My dad was a carpenter and passed away a few years ago when I was 18. All of his tools have been sitting in my mom's garage and I've been inspired lately to try and start some woodworking myself, partially as an ode to him. I remember a lot of what to do from him, but these videos have been really helpful and I appreciate them a lot. Thank you for posting

@creativelife9871

3 жыл бұрын

I hope you do it!

@codacreator6162

3 жыл бұрын

Do it! You will NOT regret it!

@williamlott7612

3 жыл бұрын

Perfect way to remember and honor your Dad. Personally I love old tools and find great pleasure and satisfaction in restoring them, if necessary, and using them as intended. Remember, old doesn’t mean bad. Darlington, South Carolina

@sarkycutt9611

3 жыл бұрын

Don't beat yourself up if it doesn't come as I had a lot of family who were carpenters and shopfitters etc. Now in my 40s I am interested and really enjoy it but years ago I wanted to drink and party :)

@davids.688

3 жыл бұрын

@@sarkycutt9611 Thumbs up for the subtle and clever nod to your younger drinkin’ days!

As an actual beginner I find the mystery was not taken away here lol... "I like to clean up one side first then turn it around and rip it to the exact width..." is baffling to me, while using a load of big and expensive looking electric wood working tools. If anyone knows of any vids for absolute beginners I'd love to find some! Tia.

@sebastiangudino9377

Ай бұрын

Absolutely agree, how is this for beginners??! "Take care of your tablesaw" Dude, I don't know how to make a box and you expect me to own a tablesaw?

@MsPBJTime

6 күн бұрын

Also, a table saw is an advanced tool. You don't want to just hop into using one without learning safety procedures...unless you want to lose a finger.

Steve I just wanted to say. I've been woodworking since about 2020. I started it around the time I lost my mom to cancer. It really was how I coped and kept myself mentally healthy in that time. This video is what I did for my second project and it really ignited my love for this craft/hobby. I have grown a lot in my skills since then but I attribute it to this video sparking my interest. So thank you for what you do and how you do it. I don't know you but you helped me out of a dark place. I wish you all the best and hope you are doing well.

I made a box! Thank you. It's sitting on my desk right now, and I'm very proud of it. Even if I did get turned around somewhere along the way and the grain of the end panels runs vertically. Call it a design choice. This great little project helped me build some new skills, get comfy with the table saw and I really feel capable of moving forward. Very good video, guide and plans.

@kuro758

2 жыл бұрын

Ayooo good job🥳🥳♥️

@cohen860

Жыл бұрын

"call it a design choice". I love it!! :-)

@MindaugasSnegirevas

10 ай бұрын

That's a bot.

@AusterEngineer

8 ай бұрын

If it’s not made out of plywood, keep in mind that your box is what is called “cross grain construction”, where the grains run in different directions. If it’s solid wood and cross grain you’d use only nails or fasteners, because the wood moves in different directions and fasteners can bend a little so it doesn’t pop apart. Plywood doesn’t move near as much as solid wood so it’s be fine. Just keep that in mind if you make another! Thank you for listening to my TedTalk

Nice. Now all I need is a table saw, work bench, garage,wood, clamps, sander, straps,safety gear and I should be good to go. Ps. And a stir stick.😉

@30eesh

5 жыл бұрын

at least ya connected to the World Wide Web...tats a start...:))

@ismelltrouble7266

5 жыл бұрын

ShinDig buy me a plainer. 😉

@ScottPankhurst

5 жыл бұрын

or you could just watch stuff on the internet which needs nothing, and achieves nothing, right?

@jon.b.official

5 жыл бұрын

On a brighter note the paint stick is free 🤣

@chriscyrelestil304

5 жыл бұрын

just to make a basic box

One of Steve's best quotes is something like " it won't be perfect, but you made it. Don't let your mates criticise it, after all, what have they made? Nothing, because they spent the weekend stuffing their faces watching box sets on Netflix"

@jewelarender2451

Жыл бұрын

ABSOLUTELY!!!! BUT, DON'T THEY LOOOOOVVEEEE TO FIND FAULT IN SOMETHING THAT YOU WORKED SO HARD ON. Guess it makes them feel good. 😠😠😠

@chrisnedbalek2866

Жыл бұрын

Damn right!

