The Reale Deal Show #33- The Definitive Guide to Swimfins
Jay covers everything you need to know about bodyboarding swimfins.
Жүктеу.....
Пікірлер: 30
@mikeformisano97282 жыл бұрын
YAY! Thanks for the shoutout Jay! I was in pretty good shape, had a great board, but terrible fins and got an "education" at Cloudbreak on the Tavi Tube Tour 2019. A proper set of fins, booties, and an endless supply of belly jelly are a must have.
@bchamp51932 жыл бұрын
What is surprising is that the Churchill's design did not change for 30 years and those fins are still used by top riders!
@eBodyboardingcom
2 жыл бұрын
That's because fin molds cost about $15,000 each, and since Churchills are asymmetric fins, that would be $30,000 per size to change them.
@arizonaranger527 Жыл бұрын
The Churchills are great 👍
@grakkerful2 жыл бұрын
Jay, why two microphones? You are right on with the personal preference / comfort being #1 factor.
@eBodyboardingcom
2 жыл бұрын
The lavalier is for my phone which is shooting the video. The studio mic is for the audio podcast which I record on my laptop.
@1adammorton1332 жыл бұрын
Epic stuff brother.
@32srt322 жыл бұрын
why dont fin companies have euro sizing on their size charts? im a euro 41 and can be a us 8 or us 9 depending on the brand shoe
@32srt322 жыл бұрын
looking to get the tribe t1 or MS viper fins? which one?
@GaryKrall2 жыл бұрын
cool glasses - who makes them and what is the model?
@marcoaldeia835211 ай бұрын
Hi, how would you fix the dibits? With hot glue?Thank you!
@eBodyboardingcom
11 ай бұрын
Sorry..."dibits"? Do you mean "divots"? Sorry....I made this video over a year ago. Do I mention this in the video somewhere?
@marcoaldeia8352
11 ай бұрын
@@eBodyboardingcom yes divots, I mean the wholes in the deck. On this vídeo you ironed the damaged part of the board, in order to melt and glue. If there was a small whole would you apply hot glue?
@01-02 жыл бұрын
Hi Jay, what is your opinion about the classic viper and the viper V5 model? Greetings from peru!! Master 🤙
@eBodyboardingcom
2 жыл бұрын
The "Classic" Viper is the V7. The V5 is just a shorter version of the V7. 5" blade instead of 7" blade. That is a heavy, narrow fin. Won't work if you have wide feet or wear thick booties. They have a ton of power though!
@crunchers92 жыл бұрын
Jay, I've used the full booties for years, but since I walk over rocks to get to the surf I am constantly putting holes in the heel. I'd love to find a soft booty with a reinforced heel, maybe a rubber pad there?
@JayReale
2 жыл бұрын
Funny you mention this...we have new booties and fin socks coming in the next 2 weeks with Kevlar-reinforced bottoms on them for this very reason.
@crunchers9
2 жыл бұрын
@@JayReale Be sure to include that in the first possible sales e-mail. I'd love to test those out. My last pair developed a hole after just a handful of snorkel days.
@lancecarmine35162 жыл бұрын
Jay when you were sponsored by Churchill, did you modify your fins to have toe holes for sand drainage??
@eBodyboardingcom
2 жыл бұрын
No, just kept them as is. Never had an issue really.
@mrbyle12 жыл бұрын
Jay, what ever happened to Scott and Redley fins?
@eBodyboardingcom
2 жыл бұрын
Scott stopped making fins 30 years ago. Redley stopped in 2006. It's a very competitive market in the fin game.
@1adammorton1332 жыл бұрын
Scott fins were made in the 60s and 70s my man. Redleys are from Brazil.
@mauisku2 жыл бұрын
churchill mehkahpa's
@franckymatmat70252 жыл бұрын
Be careful, asymmetrical fins can cause problems with knee or ankle joints, because the thrust is not in line with the leg and this causes pain. I had Churchill fins, they were fine but my knee didn't like them 😭 Has anyone else had this problem? 🙄
@bblast88
2 жыл бұрын
yes!!!
@chrisedney6869
Жыл бұрын
Yea I’m switching to symmetrical yuccas coz of bad knees in general. No more churchills 😮
Пікірлер: 30
YAY! Thanks for the shoutout Jay! I was in pretty good shape, had a great board, but terrible fins and got an "education" at Cloudbreak on the Tavi Tube Tour 2019. A proper set of fins, booties, and an endless supply of belly jelly are a must have.
What is surprising is that the Churchill's design did not change for 30 years and those fins are still used by top riders!
@eBodyboardingcom
2 жыл бұрын
That's because fin molds cost about $15,000 each, and since Churchills are asymmetric fins, that would be $30,000 per size to change them.
The Churchills are great 👍
Jay, why two microphones? You are right on with the personal preference / comfort being #1 factor.
@eBodyboardingcom
2 жыл бұрын
The lavalier is for my phone which is shooting the video. The studio mic is for the audio podcast which I record on my laptop.
Epic stuff brother.
why dont fin companies have euro sizing on their size charts? im a euro 41 and can be a us 8 or us 9 depending on the brand shoe
looking to get the tribe t1 or MS viper fins? which one?
cool glasses - who makes them and what is the model?
Hi, how would you fix the dibits? With hot glue?Thank you!
@eBodyboardingcom
11 ай бұрын
Sorry..."dibits"? Do you mean "divots"? Sorry....I made this video over a year ago. Do I mention this in the video somewhere?
@marcoaldeia8352
11 ай бұрын
@@eBodyboardingcom yes divots, I mean the wholes in the deck. On this vídeo you ironed the damaged part of the board, in order to melt and glue. If there was a small whole would you apply hot glue?
Hi Jay, what is your opinion about the classic viper and the viper V5 model? Greetings from peru!! Master 🤙
@eBodyboardingcom
2 жыл бұрын
The "Classic" Viper is the V7. The V5 is just a shorter version of the V7. 5" blade instead of 7" blade. That is a heavy, narrow fin. Won't work if you have wide feet or wear thick booties. They have a ton of power though!
Jay, I've used the full booties for years, but since I walk over rocks to get to the surf I am constantly putting holes in the heel. I'd love to find a soft booty with a reinforced heel, maybe a rubber pad there?
@JayReale
2 жыл бұрын
Funny you mention this...we have new booties and fin socks coming in the next 2 weeks with Kevlar-reinforced bottoms on them for this very reason.
@crunchers9
2 жыл бұрын
@@JayReale Be sure to include that in the first possible sales e-mail. I'd love to test those out. My last pair developed a hole after just a handful of snorkel days.
Jay when you were sponsored by Churchill, did you modify your fins to have toe holes for sand drainage??
@eBodyboardingcom
2 жыл бұрын
No, just kept them as is. Never had an issue really.
Jay, what ever happened to Scott and Redley fins?
@eBodyboardingcom
2 жыл бұрын
Scott stopped making fins 30 years ago. Redley stopped in 2006. It's a very competitive market in the fin game.
Scott fins were made in the 60s and 70s my man. Redleys are from Brazil.
churchill mehkahpa's
Be careful, asymmetrical fins can cause problems with knee or ankle joints, because the thrust is not in line with the leg and this causes pain. I had Churchill fins, they were fine but my knee didn't like them 😭 Has anyone else had this problem? 🙄
@bblast88
2 жыл бұрын
yes!!!
@chrisedney6869
Жыл бұрын
Yea I’m switching to symmetrical yuccas coz of bad knees in general. No more churchills 😮
I forgot about Belly Jelly.
❤️❤️💥💥