Your attention to detail is second to none when it comes to gear updates and reviews.

I can only dream about owning a rig like this. I have neither the space or the money. However I enjoyed your review immensely, I can still dream 😌 I also love your storage carts, what a great way to switch between games types quickley. Noobi, if you and your family ever go on a long term vacation, let me know if you need a house sitter 😉😆

@NOOBIFIER1337

Жыл бұрын

Lol, no trouble. And thanks as always for the support over the years. 07

@Glorious_Kim_Jong_Un

Жыл бұрын

I assume you're young. By the time you get to your 30's, hopefully $30k isn't such a big deal. Even if you're middle class, there are people with motorbikes as a hobby that cost more than this rig and if this is one of your main hobbies, I say go for it. Just remember to aim for the stars, not settle for some low paying job. By the time you get to your 30's and this is still a financial issue, I strongly suggest reorganising your life. :)

@NOOBIFIER1337

Жыл бұрын

@@Glorious_Kim_Jong_Un thanks for that. I’m actually 50 and retired after thirty years of service in the Canadian army. I am now able to make such silly purchases for fun… wait till you see the next rig that arrives in a week or so.

@brimstone5931

Жыл бұрын

​@@Glorious_Kim_Jong_Un That was nice of you to take the time to reply. Actually I am 62, I was supposed to retire at 60 but hope to retire soon. I am fairly well off, probably better paid that most and with my work pension and veterans pension I will be very comfortable when I do retire. Thanks for your encouragement regardless. My original comment was a bit flippant, but if I was very much into simulation hardware, I think I would definitely buy the Qubic QS 220 PL & Monstertech MTS platform and I understand why it is so expensive - Quality costs. Have a great day Ma'am *bows* 🙇‍♂

Thank you so much for all of the work you put into your videos! You always go well above and beyond 😁

@NOOBIFIER1337

Жыл бұрын

Thanks very much for the support

"If you're married, and want to remain that way, this should be installed on a solid floor..." I'm now planting the seeds to buy this setup.

15:37 I like the technician they send to check the system. "Size is not the only consideration", clearly they have prepared for this with the appropriate staffing.

This was a great video. I'll probably never have something like this but it's great to see your tests on it.

I don't think I'll ever be able to have a setup like this, even if the funds were there, I don't think there will ever be a way of installing something like this in a European flat. So I am really looking forward to more videos from you about your experiences with it, especially how it works for Star Citizen.

@NOOBIFIER1337

Жыл бұрын

Thanks for the support and yes, I will always work to keep you entertained

Жыл бұрын

Sim centers are popping up all over the world. Maybe at least you can enjoy a different setup with motion there?

This was so much fun!!! Fantastic video.

Always worth my time to watch your reviews. You have saved me money in the past, steering me away from some making bad purchases and have guided me towards good purchases. Thank you @TheNOOBIFIER1337

@tvliquidGG

Жыл бұрын

not sure this one would save you money though hahaha!

Excellent video and explanation. Sets proper expectations. Education is KEY.

Noob, awesome review!! Thank you for all the hard work you do!!

@NOOBIFIER1337

Жыл бұрын

I appreciate the feedback. 07

Your rig is amazing. I would love to have one, one of these on day. The only way I'm going to get there is to build it rail by rail over time. I've already started. Going to use the seat from an actual truck though. Far more comfotable.Thanks for sharing your impressive set up.

You always do the coolest stuff! Star Citizen with motion...#LifeGoals.

My girlfriend was never into star citizen until I started getting her a wheel and started talking about building "gaming cockpits" in a few years. Thanks for this video

Amazing tech very well presented thank you 👍

Really nice setup. Having also been down this rabbit hole, totally agree with your findings (I also now use very powerful/fast actuators). Poor tracking motion can also lead to motion sickness when the motion does not quite match the seen changes in the image.

oh wow that looks like a nice sim. Next level stuff.

This is a great review. I have never really considered motion sim before now. Quick question: do you feel this obviates the need for force feedback in controllers? For flight sim, I don’t think there are any great FF options, so I am curious if you feel this can accomplish a similar effect. Thanks as always.

@NOOBIFIER1337

Жыл бұрын

Thanks very much for the support, no in reality it makes force feedback almost more important. They work together

Can't wait till they make a full motion space sim rig for star citizen or other space games

Excellent vid. I have the older MT-X setup (which I prefer -- MT-S lost some add-on things that I love about my MT-X).. But I'm in a (rental) house that has a basement, so it sounds it might not work here. Not to mention a 4-actuator system being OVER SEVEN THOUSAND DOLLARS 🤪. Yow.