@saviour4743

Жыл бұрын

Heck yeah!

@SUNNYCLOUDBUNNY

Жыл бұрын

True. We all deserve friends that build us up and acknowledge our work, not break us down or find fault in everything!

@conordia6906

Жыл бұрын

hahaha i like this

This guy has a great charisma, love him, so encouraging, down to earth and truthful

@AnxiousCowboy

4 жыл бұрын

He’s a bit of a prude though

@roastchicken2114

3 жыл бұрын

@@AnxiousCowboy Out of curiosity, how so?

@oscar38

3 жыл бұрын

He's a natural teacher, and gets straight to the point all the time. Not full of boring waffle

@AlphaTroniks

3 жыл бұрын

Steve is my first carpentry teacher when I started woodworking in 2012

First, let me say I am 63 yo and never really tried word working. Been thinking about a hobby after retirement. I came across your videos and got hooked. I've had a table saw for years. Recently bought a 12" miter saw. I think I got hooked at that point. Today I got a Router/Plunge Router set and gave it the good ol college try. Not there yet, but boy did I have cutting rabbits and coves and this and that. Don't know if I will ever be good at this, but thank you for your video's! They are fun to watch and easy to follow. Going to try the box tomorrow I think. I will hopefully let you know how it turns out. Thanks again.

@mrp7640

4 жыл бұрын

Nice

@franciscoabarca3617

4 жыл бұрын

So wholesome

@davecoates2308

4 жыл бұрын

How’d it go?

@senex250

4 жыл бұрын

Please report on how it went Sir!

@gbwildlifeuk8269

4 жыл бұрын

Jim Burton now you have a router you'll be amazed how much mess they make. Takes longer cleaning up 🤣🤣🤣

Beautiful work. Your enthusiasm for woodwork is infectious. No nonsense, no gimmicks, just straight instruction.

This was well explained and the demonstrations seemed easy to follow. I have never tried wood working (beyond decorative wood burning) before, but once I build up some basic skills I’d love to rewatch this video and try to make this beautiful box!

Just want to say thank you for the videos. I've watched this video numerous times now and I am still learning new things each time I watch. Since this has become my new hobby and therapy, your videos are perfect and always very detailed on how to do it all. So thank you.

I just finished the box and it was an AWESOME learning experience and for to spend time with my father. I changed the height from 3" to 5" and put hinges on it. Thank you so much for the plans.

I love your enthusiasm and natural approach to teaching. Thanks for sharing.

Thanks for the suggestion, I am 74 years old and since I am practicing social distancing and staying home this was the perfect project....it was rough but I got it done

@viovenda8922

3 жыл бұрын

I bet your box came out wonderful Elias!

@marcos-4469

3 жыл бұрын

@Aleph Leonine From the look of his profile picture he looks older which means the coronavirus is more dangerous to him, its not toxic. Your toxic

I took up woodworking in my 70's in retirement. The first thing I did was sign up for Steve's woodworking for mere mortals Weekend Woodworker course, after I bought his recommended tools. That course changed my life and I've been using the many lessons I learned ever since to make all kinds of things from wall hangings to a queen sized bed. Steve makes it easy and fun, and throws a few laughs in along the way. He also teaches many lessons on safety, and always keeps your pocketbook in mind. I'm no artist, so I prefer to follow instructions....and I've found no one better than Steve Ramsey to provide those instructions.

Thank you sooo much I have never wood worked before and have limited tools. I was able to make my father a box for his vintage knife collection for Christmas. I can not wait to give it to him.. thank you so much for making beginner friendly videos for guys like me.. thank you with all my heart.

I’m sitting on a small mountain of timber from Western Australian Jarrah trees that I milled myself a few years ago. I’m a steel fabricator by trade and am keen to get into wood work to do something with all that I have. I’m enjoying your videos and just wanted to say thank you for all of your invaluable information. Cheers.

@joniindo6127

4 жыл бұрын

Do you have good info to process the wood from timber?

Man you made my day with this. So cool to have you back. We need you Steve!!!!!

Steve what I like about your videos is not only the educational part but that you use equipment that is what the average woodworker might afford/have. Thank you!

Love the energy you have Steve, even on these simple things.

