Excellent product! Excellent review too !

Gracias por los subtítulos amigo 👍

I use it and really like it. It's so easy to apply, ending up with Excellent results! After a preliminary rinse, I use the W4 Citrus in a foam cannon, dwell, rinse, do a 2 bucket wash with W1 GWash, rinse then use the C2v3 as drying agent. I love C2v3, water beads right up, the paint shines nicely. Hit it with Quick Detailer to make it really pop ... Great product line. We have large evergreen trees that aim their pitch toward our car. Tree sap is always a bummer to get off (not to mention bird s**t), but having a fresh coat of C2v3 makes it a lot easier to remove either. I use DIY Detail, Tree Sap Remover and/ or 90% IPA if I catch it soon enough. I need a carport so bad.

Hi Jason that was very convenient vlog as I just ordered some liquid crystal to try here in the UK, my Q though is if I apply this as a sealant for I just spray wax on top there after for gloss finish ? Thanks 👍🏻

How does this compare to the meguiars hybrid ceramic spray wax? I have been using that and amazing results. So far very pleased with durability, protection, water repelling, and self cleaning properties of it. Been about a month and the water still beads up very nicely here in FL just some rain over night cleans the car completely. Also the ease of use is great. Spray on when drying just like you did here. I will be adding the CSL ceramic to my car soon with the EXO.

Just bought this from your site. My roof is wrapped can I use it on there as well?

Hello little question .. if we have a crystal serum ultra ceramic how do we apply C2V3?? with a microfiber or on the bodywork with wiping or others?? THANKS

Is it also applicable to PPF? Is this the same effect with Xpel R1390 Ceramic Boost?

Can you use this on a ceramic coated car would this affect the coating

There is another youtube comparison video with periodic updates that shows this product looking really good compared to some very pricey stuff after a year and a half. I bought some of this as a result.

@vtecaccord96

3 жыл бұрын

Scott H I am sure you are talking about. Really good stuff!

How does this compare to G5?

Just purchased this product to try. I applied Gtechniq CSL ( after watching your detailing vlog vid on coatings) along with EXO and am anxious to see how it performs. I also have a car coated in Adams Ceramic Coating that I'm going to use this on instead of Adams Ceramic Boost for comparison. Great vids Jason!

@noelsaw

11 ай бұрын

How has the combo worked out for you? I applied CSL and EXO V5 recently. It’s pretty impressive so far.

@OgleBilly

11 ай бұрын

@@noelsaw not sure, just applied it last weekend. I have CSL and EXO CV4 on my car and it’s still great! Applied it 3 yrs ago

Thanks for sharing! My truck has a full front end clear Stek PPF & ceramic coated along with the rest of the truck ceramic coated. Looking for the best LSP for maintenance after de-contanination. Question if you don't mind; What's the difference between Gtechniq C2V3 Liquid Crystal and Ceramic Sealant? Thanks again, great job & presentation! 👍

'Knauz' plate frames. I used to work there.

if you wanted to add a wax. would you put it on before the sealer or after the sealer?

@Theseones

Жыл бұрын

Sealant as a base and waxes/detailers as toppers

Car guys supplies?

Question 🙋🏼‍♂️ could you put this on as a protectant and use bead maker over the top during maintenance washes?

@rudygonzales2003

2 жыл бұрын

It's basically the same concept as P&S Bead Maker. I use the C2v3 over CSL coating

@Theseones

Жыл бұрын

Use this as a base and PS Beadmaker as a topper.

G1 or G5 on glass. I wouldn't put C2 on front screen

Jason, Can we reuse mf towels after using the C2 as a topper or should they be discarded the way we do after ceramic coating out of a bottle?

@Carsupplieswarehouse

3 жыл бұрын

Hi Rob, you are able to reuse the microfiber towels that you use while applying C2 v3, they will not be ruined. Of course, be sure to follow the standard procedure about microfiber washing and care, but towels used with C2 v3 don't need any special attention or anything like that. -John

I forgot to use gloves when applying this! Did I damage anything doing this? Also, I noticed my truck picks up more dust than usual after applying, is this normal?

