Sir, by you taking time out to move that spare tire out of the way tells me that you are dedicated to your viewers. Awesome review sir, job well done. Take care buddy.

@GearsGadgets

3 жыл бұрын

Thanks. I appreciate the kind words. I try to think about the viewer always.

Best 5160 install and review video I've seen. No bs, straight to the point.

@GearsGadgets

5 жыл бұрын

Thanks!!! I appreciate that!!

Now thats technical. No bullshits. Great work💪

@GearsGadgets

5 жыл бұрын

Thanks!!!

@johnnytorres277

5 жыл бұрын

@@GearsGadgets I agree. You're really good at this.

Im in awe of how easy it appears. Getting a new to me tundra and these were installed.

Finally a decent shock comparison video with some actual scientific proof that one shock is better than the other instead of some idiot mouthing about how "this one feels better and its shiny" Love the vid I plan on upgrading my smooth body 5125s to the 5165s soon

@GearsGadgets

4 жыл бұрын

Thanks Greg Olson, I appreciate it!!!

Seen a few videos on 5160 installations, your one is the Best, straight and simple, I did my F150 the same way! Thanks

@GearsGadgets

3 жыл бұрын

Thanks Cesar, I appreciate it.

Well done! I'm convinced that my 2019 needs these. I'll be ordering a set for the rear as soon as they are in stock.

You did a great job with this KZread video. The drone view of the washboard AZ road, side by side comparison of the original versus new shocks in operation, FLIR data and the replacement procedure...WOW!. I just drove down a washboard AZ road tonight in a 1996 GMC Z71 Sierra and thought it was going to shake the fillings out of my teeth. I always wondered if I should replace the factory shocks with something better. You answered my question. Thanks!

@GearsGadgets

4 жыл бұрын

Thanks T Kinsey, I appreciate it!!!

Pro video, love the IR camera before and after on the test loop. Awesome!

@GearsGadgets

6 жыл бұрын

KTMwyo14 thanks!!

@rgjr.6055

4 жыл бұрын

Yes, I’ve always heard people talk about temp differences but never NEVER a thermal image. He went above and beyond.

Threw these and deaver mini packs on the rear of my 2020 Silverado and it takes big hits way better. It stays planted to the ground and no more harsh bottom outs. Now for some 6112’s

Wow. Very professionally made video. Some important information that others rarely provide.

My stock shocks were terrible. After hitting a bump all 180lbs of me would fly out of the seat and hit the headliner. I used Bilstein 5100 in the front and rear; night and day difference!

@GearsGadgets

4 жыл бұрын

I agree jewllake. Thanks for the comment.

The temp gain test is key to longevity! Bilsteins will outlast the Ranchos also!

@GearsGadgets

4 жыл бұрын

Absoltely. Thanks for watching. My 6112 video is coming this winter.

The bill Stein is a piggyback shop which means that there's more oil and more place for the oil to go so that's why it was cooler

@GearsGadgets

3 жыл бұрын

Yep

Legend has it, he’s still waiting for the 6112s..

@GearsGadgets

5 жыл бұрын

I actually have them in my garage. Problem is my garage is 110 degrees and I haven’t really felt like working out there. It’s coming soon!!

@Vhrodriguez91

4 жыл бұрын

Lol

@joset3851

4 жыл бұрын

Gears & Gadgets still waiting lol

Fantastic review. You have a nice talent for narrating.

@GearsGadgets

4 жыл бұрын

Thanks Mauro Torres, I appreciate it!!!

thanks for the video, you sold me on them was looking for KINGs on my 01 tundra but now im leaning to do upgraded billsteins all the way around. (the oem bilsteins mine came with are only so good after 21 years)

@GearsGadgets

3 жыл бұрын

Thanks, happy I could help. I actually just did another video on them too since your comment. kzread.info/dash/bejne/Z2mu1JWFpcjTp6w.html

You don’t have to add the adapter that goes inside the ring?

If he was more of an exciting speaker and if he didn’t say Bilstein like “bilshtine” then he could really have something going with this channel bc this is a great review

@GearsGadgets

5 жыл бұрын

Kason Frigetto appreciate the constructive criticism. Also. “bilshtine” is the appropriate pronunciation. It’s like getting mad at someone for saying Porshuh instead of Porsh for Porsche. I appreciate the kind words on the review though and a agree the dialog is a little drab. Stay tuned for my 6112 review coming shortly.

@kasonfrigetto3824

5 жыл бұрын

Gears & Gadgets I wonder why the people who work for Bilstein don’t say it like that then

Excellent video looks great I'll keep an eye out for your 6112 review I'm a huge fan of Bilstein, I'm currently running B 5100 front and back it feel awesome

@GearsGadgets

5 жыл бұрын

Thanks I appreciate it. The 6112’s should be coming soon. I’m waiting on Bilstein to release them. Feel free to subscribe for future videos. Thanks for watching.