Love your videos you explain everything to where everyone can understand them

@SteveRamsey

5 жыл бұрын

Thanks James

You provide such great material to your viewers. I appreciate all of your hard work. I truly appreciate it!

I appreciate you very much! I have been binging on your videos for two weeks now and I wanted to say hi and THANK YOU! I picked this vid to post on, as it is both rather fresh and has this beginner, weekend woodworker spirit as well. I assume there are a lot more passive viewers of your channel than active ones. It must suck not to be able to know how many people you are actually inspiring and educating with this. I have enormous respect for what you are doing here. Too bad I don't own a house and a garage for my own workshop yet. For guys like me, living in a city or without workshop real estate, there are options still. Hobby enthusiast workshops are growing like mushrooms in bigger cities (in Germany at least). There might be such a thing in your vicinity.

Those sanding sticks are legit. I made a few with different grits and loved them in my latest project, the mobile table saw cart. I wish u had reviewed this video again - the advice on making rabbets is spot on and I could have used the refresher before my first rabbeting attempts. Test pieces are no joke. Thanks Steve - this video is excellent.

Enjoyable video, Steve. I especially appreciate that you took the time and effort to show how one can cut those rabbets without using a router. Like lots of people, I don't own a router--yet.

Steve, this is such a well delivered instruction video! The simple skills, done right, can make so many things! Thanks again, and keep it up!!

Thank you Steve Great tutelage I’ve enjoyed all of your videos I just finished setting up my woodshop making my first desk for my office! Your guidance has been very much appreciated especially learning to use jigs

Thank you Steve Ramsey for doing these videos. For us new woodworkers, these are wonderful.

I LOVE that you're making these kinds of videos again!! So much I love them.

@MadHatter764

5 жыл бұрын

Yes, back to the basics - that’s what made Steve famous - All we seem to have recently is pushing some online course and guild or something. What we really want is Steve building simple things with simple wood and cheap tools.

@CodeSe77en

5 жыл бұрын

@@MadHatter764 Amen!

@earthslargestdatabaseofwoo724

4 жыл бұрын

..

I will say, I've completely loved my flat ground blade. They cost just as much as normal atb blade and having it as a backup and for special purpose use has been useful. I know people don't always like investing in table saw blades, but having the right tool for the right job I think is really important. There's no single blade really does everything well. Having Rip blades, cross cut blades, combination blades, and dado stacks all have their purpose. Investing in your shop can allow you to work more efficiently and more safely. Not to mention you'll end up with better tool wear - saving you in the long run.

I just started woodworking and I like this guy Steve, and learning a lot from him especially basic knowledge. However, what kind of beginner have 8 pcs of Clamp, and Table Saw.....

Love your videos. I just got into building outdoor furniture last year and your videos are very helpful- thank you!

Always great content. As a weekend woodworker myself your videos have been a great help over the last few years. Thanks for the inspiration and advice I for one really appreciate it.

@SteveRamsey

5 жыл бұрын

Thank you! That means a lot to me.

Create another basic box using manual tools like chisel and hand saw. Some beginners only have those tools as they are just starting. Hope you'd at least consider. Thanks!!

@TheLordBeast

3 жыл бұрын

Great point this definitely doesn’t seem beginner at all.

@ant_yep

3 жыл бұрын

That would be nice

I really appreciate straightforward instruction on practical projects. Thanks.

You are one of my favorites, I truely enjoy the funnier videos. Your humbleness is so entertaining. Thank you so much for the years of truely amazing content.

Hey +Steve Ramsey, I like how you explain your project with simple easy to learn instructions. Also thanks for your tool list, I manage to pick up a lot of tools well under $1000.

It doesn't matter how advanced or how many tools I have I been watching for many years and totally enjoy your videos.

Thanks for your videos. I've recently gotten into woodworking and this is the first thing I'm working on.

Always start with Steve for any new project type. Offers great, easy approaches for "stuff."

Finishing my second box. Gave the first one to my wife. You got me hooked Steve. Thank you. PS Next one I might try miter joints.

every time I cut a rabbet I`m always a hare off

@SteveRamsey

5 жыл бұрын

I'm totally going to steal that.

@68HC060

5 жыл бұрын

That was a clever one!!

@bralgon63

5 жыл бұрын

I cut off a kangaroo's legs - totally hopless......

