The Xtool D8BT Programming a Key for a Lexus NX200t after 2 other Scan Tools failed.
Автокөліктер мен көлік құралдары
After trying to program a key using the ThinkDiag 2 and the Launch x431 Pro I had to break out the Xtool D8BT to get the key programmed.
Xtool D8BT Scan Tool 2023
amzn.to/3Mv7yXS
Lexus NX200T Smart Key FCCID:HYQ14FBA
amzn.to/3Xjb0uO
Пікірлер: 35
Used your video to program a fob for a 2016 lexus is300. Worked perfect. Thanks
On my 2002 Acura MDX. I tried three different times to program 2 extra IMMO keys (not the newer "smart" keys) and it kept failing; (on my D8). So I tried to add just 1 key so that I could at least have a spare, and it had to pull a four digit code from the car's computer-- which it did just fine. and it Worked! So then I went back in yet again to add the third key (second spare) and it also worked fine. So now I do have three working keys, it would simply only add them one at a time; which was a bit frustrating, but at least I was persistent and figured it out. I also programmed two key fobs-- but I did that by watching a video and doing a silly sequence of turning the key on and off and opening and closing the door three times and hitting the lock button three times, etc. and those worked fine. I didn't even need the scan tool for the fobs.
Very interesting, great that the D8 came through!
I have the Launch CRP919E and it does key fob programming just fine also
i talk to a auto lock smith , and he uses the x tool alot .... and a autel im508 ..... he says he xtool does alot of keys , but isnt the best for diagnosing , good for at home use for sure
@737mechanic
10 ай бұрын
Out of those two the Autel IM508 is a professional key programmer with some diagnosing capabilities. The xtool is mainly for diagnosing problems with some key programming capabilities.
I have a 2008 highlander without the smart key and I got D7 and wasn't able to problem fob (remote) were you able to program fob key for this yrs
@737mechanic
3 ай бұрын
I believe the remote is programmed without a scan tool. At least on a 2011 Tacoma it is. Try this video and see if it helps you. kzread.info/dash/bejne/iYqiuJqKpqywdps.html
I have a question for you. With the new current updates that have been made to the D8BT, does it make sense to even purchase a D9?
@737mechanic
Жыл бұрын
The only reason to have a d9 would be for the bigger screen and if you wanted module programming on some vehicles you could get the D9 pro.
Love the Xtool D8BT! I see the app version has updated to 4.35.3_7.89. The last update added topology, I haven't had time to see if this version adds anything new.
@TurnThemWheels
Жыл бұрын
It’s great here and there but not perfect
I have ip616 xtool will this work on 2008 nissan altima its smart key, keyless entry
@737mechanic
Жыл бұрын
The ip616 does have key programming abilities but I am not sure if it has the same as the D8. You would have to hook it up and go through the menu and see if it is there.
@OLIVER949OC2
Жыл бұрын
@@737mechanic it says it works with nissan altima but I was trying to connect to it yesterday for key programming and it couldn't kept failing not sure why? But i have been able to run a diagnostic on my nissan altima and check to see what's wrong with my car and erase some codes
Does the Xtool D8BT clone a key? Or is this like a factory reprogrammed key?
@737mechanic
10 ай бұрын
it will not clone a key, it is programmed to the car like the factory-programmed keys are.
@billofalltrades2633
10 ай бұрын
@@737mechanic thank you, I appreciate your help.
Will the xtool program keys for dodge with the rolling PIN codes??
@737mechanic
5 ай бұрын
I have programmed many keys for Chrysler and jeep vehicles. The xtool has always pulled the pin codes with no problems.
@philh9238
5 ай бұрын
Even the rolling PIN numbers that are 5 digits? @@737mechanic
What if you lost the primary key?Could you still connect a new one
@737mechanic
5 ай бұрын
I haven't done it but the scan tool does have an all keys lost function on most cars so more than likely you can.
@toethumbmechanics
5 ай бұрын
Ìm about to try that with my D8. Ill keep you posted
@737mechanic
5 ай бұрын
@@toethumbmechanics Let me know how it goes.
I saw another video and I'm scared to add a key cause it ask me to reprogram all my keys I don't want to lose the only working key I have.... I just want to add 2 keys , is it possible to add two keys without unprogramming the only key I have
@737mechanic
Жыл бұрын
I added only the unprogrammed key to this car without reprogramming the original.
@OLIVER949OC2
Жыл бұрын
@@737mechanic I tried it yesterday and it failed to connect to my car when programming
Are you sure you didn't get an endorsement check from x tool? it's hard to believe that that would win out over to 431 pro. Lol
@737mechanic
Жыл бұрын
LOL, When it comes to programming keys the xtool has been very impressive.
Interesting the launch tools wouldn’t work as they are top notch
@737mechanic
Жыл бұрын
I was a little shocked that neither one of the others would complete the process. I kept getting programming failed.
Promo sm ✨