Im in ore at this set up I can not see me been able to get this either cash or space / place to have one . Man don't them 55" TV's look small LOL Thanks for putting this video out it is very cool to see

@NOOBIFIER1337

Жыл бұрын

I really appreciate the support, thanks for participating and watching.

Ya sticking we front and rear transducers for now. Some rumble for front lock up, revs, gear change, and curbs. Any more it gets “muddy” doesn’t add any useful info. Thanks for testing these bank busting setups for the rest of us ha!

Hi, does the haptic feedback / vibrations can replicate things like a single wheel slipping / locking, etc? I'm on the fence between this and the Sigma DK2+

Awesome video! I'm interested in the 210 or 220 for use with helos in DCS. I'm curious though....1. will the 210 be sufficient for this application or is the 220 really needed? 2. As helicopters have a constant low vibration, is that the same on the rig or do you only get vibration on maneuvers/ aircraft stress.......I'd love a rig that has vibration as the rotor starts up and a slight vibration at all times even ground idle for the realism. Thanks again!

@NOOBIFIER1337

6 ай бұрын

I would like you to reach out to me by email or discord.

Who's the guy in the Red Hat? He likes to crash a lot I see. 😉 Serious note, I would LOVE to have a motion rig. Car racing/drag was a passion of mine in my 20s, I stopped racing semi-pro when my son was born but would love to actually feel the race again. Maybe one day. This looks amazing. Thanks for the vid Noob.

@NOOBIFIER1337

Жыл бұрын

That’s TV Liquid… a Star Citizen Twitch streamer friend who lives close. I appreciate the kind words and support. I loved going through this process to review

Top notch review Noobifier. Now... I need to buy a new house so I have space.....

@NOOBIFIER1337

Жыл бұрын

I appreciate the support, thanks

I'd love to see an example of the motion control in star citizen specifically. I assume you may have to run simtools for using joystick input to control the 3(maybe 6??)DOF because I don't think star citizen supports telemetry natively...

Love the rig man I don't want motion just good sim rig with dd1 podium as it's covers all console but what size and brand monitor are you using love ya work

@NOOBIFIER1337

Жыл бұрын

kzread.info/dash/bejne/daeLtJmOmNnWY7A.html

Is it possible to price the exact system that you have right down to the computer also including all the flight sticks and peripherals or can you provide a list of all the equipment you have? Great vid, very informative.

@NOOBIFIER1337

Жыл бұрын

Look for “ Hardware” in the description. I am a QuBIC System Importer, Distributer and offer on site install. Please let me know if you want help with your own Sim Needs. Just Email me, or use the request quote on the red Link Qubic in the description.

I have one question about your choice of screens. I've been watching all your videos relating to sim pits in close detail as I intend to make myself a pit in the near(ish) future. In another video you showed the boxes for the screens, I believe they were Sony A-80's, which had 120hz refresh iirc and I couldnt find a response time, but at best they would be 4ms. A detail I didn't know when I got my monitors together for this (3 x 32") is that nvidia will span them for you in surround, but if all three monitors are not G Sync enabled, you're new surround virtual monitor will be a 60hz monitor. If all three are g sync, it'll cap at the lowest speed of each of the three. This said, I'll move to my question. I've looked at tons of large format monitors trying to decide what the optimal solution is, and in terms of size alone, I agree with your choice of 55" if you have the room. However, no 55" screen I could find had g sync, so were you tempted to use 43" gaming monitors as g sync versions are available in that size? For future proofing if nothing else? Awesome video series btw, I love the information I'm getting from each of these videos you release on simpits! I only recently found out about the g sync vs refresh rate thing when I purchased my third monitor as free sync and it only gave me 60hz. Could you mention this consideration in one of your simpit videos so others don't find themselves in my position?

@NOOBIFIER1337

Жыл бұрын

For three screens NVIDIA is garbage. I ended up just getting rid of the 3090 and bought a 6900xt instead. No issues with Freesync

@fubarace1027

Жыл бұрын

@@NOOBIFIER1337 Wow, really?!? Does it go the other direction, ie a 6900 would run my mix of free sync and g sync at base refresh? This is another topic germane to simpits you could add to a video. I, just a day or two ago, purchased a 3090 as it came down in price $500 at a local store, and I bought a third monitor (which wasnt g sync). I guess I didnt think it through. I assumed so long as it was 1ms response time and was at least 144mhz, the quality of a monitor I intend to be an "outside" monitor didnt matter that much. My center monitor being a good one, I matched the brand (LG) and went forward. Live and learn

@NOOBIFIER1337

Жыл бұрын

@@fubarace1027 probably has more to do with your choice of wires.. if they are longer than 8 feet, they default to 60hz

Very nice and pro set up, congratz. You play with 42 " triple screen ( so more immersive and confortable than VR , for me). And what your distance from the monitor. I have a 42 "screen toot, for playing DCS, elite dangerous, ACC etc.. And i m afraid to be too close for eyes etc... I use track ir, and it need to be not too far . Distance for FOV and security eye for you?

