For more information about the SBA3 pistol stabilizing brace from SB Tactical, visit my full written review: twangnbang.net/2018/04/sba3-pistol-brace-the-hottest-new-ar15-accessory-ever/

And this is what happens when you let people write laws that know nothing about firearms

@TWANGnBANG

6 жыл бұрын

Precisely.

@GrumblingGrognard

5 жыл бұрын

lol, the form of these laws was 100% caused by the "conservative gun lobby". This is fact. Look it up. This is all public record and easy to find. The law(s) were altered, by the "pro-gun lobby" trying add exemptions...and they were successful in doing that and making it a pain in the ass for everyone (also part of the plan if you ask me, so "good conservatives" could continue to bitch about the law the "liberals made"....because they know they are too lazy/stupid to do any research themselves). [note: if the "pro-gun" lobby had NOT done this, the law would be MUCH more restrictive so either vote people into office that will take another look at the laws or shut the hell up]

@Superman-xr1oh

5 жыл бұрын

@@GrumblingGrognard Liberals are responsible for most of the crazy gun laws in CA

Can we all just recognize, that this is a SBR and because of this brace being legal via the NFA, the NFA is outright pointless and needs to be abolished completely?

@9999plato

6 жыл бұрын

Until a Dumbocrap get in office and instructs the ATF to reverse its rulings again. Then we will be back to paying for SBRs.

@davidstewart4594

5 жыл бұрын

The lower receiver has to start life as a pistol or an other.

You guys have some stupid laws, if it walks like a duck, looks like a duck, quacks like a duck, TECHNICALLY its a modified chicken

@TWANGnBANG

6 жыл бұрын

It’s more stupid to have to do this in the first place instead of just having an SBR free from hassles.

now days the accessory you need is a good lawyer.

@TWANGnBANG

6 жыл бұрын

That’s funny and sad at the same time.

It's a wristol......no, a pifle.....

@TWANGnBANG

6 жыл бұрын

“Wristol” I love it!!

Three years later and this is still the sexiest AR Pistol on KZread. I think what makes it look so good is its simplicity, and the fact that the Aimpoint T1 on the LaRue LT751 mount is placed so far to the rear of the pistol, that aesthetically it looks like a small ACOG.

US gun laws make my headhurt

@bandccoresohio

6 жыл бұрын

JellyCarrot same here but englands make my head hurt worse and Australias make me sick to my stomache

@ParanoidCarrot

6 жыл бұрын

dick liddle in finland there are the basics no assault weapons for regular citizen, if you wish to own a pistol or rifle/shotgun anybody can own a deactivated one, but if you wish to use one you need to be part of a gunclub or hunting club then get a permit and register yourself as a gun owner, and you need to go to the clubmeetings and shooting to keep your self as and active member or something to that end and the last one you are requred by law to keep your guns in a gun safe or lockbox, and thats the gyst of it, hunting laws are a bit of a pain for what i have heard and researched because i would like to go hunt with a traditional recurve bow but do to some wierdness i havent started to, more research

@jessearmstrong4376

6 жыл бұрын

Canadian gun laws are worst.

@dongambino5308

6 жыл бұрын

JellyCarrot that's actually a relatively smart gun law(s), they obviously want to keep it out of criminal hands yet give the people what they want, kinda like if you want a gun you gotta prove you're a normal member of society type of thing, ofc it's not "freedom" bc you can't just turn 18 and grab a gun but it's sure smarter than saying "no guns" like Australia

@LalitKumar-cu5iu

6 жыл бұрын

JellyCarrot The gun laws are so cool here in India. Bores above 0.375 are prohibited. Automatic and semi weapons are prohibited. For the lower bore pistol, revolver, guns, and rifles, you need to get arms license. All the best getting one... haha

Nice pistol ~ abolish the NFA!!!! NO NEW FIREARM RESTRICTIONS!!! Stand your ground ladies and gentlemen!

Twang n Bang is part of the indispensable core of my subscriptions. It’s time I sign up for the newsletter!

@TWANGnBANG

6 жыл бұрын

Thanks!

The key phrase in this video that everyone should take into consideration is "don't tell anyone!".

If you have a 2 position commando buffer lying around I recommend using it. It can go to the last position on it and slightly increases length of pull. And it is legal I measured it and it extended the length of pull from about 12.4 inches to 12.9 inches, so it's still well under 13.5(Which isn't necessarily illegal to surpass but they said it's a grey area".

Haha! I do the same with all of my lowers as well. First step is to always turn them into a pistol, photograph, then put a stock and rifle upper.

