I hate clickbait as much as the next guy, but this WILL NOT disappoint. The car is SO much better looking on the new rollers. Thumbs up if you agree!!

@dachurl87

3 жыл бұрын

I think the black rims look better on the vette.

@Greenlightfilming

3 жыл бұрын

You arent the first person to say that. I'll be putting the black wheels back on it for sure

@abbas674

3 жыл бұрын

What size are the fronts.

@bdunn14

3 жыл бұрын

@Morning star Garage Factory by far are the best but these don't look too bad.

@theforerunners5171

3 жыл бұрын

What size are the tires?

It’s really hard to find a smaller car channel that doesn’t just focus on making everything turbo drag car. This is a great channel with great editing. Also both dream cars lol. I have the WS6 but haven’t gotten a C6Z. That one is next

@Greenlightfilming

3 жыл бұрын

Hey thanks! that's very kind of you to say, I appreciate it. The C6Z was great. Totally awesome car.

I made the jump to 18" wheels several years ago and like yours, it changed the attitude of the look 100%. Very nice.

@Greenlightfilming

3 жыл бұрын

18"s really are the way to go on these. If a guy is on the 17/18 fence just go 18.

Gorgeous Trans Am and awesome wheels.

Looks great man!

@Greenlightfilming

3 жыл бұрын

Thanks man. It's a killer setup

Looks amazing on yours. The pewter color with the welds is perfect. I like the look of my old style weld draglites on my black ws6. The full polished aluminum looks good against the fully black paint

@Greenlightfilming

3 жыл бұрын

Thanks man, I agree it's a killer look. Pewter isnt my top pick for color, but the wheels really set it off!

Enjoyed that fbody! Well done.

Wow nice choice, great wheels on the TA captain!

@Greenlightfilming

3 жыл бұрын

Thanks man, hard to pick a better wheel than these.

Awesome vid man those rts are sick New sub

@Greenlightfilming

3 жыл бұрын

Sweet, thanks man! Appreciate it

Great job my guy

Wow !! Perfect wheel combo 👍

@Greenlightfilming

3 жыл бұрын

Thanks man, appreciate it! Weld makes great wheels

Love em! They’re the ones I’m saving for. Congratulations 👍

@Greenlightfilming

3 жыл бұрын

Its worth it for sure! This is the best mod I've done to the car yet.

@keilylmm6377

3 жыл бұрын

@@Greenlightfilming hi my friend it's Keith with the project 94 Pontiac Trans am. Can you message me the backspacing on front and rear of them weld rims. But I'm going to be sticking with 17" rims for my bird.. 17x9.50 front and 17x11 in rear..

You did good. Congrats!

@Greenlightfilming

3 жыл бұрын

Thanks man, appreciate it!

Ohhh brother!!!!!! That is sick!!!!!! They really Change the attitude of the car!!! You hit a home run with this one. Where you able to leave the garage that first night?? Lol🤣😂🤣

@Greenlightfilming

3 жыл бұрын

Haha yeah I had a hard time leaving it that night. What a major change on the car!

TA looking hot!! Congrats!

@Greenlightfilming

3 жыл бұрын

Thanks bud

Looks awesome perfect backspacing on all four corners.. keep on rocking that TA, very few in that good of a shape out there these days

@Greenlightfilming

3 жыл бұрын

Got that right man. The wheel setup is perfect fitment on these cars. Thinking I'll have the car for the long haul!

Looks totally awesome on it !!

@Greenlightfilming

3 жыл бұрын

Thanks bud. I love it!

That looks perfect!

Perfect look. Your car is sweet but those wheels totally do it justice!

@Greenlightfilming

3 жыл бұрын

Thanks bud, loving them still!!!

Looks sick man.

@Greenlightfilming

3 жыл бұрын

Thanks, it's the wheels! They make any turd look good lol

The new rims/tires look great!

@Greenlightfilming

3 жыл бұрын

Thanks bud

New sub, looks great man.

@Greenlightfilming

3 жыл бұрын

Thanks man, appreciate it!

Can't go wrong with this setup. Nice fbody bro.

@Greenlightfilming

3 жыл бұрын

It's been do many times, but it sure looks good lol. Thanks for checking out the video man!

Nailed it!

@Greenlightfilming

3 жыл бұрын

Thanks man

Awesome bro!

@Greenlightfilming

3 жыл бұрын

Thanks man the wheels are killer!

looks awesome love that wheel

@Greenlightfilming

3 жыл бұрын

You and me both bud lol

That looks really nice! Beautiful setup!