@NOOBIFIER1337

Жыл бұрын

These are 55” and the FOV really does change based on the game title

@Olivier.Colonna-Comedien

Жыл бұрын

@@NOOBIFIER1337 oK, Thanks, oh 55".Yes for th FOV, but for distance between you and screen, to avoid eye pain? With your 55" and this set up for exemple.

Amazing review, thanks so much! Is that MSFS 2020 at 15:25? If so, I was wondering how you set it up to work with triple monitors? I was under the impression that MSFS 2020 doesn't support multiple monitors. Thanks a million.

@NOOBIFIER1337

Жыл бұрын

It supports triple. It was a total pain in the ass on Nvidia, but on the 6900xt, plug n play.

@joncarlmatthews

Жыл бұрын

@@NOOBIFIER1337 thank you

@Janzer_

Жыл бұрын

kitteh technician will help as you see in a few seconds

For a more in-depth overview look at the Qubic QS 220 PL Extended 4 Actuator System. Barry Rowland from Sim Racing Garage channel has recently uploaded his hour and half video. He goes into a very through inspection look at the build quality and set up of the Qubic QS 220 PL system. Highly recommend looking at his channel for Motion Sim Rig Racing gear reviews kzread.info/dash/bejne/i6ZntpOwdavglrQ.html

So what do you think about eracing labs RS mega series? With the thanos system?

It's only a dream, but it's a *good* dream ^_^ TY

Hi, how dose the rig feel when you do a small pitch and bank movements ? Any cogging or jittering or it's smooth ?

@NOOBIFIER1337

5 ай бұрын

None of that because of the cups

Noob, I have the racing bug. Can you do some more racing equipment evaluations? Wheel bases, etc?

Very cool

Hey noob, does Star citizen have the ability to make use of this, looks like a lot of fun for in ‘verse racing.

That is A Lot of dynamic forces on an aluminum t-slot extrusion, I really hope monster tech put the time and effort in to run FEA for endurance limit

@NOOBIFIER1337

Жыл бұрын

It’s fine. I had a 390Lb friend over the other day. They spent over 4 hours playing dirt rally 2.0 and Automobalista2 two bolts needed to be tightened a bit when that session was over, but aside from that, everything is great.

Since cheap and expensive are relative, can you share the cost for the set up shown in the video?

Looks like an homage to the StarFury from Babylon 5.

Thanks for the video. Pleas post some SC action with this rig. :)

@NOOBIFIER1337

Жыл бұрын

I will try, but SC won’t have any telemetry to actually make it move. They are already struggling to develop, I don’t expect them to make motion a priority

@marktvcturner2448

Жыл бұрын

@@NOOBIFIER1337 let's not die on ramps first. ;)

Do you think the immersion would be any different if the monitors could move with the sim; better, worse, no different?

@NOOBIFIER1337

Жыл бұрын

I believe there would need to be some post processing to assist with motions that move on a platform.

does it have yaw motion for helo/planes?

@NOOBIFIER1337

Жыл бұрын

Like a twisty motion, no.. this is why I also ordered the 6DOF system to test. It’s SUPER important that I can answer these questions properly, so I am happy to order, pay, install, test and report. I will be publishing that video as soon as it arrives this month. Please stay tuned and thank you for the question.

@horstweihrauch1

Жыл бұрын

@@NOOBIFIER1337 thank you for your service🤝

After how many flying hours in your rig does one get a helicopter license? ;-P Does SC support this system?

@NOOBIFIER1337

Жыл бұрын

SC in no way supports motion. But all of the other games I want to play do, which is fantastic. Thanks for watching

Sooo damn cool!

@NOOBIFIER1337

Жыл бұрын

Thanks, it’s really fun

nice, start training the robotech pilots of the future young! future wars will be dope.

do you find that it was worth it to buy 2 of those 45 degree pivots for your joysticks?

@NOOBIFIER1337

Жыл бұрын

They are comfortable, but you need some extra room for them to work

@rubbajhonny2690

Жыл бұрын

@@NOOBIFIER1337 thanks very much i think i have the room but im gonna try with just one for the first bit then maybe upgrade to a second one

is it possible to have motion AND bass shaker?