Lol. Ban the ATF!

@kencampbell6721

6 жыл бұрын

Ban Democraps, problem solved. Ok toss in banning a few 'republicans' too.

@GrumblingGrognard

5 жыл бұрын

yeah, that is EXACTLY what I expect from you "well informed conservatives"; blame the messenger/enforcer of the law YOUR LOBBY WROTE.

Pistol rifle pistol rifle pistol rifle, but not... Rifle pistol rifle pistol rifle pistol!! El stupido

@TWANGnBANG

6 жыл бұрын

Exactly.

@thesuperzfamilyvlog6607

6 жыл бұрын

This made me laugh harder than it should have...

@s3ntin3l60

6 жыл бұрын

Kevin Roberts it's an enigma.

@JLH1956

6 жыл бұрын

What's stupid? I have an ar15 with a 16 " barrel and it's considered a rifle. At what length can I call it a pistol and be legal? DO you know that?

@kevinroberts9580

6 жыл бұрын

J H if your Barrel is less than 16 in overall then it is either a short-barreled rifle with a tax stamp and a lot of paperwork, or it can be a pistol with a pistol brace and have the same rules as carrying a pistol which means you can carry it across state lines without special paperwork and permission. Another idiotic rule. Your Barrel can be less than 16 in as long as it has a pinned and welded muzzle device that makes it 16 in overall. I built a 10.5 in. 300 AAC Blackout with a pistol brace because I didn't want to go through all the trouble and the money for an short barreled rifle. I hope this helps

I originally only watched the first half of this video when it came out because I had no intention of ever purchasing an AR pistol. Now that I have a Ruger AR556 pistol on order, and it comes with the SBA3 tactical brace, I came back and watched the whole thing. Great video and great info!

Provided buffer tube is intentional since ATF has stated that lop beyond 13.5" on braces is in the legal gray area. The buffer tube SB included only goes 5 positions with the normal 6th position removed as that would be longer than 13.5

My pistol has an identification issue and likes to be referred to as zir

Finally, a comprehensive video explaining the bizarre do's and don'ts of AR15 pistols. Thanks

I believe it comes with a buffer tube that has a limited length of adjustment because you are only allowed to have the brace come out so far.

I just ordered a PSA complete pistol Lower including an SBA3 brace and it came in yesterday. I'm loving it. It's exactly what I was waiting for, one that's easily adjustable.

It's a gender fluid rifle-pistol thing? :D

My head just exploded, I'm so confused !! I think I'll stay with my lever and bolt action rifles.

@TWANGnBANG

6 жыл бұрын

I lol'd. :)

@looseballs1966

6 жыл бұрын

I know what you mean brother

@JBDRLSOARK

6 жыл бұрын

It sound like you are assuming that I'll let them be took.

Its a solid stock. You wont be disapointed. If you purchased a stripped lower its labeled as "other" build it how you want.

Great-looking pistol and brace! One pro which you did not mention is that it no longer spins freely on the extension tube like its SB Tactical predecessors. I'm glad you're not just reviewing air guns and crossbows. Thank you for the vid!

Heck yeah! Just got one...I've been drooling over this ever since we saw them at Shot Show...See ya at NRA Cam!

@TWANGnBANG

6 жыл бұрын

I won’t be At NRA.

@TacticalToolbox

6 жыл бұрын

Well.... Nevemind then.... Lol🙄

@user-ew7nz3yw2i

6 жыл бұрын

Drool over a bitch brace? Fuuuuuk.

@nickthompson4022

6 жыл бұрын

Tactical Toolbox i follow you

@IzaacArtist

5 жыл бұрын

Max Um he’s got a shrek mouth, of course he drools

It's a 5 position buffer tube. Standard carbine length is 6. It's technically a pistol buffer tube which is why it comes with the brace. SBA is being VERY careful to make sure these are clearly NOT a stock, they are a brace.

My buddy has a real nice ar pistol with 300blk and it's pretty awesome. Can't wait to get one too. Great video.

@shanebeaudrot777

6 жыл бұрын

So if you did have to tell somebody, I'd think a priest in a Catholic confessional both should suffice. Father, forgive me, for I have changed my AR pistol to a rifle, and without telling anyone, I changed it back to a pistol! I feel so dirty!

When you buy your lower receiver you can have it marked as open or other that means you can change it from a pistol to a rifle or a rifle to a pistol but if you market as a pistol you can’t change it into a rifle and if you market as a rifle you can’t change it into a pistol

Just listening to him go over the features of this stock... uh excuse me, BRACE... makes me smile

Why have I not thought of this before...? You sir are a genius!

