This was definitely a unique build with some challenges, but it was super rewarding to see the it all come together. Can't wait for the next one 😁

@NOOBIFIER1337

24 күн бұрын

More to come!

Good lord. Busy couple of days. I would love to setup a sim rig someday. Couple more years before I retire from the military and buy a home in a permanent spot, so just a little longer to wait. Another great video.

Awesome video as usual Noob! I live in Cheyenne, Wy. About 30-45 minutes north of where you were in Loveland. (depending on traffic) I really enjoy what you do and your attention to detail. With your voice and tone, I'm sure you can make growing grass and watching paint dry exciting! As always a great video and glad you enjoyed the view in Colorado. Sometime you will have to take a trip down for pleasure, not work and go fishing/hiking in the mountains.

@NOOBIFIER1337

25 күн бұрын

Very cool! Yeah I plan to be back. It was lovely

One day, I'll build a real sim rig. Thanks for sharing! 😊

Great video. Superb insight and build. Such a great working environment.

Very awesome rig 👍🏼 Good, clean job, as always. It was a pleasure to watch. Have fun.

@NOOBIFIER1337

25 күн бұрын

Thanks 👍

Wow. If I had that kind of money, I'd definitely be interested in that sort of thing. I'm amazed at how good MSFS can look on triple-screen.

Another great looking setup!

that is an amazing rig. great job.

What an awesome set up.

@NOOBIFIER1337

25 күн бұрын

It really is!

So cool, thanks

This is so cool!

Great personnel hangar module 😁

Wow, great job!

@NOOBIFIER1337

26 күн бұрын

Thanks!

WOW love that system wish I had that kind of resources

When I saw the thumbnail, I could not have imagined how cool this video would be.

Watching the clouds at 3:39 onwards is mesmerizing

Consider VR for a future upgrade as it now allows for a high-quality mixed reality view of the real control panels/hands

Holy shit what a cool build!

@NOOBIFIER1337

26 күн бұрын

Super fun

It would likely be better to use a riser to move the GPU out of the way of the other slots so you aren't tied to any one specific motherboard. There are many cases that have alternate positions of GPU mounts for those that use Risers.

@NOOBIFIER1337

25 күн бұрын

It worked out fine with fewer points of failure. The motherboard was the same price

I can't even begin to calculate the cost of this rig. Good for Kurt, jealous AF, but you thought Star Citizen was high cost, this is an order of magnitude more. :D

@rsilvers129

25 күн бұрын

I would guess it could be done for $35,000 if careful or comfortably for $40,000.

Always so cool.

What a sweet rig! I would love to aim to put something like this together.

@NOOBIFIER1337

16 күн бұрын

@@ecclesiastros we would love you to reach out when you are ready for one.

​ @NOOBIFIER1337 For long gaming sessions which cushion type for the monstertech chair do you recommend? I have the blackbird but I have to stop playing after a few hours because of the discomfort. ☹

Nice build. FI if you ever use a shell, it's possible to remove the internal model. All the best. May although require different G1000s then what you used here.

Just Awesome....

@NOOBIFIER1337

25 күн бұрын

Thank you so much 😀

I have been wanting to run a business that rents time in sim chairs like these, maybe have a pair of pilot focused sim setups and a few arcade versions for gaming. Reminds me of the battle tech pods that people could roll into a event space and link up for mech battles but this would be for airplanes and star ships.

@NOOBIFIER1337

26 күн бұрын

Contact me. I can make this happen

@jimjimmy3367

25 күн бұрын

@@NOOBIFIER1337 I may poke again if i find out if i can get the right loans thanks!

Yeah private hangars are like that.

Does MSFS have a setting to factor in the motion of the platform so that what it shows on the screen is adjusted to appear relative to the pilot so that the visual motion cues are correct? Is this done with a motion tracker added to the platform or maybe the motion platform gives a signal to MSFS? Or is the only way to have proper motion cueing to have the monitors move with the platform?

@NOOBIFIER1337

25 күн бұрын

It’s compensated. Also, he is installing TOBII next week

@rsilvers129

25 күн бұрын

@@NOOBIFIER1337 Will the TOBII see the location of the eyes and compensate on the screens?

@NOOBIFIER1337

25 күн бұрын

@@rsilvers129yes, just like VR

@rsilvers129

21 күн бұрын

@@NOOBIFIER1337 Is TOBII better than TrackIR for this kind of thing?

@NOOBIFIER1337

21 күн бұрын

@@rsilvers129 I believe so

Are you going to Test Moza's new FFB Joytsick base?

@NOOBIFIER1337

25 күн бұрын

I have been testing it for a couple months

What yoke did you use?

@NOOBIFIER1337

25 күн бұрын

Brunner

Anyone who can afford to learn how to fly is working on a different financial plane to us mere mortals

@FlyingNDriving

25 күн бұрын

Not entirely true, just don't spend 1000/month on that fancy bmw/truck (bed you don't use), etc that's now worth 20% of what you paid when you finally get the note from the bank.

@BlakedaBull

20 күн бұрын

Learning to fly spread out will be cheaper than a child , so I’m guessing parenthood is not too close

Why not VR? It is really odd how one of the best use cases for VR is the one where people go for oldschool multi-monitor builds. For that kind of cost you can throw in a Varjo XR-4. Many organizations choose these over screens for a reason. And with XR passthrough you can still get the tactile feedback of seeing and touching the G1000 panels.

@NOOBIFIER1337

25 күн бұрын

I mentioned why earlier in the video

@rsilvers129

25 күн бұрын

VR has a lot of issues also. Since you can add VR for $300, might as well have both.

@mhe0815

25 күн бұрын

@@NOOBIFIER1337 I am sure if you'd demo it to Kurt, he'd be so mind blown that he'd want that as an option to switch to as well. Will be interesting to see this rig grow over time if you do content of future visits as well!

@NOOBIFIER1337

25 күн бұрын

@@mhe0815 he had seen it. He prefers screens

From the description I thought "40k? You can get a small, used, real airplane for that money!" But then I learned the guy already has a bunch of planes. We are in dire need for wealth taxation.

@gumzster

25 күн бұрын

idd

@rsilvers129

25 күн бұрын

You can also get a simulator for $1000 or a plane for $100 million. Having an airplane is one thing. Paying for hanger space for it, wet costs, and maintenance is another.

@rsilvers129

25 күн бұрын

The government would just waste the money paying for gender reassignment surgery for minors.

@kaywhy1337

24 күн бұрын

Having an airplane that you can crash without consequence while learning (ie sim) is priceless.

does not need to be this expensive

@NOOBIFIER1337

25 күн бұрын

Sure it does. Its about to get even more expensive