These seem to be the 5100’s but just with a piggyback reservoir

Anyone thinking of buying these that lives were it snows and the city puts alot of salt on the road, spray it down with fluid film, have had mine for roughly 2 years and no sign of rust (🤞)

Going to do it to my 16 Yukon.thanks for great video

@GearsGadgets

4 жыл бұрын

Thanks Ahmed Mohammed, I appreciate it!!!

Or is it the opposite these shocks help keep your ball bearings and joints last longer?

Tengo una grand cherokee 2006 cree que funcione?

This video is brilliant thanks for such a comprehensive review

@GearsGadgets

4 жыл бұрын

Thank you S Levesque

Great tutorial and review. Question, would these take care of bead hop while traveling interstate speed on concrete with expansion joints?

Great effort with all the extra's and editing in this video...thumbs up (even with all the "Bilschteins" in there)? Good call going w the 6112's eventually on the front!

@GearsGadgets

5 жыл бұрын

Thanks I appreciate it. It is a German company so SHTINE would be proper .I took German in high school thus I am an expert. Just kidding, I did take German, but I am probably on 3rd grade level at this point. Anyway, I try to pronounce things properly. Who knows if I am right. Its like Porsche being pronounced Poorsh or Porshah. Anyway. I appreciate the positive comment. The 6112's should be on the way soon. I spoke with Bilstein and they will be released for the K2XX trucks VERY soon.

I just ordered these and the 6112 (new model 6112 that starts at 1.85") for my 18. Question. (I'm sure the packaging will tell me.) But GM rear shocks are typically mounted shaft up, shock body down. I've noticed you and many other folks mount these 5160s body up, shaft down. Is that intentional because it's bilsteins specified? Or is it something you tested and determined was better? Just curious before I tackle my install. Though admittedly, rears are easy haha.

Im looking at an adjustable 3" level/lift and Bilstein makes these for my truck in a 1.5" lift or 4-6" lift for the front, not sure which to go with

@GearsGadgets

5 ай бұрын

That is a good question. I kind of in the middle there. I wouldn't go with the 1.5" option if I had to gamble I would go 4-6.

Great video , very informative and simple explanation.

@GearsGadgets

4 жыл бұрын

Glad it was helpful!

I have the whole front and rear kit on my tacoma and the feeling in the ruff trail is awsome due to the front strut (way better) and the rear appear to be welder to the road especialy in fast curve in inegal paved road. The big problem is the finish quality! The paint is really ...cheap If your truck see the winter, 1 winter and it is over, they will be rusted like hell!

@GearsGadgets

5 жыл бұрын

Here in Arizona I probably wouldn't have that issue but thanks for sharing. I have heard that before.

@chrisginoc

5 жыл бұрын

@@GearsGadgets Im thinking about putting these on my 2015 Tacoma trd off road 4x4 along with some 6112 up front. Regarding rust: Wouldnt you be able to spray the outside with some rust protective spray?

all steel bodied? Looks pretty good, but. .You can get king coilovers up to three inches of lift in front for only $1500 i wouldnt bother with anything but kings up front!

@GearsGadgets

4 жыл бұрын

Fair enough

I have a 2016 Sequoia SR5 Fwd. I am planning to go with 6112 coilover in the front (fully assembled, Sku 47-310971-ASB-2). On the rear, struggling to decide between 5100 shocks (sku 33-187280) and 5160. Any advise? Looking for a softer ride on the pavement.

What i want to know is how would this exposed shaft hold up in new England weather wouldn't get rusty and start to leak without any sleve protecting it like 5100s have.

@GearsGadgets

3 жыл бұрын

I certainly cant test that here in AZ.

Just installed the same 5160’s to the back of my 2018 - do you have any play in the top of the shock? I’ve torqued it down to the recommended 66ft but still have a mm or 2 of side to side play ??? Thanks

Hope you find the fronts, tried searching too.

@GearsGadgets

6 жыл бұрын

Im waiting on a reply from Bilstein to find out the status on them.

great video- you are a scientific stud Sir

@GearsGadgets

6 жыл бұрын

Thanks. I appreciate it. I try to put in as much time as I have on every video.

Great video. Why hasn't someone else used a thermal camera for the 5160's? Makes the decision a bit easier.

@GearsGadgets

5 жыл бұрын

I appreciate that. I am hoping to get my hands on the 6112's when they come out too. Still waiting on them.

Big difference!!!

@GearsGadgets

4 жыл бұрын

100%

Hi there, I have 2017 GMC Sierra all terrain x and I want to make my ride smoother. Truck tends to go sideways on bumps so putting Bilstein can prevent that.. ride is stiffer with rancho and I can feel every bump on the road while driving. I never drove Denali , does magnetic shocks gives a smoother rides.