@Greenlightfilming

3 жыл бұрын

Thanks bud!

@joe00camaross

3 жыл бұрын

@@Greenlightfilming off topic but do you like your Borla cat back? I have a 00 SS with BTR cam, trick flow heads, LS6 intake and ARH LT’s going through SLP CME but would like a little more aggressive sound. Your car sounds great!

@Greenlightfilming

3 жыл бұрын

I like it, yes. It is a little loud on the highway but it sounds really good.

Awesome upgrade 🤟

@Greenlightfilming

3 жыл бұрын

Thanks bud!

Normally I'm not easily impressed by wheels, but holy crap I'm sitting here acting the same way you are in the video. Over here acting like I just put new wheels on my car the way I'm fanboying right now. And I never really care for chrome at all. They set your car off though

@Greenlightfilming

Жыл бұрын

I'm still a big fan. They are a killer wheel on these cars.

Looking good!

@Greenlightfilming

3 жыл бұрын

Thanks!

Those look so awesome. Well done on the trade-up. I keep looking for a used set for my CETA. They really would modernize it, but keep the same style with the chrome lip on black. I just don’t really want to bite the bullet on a new set... lol.

@Greenlightfilming

3 жыл бұрын

Agreed man, and I was in same boat. I would have never bought them new. Way too much $$$. Keep your eyes peeled. Used sets are out there!

Beautiful setup Great video Dialing in wheel/suspension can be a chore

@Greenlightfilming

Жыл бұрын

Absolutely. These wheels/fitment are perfect on a lowered fbody

My `99 with 390,000. miles on the clock still has the factory 16"s. I've been on the fence about what to do on my soon to be next set of tires. After seeing this I'm definitely going staggered with some 17" 275s up from and 17" 315s in the rear. Just want to make sure to get the offset right! Thanks for the video!

@Greenlightfilming

Жыл бұрын

Sweet, thanks for checking the video out. Good luck on your wheel search! You have a MOUNTAIN of miles on your '99 ha

Looks great!!! Thanks for sharing. Now I want to change the direction I was going in. Just to verify and my apologies if you’ve mentioned this already, did you roll the rear fenders or do any fitment mods for the rear wheels? Thanks !!

Great job, looks Sick man, I Personally like the f-body better, I have a 95 Trans Am myself that I really enjoy driving as well as wrenching on and making it faster!! New sub for sure!!

@Greenlightfilming

3 жыл бұрын

If I had to keep one car out of all of them it would be the Fbody, hands down. Thanks for the sub. I appreciate it!! Good luck with your TA.

Soooo dope!

Love the ws6, it’s why I joined the channel😁

@Greenlightfilming

3 жыл бұрын

Thanks for the input. The car still has a home here

@brettbrannon4775

3 жыл бұрын

GreenLightFilming well hopefully she with u and this channel for years to come😁

They are beautiful, night and day!

@Greenlightfilming

3 жыл бұрын

Thanks man, it's a huge upgrade!

Nice wheels i love the way it looks that's my dream car maybe one day i will have one.

@Greenlightfilming

3 жыл бұрын

Trans Am's/Z28's are pretty affordable man. You can even finance them if need be! Could be in one for a couple hundred bucks a month of you wanted to and can swing it.

Very Nice Wheel choice Dayummmm !! Don't take them off the T/A . I'll bet that was a fun ride , Love that car !

@Greenlightfilming

3 жыл бұрын

Sure was a fun ride. I had to try them on the Z for a few days. Interesting look but I'm swapping the fronts back

Your new wheels or bad ass that looks 👌 really good 👍

@Greenlightfilming

3 жыл бұрын

Thanks bud! Weld makes killer wheels

Dude I just blew my load. LOL. What a stunner. You are right, these are the best looking wheel on a f body. You are lucky to get a deal like that. It would be hard to afford a brand new set with tires. And Im so glad you keep putting out WS6 content. I just love it. I have a couple of questions for you. What size of a restrictor are you running in your Borla muffler?? I just installed one on my 2002 and I have it wide open and its nasty loud. And If you don't mind me asking, what did the seller of the rims asking before your deal with him. I do have a eye on set of rims, and would like to know for comparison. Thanx bud.