Just to let you know, if that "pistol" is over 26 inches in overall length it is no longer classified as a pistol, it is a "firearm", in the same manner as a pistol grip only shotgun. I could be wrong though...

They made a brace for the Mossberg shockwave and Remington tac 14. Can you please make a video on that because there's very little reviews on it?

@TWANGnBANG

6 жыл бұрын

I don’t have either firearm.

@toasty4000000

6 жыл бұрын

Sounds like a problem with an easy solution to me... >:)

@DeeboComing

6 жыл бұрын

TWANGnBANG Think about possibly picking up one?

@mattsterpiecenjmaflva9956

6 жыл бұрын

Blake Patterson just for you Blake...

I am such a fan of your channel! Thank you so much for all the awesome educational and fun videos, I have learned and benefited very much from them!

@TWANGnBANG

6 жыл бұрын

Thanks, William!

If it's 26" inches or more overall, you can put a front vertical grip on it.

Did this to my marauder pistol and my Rex .357 pistol...great lil carbines now

I like how you phrased "stabilizing against your shoulder". Makes perfect sense when you say it like that.

@TWANGnBANG

6 жыл бұрын

Exactly.

i still like the shockwave blade the best because from the side it looks the most like a normal stock. but it is really cool that this is adjustable.

I freaking love these pistol braces for the state of Illinois. Any middle finger I can give to the idiots in Springfield I try to do it. If I didn't already have the KAK shockwave blade on my .300 blk pistol I would definitely get this. Maybe now I need to build another pistol

@jeremywills9303

6 жыл бұрын

Do it. You know you want to anyway.

@strikeeagle345

6 жыл бұрын

I hate it here. Illinois can blow me. What the laws on sbr in Illinois? Need a stamp? Or no go at all?

@Uberragen21

5 жыл бұрын

@@kevinjohnson1139 - If the AR is built as a pistol, you can go with shorter barrels. That law only applies to rifles.

The only way it matters how the receiver started it's life is if that receiver is registered. Here in Texas, we don't have to register our firearms.

Love it. Thanks for sharing your thoughts on the new SB. Can't wait to build my next pistol with one.

THIS VIDEO CLEARED UP SO MANY QUESTIONS ABOUT THAT PISTOL LAW

You did a great job explaining the law for people who may still not understand it. QUESTION: How do you document this ? I’ve got an 11.5 AR pistol in my truck I put together. The Lower was purchased as a Pistol Lower and it meets all the specs. I have ZERO confidence in LE to know the difference if ever challenged and I’m not sure what I could provide from a DOC standpoint that would satisfy if ever questioned. How do you solve this dilemma ?

“I’m new and don’t know what to do !”.... picking up my first AR style Pistol in a few more days, had the burnt bronze added but I have sooo many questions and a few were just answered, thx for the video and confirming my hatred for stupid laws!

I pay taxes so the ATF can let me shoulder my adjustable pistol brace

P.S. i think i saw you on Full30 and i dont think they will cut any of your guys! lol i love full 30 way better then youtube any day!!!

Welcome back! Sorry to hear about your daughter and I hope everything is “stabilizing” with her health, too!

@TWANGnBANG

6 жыл бұрын

Ha! Nice one. :)

BUT if you modify the brace at all it could be seen as you making it into a stock and therefore a SBR so dont modify it

I pre ordered mine from Brownells and installed it a few days ago on my pistol. What a game changer. Definitely will purchase another one.

Wow...great explanation of the law tho. Hey, have you heard of Maven? Ian from Forgotten Weapons recently became a part of it....might be up your alley, although all I now about it is from the video announcement he did

I have a feeling this comes down to concealiblity. If you are 21 and you can buy a pistol you should be able to buy/build a SBR/SBS.

If you buy a stripped lower thats the only serialized part and you do not register it as a pistol or a rifle its a lower its your choice as to which you to chose to let it be, you do not register an upper so they have no way to know what kind of firearm it turns out to be rather its a pistol or a rifle therefore you can convert from rifle to pistol.

@TWANGnBANG

6 жыл бұрын

Stripped lowers should always be listed as “other” on a 4473. Even if an FFL puts something different, it does not make it so. A firearm is defined by what it is originally assembled as, not by what someone wants to label it.

