtsect2 жыл бұрын

    Regret buying the car after watching this video. I've had it for 9 years now. Is it too late?

  • @handymaneh
    @handymaneh4 жыл бұрын

    Hello! I just messaged you on IG my username is Handymaneh

  • @KB248FOREVER
    @KB248FOREVER4 жыл бұрын

    Sent you a message on IG to see about getting some Forte sent to the US

  • @BMWDoctor

    @BMWDoctor

    4 жыл бұрын

    what's your name on there mate I get about 50 messages a day on there I dont know who's who

  • @KB248FOREVER

    @KB248FOREVER

    4 жыл бұрын

    BMW Doctor Ryan B. Thanks!

  • @rubenk4237
    @rubenk42374 жыл бұрын

    Dude... are you in some rap competition or something?? Slow down dude..

  • @itzaustiin2663

    @itzaustiin2663

    4 жыл бұрын

    Keep up brah

  • @gabrieliancu6707
    @gabrieliancu67074 жыл бұрын

    Why are you always on the rush and speak so quickly? You move from one problem to another like the world it's about to end. You allso have an accent. Slow down, not all your followers are from UK. I like your info and your knowledge but it's always a pain.... to follow, to hear and understand you. Please slow down. Thanks!

Келесі