Do you want to learn how to stabilize rough natural edge wood and an epoxy inlay with a laser or CNC to make this honeycomb charcuterie board. Then this video is for you. I'm going to show you how to take a live edge diagonally cut walnut slice with cracks, knot holes and even some punky soft spots and turn them into this gorgeous honeycomb charcuterie board.
You will want to let your customers know that you should never cut on epoxy. Everything we used in this video is safe for food contact but cutting can damage the epoxy. Little pieces could scratch off get into your food. I generally give a sample of the all natural wood finish seen in the video as well as a care and maintenance instructions.
Subscribe to our FREE newsletter on our website for a free honeycomb design .PDF file to use on your laser engraver and an example of a Care and Maintenance Instructions at jobemacstudios.net/newsletter-1
Get access to all our FREE tutorials, projects and resources for laser, cnc, woodworking and resin pouring.
Have more questions? Feel free to comment below.
Don't forget to give us a thumbs up and subscribe to our channel so you never miss more helpful tutorials like this one. Your support is greatly appreciated.
YOU MIGHT ALSO LIKE THESE TUTORIALS
How to Remove Bark from Wood ~ • How to Remove Bark Fro...
How to Mix Resin ~ • Beginners Resin 101: M...
How to Remove Surface Bubbles from Resin ~ • How To Remove Air Bubb...
What Wood Finish Should I Use For Charcuterie Boards ~
• What Wood Finish Shoul...
FIND ME HERE: ~ Website: jobemacstudios.net/
Instagram: / 1elephantmemories
Facebook: / 1elephantmemories
TikTok: / elephantmemories
Materials:
Links marked with * are affiliation links with products that I love and use all the time.
Hard Wood with tight grains like maple, cherry or walnut
* Epoxy Resin (We used Penetrating Epoxy and Thick set Epoxy from Totalboat)
Use this link to order from Totalboat
www.totalboat.com/elephantmem...
* Pigment or Mica Powder (we used Imperial Gold by Eye Candy Pigments)
Use this link to order pigment powders eyecandypigments.com/elephant...
* Wood hydrator and conditioner (we use Bumblechute Wood Serum and All in One Wood Conditioner)
Use this link and coupon code "ElephantMemories" to get a discount on your entire order of wood conditioning products www.bumblechutes.com/?ref=1el...
Sandpaper (80, 180, 220 and 400 grit)
Silicone mixing cup
Silicone stir stick
Flex Fix Duct tape
Toothpick
cloth rags
PPE (Personal Protective Equipment)
Respirator rated for chemical fumes
Nitrile gloves
Eye goggles
Dust mask
Hearing protection
Tools:
Old Chisel
Mallet
Hand Sander
Air Compresser with nozzle
Butane Torch
Plastic Risers (I just use tops to my Stoks iced coffee)
Bubble level
Laser or CNC (We use an Epilog Laser Mini 50 Watt with settings of DPI=400, Power = 100, Speed = 35 with 3 passes)
Disclaimer & Copyright ~ Unless explicitly stated, this not a sponsored video. All opinions are honest and my own.
#woodworking #fixthis #epoxy