9:08 I noticed how close the wheel and tire is to the back part of the fender, how many inches is that gap? Because i kinda have some regular street tires on my F-body that the dealership threw on, (which are 235 width, 60 aspec ration and 16in rim) and I have about an inch of room and I'm not sure if I should consider getting 17 or 18 inch rims. Because I want to try to get decent fitment without having to realign too many things if possible (Also sorry if I speak weirdly or unclearly, I'm all new to wheel fitment and all)

T/A looks sick with those Weld wheels.

@Greenlightfilming

3 жыл бұрын

For sure. Hard to beat this wheel combo on an f-body

What is the actual full dimensions on your s71 wheel front & rear 18x? Front 18x? Rear & what is the back space on front & rear wheels? Thank you

I found a pair of 18 ×10.5 weld S 71 with a 7.6" back space high pad. Will the rear wheels have the same look as yours?

Nice!

@Greenlightfilming

3 жыл бұрын

Thanks!

WOW looks tremendous! Paused at 3:51 !

Can you please tell me what you have for shocks struts and springs? I’ve got the same wheels and car and having a tough time finding what’s perfect for a drop…same exact offsets as you have. I’ve watched more than a few of ur videos in the last few days and I just can’t find it…is it Strano springs with koni front struts and rear shocks? Assuming there only one set of springs he sells? Thanks man. Just wanna get the right stance on it.

Cool!)

Your right Those rims update the car 20 year ... love the look

@Greenlightfilming

3 жыл бұрын

Thanks bud, appreciate it!

It’s also the colors. The chrome and black of the wheels pairs SO WELL with the black and grayish color of the body of the car.

I like the black wheels better on the Vette. And the Weld wheels look AWESOME on your TA

Awesome wheels man, congrats!! Those are my favorite wheels for a Trans Am. Hey, when you re-center your rear with the panhard bar will you make a video on how to do it? There seems to be no videos are instructions out there on how to do this.

@Greenlightfilming

3 жыл бұрын

Sure, I'll make sure to at least add it into another video if I dont make one just about it.

@transam4555

3 жыл бұрын

kzread.info/dash/bejne/qWye0ddrdKrOlc4.html

@transam4555

3 жыл бұрын

I love those wheels and now that you put those on that pewter gray Trans Am I think that I'll go that route, have the same car as yours, automatic though

Those look sick, def worth the $$

@bhcamaro2002

3 жыл бұрын

Knew a guy that had them. He bought them new for $2200 😲

Would this fitment clear some brembos? 4 piston

You said re align the rear a bit--I dont understand---is it now off center? How did you do it? My WS6 w wide tires keep slashing the inside of the tires on the bump stop pads.

Nice man 👍 This wheels fit like a gloves 😎 Have you spacers on?

@Greenlightfilming

3 жыл бұрын

No spacers needed

Those rims are sweet on both cars.

@Greenlightfilming

3 жыл бұрын

Thanks bud. They are hard to beat

I see fbody... I sub

i run prostar chromes on my 95, 15x10 in the rear and 15x7 up front. More of a muscle car/ drag look and I love it

@Greenlightfilming

3 жыл бұрын

Very popular look. Can fit a lot more sidewall under the back! I dig it.

@alicehowington3526

3 жыл бұрын

what BS to you have on the rear, also tire size?

I have Camaro wheels that has 245/45/16 tires and I’m using the Camaro wheels on a 97 firebird. Do you know how wide a tire I can go with the 16 inch wheels?

What are the wheel and tire specs and will they fit a stock car?

Do you think 295s on 18x10s would fit the rear without clearance issues? I want a square setup wider than 275s and hopefully with 18" wheels.

@Steven-rg4bo

3 жыл бұрын

I’ve ran 18x10 square with 295s. Front rubs slightly at full lock. Rears fit fine I rolled the back to be safe.

Very nice...

@Greenlightfilming

3 жыл бұрын

Thanks a lot

I have a set of holding commodores on my 97 formula 19 inch.Never saw another pair just continued in two thousand eighteen

Those wheels really do look killer on the chicken... Randy please let us know if the tires rub on the fender wells... Lol... You can't stop staring at your car can ya😄

@Greenlightfilming

3 жыл бұрын

No rubbing so far! Glad to be able to report that lol.

I like those wheels

Those wheels look sweet especially with the color of the car. I have an 2002 black ws6, and personally I think I want the Miro 111 wheels, i just love the black on black look. If you haven't see the roads unraveled video titled "brutal 500 hp trans am ws6" it's a sweet car, basically everything I want to do to mine eventually

@Greenlightfilming

3 жыл бұрын

I've seen that video probably 100 times lol. Legendary fbody stuff there, it's great. 500hp would be a good number to hit in an fbody.

