Casey, you need to swap out the oil pump and also pan they sell a rear mount conversion oil pan. It has a conversion for it for rear drive. The oil pump is the weak link on the K 24 because the chain that drives the oil pump I think they convert the K 24 pump to a K 20🤔👍🏼😊❤

@JohnKing-qh8zr

5 ай бұрын

Tf works ftw. Jimmy oakes has a pretty informative video on it he did the same swap with his 86 but i believe he used a different transmission.

@kingp00

5 ай бұрын

probably want to use the k24 pump with solid mounts, it's going to buzz like crazy with the k20 pump. k24 pump will be fine for standard redline...

@lostmoneygarage687

5 ай бұрын

They only change the pump to be able to rev to 10k. You are right about rear wheel drive oil pan though. The baffling is different so it doesn't oil starve the motor on acceleration. Honda head here.

@Chriscosner1810

5 ай бұрын

Hopefully get set a new Fly wheel Out to you fast, they told you in the beginning that it would only be 7 days and it turned in the 7 weeks. Let's keep our fingers crossed it don't happen again

Glad you picked up the Accord because it's been like 3 weeks since you added to the fleet.😆

@CaseysCustoms

5 ай бұрын

😂😂

Thank you editor cop guy, the videos are great!

@CaseysCustoms

5 ай бұрын

Don’t give him too many compliments it will go to his head.

You got more done in 1 video than I did in 2yrs of AE86 Coupe ownership. I’m in the middle of K24 swap too w/W58….no cutting. You earned a sub with this one.

Casey,your my hero, you love's problems ,put me to cry. ❤

Get the car level on jack stands and then put a level across that flat plate across the top of the transmission side-to-side. That should get the "tilt" of the engine pretty close, I think.

@CaseysCustoms

5 ай бұрын

That’s what i did 👍 i have a magnetic digital angle finder that is worth it’s weight in gold for stuff like this

Casey... if you're running solid engine mounts, you don't want a rubber transmission mount as the engine mounts will crack! Cheers. Leigh in Scotland 🏴󠁧󠁢󠁳󠁣󠁴󠁿

@ryandavis3826

5 ай бұрын

Also.... You don't want solid motor mounts!

Please reweld the original floor as much possible and use the top mount shifter kit

I can already tell this is gonna be a banger. Keep up the hard work, love the videos!

Love your videos brother. Excellent content!

The car just looks like it opens itself to a convertible conversation. It could make a cool video.

This just became my favorite channel just because there's love for all cars domestic or import. CB7 for the win they're the best accords!

Your builds are badass! Excited to keep seeing the progress.

Love the accord! I had a 4dr but my favorite was the 88/89 body style with the flip up headlights. Love the ae86 of course too!

call it the stir fry because it has ingrediencies rom so many Japanese manufacturers, love the builds keep em comin!!

I'm so glad you understand that all things are better when lowered!!..don't get me wrong. I love jacked up mud trucks on TSL Boggers or Thornbirds but i likes to slam stuff the most

Love the new accord! Cant wait for that build!!!

I'm loving the honda content. So excited to see the final product

Love that green Accord ! Had one back in the mid 2000's that I DE-RICED ! Raised it, put the stock radio and repainted it the same green color. Keep it looking stock outside, slighly lower it and drop in am H22 !!

Awesome Video!!!

Idk what yall got goin on either but I am loving it!!!! My first car was a 90 4 door sedan accord. Love the coupes. Idk what you will do with it but I can't wait too see lol

Nice AE85 you got there. i had an AE88 25 years ago. The LSD and rear discs would be nice. When you get to the springs if you make a notch in the bracket/tab on the strut that hold the brake line you can make it easier to remove the struts in the future since you don't have to disconnected the brake lines to remove the struts. When you lower it a lot you will have contact on the little tab front of the wheelwell to fender. People often put in zip ties through the fender to bumper where you can see then. It's easy and clean to put the zip time on the little flange where you don't see it. I think we both agree clean cars look better.

I look forward to this Channel every day! Made my day

Next project i think must be an RX8 with flat6 Porsche engine :-) this is so freaking creative, i like it!

When you cut the tunnel out and flipped it over and saw the fuel lines I lol'd 😂 only because I could see that happening to me.

@CaseysCustoms

5 ай бұрын

I could of fucking swore they ran in the inner rocker 🤣 that’s what i get for assuming

@DanhPhan

5 ай бұрын

also brake lines T_T

@Jasontodd74

5 ай бұрын

This is the first build I am sitting here going. Huh? This Toyota might be the one and only build I haven't been like "HELL YEA HE IS READING BY MIND!! All the trucks and everything. I think the CRV and the Blazer are gonna be my favorites. I can't wait till their done. Also that 2 Dr accord was my 2nd car in white with a Manuel dropped mine with 18" wheels when that size was unheard of. Think mine was a 1990 and I got in 1992. My favorite car for a long time after I had a Maxima don't remember year but mid to later 90's with the rounder low body already but black in and out, with a 5-speed manual, perfect car. When I was done a friend drove it 10+ more years. Accord went to a friend and a couple years and a small accident and then a little while later an accident that wasn't small at all!!!! I grew up in a family of car dealers and dealerships!!!! Ran threw a bunch of fun cars but after I got done getting like I wanted dad would sell it and on to the next one. Good thing is I never made a payment. Bank held title and did a short note. Sold before ran out of time and started on the next one!!!lol. Its still never ending just slowed down. Don't buy as many as you. If I had 5 none would've be finished!!!!

