✅✅ Curso Marcenaria para Iniciantes em Casa: 100% Vídeos Aulas. Com aulas divididas em módulos para facilitar seu aprendizado! Descubra como Ganhar DINHEIRO em casa! ➡➡ go.hotmart.com/J74247773U

@antoniofernandez7577

Жыл бұрын

😅'

@AbdulSattar-rf6qt

3 ай бұрын

❤❤❤

I realize a lot of people will comment negatively about such things as technic but I think the video is really about showing the potential for using dowels to make a simple 45 joint very strong. I enjoyed the video and the concept. Thank you Sir.

@robertoporto9621

5 ай бұрын

la tecnica es muy buena y queda hermoso , pero cometes un error , al poner cola en los tarugos o varillas, si observas cuando van entrando la cola queda afuera, por lo tanto no queda bien encolado ,la cola la debes poner en los agujeros y de esa manera al ir metiendo las varillas la van arrastrando a lo largo de todo el agujero y asi te queda todo encolado

@johnnycorn7225

2 ай бұрын

I use this technique on my speaker boxes that need to be the strongest for very high power applications. It's the best, and easiest while saving money on no ugly metal fasteners. Plus reduces weight and shipping costs too!

@johnnycorn7225

2 ай бұрын

Y es mucha mas bella que tornillos de metal tambien, y mas fuerte! Me encanta

@stevenschiffel4294

Ай бұрын

I understand the concept of this video as many people do not have the sophisticated tools to achieve such an outcome. Thanks for an informative video. Perfect corner!

Appears to Me this video was to help the viewers to conceptualize a process to strengthen mitered corners from the days of old, but not to give exacting details as to the process. Great job and easy to understand. Keep in the good work.

Before closing the mitered ends together, I apply tape over the tops of the miter so that the two parts are held close together as I close the joint.

Very useful for me. I don't have many tools to use for my project, and have been struggling to find a joining solution for an angle. I'm very happy to know I can use a drill and bandsaw to achieve this.

Dowels should have been run through a pair of vice grips first to groove them out for better glue retention instead of scraping it off at the beginning of the hole

@davidhouston2277

Жыл бұрын

I agree but the dowels are in tightly enough that they are not dependent on the glue to stay in.

Sensacional! Gratidão 🌈🤗.

Abgesehen von den stumpfen Sägen und den Ausrissen an den Bohrlöchern sehr schön! 😉

Magnífico trabalho Will!!!

WOW! using a mitre cut block to angle your cuts! GENIUS!! TYTY!

That is surely a strong and beautiful mitre joint.

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching 😉👍🙏

Interesting how a "for beginners" video attracted so many experts willing to share their superior techniques. My bookcase needed a corner tightened. Now I know a better way.

@benjaminthomas2626

Жыл бұрын

Lol spot on 😄

@whispering-nature

Жыл бұрын

I am sorry, this is video is borderline BS, and I am extremely noob. If it's about the concept of miter joint with dowels, then the thumbnail alone is good enough to know what to do. Anybody who wants to learn mitre joint with dowels from this video, will only be misled. Video shows mitre cut with a pull saw, but doesn't show how the mitre is matched. Any inexperienced woodworker will find out that their mitres aren’t aligning if they follow this. Video shows glue is applied to the miter but doesn't show how they are held together with applied force. No master of woodcraft will ever glue their joint without ever reinforcing it. Video shows finnish is applied yet mitre gaps aren't sealed with wood powder and glue.

@danielwilliams7426

4 ай бұрын

This isn’t for beginners

That is genius and an art!! Thanks for sharing.

An excellent informative video, thanks.

That's awesome. Done with the most basic of tools!

Looks good

I think you should have the dowels a little further from the edge, just missing the inside . Use a sacrifice block clamped over where the drill exit holes will be to cut down on tear out.

@WillWoodDiywoodworking

Жыл бұрын

Hello. Thanks for watching and leaving your comment. Be always welcome.

@rosc2022

Жыл бұрын

I thought I saw him use a block where the drill bit came out (4:20)

@Elsureel

Жыл бұрын

@@rosc2022 yeah, but holding it by hand didn't prevent any of the tear out, it needed to be clamped.

