Wanna make it even easier. Remove the backing from only the Hexagon then apply and line up the hexagon and then lift up and pull off the backing from the rest and lay it down. Do this with each layer and you don't have to worry about your design sticking in the wrong place.

I’ve literally watched five million videos and cannot believe how easy you made it look! I love this tip!! You’re awesome!! I’m so glad I found you!

@MakersGonnaLearn

4 жыл бұрын

Awe, thank you so much! We're so glad we could help you!

Wonderful vinyl tip for aligning other layers. Excellent start to finish tutorial. Wishing you Tanner, Rachel, Courtney, Joe, Blake and the entire MGL team a super week. Hugs Susan

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching 😊

I know it's 2020, but this video SAVED my life. I'm on day 5 of having a cricut and just did my first layered vinyl with 4 layers. Thank you so much, Tanner! You give the best explanations :)

@MakersGonnaLearn

4 жыл бұрын

Glad it helped you, You're so welcome Becca :)!

@angelab105

4 жыл бұрын

wow that's great I had mine for 2 months and finally decided I'vevinylhelped.

This was PERFECT and I watched 2 of your layering tutorial. If I can simply add - when you're sharing your screen, would it be too much to show your pointer. It would help to show where your arrow is. BUT THIS VIDEO was AWESOME!!

@annalydiavasquez7428

2 жыл бұрын

Yes!! I am new and that part totally lost me !

Thanks heaps for your tutorial I’ve been so scared to try layering But now explaining everything so wonderfully makes me feel more confident

WOW!!! Of all the "Hacks" I've watched from multiple sites, this has been the most informative and helpful one I've seen yet! Thank you!!!!

@MakersGonnaLearn

4 жыл бұрын

Thank you so much for watching!

Nice explanation of the technique. The only thing I would add is that when I have a layering project, I place 3 triangles spaced around the image instead of your single hexagon. This gives more accurate alignment, especially on bigger jobs.

@nebelungpixie9373

3 жыл бұрын

Excellent point. I am horrible with alignment. Cannot draw a straight line with a ruler. (Literally. I cannot.) This will help.

@MakersGonnaLearn

3 жыл бұрын

Whatever works for you :)

@MakersGonnaLearn

3 жыл бұрын

Sure!

@nebelungpixie9373

3 жыл бұрын

@@MakersGonnaLearn Y’all rock !!!

@ebonylewis98

2 жыл бұрын

Would this technique work for like 6 layers or more ? I need to try this out !

I love the hexagon trick for layering. I just saw a video that used two boxes. Yours and the other one, are absolutely the best! " "Burnish! Burnish! Burnish!" Thanks so much.

@MakersGonnaLearn

2 жыл бұрын

You are so welcome!🙂

Oh I wish I'd seen this before I tried my first project, will definitely be doing this from now on... thank you for making it look so simple

I always avoided layering, because I could never line things up. But with this method I feel ready. 🥰👍

@MakersGonnaLearn

3 жыл бұрын

Yay!! You can do it!👌

@Temedrano1

3 жыл бұрын

Yeeeesssssssssss!!! Genius idea 💡🥰

I’ve owned my Cricut for a couple years and have only done basic projects. Tanner-you have helped me to expand and try new things! I love how you explain all the steps.

@MakersGonnaLearn

3 жыл бұрын

We're so glad to hear that!! Thank you for your kind words!!

Omg I just bought a vector cutter plotter and barely realizing this is much more complicated then I thought, but than I came across your video and really you made it look so simple thank you and. God Bless

WoW!!! I can't believe how super easy you've made layering. Thank you soooooo much!!

@MakersGonnaLearn

2 жыл бұрын

You are so welcome!

I just love you. This is my go to Walmart whenever I have a layering project. Instructions are clear and simple to understand. Thank you so much! I love all your videos.

@MakersGonnaLearn

4 жыл бұрын

You are so sweet! Thank you for your kind words!

You just changed my life for real!! 🙏 I’ve watched hack after hack videos and no one made me “get it” until I watch this! Thank you!!

Your voice is so relaxing. Best layering video I've seen so far! Thank you

@MakersGonnaLearn

2 жыл бұрын

Yay! Thank you.

This was the best layering video, I have watched! Thank you so much for making it easier to do multiple layers.