@peterfenter8800

3 жыл бұрын

@@Greenlightfilming I'm at 400hp to the wheels right now with a texas speed 228r cam, and headers and exhaust. I think my next thing is going to be heads, and a rear end... I think I'm loosing some hp in the driveline, it's still stock, and there is quite a bit of play

@greenlight I watched the whole video. Did I miss the backspace info for front and rear?

@Greenlightfilming

2 жыл бұрын

Watch at 02:00

Quick question! If I put on 18 rims and lower my TA with BMR springs 1.25 inch. Do you think they might rub? Side note it’s at stock ride height now with 18’.

@Greenlightfilming

2 жыл бұрын

I wouldn't think so. You may have to clear your bump stops and the offset is important. Lots of info on ls1tech regarding fitment.

Any idea if you could run a square set up? So basically 11 wide all around

@Greenlightfilming

3 жыл бұрын

Not sure. Might be tough on the front end, I'd guess they might rub.

Would that wheel setup fit for a stock 10 bolt 2002 f body camaro? Or is it too big

@Greenlightfilming

3 жыл бұрын

It should. The axle housing is the same width on this car.

What a beauty and my favorite color too. A little to loud for my liking.

Wow!!!

I came across this video while looking for a car the same color as mine. I'm torn between the 71's and the 77's right now. I to have torque thrusts on my car currently :D not only am i torn between the two wheels but your video now makes me torn between going up to a 18" wheel or stay 17" Also noticed your a fellow wisconsinite! Badass car love the color tho i am biased :)

@Greenlightfilming

Жыл бұрын

It's a tough call man, hate to tell you ha. They will both look good at the end of the day. You should ask yourself if you want more function, or form. Choose your size accordingly.

@dslilws6

Жыл бұрын

@@Greenlightfilming agreed I’ve got some time before I’ll have some extra funds for wheels but the choice is difficult 😆

Weld RTS is the modern day TTII. Everyone has them and they look great.

@Greenlightfilming

3 жыл бұрын

I agree 100%. Hopefully they stand the test of time like the TT2's. I think they will.

I just bought a ws6 and love the wheel set up you got I was wondering if you could tell me the specs on them so I could order a set. Thanks I enjoy the channel.

@MrBrandonLane

Жыл бұрын

I know they are 18x10 and 18x11 but like med or high pad height and back spacing. Thanks again

You think with the front wheel would rub if you do the brembo 4 piston brake upgrade on the T/A thanks for any of your info.

@Greenlightfilming

3 жыл бұрын

I wouldn't be sure either way. Still have the stock brakes on my car. There's a bit of room, but I'd hate to guess either way!

@phillipjaques4640

3 жыл бұрын

@@Greenlightfilming appreciate the info man thanks.

@phillipjaques4640

2 жыл бұрын

Hey bud I wanted to ask you if you torqued the wheels and what was the spec? Thanks

TA LOOKS AWESOME!!!!!!!! I have a 1998 TA Looking for a set of wheels. I agree welds are a lot of money and cosmis are a nice wheel too At a cheaper cost. So your running 295/30/18 front/315/30/18 rear. You said the fronts are 18x10 front but never said the rear I am assuming 18x11 rear??. What is your offset on front and rear?. I heard 888 are extremely hard to find now since the summer is coming around. 888 are the best in reviews out there But nitto 555 are pretty good also. Thanks man

@michaelleto6418

3 жыл бұрын

I just seen your offsets Thanks again

@Greenlightfilming

3 жыл бұрын

Good deal, glad you found the info good luck on your search for your TA

Car looks awesome!! Do you think it would have any rubbing issues if you had like Eibach pro kit springs?

@Greenlightfilming

3 жыл бұрын

Not too sure to be honest. If the spring rates and drop is similar I'd presume not.

@derekperkins4141

3 жыл бұрын

@@Greenlightfilming cool thank you .. how much of a drop does you’re car have ?

Just got a WS6 and looking to do the same wheel setup on my car. How much is your car lowered if you don’t mind me asking. Mine is 1” lower from stock

@Greenlightfilming

3 жыл бұрын

It has a Summit Racing lowering spring kit. Think its 1" to 1.25".

Looks so good! What size tires Did you use? F.body greetings from a Z28-druver in Sweden!

Whats offset? And its an 18x10 18x11?