@theobserver9849

Жыл бұрын

Good additional comment to an excellent video I was thinking the same thing.

@sawdustcrypto3987

3 ай бұрын

Disagree on your suggestion for placement. Right through the middle of the 45 cut will make for the all-around strongest joint. If you are mostly worried about stress pushing the joint towards an obtuse angle then yes, your suggestion would be better. But you would be sacrificing strength in the other direction- it would weaken the joint for stresses pushing the joint towards an acute angle. Two pegs toward the edge and two toward the center would be best if strength of the joint was the primary concern

Great video, the old methods are still the best!

Absolutely brilliant work

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching my friend 😉👍🙏

Great idea Ill keep that in the back of my mind for a futur build

I don't know but it looks like most all of the glue is being scraped off of the dowel, while pounding it in. I would have scraped veins in the part that will be in the wood ( not showing ) and have some of the glue stay in these scraped vein.

@moistfart9569

Жыл бұрын

Wood glue is super strong usually the wood will break first before the glued joint

@davidcurtis5398

Жыл бұрын

@@moistfart9569 And how does this apply to what I stated??? Of course the wood will break before the glue line but that is not in any way what I STATED. Read the comment before you reply!!!

@rhandley1000

Жыл бұрын

I agree. I would have sanded the dowels a bit, just to create a little more room for glue. It does need a little body to gain strength.

@moistfart9569

Жыл бұрын

@@rhandley1000 any more glue will be visible when sanding down since the purpose of joints like these is to give an illusion it is just wood and nothing else but all of you are clearly woodworking professionals

@rhandley1000

Жыл бұрын

@@moistfart9569 That is an excellent point, which is why I save my sawdust amigo ;) And yes, I am a professional - Maple Creek Woodworking, Baroda, MI. Didn't know it was that obvious....

That saw was as blunt as a cricket bat I could have ridden to London on it.

I saw trimmer processing on the ceiling for the first time, I could see the goodness of the indirect lighting. Have a nice day.

Skil yang luar biasa,,, sukses selalu kawan👍

@WillWoodDiywoodworking

Жыл бұрын

Hello. Terima kasih kerana menonton dan meninggalkan komen anda. Sentiasa dialu-alukan.

Beautiful work! Thank you.

@WillWoodDiywoodworking

Жыл бұрын

Thank you for watching and leaving your comment 😉👍🙏

Loved this video!!! Beautiful wood as well, what type are the boards?

This is a nice video and good techniques - except it looks like a lot of glue got stripped away and didn’t make it into the hole. I think it’d be better to swab some glue into those holes with a toothpick or a straw before the dowel.

@WillWoodDiywoodworking

Жыл бұрын

thanks for watching and leaving your comment 😉👍🙏🙏

@oldbearnews

Ай бұрын

Yeah - thought the same - that's what i would have done!

Nice tear out. Keep practicing.

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching 😉👍🙏

Im sorry you have so many negative comment's to this. I just subbed you because i was mesmerised watching😊 Well done

Gracias es correcto entiendo el mecanismo que el maestro explica excelente técnica acabado muy bien se ve formal y se aprecia lo bonito de ka madera, felicidades gracias por compartir sus videos mis respetos y admiración para los carpinteros, saludos bendiciones desde México,😊

so for anyone trying to actually use this, here's some tips: use a sharp saw. if you dont have one, leave a little bit of room and use a chisel to get to your line. dull saws will leave tearout at the fine edge of the miter. DO NOT handsand the gluing surface of the miter cut. all you're doing is rounding edges that will produce gaps in the glue joint, and it will not flatten the surface (much more likely to dome the surface). use a rigid block to attach the sandpaper to (make sure it's truly flat, and be careful around the edges, dont roll over them), or better yet, use some type of straight, edged tool (chisel, plane - go with the grain rather than cutting across it). clamp the sacrifice block at the exit of the drilled hole, rather than holding it by hand. this will reduce that awful tearout on the exit hole. grooving the dowels can help get glue in the joint, but you can also apply a thin layer of glue to both surfaces (inside of the hole, and the dowel). woodglue doesn't like gaps, so i'd go for minimally grooved or not at all, personally. putting glue on both glued surfaces should always be done when woodworking, as wood can absorb some of the glue and starve the joint. rather than slathering on one piece, a nice thin layer on both is much better. a prettier way to strengthen the joint using dowels is to hide them. you measure and drill the holes on both gluing surfaces of the miter without going thru the wood (so drill the holes in each piece of wood individually, making sure not to go thru the exterior facing surface, rather than gluing them together and then drilling thru the whole corner). glue and hammer in the dowels to one piece, then apply glue to the dowels sticking out, as well as the miter-cut faces, and gently tap the other piece of wood onto the dowels until both pieces of wood are flush. strengthens the joint, and is totally invisible when the piece is done, tho requires more precision and measuring.