@NOOBIFIER1337

Жыл бұрын

Yes, however the vibration from the platform flat out OUTPERFORMS even the most powerful butt kicker. The legs can recreate any vibration such as engine vibrations, or bumps.

@horstweihrauch1

Жыл бұрын

@@NOOBIFIER1337 ooof. i start saving money :o

What is the pricefor "one complete rig"? Would i need to sell just my car or a whole house? :)

@NOOBIFIER1337

Жыл бұрын

Well, if you included the OLED screens, the controllers, the PC and everything, it might be as high as Fifty Kay?

@Tostotoktedasij

Жыл бұрын

@@NOOBIFIER1337 Very impressive, thx

@lordfraybin

Жыл бұрын

Sell the car. You're going to need the house.

@Tostotoktedasij

Жыл бұрын

@@lordfraybin Car is not enough tho :D

That cheap not so good motion rig mentioned looks like a Prosimu rig. I thought they make decent stuff?

@NOOBIFIER1337

Жыл бұрын

As I said, it seems “fine” until you try something better, then all of the flaws come out. They need to drastically update their product line

Just wondering why you chose this over the something cheaper like the PT Actuator or the RS Mega Plus. The specs look better on them also.

@NOOBIFIER1337

Жыл бұрын

I had a look, The PT Actuator is $12k.. and reviews state that its super loud. No thanks, I am super happy

@varpornrat

Жыл бұрын

@@NOOBIFIER1337 but your getting the 6DOF from them which is astronomical expensive?

@NOOBIFIER1337

Жыл бұрын

@@varpornrat I mean, perhaps its not that expensive based on how much I make per year, Right? Perhaps $50,000 is no different than buying a coffee for me.

@varpornrat

Жыл бұрын

@@NOOBIFIER1337 Don’t know what you really mean by that comment but I’m assuming it means $50k is really not expensive for you. That’s fines but your first comment sounds like $12k was out of your range.

@NOOBIFIER1337

Жыл бұрын

@@varpornrat if I have bought a 3DOF and a 6DOF for my studio, I’m not worried about the price. The others are overpriced for what you get compared to QuBIC.

I know your review is concentrating on the the user experience, but would be good to understand that a setup like yours would cost a small mortgage or price of a car, or a deposit to a small house?

@NOOBIFIER1337

Жыл бұрын

Yes, unfortunately this is always the way of things.. Just like cars or Houses… some are in budget, and others are simply not. I do appreciate you watching the video.

I've been all over their USA website and yet to find a single thing that doesn't say "This item ships from our HQ in Hannover, Germany with DHL Express". No seats, no rails. Looks like Fall, fell. Beginning Winter this month so maybe they just haven't updated their website. I'm only 4 hours from Tampa so I still hold my breathe, because I will never do DHL again. Four out of my last four experiences with them were disasters. As for the extended frames, I don't see those yet but also remain hopeful. I was going to get the D-Box setup soon as they drop their latest gen in a 6" version so am very used to holding my breath, haha. I would buy the base package tonight if Tampa had it, and it was the futured extended frame since I will most certainly be doing motion (though I'll still most likely go with the D-Box 6"). All my wanted toys are only future wishes. If you're reading Monstertech,,, HURRY UP!!! Haha, jk,,, but seriously,,, hurry up. Great video! I always watch from start to finish, and normally more than once.

@NOOBIFIER1337

Жыл бұрын

Just drive and go pick it up

@MrTurbine777

Жыл бұрын

You must have missed it when I said they don't have anything.

@NOOBIFIER1337

Жыл бұрын

@@MrTurbine777 they do, they are just not shipping

@MrTurbine777

Жыл бұрын

8 hours round trip on faith that they might have what I want? Haha, no tyvm. Should they design a website to show what they have in stock, then maybe I'll toss a friend a few bucks to make the trip, sure.

@MrTurbine777

Жыл бұрын

@@NOOBIFIER1337 Well, as I mentioned on one of your other videos, I work too much, so not much time for the next couple of months at least, plus I intend to build two systems for coop flight and racing with friends, so I still will be looking forward to all I mentioned above for my own motion rig, but to get started to help me plan more to come, I went ahead and ordered their base kit a few minutes ago. I hope you get some sort of kickback. Your code worked and I saved fifty bucks! Thanks! :)

Would this work for flying a ship in star citizen?