@immikeurnot

6 жыл бұрын

"only serialized part and you do not register it as a pistol or a rifle" Register with whom? There's no federal registration outside NFA firearms. Many (most?) states don't have registration for both, either. It's more common to find state registration of pistols than of rifles/shotguns.

Such an awesome overview of these ridiculous laws, and great review of the product. Always enjoy your content, @TWANGnBANG

The SBA3 is an incredible brace and I have one on mine, love it. Great review with very good information. Thanks.

Should come with the castle nut as well. Not like it would cost them much.

Great advice! I just bout my first ar lower and this video was most helpful.

I have the SB brace on my Scorpion. The best money I have ever spent on an upgrade. It folds to the side and looks well built. The $240 price is too much for some but it's worth every penny.

@TWANGnBANG

6 жыл бұрын

This is only $130, complete with receiver extension. Much more palatable for most.

Great video! Just ordered one. Looks much more comfortable to use than my oak brace. I am going to be building more pistols methinks!

A very clear explanation. 👍👍 Good job.

in Britain pistols are band, but because of the length of it it counts as a short rifle and you are allowed to have short rifles

DAMN, nice timing. *Jörg Sprave* just uploaded a video where he built a buttstock for his FX air pistol :D

Ordered one on sale at Optics Planet last week, but it probably won't ship for weeks knowing them haha nice review! Can't wait to get mine in for review!

its the hottest only because its the only one that can be used with regular rifle buffer tube and its not so expensive.....but its not the most beautiful....it would be nicer if they made the shape of the rear part like the sbpdw .

@Excalibur01

6 жыл бұрын

It's obviously meant to be different than the PDW brace which is 2 pieces of tubes so this kinda reminds me of the Minimalist stock

@EvendimataE

6 жыл бұрын

i said the rear part, that is the rubber part.....the rear part of this sba3 is long....while the rear rubber part of the pdw is a bit shorter making it more beautiful....i think

Can't carry a 5.56 pistol for CCW in CA. I wish I could move from CA and live in the US some day.

Loved the video....just subbed...I agree it is a stupid law....thanks for letting me know I just got a scorpion pistol and was woundering if I could do that

Bout to build an AR pistol just for the reason that I can keep a truck gun with a loaded magazine.

Just ordered two in FDE from Midwest Industries. Listed in stock and I called to confirm May 29th......just say'n

Just make sure your stable when using the stabilizing brace to stable your pistol

Love the ar pistol platform because of the fact you are able to carry it in your vehicle w/ ccw. It's sbr without being a sbr. Gov. Regulation go figure! Well made vid, thanks.

Ok so the ATF says if something can be easily converted to accept a standard stock then it’s illegal and a SBR, hence why people stopped gluing paracord over milspec tubes. If all you have to do to put a stock on it is slide the brace off and slide the stock on, that’s waiting for a constructive intent charge

@TWANGnBANG

6 жыл бұрын

Not true. Here’s what they say about that directly from their website: www.atf.gov/firearms/docs/ruling/2011-4-pistols-configured-rifles-rifles-configured-pistols/download

@BamaPewPew

6 жыл бұрын

I would argue its 100% true. If you take off that "brace" and attach a stock its an SBR, by all accounts. So simply owning an extra stock, and that "pistol" with a carbine tube would qualify as "is made when unassembled parts are placed in close proximity in such a way that they: (a) serve no useful purpose other than to make a rifle having a barrel or barrels of less than 16 inches in length". The juice just isn't worth the squeeze IMO. I have a gen 2 sig brace, and a tube a stock CANT fit on. Its rock solid and in no way would allow a stock on it. I'm just not willing to make the quarter million dollar gamble the legal defense would cost to maybe win in court. ATF also works on intent, so a video of you shouldering this, then you owning an extra stock sure would look like intent to a jury that you planned that platform as shoulder fired. I just really think this is a hornets nest of trouble once we get another democrat President.

@redtra236

6 жыл бұрын

As long as you also have an AR-15 that is a rifle I don't think you could get in trouble for having a stock laying around. Hell you could even have an Airsoft M4 and claim the stock is for that.

Great review video! Been eyeing these since SHOT. Keep it up man!

In Canada it doesn’t matter any AR is restricted and can only be fired at a registered range so we can have a 7” barrel with a brace or a stock or nothing or a 24” barrel and stock can even swap it all around whenever we want but super restrictive as to where we can shoot it no matter the configuration but we can take m1as wherever or tavors out in the bush shooting or the cz 858 all non restricted do laws make sense anywhere ?

I like it! This is a definite game changer!