Fantastic, super 👍

Very clever, thanks

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching 😉👍🙏

A trick I learned from a mentor of mine: sprinkle a little sand into the glue, just a couple grains per square inch, then push the two parts together. The sand acts like little grips and keeps the parts from sliding in the slippery glue.

@johnnycorn7225

2 ай бұрын

Hey, that makes sense I'm using it today thank you. This will save me time because I nitpick every connection that way w my high demand boxes under the pressure 5k watts puts on them

Fantastic!

Boa dica meu amigo valeu ganhou mais um inscrito 👍🏻💯💯

@WillWoodDiywoodworking

Жыл бұрын

😉👍🙏 valeu amigo, obrigado por assistir e deixar seu comentário

Beautiful

Great idea !

Parabéns!!

Belíssimo trabalho, Will! 😃 Qual o nome dessa madeira? É muito bonita!!! Abraços e se mantenha seguro aí com sua família! 🖖😊

@WillWoodDiywoodworking

Жыл бұрын

Olá amigo. Angelim. Grande abraço e cuide-se. 😉👍🙏🙏

Good idea

I would never do this, but it was fun to watch.

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching 😉👍🙏

You should "size" all end grain prior to glue up. Apply a light coat and let it wick in for a few minutes. Then apply your glue for assembly.

@johnd942

Ай бұрын

@mwc8493: Make your own video instead of criticizing!

Good info.

Thank you very much

@WillWoodDiywoodworking

Жыл бұрын

😉👍🙏🙏

Put glue into the holes & let it soak in for a couple of minutes before putting in the dowels !

Thank you for this good video😊

@WillWoodDiywoodworking

4 ай бұрын

😉👍🙏

Excellent

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching my friend 😉👍🙏

Very nice ✌️

@WillWoodDiywoodworking

Жыл бұрын

😉👍🙏

Why no glue in the holes before driving in the dowels?

Vc é um mestre no serrote! parabéns 🏆🏆🏆🏆🏆

@WillWoodDiywoodworking

Жыл бұрын

Valeu Carlinhos! Obrigado por assistir e deixar seu comentário 😉👍🙏

Wenn sich "alte Meister" so angestellt hätten, wären ihre Meisterwerke heute noch nicht fertig ...

Great vid

This technique is useful when using plywood, use bamboo skewers, the glue makes the bamboo swell up creating a tougher joint

Nice video

@WillWoodDiywoodworking

Ай бұрын

Thanks 😉🙏

@BarjoNurfajar

Ай бұрын

@@WillWoodDiywoodworking oke

No way you actually cut that miter with the dull saw ! Joint does look nice when done however.

@matthewhiggins3555

Жыл бұрын

Too right. This whole thing is fake. He seriously eyeballed those dowel holes that came out perfectly aligned?

@bighands69

Жыл бұрын

What on earth are you guys talking about?

@gregorykelley5555

Жыл бұрын

as evidenced by the circular saw blade burn on the left half

Th ❤❤u

Splines are much easier and better looking to reinforce a miter joint. The slots for the splines can be easily and accurately cut on the table saw using a simple jig.

What timber is he using? I have got some of this and local timber sellers could not identify it

I'm curious if the strength of this method vs doing the same by butt joining them w/dowels is stronger. Certainly it's easier and less time consuming. I'm thinking of building a piece w/dowels and glue holding the drawer corners. Any feedback or suggestions appreciated

Man that lil saw was trying its best

Which one stronger wood dowels or bamboo dowels ?