Watching your videos makes working with the Cricut soooo much easier for a beginner. I've really learned a lot and took plenty of notes!! Thank you so much for the illustrations.

@MakersGonnaLearn

4 жыл бұрын

You are so kind! Thank you so much for your kind words!

This was fantastic!!! I've had my maker for over a year and I've been intimidated to do anything other than the basics. This will enhance my skills!

@MakersGonnaLearn

4 жыл бұрын

It definitely will! We're so glad we're able to push you out of your box! :)

Absolute life changer when it comes to layering vinyl. I was trying to figure out how I was supposed to line up all my layers of colors. Thank you so much. My anxiety level is much lower now 🤪

@MakersGonnaLearn

3 жыл бұрын

So glad we could help, Amanda!! :)

Love, love, love this hack .. such a time saver . Thanks Tanner

Thank you for going slow and saying each step so well .... love this hack!

@MakersGonnaLearn

4 жыл бұрын

Thank you so much for watching Bianca 💖

I new at this and OMG! The way you teach is amazing, your voice is so soothing and you explain how to do this so nicely. Thank you so much! I will give this a try.

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

Thanks so much Tanner!! I watched other videos and could not get it! Then I found yours and I am now able to layer vinyl! You are the best! ❤️

@MakersGonnaLearn

2 жыл бұрын

Great to hear!❤

This is perfect! Thank you! So easy!

Not only is this video very informative but Tanner's voice is so soothing. I could listen to him read the ingredients on a shampoo bottle.

@MakersGonnaLearn

3 жыл бұрын

Aww!! Thank you so much!!

Just the perfect tutorial I was needing. Explained very well, shows me the steps and easy directions. Couldn't ask for a better how to, thank you guys

@MakersGonnaLearn

3 жыл бұрын

Glad it helped!

Thank you so much! I don’t know how I didn’t find this sooner!

What a great tutorial, took the fear out of multilayer vinyl projects , thanks so much❤️

@MakersGonnaLearn

4 жыл бұрын

You are so welcome! We're so glad to hear that! Thank YOU for watching and commenting!

Wow!!!! I absolutely LOVE this tip!!!! I am a cricut/vinyl newbie and wasn’t really sure how to do the multi layer vinyl. But I’m excited to give it a try now using your hack. Thank you so much 🙌🙌

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching 😊

Thanks for this tutorial. It was simple and to the point and I’ve now made my first layered vinyl.

@MakersGonnaLearn

4 жыл бұрын

Yay! We're so glad this was helpful for you!

This was so helpful! Just did a 2 layer project as I am a newbie and wish I had seen this first. All I could say was "Brilliant" as I watched it. Thank you!

@MakersGonnaLearn

3 жыл бұрын

Glad it was helpful!

Thank you for this video! I like that you show different methods ( I also watched the other video on multilayer tricks). It definitely helps me figure out which method works best for me and the project I’m I’m working with!

@MakersGonnaLearn

3 жыл бұрын

Glad it was helpful! You're so welcome!

OMG!!! You saved me several days of anxiety for a multi layered project I have for a customer. This was and amazing tutorial. Thank you, thank you Tanner 😘😘😘😘

This has been so helpful! You are a great teacher! Thank you!

@MakersGonnaLearn

4 жыл бұрын

Thank you so much! You're so sweet!

Thank you so much , I greatly appreciate you taking the time to teach us .

@MakersGonnaLearn

4 жыл бұрын

Thank you so much for watching, Darlene!

Thank You❣️ So easy to understand and I’ve learned an immense amount of info in 1 tutorial.

@MakersGonnaLearn

4 жыл бұрын

Yay!

Seriously!! Such a good tip!!! Question would be how do you know which ones to layer in what order after the first one? Especially when you get into like a 5 or more layered project

@catherineshearer5829

2 жыл бұрын

I got so excited when I saw your question because I was assuming somebody answered it. This is what I am struggling with how do you know what layer goes 1st

OMG! That hack is amazing, this will make my life so much easier. Thanks Tanner

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching 😊

Awesome Job! Your videos give me so much confidence as I just bought my first cricut three weeks ago! Thank you and keep the videos coming! 😊😊

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching!

My mouth dropped open when you did this! Wonderful! Thank you for sharing! Onto my next MGL video tutorial...

@MakersGonnaLearn

3 жыл бұрын

You are so welcome! Thank you for your kind words!