@nathanjohansen7169

5 жыл бұрын

I don't carrot anybody says, that was a good one!

@lukedogwalker

5 жыл бұрын

Terrible. Liked... but still terrible! 😉

This was the best and funest project I have ever made. Thanks Steve. I was ambitious and used oak and it came out just great

I've learned so much from not only your knowledge but your way of teaching! Thanks for the info

Steve, thank you for these basics videos. I am an aspiring woodworker thanks to Channels like wood and crafted workshop but those guys are way beyond what I can do at this point in my small two bedroom apartment. I do not have the ability to have a table saw at this point but I make it work with what I have for small projects. Keep the videos coming! If you have any suggestions for us apartment people I would definitely be interested in hearing your ideas.

Steve you are one of the best content creators on KZread. Well done and best wishes to you.

Basic instructions and basic box for an old guy with very basic skills. Valuable for me. Thank you!

Dude, you are incredible. Thank you for your time and patience building these wonderful teaching tools.

As a woodworker, I learned the hard way. I started off not knowing how to do anything, and worked my way up. I originally used to nail everything together. Boxes, desks anything really. In reality, the best way is wood glue and a dovetail joint. I have enough skill now to chisel a dovetail joint. But, I would not recommend this for beginners. A miter joint is simplistic and easier to produce. By no means am I an expert, and I still have a lot to learn, but I want to encourage everyone to try woodworking. It is tons of fun and the final product is extremely rewarding.

@sellbydate

Жыл бұрын

Thank you I was getting disheartened then because even this box seems difficult at the minute because he is talking about items and I don't know what they are yet. Can you recommend any books where I can learn?

I’ve watched this video probably 50 times, and after months of interest and watching all of Steve’s videos, I broke down and bought a table saw. I built this box as my first project, and I am hooked. Thanks Steve!

@NeanderthalDogma

8 ай бұрын

What have you built since?

I've been woodworking for years, but I learned some great tips from this video! These tips are AMAZING!!!

This was super helpful, I may not have all the tools but I know the direction I need to go in so that I can make something special for someone. Thank you for the help!

Welcome back “ole’ Steve!” Loved this video!

Hey Steve! - Been marathoning your vids for a couple days now haha. Must say I really love how you explain every thought process behind your videos/projects. Very easy to follow for someone who has zero experience with wood working. I move into my first house in a good 2 months! Since I am needing furniture for everything, I thought about trying out making my own (I am the kinda person who loves DIY projects/Hobbies like these, so could be fun!) as your videos have really inspired me! Keep up the awesome work!

Steve: Thank you so much for your web sight and KZread channel. Really like your style and instructions for the projects. Having fun learning and doing... 👍

Hey Steve, I followed your procedure and made my first box. It's a box - I'll say that much for it - but it didn't turn out QUITE as good as yours. The biggest lesson I learned is to be aware of the blade kerf and which side of the blade you have in mind when you are setting the fence. Thanks loads for the video and I will keep practicing.

10:18 that lid close sound, so satisfying

"rebates in the UK" Thank you for making me super sure I wasn't going crazy watching US woodworkers! Much love from the UK

@SteveRamsey

5 жыл бұрын

Thank LIam! I have no idea how rebate (which makes a certain level of sense) became rabbet (which will always sound like a small furry animal!)

@howardchambers3163

5 жыл бұрын

I was taught “rebate” but watching a lot of US “how to videos” has taught me to auto translate. I was also taught to be able to make everything with hand tools before I was let loose on the power saws. As a result I have a real love of hand tools. They teach patience.

@scottparrish8566

5 жыл бұрын

@@SteveRamsey English pronunciation in the UK changed in the 18th century to the more posh sounding English of today. In the 17th century and earlier English in the UK sounded more like North American English. It is entirely possible that "Rabbet" is an archaic pronunciation of Rebate that was preserved in North America but changed in the UK. A corruption of the original term seems less likely (other than in spelling which is rather variable anyway), as there was no shortage of people working with wood in the North American Colonies or early US/Canada who would have been familiar with woodworking terminology.