@GearsGadgets

5 жыл бұрын

I think the magnetic ride is probably best but the Bilsteins are incredibly good at keeping the truck from going sideways on bumps.

Thinking of doing Kings on the front and these on the back with some Camburgs..for the price I really like these.

@GearsGadgets

4 жыл бұрын

Do it!!

Great review!!

Great video. No bs and covered all the info id want to know about the product. Instant sub from me!

@GearsGadgets

4 жыл бұрын

Thanks Cale Shanks, I appreciate it!!!

Great informative video! Do you think these would help if towing a small travel trailer with my Tacoma?

@GearsGadgets

5 жыл бұрын

Bary Thompson thanks Barry!! They would help over stock shocks when it comes to heat dissipation. It wouldn’t really give you anymore towing capacity but would keep the shocks cooler which should help keep the rear end more composed.

If you don't know already because this was posted a few months ago you can get the 6112 through camburg.

@GearsGadgets

6 жыл бұрын

I looked but I didn't see them on their website for the Sierra/Silverado platform.

Mine lasted about 4 years on a tundra

Very nice video, I have a 2011 gmc 1500 and wonder if these are available for the front struts, they sure would look badass on the rig haha

@GearsGadgets

4 жыл бұрын

Thanks Zack Daniels, I appreciate it!!!

I have 2019 Chevy Silverado truck with no lift, will these 5160 shocks work with my truck. the stock that came on this truck has a rough ride looking to get a better ride.

@GearsGadgets

4 жыл бұрын

Yeah they should work fine. My truck is stock.

Been researching a ton on shocks for my 2005 f250 diesel. I believe it’s stock high but I have 35’s on it and I was wondering if I can put these on all 4 corners.

@GearsGadgets

4 жыл бұрын

I am not sure about the F250 setup. I am not qualified to start recommending suspension setups on unfamiliar vehicles.

Great vid! Going to order the 6112 and 5160 for my z71 19' tahoe. Did you get a chance to install the 6112's? If so, how are they?

@GearsGadgets

4 жыл бұрын

I have the 6112’s ready to install next weekend. Video coming soon

i am waiting for the new gmc sierra 2021 regular cab Is it convenient to switch to bilstein 6112 forward and 5160 back at the dealer

@GearsGadgets

3 жыл бұрын

If you can swing paying the dealer for it I would go that way.

How do they Perform on the road

Nicely done video 👍🏼.

@GearsGadgets

6 жыл бұрын

MilkBone3327 thanks. I appreciate the positive feedback!!

@MilkBone3327

6 жыл бұрын

Tech Chex & Motor Vlogs Looking forward to the 6112 review. Thanks

Good information Thanks

@GearsGadgets

4 жыл бұрын

Thank you Jack Smith

Could the reservoir be installed the other direction so the hose is straight? I saw that in another vid. I have the 6112's in my 01 4Runner in the front, but the 5160's weren't out yet so I went with the 5100's in the rear.

@GearsGadgets

4 жыл бұрын

I dont see why not but I dont recall what the directions said. Knowing me I did it by the book

I just put some 5100 series on my Hummer H2.

@GearsGadgets

4 жыл бұрын

Sorry for the super late reply CHEVY BOY!!!!. I appreciate that you stopped by the channel and apologize for not responding WAY sooner.

No dust boots on them? The could wear out fast! Are there any dust cover boots avaiable?

@GearsGadgets

5 жыл бұрын

They didnt come with any, you can buy aftermarket dust boots.

I was going to pull the trigger on some 5100s and now I'm wondering if the extra cash is worth it on the 5160s. Ahh.

@GearsGadgets

4 жыл бұрын

I think it is.

Will these improve my ride after installing 1.5" blocks? On an 05 tacoma pre runner ? I have 4600 on now

@GearsGadgets

3 жыл бұрын

I am not totally sure because they will probably feel different truck to truck. I wouldn’t want to steer you wrong.

Could I put one of these 5160s on my stock hieght titan? I thought these were made for lifted trucks.

@GearsGadgets

6 жыл бұрын

Regis Riley they work on non-lifted trucks. My truck isn’t lifted and they worked great. Just make sure you buy the 0-2” shocks.

What year is your truck? The link is saying these 5160s won’t fit a 2015 Chevy 1500

@GearsGadgets

Жыл бұрын

Mine was a 2015

@justingraham6146

Жыл бұрын

@@GearsGadgets weird. The link doesn’t even give an option for the 1500

So 5160 reservior shock vs. Fox 2.0 non res. Which one is better off road?

@GearsGadgets

5 жыл бұрын

I have never tried to fox shocks but I would think the reservoir 5160 will be better than a non-reservoir of a competing brand. I think the Fox 2.0 is just a bit of an upgraded standard shock but wont have the same cooling capability of the reservoir shocks. This is just my opinion since I am not a suspension pro.