Optics planet has them in stock, $123 shipped with code WORK7. Black and FDE.

@loonytik25

6 жыл бұрын

You might want to click the "Check availability" link. It says 13-22 days. I pre-ordered mine after shot show from Opticsplanet and still haven't seen it ship.

@TWANGnBANG

6 жыл бұрын

Pre-order is likely the only way you’re going to get one.

@loonytik25

6 жыл бұрын

What is the actual buffer tube length? I'm planning to build a pistol with an 11.5 inch barrel and hoping my OAL hits 26 inches with this brace so I can use a vertical foregrip.

@zexnynex777

6 жыл бұрын

Loonytik I ordered a warcomp and warden from them 2 yrs ago n got my money back with no explanation 3mnths later. They do stuff kinda weird sometimes with hot items. Makes them seem relevant I guess

@usmcxx1775

6 жыл бұрын

Still waiting for mine from optics planet. How much longer!?!?!? Geeze

All these versions of braces have proved how useless and unnecessary the NFA act is. Add to that the necessity of hearing protection that suppressors provide. Yet a Republican president, Republican house, a Republican Senate and the NRA won't even push through the HPA or SHARE act. Smh

@TWANGnBANG

6 жыл бұрын

I agree 100%.

@redtra236

6 жыл бұрын

The barrel length laws are beyond retarded anyways. Do they honestly think a criminal doesn't know how to change an AR buffer tube or upper receiver, or even how to use a hack saw? like wtf it only applies to people that obey the law it would take like 15 seconds to attach a stock/change the upper on a rifle to a pistol upper.

@ChrisShepley

5 жыл бұрын

As a democrat who also pikes guns, obviously, both parties are insane on this issue. Just because a suppressor was originally marketed as a silencer does not mean it makes a gun silent. Make guns ear safe with maybe a minimal decibel level, but just deciding that any muffling device is legally a silencer is ridiculous. Hollywood level silencer sound takes a 22 with additional sound suppression beyond the suppressor itself. I mean custom fitted dynamat type insulation around the action itself in addition to a wrapped suppressor with subsonic ammo.

@ChrisShepley

5 жыл бұрын

@@redtra236 it doesn't matter in any case, people are not born murderers. Most mass shootings are perpetrated by people using legal guns because it is very difficult for the type of people who do mass shootings to gain access to a black market firearm. And most other firearm homicides are done using handguns. Anyhow, the majority of gun related deaths are due to suicide. And we do nothing to check up on the continual mental health of firearms owners. Canada background checks their restricted license holders everyday. They do not have castle doctrine laws, which is problematic (not personally for stand your ground, ymmv), but they have a relatively high gun ownership rate but a much lower gun death rate, even adjusted for population and ownership levels.

@ChrisShepley

5 жыл бұрын

@@redtra236 also, takes at least five minutes to attach bump stick to AR platform if you don't want all your springs to fly about. I'm not arguing for or against your position, but embellishments do not help on either side of debate.

If the overall length is greater than 26 inch, and it was built from scratch. You can even put a forward grip.

@TWANGnBANG

6 жыл бұрын

Yes, but then you built a "firearm" and not a pistol or a rifle. The law on what you can do with it from there is grey.

But if you go to A rifle from a pistol you better have a 16 inch barrel or longer . So if you have a pistol with a barrel under 16 inches you cannot remove the brace and put a carbine stock on there that would be illegal

and here I thought he was gonna talk about a new trigger or something.. I ordered mine around a month ago and it's not expected to come back in stock, let alone ship out, for another week or so. aLsO, the lower I ordered started life as a "firearm" if I remember correctly. So does that make it ok for me to not have to change out my buffer tube? If not, I guess I'm just gonna have to be a felon because I don't have the tool to take it off... or the will power to care...

So when you say "started life" you just have to buy stripped lowers that are registered as "receiver" vs "rifle" correct? The dealer selling it you should know what it is registered as right?

@TWANGnBANG

6 жыл бұрын

All stripped lowers should be registered as “firearm” on the 4473. Regardless, the law specifies the lower is classified as the type of firearm it is assembled into, not what some piece of paper says it is.

I had no idea that there was a difference between an AR rifle upper and a pistol upper. Or am I just confused?

@TWANGnBANG

6 жыл бұрын

Length of barrel plus type of lower you intend to install it on makes an upper a “pistol upper” versus a “rifle upper.”

Great video and great info! 👍👌👊

The only thing they did by forcing us to use the brace to shoulder the firearm is instead of a solid stock that gives a solid contact surface we have a semi wobbly rubber surface that is not as sturdy, thereby reducing overall control which actually is worse for accuracy. Thanks, big government!!!