@bertkutoob

5 жыл бұрын

@@howardchambers3163 I could not agree more. It irritates the willies out of me the number of people who have a machine for everything and then call themselves "woodworkers" instead of "machine operators making things out of wood". But, as they say in Southern USA, "bless their hearts!" I'm not saying there is no place for machinery in my definition of a woodworker but IMNSHO a decent table saw and hand drill is about all you need, together with a few small really sharp planes (including a block plane) and some chisels. Oh, and as many clamps as you can fit in the garage, still leaving space for the car.

@kyleallen1858

3 жыл бұрын

Steve wow 1.5m followers who woulda thunk?

I love your enthusiasm and explainations! Thanks for the video!

Thank you your tips are great !!! Just starting with a bed project, dont want to mess it up

dang that sound of the lid dropping in at the end was so nice.

Steve you're the best! And wow, I love woodworking or the thought of it but I'm a beginners beginner...even this box is extremely difficult for me 🤦‍♂️

This was the first video of Steve's I ever saw...not entirely sure how it came into my algorithm, but I have never looked back since. Current member of the Weekend Woodworker and Weekend Workshop courses! Love it.

I did my first box with your instructions. Thank you very much. God bless!

Steve, you are a great woodworker and you are a great presenter. Congratulations on the beautiful work ! I take your work as my source of inspiration and learning in the art of working wood.

You are so right about that - can you make a box you can make anything. I might copy that line ;) Well made video and a great channel!

Woohoo! Made my first box after watching this using the rabbit joint. My table saw has always been intimidating for me. Getting a better feel for it. Thanks!

Ive always been interested in being handy and learning how to make things with my hands. I've always felt like I start things too late but seeing all these folks of all different levels in the comments gives me hope.

Wow, you do great teaching videos!!

This is the first one of your videos I've ever seen, and I liked and subscribed one minute into your video.

Hi Steve. Long time viewer. Retired carpenter. For my entire career, when asked what I do for a living, I responded,”I make boxes”. You really nailed this one. 😅

Thanks man for all the info in all your videos. Really helped me make desks for my daughters. They are very useful in times like these.

Steve, I have a confession to mmmmmmicro jig! I miss those intro's I have to admit. You always made me smile with them. Thanks for the video and keep up the great content.

@68HC060

5 жыл бұрын

I too liked them very much. Always hate advertisements, but this is different. Besides, it makes you more aware about safety on the tablesaw; so not only MicroJig benefit from more sales, but I'm pretty sure an unknown number of fingers have been saved over the time already. If just one finger has been saved from a tablesaw accident, I'd say that it'd be worth it having in every video on KZread - especially if that finger is belongs to me. ;)

@learningthehardway6186

5 жыл бұрын

I miss them too. It sucks that KZread is set up such that genius bits like that actually hurt his channel more than help.

@iamjimgroth

5 жыл бұрын

As funny as they are, I prefer to not have ads when I pay for the premium service.

@68HC060

5 жыл бұрын

I understand, however you can just skip in-video ads; you can't do that with those forced upon you by Google ... sorry ... KZread.

@iamjimgroth

5 жыл бұрын

@@68HC060 I like to have KZread running when I sleep and I prefer to sleep without advertisement. I really wish content creators were paid enough to not need in video adverts. Especially that horrible type where they Segway into it as if it was part of the video subject.

You are a genuine legend. Keep up the good work.

@larrypu5619

4 жыл бұрын

Larrisa

I discovered woodworking during the pandemic. I have always had a knack for making things. I took it to the next level and emersed myself in it. It literally saved me.

Steve, you always avoid hype and I really appreciate that. Your channel is some no nonsense, down to earth stuff with some great advice (like don’t clamp edge to edge pieces too tight or you’ll get a buckle.) Thanks for sharing your approach!

I could watch your videos all day Steve 😍😍😍

@SteveRamsey

5 жыл бұрын

Thank you!

Hey, one of my favorite tools. The free paint stirring stick. It's so versatile.

@SteveRamsey

5 жыл бұрын

The price point is perfect.

@thebeststooge

5 жыл бұрын

At the big box stores they haven't been free for a very long time now. :(

@cliffcarlo180

5 жыл бұрын

Versatile lol

@nixter8739

5 жыл бұрын

Make great shims too.

@thebeststooge

5 жыл бұрын

Yes they did but now they are 1+ dollars each. Considering the price of paint those damn sticks should still be free.