@NOOBIFIER1337

11 ай бұрын

Yup

Welp, I love the concept of 4DOF/6DOF motion simulator systems, but the thing I'm most worried about isn't even the asking price to buy it, but rather the, I assume, ginormous energy demand of such a setup, especially when used daily... these days, that'd probably run you thousands of euros per year, if the consumption is anywhere near what I dread it to be...

@NOOBIFIER1337

Жыл бұрын

Actually, and practice it’s a lot lighter to operate than we thought.

I heard is sunny outside...

@NOOBIFIER1337

Жыл бұрын

It can be sunny inside too

I am just wondering is it worth it for SC?

@NOOBIFIER1337

Жыл бұрын

SC does not support VR or Motion.

@Tony_M_

Жыл бұрын

@@NOOBIFIER1337 yea I’ve seen that now… hopefully in the future it will support motion. I wish to have the same set up as you and add the simpit avenger pro esports 👍

Does it work with star citizen or il2 etc?

@NOOBIFIER1337

Жыл бұрын

It does not work with SC because the developers have not worked to add any sort of external telemetry stream.

@totallylegit4092

Жыл бұрын

@@NOOBIFIER1337 ah I see. Does it work with any flight sims at all? How about VR?

@totallylegit4092

Жыл бұрын

Sorry for badgering you with these questions. I just dont see anything on their website regarding this.

@NOOBIFIER1337

Жыл бұрын

@@totallylegit4092 of course. In the video I am actually playing DCS and MSFS.. it works well with VR as well. Go look on the second channel “ Noobifier Two “ I have VR content there

How does this compare to the Dbox and Sigma DK systems?

@NOOBIFIER1337

2 ай бұрын

This has 4x more velocity and 4x more range of actuator

@Danny-fc2je

2 ай бұрын

As far as the haptics, is it as strong as the Dbox? I’m guessing you prefer this system over the Dbox for sure yes?

@NOOBIFIER1337

2 ай бұрын

@@Danny-fc2je I actually own a full set of DBOX G5 on a rig and there is no comparison. DBOX are overpriced.

@Danny-fc2je

2 ай бұрын

That’s exactly the straight answer I wanted to hear!!! Thx man… so now…. QS-210 or 220?

@NOOBIFIER1337

2 ай бұрын

@@Danny-fc2je if you live in USA or Canada, contact me by email, we can discuss

Grear vid. I think #NoBS could do with a hyphon btw

10k? in this economy... I mean if you have the money and want it go get it but sadly most of us can't.

@NOOBIFIER1337

Жыл бұрын

It’s replacement arrived this week.. (link included) it was $42,000 .. the 3DOF one is meant for guests when the come over, and was meant to be used during the 6 Month delivery for the new one. kzread.info/dash/bejne/dW2Zl7eGXZquZZM.html

they say transducers are all you need

@NOOBIFIER1337

3 ай бұрын

“They” are incorrect.

Why didnt you go with Honeycomb since clearly money is no option to you...?

@NOOBIFIER1337

Жыл бұрын

They never replied

what about price??

@NOOBIFIER1337

Жыл бұрын

It depends on where you live

If I ever can afford to throw money away in the hope of winning the lottery and then go on to win a few, I'll let you know what I think.

Ahhhhhh! He used “gold standard” Dam you CR!

@NOOBIFIER1337

Жыл бұрын

Lol. It’s Chris yes, but I think that term is universal in the industry

But can it play Crysis

@NOOBIFIER1337

Жыл бұрын

Of course. It’s a 16Core AMD and a 6900xt

@topojost

Жыл бұрын

@@NOOBIFIER1337 lol on a more serious note, is there any telemetry software for motion in Star Citizen? Will CIG be offering any support for it eventually?

the first one is cheap motion and looks like shit but that 2nd machine looks fucking awesome and would be a blast. I am sure there are better but that thing starts to get to the world of decent motion. There was a 360 degree cokpit on display I saw that obviously would not be sufficient to simulate a modern or high end prop fighter due to simple safety and mechanical limitations but would simulate more relaxed/civilian planes super well. Some day if government stops waring us and taxing us to death we will reach that point :D

13k is insane....

@NOOBIFIER1337

11 ай бұрын

kzread.info/dash/bejne/kYeJxsqjgbSeddI.html

@TheNOOBIFIER1337 I have a bad feeling that my bank account is going to be hurt real soon...

@NOOBIFIER1337

Жыл бұрын

I am sorry.

@theque2100

Жыл бұрын

@@NOOBIFIER1337 But are you though lol

@NOOBIFIER1337

Жыл бұрын

@@theque2100 you will love it