MG's shine on country roads. Go find one and double your smile. Nice job.

No smoke from the front or rear, No leaks! Great job Migs! Once you get that thing tuned up for the low temps you'll be all set! Just wait until you and your lady hit the road with the top down! Nothing like it!

@karinamargaretbaines7877

2 жыл бұрын

U should use it as it dayly when all sorted

Now that it’s running and driving I’d go ahead and wash, wax, and ceramic coat that paint! Freshen her up 😎 And give the interior a good clean and condition the leather and make it look showroom once more! Keep up the great work!

Excellent work.

Great job! I admire your persistence! Welcome to the world of MGs. Happy Motoring!!!!

Grab 2 Gatorade bottles attach them to a board put a line from bottle to bottle and a line from each bottle to each carb vacume port. Fill both bottles half way and adjust carbs until lvl is even in both bottles

Let’s gooooooo nice job!

You are doing such a great job on this car! Take that carb off, rebuild those SU carbs and she will run great! As other people mentioned, check vacuum advance on distributor.

Can you give an update on when you are going to start painting the entire vette?

@infesting

2 жыл бұрын

Wait you want him to let you know when he is planning on painting it? So instead of just watching the video when he puts it out you want to know ahead of time when you can expect the video of him painting his car. That seems a little weird I mean I can understand asking him when are you putting out the video of you painting the Corvette but it's strange to be asking him when is he planning on painting the Corvette only thing you get to see is the video so who cares when he's planning on painting it you want to know when the videos coming out

@jaiseholland6521

2 жыл бұрын

@@infesting I’m not going to read your whole comment but he’s going to make a video about painting the vette, so I just asked when he was planning on it. I have already watched all of the other vids on him painting the T-tops, however that’s clearly not the whole car. I’m just asking a simple question lol, it’s not that deep

Great job Migs good to get the MG out.keep up the good works.All the best to you all

That is so awesome and I’m so much more proud of you now my Friend !!!!

Maybe try not shifting so conservatively. Some of these old cars like to rev out a little bit. Try shifting later and it will probably not choke up so much.

Hey the reason your rotor cap is not working is because it’s a MSD. Everyone says their hit or miss now a days and your better off buying from NGK or Taylor. The guy that told me about this issue had a Chevy 305 and he said it sputters and sometimes died out of nowhere

Keep it!

🤠 hell yea brother

@Ch00by8

2 жыл бұрын

Hell yea brother

Congrats on the engine build.

It’s looking sweet man. Keep it up.

Check your vacuum advance diaphragm on the distributor to make sure it holds vac and advances the timing.

Strong work!!! Keep it up! Can’t wait to see you rip that MG!!

Grate first drive 🚗 sounds meaty 👍

Sounds great

Nice car man 🤘🔥

The exhaust hanger needs to be loose. As the motor and transmission torque up it will add stress to exhaust at header or manifold. Put a nyloc nut on it just not tight! Good job on getting it going.

I love how when that mg idols it sounds like a rotary 🤣🤣

@Buoyant_Thoughts

2 жыл бұрын

So true, even a rotory with a bridge port.

👍

U should definitely clean up the wiring lol I see it everytime hahahahaha

Cause there must be moisture in the cap itself...

I miss the naskart😭

Its about time he buys a square body

Lets go first like lol

What happened to the firetruck project

Who's that holding the camera

hello

Can we have a toy tour with the cars dirt bikes quads trucks trailers etc

😎😅👌🤙👍

Don't lug your fresh motor. Do a break in series. Bogging? Try richer jetting.

First view first comment first like

@everythingpowersports9604

2 жыл бұрын

I’m trying to figure out who asked?🧐

@therealilxaiden

2 жыл бұрын

@@everythingpowersports9604 nobody did.

First

@therealilxaiden

2 жыл бұрын

Wrong I was I clicked as soon as the noti popped up and I commented the second I clicked on it. Sorry get it next time 😜

@therealilxaiden

2 жыл бұрын

@@a1c3c3u actually no read my original comment I was the very first

The MG makes the Vette look like garbage

On a side note, a lot of parts today are total junk. The original stuff works best and is much better quality! Not everything but you'll be amazed at what's out there, be careful.

That carb setup is your issue. Go original

Just buy a new hanger, they are cheap. I have a 67 MGB

In "74" they put a bunch of emission control crap on the car & lowered the HP to meet American specs. Did you remove that useless shit ?