Thank you. I finished my first box five minutes ago. Great experience.

I also use your paint stirring stick idea for sanding. I went a more permanent way and bought a length of aluminum bar stock 1/4" x 1" and cut it into one-foot lengths. I used two sided carpet tape to apply strips of one-inch wide abrasive tape to each side. I made half a dozen of them and run 80 grit to 400 grit on them. I have had them for eight years now. They are among my favorite tools.

I’ve been looking up woodworking classes near me and then I found you. Going to try this first before spending $300 on a basic box making class lol. Thank you

@ronnie3044

4 жыл бұрын

You can use a hammer and chisel for the joints. And a hand sae or jig saw to cut the plywood. The jointing with hand tools will take some oractice but ive seen others do it

You are an excellent instructor. With a minimal intro, you dive right into the project or lecture and you are very concise and well versed. I always learn something when I watch your videos - extremely valuable to a novice such as myself. Thanks - So Much - for sharing your knowledge and expertise!!!

@SteveRamsey

5 жыл бұрын

Well thanks Randy. I really appreciate that!

I have been doing basic woodworking for a number of years and just bought my first table saw. Not sure what took me so long! I've been watching your videos on table saw safety and technique and learned a lot. This box will be my first project! Thanks for the great content!

@MrSka7cis

2 жыл бұрын

Same. I just bough my first table saw yesterday. I also aim for this project to be my first. Good luck and Thanks for Steve for providing great content and inpsiration.

So many complain about the costs... $1K... but so many of those same people spend that much on golf clubs, media set-ups or auto accessories... it is a modest investment in a lifetime hobby or potentially a start-up business adventure... I know lots of friends who anguished at spending $1k on the first beginner DSLR/camera... then went on to pay $2-3k for a new lens or camera body upgrade... THANK YOU for the great information for some one who currently owns a $150. table saw but is now eyeing an upgrade.... I am just waiting for the $600 ones to come on sale...

@misbehavens

2 жыл бұрын

Some people pay over $1k for a phone!

Nice work Steve! Great to see you again!

A bit of twine and a couple twists of a stick are a decent alternative to the strap. Nice demo. ~Hans

@GLACIOUS13

4 жыл бұрын

I'm new to this. Thanks! Starting to think I might be able to "jury-rig" my motorcycle tie downs some way.

Great video. Simple project with a lot of good tips. I learned I always clamp my projects way too tight, hence the reason they are not always flat......and now I know. Thank, Barry G. Kery

Thank you so much for this explanation it really helps to have it broken down!

great explanation! that's why your videos are so good!

Great video Steve ! Learned alot !

I love your videos and how you explain things. Thanks so much for sharing your knowledge.

I have intermediate to advanced level toolset and a beginner level mindset! I am so excited to find your videos.

I’ve always wanted to learn how to woodwork. Maybe a box will be my first piece.

Good job as usual young man. 😎

Hi Steve, just wanted to let you know how much I appreciate your videos. As a (very) mature lady with not much expertise, and even less money, just starting out on my woodworking journey, I love your practical approach and easy to follow instructions. I’ve been a subscriber for a few years now and continue to watch your videos multiple times. You are one of the very few woodwork KZreadrs who still appreciate that the majority of viewers don’t have access to Festools and CNC machines. I’ve unsubscribed from quite a few who have lost sight of us hobbyists out here, or just want to post videos that keep their sponsors happy but have little actual value. So, stay humble and don’t sell out to the sponsors and leave us behind. Thank you Steve!

I subbed immediately. Loves the way you say that most woodworking comes from knowing how to make a box because it really is the fundamentals of dimensional construction.

Great video. I like the way you keep it simple. I'm just curious though, why you chose a bottom rabbet, rather than using a groove to inset the bottom. I've made thousands of small boxes and trays, working in a production shop and have always found that a groove is just as easy to make as a rabbet, without the need to glue the bottom in place.

When I learned to sew, I learned everything was a pillow case. I love basic, accessible instructions like this. Thanks! And thank you for using safety gear. So tired of seeing videos where people maybe doing good work but modeling crappy habits.

Safe, simple, clean and clear... great job!

I'm a beginner at wood working, I love the way u explain things please always keep it simple and never assume people should know things, I always need the details, at 61 I'm a slow learner