ATpower has a badass integrated drysump oil system that utilizes the factory oil pump chain, very very compact for a drysump setup. I know it's expensive. However it's cost effective in comparison to conventional external belt drive dry sump systems. I'm excited to see what comes of your motor mount situation pinching the engine, looks like it will be difficult to slide out once unbolted from the solid mount, that ATPower sump may make it slide out easier??? The build is still early and you are putting in work. Mad respect! Good job. I am excited for more!

Looking forward to seeing what you do with the Accord. That was my parents go-to for a long time. If I remember correctly, they had a gray 87 LX-i auto 4 door, black/tan 89 LX-i manual liftback coupe, white 91 LX manual 4 door, and 92 burgundy EX manual 4 door.

So much yes!

Your builds r sickkkk from the old trucks to the hotwheels cars, you do it all luv your videos 🔥🔥💯💯

When you tease Richard makes my day

@CaseysCustoms

5 ай бұрын

Same. lol

Officially my favorite youtuber right now because you have vision and don't give a fu$% and it kinda works 😂

Fiiiinally, this is the first automotive youtuber I have ever seen, actually wearing knee pads on a concrete floor. I have always wondered how all these youngsters didn't get the message from the previous generation about how to make life easier

I'd love to see your vehicles fully done and all the way working 100 percent

If you want to relieve the early 2000s car life, you need to put a ridiculous car stereo in that Accord as well

The seats are out of a Mazda RX8 I need that passenger seat for my RX8. I have the same interior and I’m not too far from you. I’m in St. Louis Missouri I also put a small block Chevy in it

Love your videos brother

My old man has been building big block and small block chevys for.....🤔🤔 ever (he's 82 and started when your first car rolled off the assembly line), and when I started racing a Hond, he loved being able to move engine components around without the need of a crane or hoist.

Hey GunzNButter86 from Massachusetts, and I've always wanted to get one of these 2 door 94 Honda and make it all wheel drive either with Audi parts or Subaru parts!!! Or from a Honda vehicle that would not need a bunch of custom fabrication!!!!! So just throwing that idea out there for you to ponder on!!!!!! Cause I don't have the money and tools or garage and time to build it!!!!! But if I could that's what I would do with that Green 2 door 94 Honda you show in this video!!!!!!!

Great to see progress on the 86. That adapter and clutch look to be a bit Clap.

I want to see more of this and the 2 door accord, turbo accord sounds awesome

cb7 was my first car too! and now i too am crazy about body swapping things. small world. i would love to see it on the channel tho!!

Looking good!!!🔥👍🏾👊🏽

K Twenty Four! Love this engine but the oil leaks that can happen back by the VTEC solenoid are real... been fighting one in that area for 3 weeks! Every time I fix one a new one pops up thats worse!

This on is cool My fav is 1984 Toyota celica gets coupe. No hatchback or convert 22re 5 speed IRS the seats were so ahead with so many adjustments

@user-fh9ul7bk4b

5 ай бұрын

I had an 85 celica GT

Channel is aweome. Love the content!!! Never built a car but plannned to for mannny years and i shall. Love the I don't know what kinda hot rod shop im running around here bit 😊😅 an aweome one if you ask me.

In 2005 ish I had a 89 Accord with the flip lights

I put my engine in from the bottom sub frame off put the engine engine on dolly and lift the car up with your big hoist out side it’s way faster for next time. Great job I love your content I own old Chevys a86 and a crx and a full tip blazer I thought I was the only one who had that great taste

Casey, you definitely need some assembly lube. Get this stuff any tighter, and it will come in very handy. Thanks for sharing with us.

I'm so proud of you for suspending that engine/trans combo with that janky strap . I was waiting for it to land on the floor . I was certain you would have played it off . 😂

Casey.. I love you. This build is awesome!

@CaseysCustoms

5 ай бұрын

❤️

A guy I know has a K20 swapped Corolla. He used a S2000 manifold with a K20 flange for his exhaust. Just had to spread the pipes a bit.

Casey, more videos with the Crx please

Fix the rust & do whatever body work it needs. Those untouched 90s honda's are holding their value

You should of used a ratcheting style box wrench to get those seat bolts out. I bought a Craftsman set from Lowes fairly inexpensive and it's become the most convenient tool making removing bolts like that a quick job..

@CaseysCustoms

5 ай бұрын

I have a set! Damn thing wouldn’t fit under it on the driverside

@williamking9200

5 ай бұрын

@@CaseysCustoms used them when I put Corbeau seats in my Mustang, sat so low and in I couldn't get a ratchet in, those box wrenches saved the day

You need to call those cars "Lil' Rippers" 😁👍

I have been watching for those year that you have been on the u tube I can not remember because of my old age and all but my meds help and Even with my memory problems I have the notice bell on so your videos alway tell me when you have sent one,thumbs up.