@Carsupplieswarehouse

4 жыл бұрын

I think you will be OK if you didn't wear any gloves. Not sure why you have "more dust" could just be the time of year.

Great video, I'm sold on getting my hands on C2v3... around 3:14 you mention something to dilute for polish residue removal - what was that? I turned on CC and it said "panel whites" - don't know what that is... thanks!

@nickp6472

4 жыл бұрын

I noticed captions said panel white as well. It's actually Panel Wipe by gtechniq.

@Mark_B544

3 жыл бұрын

Yep clearly panel wipe

Love the videos, BUT,...voice volume level 3, music volume level 10,...annoying to adjust volume throughout the entire video, can you level it out?

Can i use this product With any Brand off ceramic???

@Theseones

Жыл бұрын

Yes you can, however IF that other brand has a topper specifically made for it, then it's better to be safe and use that instead.

So can this actually be used outside in the sun in case you don't have any shade?

@Theseones

Жыл бұрын

No, don’t use on hot surfaces or in direct sunlight.

Can I use this on a matte or satin wrap?

@lucyandrich1

3 жыл бұрын

Good question.......I was going to ask the same...

@gaycha6589

3 жыл бұрын

Gteq have aproduct called Halo for matte

Has anybody had an issue with silica spray sealants collecting more dust?

@Theseones

Жыл бұрын

Most coatings/sealant/waxes are antistatic, however your towels are not, do not use dryers after you've washed your towels.

Is it durable than Turtle wax seal and shine

@ericzochowski3749

3 жыл бұрын

much much better,trust me

@nickfort2701

2 жыл бұрын

Bro way better! I used to love S&S but this stuff blows it out of the water!!!

Can this be used on plastics?

@Theseones

Жыл бұрын

Yes, allow plastic and trim to 'soak' it first before wiping off and apply a second layer afterwards, to get the most durabillity.

Can I dry with a shammy after applying or does it need to be a microfiber?

@Theseones

Жыл бұрын

It shouldn't be an issue

you do not more work in Chicago Auto.... ?

@Pty-gk2vb

3 жыл бұрын

I think he's the owner is car supply warehouse

Can I use this product after i wash my car if the car is already waxed ?

@tinkietinkie2684

3 жыл бұрын

Yes. It works great over wax and will give wet shine.

Can be kept for 12 months after opening!!!! Really??? Please answer this.

@Theseones

Жыл бұрын

Yes, most chemicals last 6-18 months after it has been opened, but they do get weaker.

I personally didn't find the product to be anything special. I was excited to try it and once I did it was just ok. Nothing bad about it but the shine and slickness were no better than most other products.

@Ryan_H22

4 жыл бұрын

Curious about this myself... Any chance you compared it to TLC2? Thanks!

@gerardojuarezjr8269

3 жыл бұрын

Same results. Applied to coatings after clay. On 1000mile old paint. Surprised to still have water spots and stuff a week later after rain

$50 for 1 liter of this $47 for a gallon of beadmaker thoughts?

@SpartanKyuubi

3 жыл бұрын

Bead maker is a topper. Less protection, less water repellency, and way less durability. The only reason to buy Beadmaker over this is if you have a full ceramic coating and just want to top it off. Also if you wash your car more frequently, Beadmaker will last you longer.

@J1Z06

3 жыл бұрын

@@SpartanKyuubi Thanks for Your reply

@J1Z06

3 жыл бұрын

I tried it a week ago. I like it better as a drying aid . Zero isses. It was streaky after applying to dry paint after a wash.

@SpartanKyuubi

3 жыл бұрын

@@J1Z06 use a low GSM microfiber. Apply to a maximum of 3 panels at a time and then buff immediately

@J1Z06

3 жыл бұрын

@@SpartanKyuubi Thank You!

Using way too much product. If you put that amount on dark wet car, it wil streak. good stuff tho