When I assemble my firearm, no one is ever by me. So wouldn't it be up to the prosecutor to prove in which order I installed my brace or stock?

@TWANGnBANG

6 жыл бұрын

If all available evidence appears to show it was a rifle first, then a pistol second, it will be on you to prove that was not the case. It is clearly not a high enforcement priority, but it's still important to know what the law says and how easy it is to comply.

@redtra236

6 жыл бұрын

Unless they had ran the gun's number when it was in rifle configuration then later ran it again after it was configured as a pistol there's a 0% chance of getting caught assuming it was built from a stripped lower listed as "other".

@InkwellFoto

6 жыл бұрын

Garrett - that's what I assumed. Mine are all others

Great stuff as always thanks! Have you checked out the CMMG Mutant... it's also a "pistol"!

The NFA needs to go away, this is so stupid. When you pick up your new lower receiver just register it as a pistol then you have all your bases covered in all freedom-loving states.

@TWANGnBANG

6 жыл бұрын

If it's stripped, it is supposed to be registered as "other" on the 4473. It is neither pistol nor rifle until assembled as such.

@Uberragen21

5 жыл бұрын

That's why I built my first AR.

@Superman-xr1oh

5 жыл бұрын

@Mike H You're 100% correct. I always love it when someone says they're going to move to a free state. Makes me laugh.

You are overtaking Hickok45 as my favorite channel! Loved the video.

Just ordered. Thanks

putting arm brace on shoulder even though BATF says it is ok all depends on your local cops. have had cop throw a fit when he saw me putting shotgun shells in a taurus judge, "shotguns have to have a 18" or longer barrel"

@TWANGnBANG

6 жыл бұрын

Yes, you can always run into Barney Fife, but they’d be wrong, and you can sue for violating your civil rights.

@nrm3247

6 жыл бұрын

As far as i understand a local leo cant charge you with breaking federal law. They can only detain/apprehend and contact federal authorities to charge you. Most aren't concerned with the configuration of your weapon unless youre commiting a crime with it. Then, you get the added dimension of federal charges in addition to whatever state or local laws youve broken. At least thats what ive been told by a couple of leos at my gun club.

So if I build an AR pistol and use an SBA3 at the get go it's all good right? Since it's a Mil-spec receiver extension. I want to start off as a pistol and not a rifle. Yes these laws are silly...

Great knowledge in this video. I was always confused about this!

How was this work with california laws? Could you still have a detachable magazine and a pistol grip with out getting in trouble by the rifle laws for california (no detachable magazine nor pistol grip)?

Please can you do a video on the foxtrot mike hybrid lower!!! Also wondering if it will take multiple uppers, I haven't seen it with anything other than their own upper. So maybe a palmetto pr whatever you have with a rear charging handle instead of the side.

What make and model is the particular pistol used in this video? Looks amazing.

it's not new, but the hottest accessory you have there is np3? charging handle. I need new charging handle, but I'm still using my np3 by axts.

could you do the build vid and post on full30? keep up the great work

Your rifle is beautiful man.. Do you have a video w/all the parts and links???

@TWANGnBANG

5 жыл бұрын

I used to, but KZread recently banned any video that shows how to make a firearm, so I had to delete them.

As always awesome video👍👍👍

TailHook 2 is nice but almost twice the price. This really is a game changer. ordering mine tonight.

The only concern I have is if adding the shoulder strap is going to be interpreted as "modifying." Most of the videos I have seen on the whole pistol brace issue seems to indicate if you use the brace in its original configuration it is ok, but any modification to it is considered making an sbr. Again the legal "framework" if we can call it that, is so convoluted that who knows whats legal and illegal. Tgats why I am just stayibg away from pistol ar's all together. Rather be safe than sorry.

@TWANGnBANG

5 жыл бұрын

The brace has a sling cup- it was not modified in any way. People have been carrying large hunting pistols with slings for over 50 years. That's why S&W includes sling swivels on their largest handguns. www.smith-wesson.com/firearms/performance-center-model-460xvr

I want to make sure I have this right. So if you buy an AR Pistol, you can at that point place a regular buttstock on it and take the pistol brace off?

@TWANGnBANG

6 жыл бұрын

Depends on the length of the barrel you have mounted on it. If it’s at least 16” long, then you have a rifle. If it’s less than 16” long, then you have a short barreled rifle that must be first registered with the ATF before you make it.