Thank you so much for this amazing video! Love the shape method! Makes it so much easier and fun. 😊

@MakersGonnaLearn

4 жыл бұрын

You're so welcome Linda, Thanks for watching!

Thanks again, Tanner! I love your tutorials!

@MakersGonnaLearn

4 жыл бұрын

Aww, thank you!

AWESOME tip/trick!! I am absolutely going to try it . I am sure it's going to make my experience with vinyl projects so much more FUN and SUCCESSFUL!! I really DIG your Vids!! They're always full of great TIPS, TRICKS & IDEAS!! So happy I found "Makers Gonna Learn". Thank you so much for sharing with us and especially the INSPIRATION!! Arlene

@MakersGonnaLearn

3 жыл бұрын

Have fun! Thank you so much for your support!

Adding a registration mark...just what I needed. Thank you for saving me a lot of frustration!

@MakersGonnaLearn

3 жыл бұрын

No worries!😀

This video helped me save vinyl! Thank you!

I use circles. I use 3 circles per layer which gives 3 points to align to. 2 stars per layer also works well.

Love it!. I like using the hexagon better than a rectangle. Seems like it will be much easier.

@MakersGonnaLearn

4 жыл бұрын

It is! Thanks for watching and commenting!

Thank you so much for this video. I will be trying this tomorrow. I’ve been really nervous about doing multi layer vinyl. I hope to have the same success as you did. I think I need to try a simple design with maybe only 3 layers. Thank you for a great video

@MakersGonnaLearn

3 жыл бұрын

You are so welcome! Thank you for your kind words!

Thank you!! Now I think I am ready to tackle my first layering project!

@MakersGonnaLearn

4 жыл бұрын

yes! You can do it! You will have great success, I just know it :)

I just wanted to say thank you so much for making this video! It was so easy to follow and I frequently reference it as I am still learning

@MakersGonnaLearn

2 жыл бұрын

You are so welcome! I'm so glad!

Brilliant! That makes layering so easy! Thank you.

@MakersGonnaLearn

4 жыл бұрын

Awesome! Hope you can try this too :)

Im definitely going to try this. Thank you from England.

About to do my 1st project and your explanation made it sound so easy!! Thank you!

@MakersGonnaLearn

3 жыл бұрын

You can do it! We're so glad you enjoyed this tutorial!

I’m squealing with excitement watching these while I play with my cricut.... I feel so old and so young at the same time lol

@MakersGonnaLearn

3 жыл бұрын

Awe! We're so happy to hear you're excited! Congrats on your Cricut!

Omg this was awesome THANKS!

Great video, thanks so much!

you are the best!! That makes it so easy I just had a crazy one that I made ok, but not great. My next will be much better!

@MakersGonnaLearn

4 жыл бұрын

You're so sweet Lorilynn, Thank you so much for watching :)!

thank you so much, you did great. I cant wait to try my first multilayer pic

@MakersGonnaLearn

4 жыл бұрын

Thank you so much!

I’m definitely going to try. You’ve been very clear. Thank you.

@MakersGonnaLearn

8 ай бұрын

You're welcome!

This was so helpful. Thanks. I'll rewatch it again before I do a layered project.

@MakersGonnaLearn

3 жыл бұрын

You're so welcome! Thank you for watching and commenting!

Wow! This made it all make sense! Thank You!

@MakersGonnaLearn

4 жыл бұрын

Thank YOU for watching and commenting!

This is an amazing video!!! The best one yet! Thank you!

@MakersGonnaLearn

4 жыл бұрын

Wow, thank you! You're too sweet!

Fabulous video -- a real game change for me. I'm new to layering vinyl. Thanks so much!

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

I would cover the entire design except for the Hexi with the back of the transfer sheet so the layer I am attaching does not stick accidently. Then when the Hexi is lined up , you can lift the transfer sheet remove backing covering the design and lay down the layer. I believe it is called the hinge method

@MakersGonnaLearn

4 жыл бұрын

Sure! Feel free to do this however you like :)

I’m a new member and this is the first time I’ve understood layering! Thank you

@MakersGonnaLearn

3 жыл бұрын

We are so happy to have you! You are so welcome!😊

What a game changer! Thank you Tanner, I am just getting started with my Cricut and your videos are always perfection!!