I just asked you for this info...and I just found it. 😂

@Greenlightfilming

3 жыл бұрын

Good deal 👍

I didn’t hear if you said the new tire sizes for the the new wheels. Thanks

@Greenlightfilming

2 жыл бұрын

I believe it's at 02:00 in the video

Im sure you get asked this question often but what type of exhaust do you have on that beauty?

@Greenlightfilming

3 жыл бұрын

Speed Engineering Longtubes & Offroad Y-Pipe into a Borla Catback

Man I got a pewter ws6 as well and was thinking about selling it but man it looks way better with those wheels on it. I may just have to keep it now and get the welds.

@Greenlightfilming

2 жыл бұрын

The wheels really make the car. Love the S71's on an fbody.

@farhanfarooqi7190

2 жыл бұрын

@@Greenlightfilming idk if you saw but Weld came out with non forged ones called the Ventura and Laguna. The Ventura look like a copy of the s71. I'm thinking about getting those. Half the price it seems. I'm liking the 18" look for the street. I'm wanting to do a 18x10.5 all around. I like the square setup look. What size and offset are your welds?

Perfect wheels on these cars. I need to hit the lottery to afford these wheels. By the time I get around to buying them, the price will increase another $50/rim lol

@Greenlightfilming

3 жыл бұрын

Haha I hear you. People that can pick these up new are ballin out. Whew $$$

Beautiful car! I looked through all the comments to see if someone has answered this question but no luck! Is your rear end narrowed or stock length of the original 10bolt?

@Greenlightfilming

2 жыл бұрын

It's the stock length. Should be identical to a 10 bolt

@z8marro

2 жыл бұрын

Thanks appreciate it

I might have missed it but what are the wheel sizes and offset? I know the front are 18x10 but that’s all I gathered from the video. Car looks great BTW

@Greenlightfilming

2 жыл бұрын

It's in the video at 02:00

Just fucking amazing looks good bro fucking good

@Greenlightfilming

3 жыл бұрын

Thanks man! I'm loving it so far

What are the back spacing specs for future reference

@Greenlightfilming

3 жыл бұрын

Everything you should need to know is here: Fronts: 18x10 - High Pad +41mm - 7.1" Backspace - Toyo R888 295/30/18 Rears: 18x11 - Medium Pad +43mm - 7.7" Backspace - Toyo R888 315/30/18

@maldo72

3 жыл бұрын

@@Greenlightfilming awesome thank you....

@Greenlightfilming

3 жыл бұрын

@@maldo72 no problem bud

I liked the torque thrusts

@Greenlightfilming

3 жыл бұрын

I get it, they were good looking wheels that suited the car. Wanted to change things up

What are the tire sizes for front and back?

@Greenlightfilming

3 жыл бұрын

295 40 18 wide fronts & 315 35 18 rears if I recall. It's in the video.

What are the rim and wheel specs? Love the videos btw. I haven been under a quarantine and I've been bing watching your videos.

@Greenlightfilming

3 жыл бұрын

Thanks for checking out the videos, appreciate it! The specs are in the video... lol.

you think to get all 4 at 18x10 would still look good, i like the idea of rotating my tires, thanks

@Greenlightfilming

3 жыл бұрын

I think it would look good. You are only talking about a difference of a 1/2 inch on each side of the wheel. It would be noticeable up close but not from afar. If you are wanting to be able to rotate you tires that's what you'll have to do anyways.

@mikeb6902

3 жыл бұрын

@@Greenlightfilming really love the look of those wheels

What exhaust do you have on it? Sounds good!

@Greenlightfilming

2 жыл бұрын

Speed Engineering longtubes/y-pipe into a Borla catback

I hear piston slap when you first started it to back it out lol. Mine does the same damn annoying thing

@Greenlightfilming

3 жыл бұрын

Lol yep, mine does it for a short time. That and 100 exhaust leaks lol

@matthewstansbury3047

3 жыл бұрын

GreenLightFilming mine does it for a few minutes in the summer. But it sounds pretty horrible when it’s doing it lol. Between that and my exhaust leaks it sounds like I done spun a rod and stuffed a lifter when I first start it lol. From my xp the Mobil 1 0w-40 seems to get it a little quieter. The big cam and valve train it’s hard to really get it quiet. Then on top of it I have morel lifters and they are a little noisey. Good thing my Borla is loud lmao. Love your vids of the ws6.

Whats the back spacing for the rims?

@Greenlightfilming

2 жыл бұрын

It's in the video at 02:00