The Bilstein Shock Machine I Built to Repair 46mm Steel Body Bilstein Shocks
Автокөліктер мен көлік құралдары
Back around the mid-2000s, I built a machine to repair Bilstein Shocks. This isn't quite as nice as the one Accuforce sells, but the neat thing is I figured this out myself without copying anything else other people built.
It was quite a project.
If you like this or some of my other videos, subscribe to the channel and ring the bell for notifications when new videos get released.
You can find me on my blog at:
www.hogantechnologies.com
You can find me on Facebook at:
/ hogantechnologies
You can find me on Twitter at:
/ ltemodel
You can find my book on Amazon at:
amzn.to/3f6RzkS
Пікірлер: 7
If you still got that thing I'll try to plan a trip out some time.
@KevinKatzenberg
Жыл бұрын
Sorry, I sold it a couple yers ago. I leave the video up as kind of a reference if someone wanted to build one. I should do a video showing how I built it.
@nobodynoone2500
Жыл бұрын
@@KevinKatzenberg Well its great as that too! thank you.
Great videos. I've been drilling, taping and converting to bladder valve, hyperscrew or Schrader valve. Been wanting a machine like that for years. Milwaukee is a little far from Texas for a little road trip.
@HoganTechnologiesLLC
3 жыл бұрын
Thank you for watching. I originally built it because they did not allow schreader valves up by us.
@greglangley4518
3 жыл бұрын
@@HoganTechnologiesLLC Thanks for making the video. Been thinking about it and have started gathering parts to build one. Hope to get one working over the winter.
@HoganTechnologiesLLC
3 жыл бұрын
@@greglangley4518 The one thing I should have done differently is making the shaft extensions out of steel instead of aluminum.