damn look at this harbor freight shopping spree, swivel sockets and everything. i have all the same shit lol so you can lower the tank by about 1.25 inches by just backing out the two star bolts a bit (they have long threads). dunno if that would’ve given you the necessary clearance tho. good vid meng, i always learn some shiz from you

@EvanDaly

2 жыл бұрын

Haha only the highest quality tools for this hopptie😂 thanks bro!

@hithereperson8137

Жыл бұрын

It does give the clearance for anyone wondering ;) (also impact sockets are now being made of the same material as chrome sockets, therefore, use chrome sockets all you want)

@andrewslagle1974

6 ай бұрын

Not so.Impact sockets are made for that purpose(impact)different hardness .You can get away with a standard socket in a pinch but not recommended .Also standard sockets are 12 point and dont offer thed torq needed for frozen fastners and can round the bolts/nuts off as apposed to 6 point impact sockets! @@hithereperson8137

Bro im callin bs on your subscribers u make hella good content keep this up and i grantee u will be huge

Awesome content love the way it sounds man cant wait to get my 3v soon

Love your channel bro keep posting 3V gang 🤟🏾

Quality content brotha 🔧🦾🔥

Bro that launch 🥶

Dope videos bro & your car is clean af

I just saw your later videos. I just got a 3v i wanna learn how to shift like you. It’s my first manual car. I can drive it slow but idk how to bang through the gears

Getting the upper mount in does involve dropping the tank. I think it will only have to come down 3/4inch or so and you may not have to completely remove the two 13mm strap bolts to get enough room. If your car got a certain recall (I don’t have the number) the 13mm bolts were replaced with a “special” Torx cap screw and you’ll need a driver for it. It’s a T50IP. Instructions say only Snap-On has them!? I found one on Amazon and ordered it tonight. I saw several T55 special, spherical cut drivers but I’m not sure that’s the same thing. After a little searching I found one that’s listed as a T50IP. What a dumb headache! First to design the mount so it can’t be removed without dropping the tank and second using a special fastener that takes an almost unobtainable tool. (Rant over)

Good content bro got the same mustang and color

Hahaha...love the Russell Westbrook clip that you snuck in there!

Awesome 👌

Sick ride!!! What is your wheel and tire size??

6:00 I think your brain tried to make you say tension and pressure at the same time. Happens to me a lot lol. Nice video, once again. I don't know if you noticed or not with your car now, but after I installed the rear control arms, my car no longer wheel hops, but spins like crazy. I used to have to seriously want to spin to even get the tires upset. Now, I barely have to give it gas and it will try to throw me into the curb lol. I'm guessing the newer control arms, with stronger steel and bushings with MUCH less deflection then the pieces of garbage that come on these cars from factory, it plants the rear into the ground harder, demanding more traction from the tires. One mod always seems to require another supporting mod.

@EvanDaly

2 жыл бұрын

Lol yeah it wants to spin like crazy I was only like half throttle on the first launch

Whose tune are you running? Car looked really rich during the first launch but seemed to clear up later on. I love BMR’s control arms. Quality stuff for sure. Have you thought about trying their relocation brackets?

@EvanDaly

2 жыл бұрын

Shitty BAMA tune in getting a Lito tune after long tubes😂. I was going to get the relocation brackets with the LCA’s but my car is a little too low I would scrape them getting in my driveway

Can you do a full build list?

Love the content and car. Where’d you get your wheels?

@EvanDaly

2 жыл бұрын

Thanks bro they’re from ESR they’re Cs8’s

Dude are those Borlas sounds wicked af

@chrissgrimble3737

Жыл бұрын

I need those for my 3 valve

I have yet to blow up a chrome socket on my 1/2 high torque yet, you really have to be abusing the socket for that to happen. Most of the time people use cheap or damaged chrome sockets that were already past their prime when the explode

Can you teach me how to upgrade? I also live In Florida with the same csr

How do you have your radar wired in?! very clean look 👀

@EvanDaly

2 жыл бұрын

Thanks bro I just wired in the power wire to a fuse and plugged the fuse into the fuse box under the dash to one that turns on when you put the key in

Get 6 point sockets and get crowfoot wrenches

That stang sounds crazy what do you have done inside the 4.6

@EvanDaly

Жыл бұрын

Just intake and exhaust mostly stock

NewEdge Owner here. I saw that you have BC Racing CoilOvers. Is the ride quality decent or good while being slammed to the “ground” I’m on some cheap Ebay Coilovers & wanna upgrade so I can be low & comfortable.

@EvanDaly

2 жыл бұрын

Tbh when the dampening is set pretty low it’s comparable to lowering springs and stock shocks but definitely not an uncomfortable ride i daily it with no problems

@muffintv6273

2 жыл бұрын

@@EvanDaly appreciate it

Whats ur tire setup mane nice stang frfr💯🙏🏿

@EvanDaly

2 жыл бұрын

Thanks bro I’m on Achilles atr sport 2’s 245’s

Also i always see mustang launch control rather high

its so fucked up that you dont have millions of fans.

How reliable is the 3v I wanna get one to drift and slide in the rain I want it to be reliable tho

@EvanDaly

2 жыл бұрын

It’s my daily and I’ve had it for 3 years only problem I’ve had was my clutch but pretty reliable

How do you set the pinion angle???

@jtokidjb

Ай бұрын

He has no clue 😅

more 3v content broo

What camera do you use

@EvanDaly

2 жыл бұрын

GoPro hero 7 and iPhone 12 Pro

these junk ford cars are nnot made for this abuse! kids nowdays!!!! tear up everything!