What type of wood were you using? I have some and cannot figure out what it is

Very tidy work

@WillWoodDiywoodworking

Жыл бұрын

😉👍🙏🙏

@cplxrh

Жыл бұрын

Glue the holes not the dowels!

Question? You use what looks like could be Mahogany wood for the frame, unless it is unseen I can then understand but if you had a little waste why didn't you make your dowells from the same material so the white Pine or Fir dowell would blend?

Didn't even have to clamp that miter joint... 😄

All you people claiming the hand saw is dull without actually knowing, ever think maybe this is a fine tooth cut saw? Can't really tell the TPI but a fine tooth cut saw will take a lot longer to complete the cut. Also, am I the only one who thinks he is working with hickory? If you have not ever worked with hickory, I challenge you to pickup a scrap piece and make a cut or notch it with your chisel. Then you'll understand.

Nice joint. Too bad on the tear out. Try clamping a sacrificial block at tearout side.

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching 😉👍🙏

Pretty, what can this be used for?

👍

@WillWoodDiywoodworking

Жыл бұрын

😉👍🙏🙏

Brilliant idea & some great tips in the comments too

@WillWoodDiywoodworking

11 ай бұрын

😉👍🙏🙏

Surprised the glue joint held hammering in the dowels. I might have sanded the dowels a little.

Should I be drilling the hole slightly larger than the dowl so it doesn't scrape the glue off as I hammer it in?

😱😱

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching my friend 😉👍🙏

Why didn't you spread some glue in the holes before pounding in the dowels? You can see how dry the sides of the dowels are when they emerge on the other side.

Master, your handsaw is dull, sharp it.

@TheMrWoodsman

Жыл бұрын

How very rude keyboard warrior, get a life.

@johnstarkie9948

3 ай бұрын

‘Sharpen’, not ‘sharp’.

@cpawaww5786

3 ай бұрын

​@@johnstarkie9948ooh watch out the grammar nazi is out. There their they're now, your gonna be aite kid

@driverjamescopeland

2 ай бұрын

Tell us you've never handsawn seasoned and quartersawn oak without telling us 🤦‍♂️

@marcelthecat6846

Ай бұрын

Also, why not just run the pieces through a table saw set to 45°?

Look at all the tear out on that would be unacceptable for me.

I’ve never seen this used in old furniture or building. What old craftsmen do this? I know I will try this.

@janbernad4729

Жыл бұрын

Nobody does it, and nobody has probably ever done that apart from people on youtube who try to sell it as a genuine skillful woodworking technique. In past, they would have used dovetails or maybe nails or reinforcing splines, in present it would be either the three previous or some hidden dowels, biscuits, dominos, screws, box joints/finger joints or some hardware which allows for disassembly. Given it looks ugly as hell, there is no reason to use this type of joint other than a lack of skill or laziness.

@adrianalanbennett

8 ай бұрын

@@janbernad4729 I think it looks very nice. Many other people do also. It is a fairly inexpensive way to make a strong joint. It is stronger than most of these other joints. Dominos, LOL. $1500 dollars for a Festool Domino tool. This joint would take a fraction of the time compared to either of the mortice and tenon or finger joint, and they make jigs for it that you can use a regular drill with. And it requires considerable less skill than others which is an advantage. As far as laziness goes, one might say if you are short on time, this joint would be helpful. So your estimation of it is lacking and due to your own ignorance and subjective sense of ugly.