Those accords are some of my favorites. Especially the 2 door models. If you’re taking suggestions I think a J series would be awesome in it. I’d assume it has an F series at the moment, those are cool in their own regards.

That Honda 2 door is beautiful

Hell yeah

That thing's so cool. I wonder how long it'll be before you put like an LS or 454 in the Accord!

Casey you need to make a 3rd channel called caseys imports!

They make awd kits for the hondas now. That green one would be a sick awd k24 turbo build ahah thing would be quick😊

Did you get the accord from Lawrence? I was trying to buy it off marketplace too. My first car was a teal 91 accord. Love the videos!

Hondas are super reliable. My 2005 crv is still running at 310,000 miles on it!

@tylerseabook9423

5 ай бұрын

Thanx tips 😂🤦‍♂️ 310k isn’t even that many miles

This will allow more space for carbies and better exhausts. This is what they do here in japan. Straight upright is not recommended/ motor power vs twist i think. Or the top is so high 🤷‍♂️ but common practice is tilted - u can still change that.

It wouldn't be a Casey's custom build without some cutting along the way. Looks like you can shoe horn it in there. Thanks for another great video.

Mannnnn I LOVE those wheels!!!!!

Casey's JDM Shop

We converting you to JDM nice mash up of JDM and American V8 keep up the good content bro loving the ae86 awesome car I missed out on one when I was younger wish I had one now

JDM Baby!!

Nooooo way can’t wait to see you what you do to the cb7 ain’t no way it’s gotta be turbocharged at least

Those are actually rx8 seats they are cool and you should honestly try to resell them because people like to put them in rx7s because of the little rotary logo in the head rest

@CaseysCustoms

5 ай бұрын

Ooh good to know thank you!

This is way better than the crx

the K twenty-four is sitting in there nicely considering how tall it is. plenty of room for forced induction fun, although I would run ITB's and all motor personally

Would you do the inishal d spray job on the car ?

STOKED to see a CB7 on the channel

Casey i think its time for some shop upgrades lol. Cabinets, lights, maybe a mini split a/c

K 2-4!

I enjoy your style. Downside, I watched 3 adds that all was about libido😀🤷🏽‍♂️. Ironically you needed longer bolts for spacers

@kimberlywilliams9757

5 ай бұрын

🤣🤣🤣

@CaseysCustoms

5 ай бұрын

😬😬😬

I wonder I'd you cut the flange off the intake manifold then weld the intake 180 degrees and weld flange back on.

That will be a very fun car to drive lol especially if u boost it

When u take the vidd to Richard tell him he needs better material to use lol love the vids keep up the awesome work

Jspfab makes a full billet mount kit for the k24 to ae86. Little expensive but it’s a nice kit

I love that car I have a blue one

Oil everywhere 😂 way to go dude

@CaseysCustoms

5 ай бұрын

That’s kinda my trademark lately 🤣

@paydroku

5 ай бұрын

@@CaseysCustoms good job anyways

Mazda seats, Honda engine/Nissan trans/Toyota body. Somehow got to work in some Subaru, Mitsubishi, Kia, and Hyundai parts as well for the whole set. Got to collect them all!

@CaseysCustoms

5 ай бұрын

🤣🤣

@twoeightythreez

5 ай бұрын

Many of the OE electronics in Toyotas and Nissans were Mitsubishi, he can do the Scooby Doo part by swapping in an R-200 (IRS) rearend from a Datsun or Nissan car, those are actually made by Fuji Heavy Industries (who makes Subaru!)

a turbo build on the factory f22 would be hella og

I know you spoke to B.Scotto before you got the car. did you see how he made his rad support removable. you'll have so much more room..Im only at the 13 min mark of the vid, so i guess ill just wait and see!

Watch jimmy oaks ae86 k24 build and ktune got the best swap parts from what I hear

I got 99 projects but none ain't done ! 😂

What a bummer

👍👍👍

I don't know what's better, pop up head lights, or a k24

@bernardszybszy603

5 ай бұрын

yes

What would be a really awesome build is to put a flathead v8 in a newer car example a Nissan 240 or a Datsun z sort of a mad scientist build

No offense to you, and also the reason I watch this channel I don't think any of your cars are going to end up at SEMA. You're the real deal man

17:06 Rx8 seats*

I would love to see an LS in that 86. I dont think I've seen one with an LS.

Luv ya.... lol very cool

Hit up bendpak for a set of quick jack for the home garage!!!!

1. This is the TRUEST Japanese (JDM) build EVER!!!! Honda, Nissan, Toyota, & Mazda!!!! 😱😱 Yeah maybe just seats but still counts!!! ❤️❤️❤️ IT!!!! 2. I wish I were your neighbor so I could help you build all of these vehicles!! I’d only ask for 1 or 2 builds of my own. 😂😂😂😂