@MakersGonnaLearn

3 жыл бұрын

Thank you so much for watching!😀

@taradunn7467

3 жыл бұрын

OMG this was awesome ! I was so scared to try multiple layers because I don’t always have a steady hand and this just changed the game for me

Tanner this is fantastic!! Can’t wait to try this awesome hack. Thank you!!😁

@MakersGonnaLearn

4 жыл бұрын

Yay!

Great hack, this will make layering so much easier. Thanks!

@MakersGonnaLearn

3 жыл бұрын

You're so welcome!!

This was perfect thanks!

@MakersGonnaLearn

3 жыл бұрын

You're welcome!

Wow - this is a great tutorial! Tanner you are an awesome instructor!

@MakersGonnaLearn

3 жыл бұрын

You're so sweet! Thank you, Cheryl!

That's awesome! You make it look so easy. Thank you so much! Your videos are so easy to follow❤️

@MakersGonnaLearn

Жыл бұрын

You are so welcome!

I just got my joy and my explore air 2 and found your video. It helped me so much. Thank you.

@MakersGonnaLearn

3 жыл бұрын

Woohoo!! If you’re looking for more beginner Cricut training we have a new course free to all yearly members that is designed to teach beginners how to use your Cricut. From opening your Cricut, to terminology you need to know, to the ins and outs of Design Space, to making your first project, we walk you through everything in our 30 Days To Master Your Cricut course. Join today for $20 OFF using code “MAKE” at checkout!: bit.ly/mgl-join

OMG THIS IS GOLDEN!!! THANK YOU TANNER THANK YOU!!

@MakersGonnaLearn

Жыл бұрын

You're welcome!

THIS IS SOOO AWESOME! Thank you so much! I learned so much from this video!

@MakersGonnaLearn

2 жыл бұрын

You're so welcome!

This was so so helpful!!! Thank you!!!

@MakersGonnaLearn

4 жыл бұрын

You're so welcome! We're glad this video could assist you! :)

This is such a great trick! Have not seen this. Thank you. Awesome.

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching 😊

Wow, this made it so simple to understand. I love watching your videos :)

@MakersGonnaLearn

3 жыл бұрын

I'm so glad! Thank you for watching and commenting!

Thank you! This video was very helpful!

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching 😊

Oh my gosh! So awesome!!! Thank you!😀

@MakersGonnaLearn

4 жыл бұрын

Thank YOU for watching and commenting!

Thank you 😊 very helpful!

Love this hack Tanner! I've been wondering how to do layers!

@MakersGonnaLearn

4 жыл бұрын

Yay!

This was awesome and answered so many questions! Thank you!

@MakersGonnaLearn

3 жыл бұрын

You are SO welcome! Thanks for watching!😊

Thank you for your videos! So helpful!

@MakersGonnaLearn

3 жыл бұрын

You are so welcome!

Very cool! Thank you.

🤯 Love it. Thank you!

@MakersGonnaLearn

4 жыл бұрын

yay! Thank you for watching!

You are WONDERFUL! I am coming over from the crochet world, and I'm quickly learning from your videos that you're the Mikey of the Cricut! :) I've subscribed, and I'll be back for more tips! (The thing I like to make on my Cricut the most is earrings!)

Great tip! Thanks! Love your channel!

@MakersGonnaLearn

3 жыл бұрын

Thank you so much for your love and support!😊💖

Wow life changing !!!

I was so confused with the shape at first but now... aha I got it genius thank you

I just started my own business and this video helped so much! Thank you 😇 you have gained a new subscriber ❤️

@MakersGonnaLearn

3 жыл бұрын

Awesome! Thank you!

Thank you Tanner!! You are amazing!!

@MakersGonnaLearn

2 жыл бұрын

You're so welcome!

Thank you so much for this!

@MakersGonnaLearn

4 жыл бұрын

You're so welcome!

Thank u I want to try the hexagon method makes it looks so easy

@MakersGonnaLearn

4 жыл бұрын

Thank you for watching 😊

Oh my gosh…what a great trick!!

Thank You so much!!!!! Awesome video!!!!! Wow!!! This will help me so much!!! Thank You 😊

This is awesome! Thank you!!!

@MakersGonnaLearn

4 жыл бұрын

Thank you so much! :)

This is the best video I've seen yet for newbie's. I will def subscribe and visit your site. Thank you!

@MakersGonnaLearn

2 жыл бұрын

Thank you so much!