@janbernad4729

8 ай бұрын

@@adrianalanbennett "I think it looks very nice. Many other people do also." This is just as subjective claim. "It is a fairly inexpensive way to make a strong joint. It is stronger than most of these other joints." Can you provide any arguments for this? If you look at common practice, if done properly, any of the joints I mentioned is strong enough for most applications. "Dominos, LOL. $1500 dollars for a Festool Domino tool." I know that it is expensive and provides not much advantage over dowels, I only included it just to have the list more complete. "This joint would take a fraction of the time compared to either of the mortice and tenon or finger joint, and they make jigs for it that you can use a regular drill with." Hidden dowels take even less time and they equivalent tools. "And it requires considerable less skill than others which is an advantage." Same goes for the hidden dowels. "As far as laziness goes, one might say if you are short on time, this joint would be helpful." If you're short on time, why not use the hidden dowels? If the time is your significant concern, the very dubious aesthetics of this joint are hardly worth the extra time and effort. "So your estimation of it is lacking and due to your own ignorance and subjective sense of ugly." I believe that ignorant would be to hold this joint as something genuinely useful and worth the effort, while there are many other solutions which are objectively better. As for the subjective sense of ugly, I can't claim that noone would ever find the supposed look of this joint ugly, but I can claim that majority of people would prefer some of the other options which i have listed, if they could choose. However, we can objectively judge the craftsmanship involved in making this joint, which does influence the actual look just as much as the construction of the join. Objectively speaking, the work isn't very good - there are gaps along the miter and the dowels, there is also quite a significant amount of tear out at the same places, which is something that could be in this case quite easily avoided with proper work procedures.

Agree that the dowels should have been grooved: all the glue just lost the reason for using it. The grooves would have held the glue in place much more strongly. Nevertheless, I appreciate the excellent video. Kudos.

I think you should have driven in two dowells in each joint from opposite directions. I don't know why I feel this way but I do. I also can't beleive you hand cut 45's in hardwood 2 by's freehand with no vice. //ji

I can't cut 45 with a sharp saw.

Don't like the tear out. But I like the design, tho!!

I don't think an old "master" would have tear out like that. Could have just clamped wood on the other side before drilling...

Weakens the joint more so it turns out. & PF gave them all hell.

My question is, did you clamp the miter joint and let it dry?

This looks like a time waste compared to dove tail methods. Not to mention a jig to clamp and drill before glue would save time. This looks cool and would strengthen a corner. I do not believe I have seen any old furniture doing this. Pretty sure your saw is dull.

@jamescoker3969

Жыл бұрын

I don't think the saw is necessarily dull. Could be wrong but that wood looked like hickory. Hickory is one of the hardest and most dense woods to work with.

Starts cut on camera will dull ass saw. Finishes off camera with mitre saw. Hand tool wood working y’all!

Oh my god the blowout from that drill. Which hack job then remains entirely visible in the finished product. Why are you giving tips to beginners??

The idea is good but the application could be better.

@WillWoodDiywoodworking

Жыл бұрын

Thanks for watching 😉👍🙏

*Incluso con la economía fluctuante, estoy muy emocionado de haber ganado $45,000 en mi inversión de $10,000 cada 10 días con la Sra. María Caldera.*

@WillWoodDiywoodworking

Жыл бұрын

Obrigado por assistir e deixar seu comentário 😉👍🙏

Whats the angle please?

@WillWoodDiywoodworking

Жыл бұрын

thanks for watching and leaving your comment 😉👍🙏🙏

Drilling on the 45, and well executed. Nice work and thanks for sharing!

Did the guy really just hand saw a miter... Twice... Then bust out an orbital sander?

The bored holes HAVE to be soaked with glue, otherwise this is a nothing video. Dowels coated into coated holes makes perfect sense.

@WillWoodDiywoodworking

Жыл бұрын

thanks for watching and leaving your comment 😉👍🙏🙏

Pro tip….buy a chop saw….

So, you won't use a powered miter saw because you're old school or something but an orbital electric sander is OK? After watching this video I am convinced that buying a Festool Domino is absolutely the right thing to do.

Hand saw seems not working properly.

Looks good, but why not just do a dovetail for that level of effort?

@hawkenman.549

Жыл бұрын

Because the article is titled, For beginners. It’s just a quick and simple alternative to make a 45 very strong. Most beginners have no idea how to cut or layout dovetails. It’s to help beginners get into wood working , to build their confidence then they can move on to the more complex joinery. At least that’s my take on it, for what it’s worth.

@Skiiiiiifreeeeeee

Жыл бұрын

@@hawkenman.549 fair enough. No doubt it is a strong joint. Although my first project outside of framing and screwing plywood together was a dovetail box many years ago!

@hawkenman.549

Жыл бұрын

@@Skiiiiiifreeeeeee I read you loud and clear. Thank you my brother.

The hand saw "work"....very bad burn you left on that wood stud. Lol.

Finish nails would be a lot less obvious and less work while also being stronger. Just saying.