2 RIDICULOUSLY Easy Ways to Layer Vinyl (HTV) on a T-shirt
Тәжірибелік нұсқаулар және стиль
Are you ready to upgrade your heat transfer vinyl game from monochrome to a multi-colored masterpiece? Then watch as we guide you step by step through the two easiest methods for layering HTV to create designs that pop off your garment with color and depth, as well as maximize your profit.
Check out this video where we go in depth on how to use our software and the vinyl cutting process • Using a vinyl cutter &...
Learn more about Ricoma’s heat presses: shop.ricoma.com/collections/h...
If you want to see custom apparel and personalized garments, check out our Facebook group, Embroidery and Printing Business Help: / embroideryprintingbusi...
Follow us on Instagram to view more great videos and tutorials featuring custom apparel masterpieces that you can make from home: / ricomahq
Join the Ricoma newsletter for educational blogs, videos and live webinars: info.ricoma.com/newsletter
00:00 Introduction
1:49 Method #1 Layering during the heat pressing process
5:12 Method #2 Layering on a single piece of transfer paper with registration marks
While vinyl gives you a great deal of freedom when it comes to substrates, it can be a bit limiting when it comes to more complex, multi-colored, and three-dimensional- looking designs. By layering your vinyl sheets with the two methods provided in this video, you can decorate your HTV garments with full creative freedom.
For the first method, you can create two separate transfer sheets and layer your design during the actual heat pressing process. We’ll show you how to set up the design on the vinyl cutting software, make sure that it is accurate, cut, weed, and press it for a pristine finish.
During the second method, we’ll demonstrate how you can layer the vinyl onto a single piece of transfer paper using what’s known as registration marks-which allows you to know exactly how to stack your design during the initial transfer phase. Again, you’ll see step by step how to add the registration marks with the software before we cut, weed, and press the design on your garment for a multi-colored masterpiece.
Пікірлер: 32
Which out of the 2 would you find the easiest? Comment down below!
@jazeelocay4784
Жыл бұрын
I'm gonna go with the 1st method. Thank you for that wonderful videos. it really helps a lot. It's because up to this day I'm still struggling to make two layer htv vinyl.
I’d go with the first method. The stickiness of the 2nd example would surely make wrinkles and bubbles for me!
@ricomatv
Жыл бұрын
We appreciate the feedback!
The second way was the best way ive seen. What type of transfer sheet can i use?
@ricomatv
Жыл бұрын
Thanks for the love! We used the Luminaris 200 Simply-Peel Media Step A & B Transfer Paper (100 sheets of each step A & B) shop.ricoma.com/products/luminaris-200-simply-peel-media-step-a-b-transfer-paper-100-sheets-of-each-step-a-b?_pos=1&_sid=c4a8fc1fa&_ss=r
Is the final decal on the transfer tape? Or was it re-applied to the original backing? ty
@ricomatv
8 ай бұрын
It was reapplied!
@Bustermcfe
8 ай бұрын
Thank you! I tried the second method and had an awful time moving the htv back to the original sheet. I spent an hour and ultimately ruined the project.@@ricomatv
Am I missing something (I am new to this craft) but by putting both on to transfer tape aren't you essentially flipping the HTV so that the adhesive layer is then the wrong way up??
@ricomatv
Жыл бұрын
Hi Kay! That is one way of doing it and the video showed an alternate version!
@kaymitchell6445
Жыл бұрын
@@ricomatv but still, I don’t see how the second option would work as the adhesive side on one layer will be facing the wrong way so won’t stick when pressing?
@kaymitchell6445
Жыл бұрын
@@ricomatv but still, I don’t see how the second option would work as the adhesive side on one layer will be facing the wrong way so won’t stick when pressing?
@Jieunehyi
Жыл бұрын
@@kaymitchell6445 there are 3 sheets, 1st layer, transfer sheet, and 2nd layer. Move the vinyl from 1st layer to the transfer sheet then move the vinyl on the transfer sheet to the 2nd layer. When he moves the vinyl from the transfer sheet to the 2nd layer, the image flips back to the correct way (mirrored). You’re thinking that he moved both layers to the transfer sheet.
can this be done with sublimation vinyl?
@ricomatv
Ай бұрын
Hi there! No, it won't be possible.
How did you make the font cut outs?
@ricomatv
2 ай бұрын
We used Signmaster software to make them. The design was created in illustrator.
How long do you press the second transfer in the first method? Since you are pressing the first design twice while transfering the second/blue design..?
@wigm
Жыл бұрын
They way i've done it is press the first design for a few seconds, just long enough to stick, depending on the brand of vinyl it can be just 5 seconds. Then with the the second design press the whole thing for the full time needed.
@ricomatv
Жыл бұрын
We agree! ^
What vinyl is being used in this video?
@ricomatv
Жыл бұрын
Heat transfer vinyl
@glennford4748
Жыл бұрын
@@ricomatv yes, from what brand?
the first one...
@ricomatv
6 ай бұрын
Thank you for the feedback!
is the software free or is this another thing you have to pay for
@ricomatv
Жыл бұрын
Hi Amber! The LuminRIP Software is included when you purchase the machine.
@amberbernicke7956
Жыл бұрын
I don't know who has that kind of money. Just lying around to be able to purchase a machine like that. Could you tell me besides a business?
Is this washable..??
@RsBigBadMe
Жыл бұрын
Yes it is
@ricomatv
Жыл бұрын
Correct :)