Been wanting to buy these for some time now.. but they are always out of stock

@GearsGadgets

4 жыл бұрын

They are absolutely worth it.

Dont your ball bearings and joints break before these shocks..

is it more comfort on daily driving than oem

@GearsGadgets

4 жыл бұрын

Absolutely.

I need a pair for my tacoma

How do you feel they changed the ride on the highway? Help with the bouncing?

@GearsGadgets

4 жыл бұрын

Yes

Great video

@GearsGadgets

5 жыл бұрын

Thanks, I appreciate it.!!

How are these compares to standard 2.0 fox shocks

@GearsGadgets

3 жыл бұрын

Good question. I have never run the fox 2.0’s

I thought shiny surfaces dont read correctly with infrared cameras.

@GearsGadgets

5 жыл бұрын

I know mirrored surfaces or tin foil type surfaces would have that issue but im not sure how much it would apply to a zinc coated surface. Not arguing, you may be right.

Damn, great vide. Dude has some serious gear to get that info. Good shit and congrats on being able to afford all that 😂

@GearsGadgets

4 жыл бұрын

Thanks I appreciate it.

Is the ride smoother or stiffer? I’m looking for the smoothest ride I can get since I don’t tow much. Thank you.

@GearsGadgets

5 жыл бұрын

Definitely smoother and more composed over bumps. I can tell the difference not only off road but over things like speed bumps are a big difference too.

@niceguy6376

5 жыл бұрын

Gears & Gadgets thanks man.

@GearsGadgets

5 жыл бұрын

No problem. I plan on doing an update video sometime in the near future if you want to subscribe.

Can I get front rear for 17 Silverado 6.2 Ltz

@GearsGadgets

4 жыл бұрын

Not sure the question.

Are these also scalable to lifted trucks?

@GearsGadgets

4 жыл бұрын

I am not 100% sure to be honest.

Did you ever find the 6112's? If so, I'd love your input! Great video!

@goodlife5825

4 жыл бұрын

I need the coil overs for the front of a 2002 Silverado

@GearsGadgets

4 жыл бұрын

Installed last weekend, I have some shots to film this weekend and the video should be out by mid next week.

@goodlife5825

4 жыл бұрын

@@GearsGadgets sound good man, let us know when the video is up

@GearsGadgets

4 жыл бұрын

Chevy Silverado this Tuesday it will go up

@goodlife5825

4 жыл бұрын

@@GearsGadgets hell yeah man 🤙 looking forward to seeing it

Stage3motorsports has them

@GearsGadgets

4 жыл бұрын

Thank you Eco King

Can i put then on 2016 escalade esv with magnetic ride?oem shock died or they just sucks😂

@GearsGadgets

3 жыл бұрын

Sorry to hear that. I just looked it up, looks like they are not compatible with an ESV.

@faridgadimov5955

3 жыл бұрын

@@GearsGadgets i think they not compatible because of magnetic ride will give light.

Nice video

@GearsGadgets

4 жыл бұрын

Thanks AM44 _, I appreciate it!!!

do you think it would need boots ?

@GearsGadgets

3 жыл бұрын

I don't think so.

just wondering where you get those steel toe slippers from 😂

@GearsGadgets

4 жыл бұрын

Boot barn.

How are these compared too the 5100's? Ty

@GearsGadgets

3 жыл бұрын

I havent ever run the 5100’s but the added oil reservoir of the 5160’s certainly help them run cooler and would lead to better performance. If price is a big deal for you I think the 5100’s are fine but for me, when I do these kinds of projects I always spend a little more since I am already making the time and effort to do the work.

Any thoughts on the 4600 stock struts/shocks for the Tacoma??

@chrisginoc

5 жыл бұрын

Trash! Buy some 6112 in the front and 5160 on the rears.

@GearsGadgets

4 жыл бұрын

Yeah

Can you run these on stock heights?

@GearsGadgets

4 жыл бұрын

Yeah it keeps it stock height.

What is the part # for that resi mount

@GearsGadgets

6 жыл бұрын

Eco King the link is in the video description.

Bilshtine??

@thatguythatdoesstuff7448

5 жыл бұрын

That's how it's pronounced. It's a German company.

@TheBogeyBros

4 жыл бұрын

It’s actually pronounced bill-steen. Currently stationed in Germany

@thatguythatdoesstuff7448

4 жыл бұрын

@@TheBogeyBros You are not correct. forvo.com/word/bilstein/

@GearsGadgets

4 жыл бұрын

Yes. Thats how it is pronounced.

@featheredcoyote5477

4 жыл бұрын

🤣Annunciation police out in full force🤣

researching about these shocks for my 2015 Silverado, and found your video! excellent! thank you!! and oh they 6112 are finally out for this silverado/sierra trucks. I found them at 4wheelparts.com for 732.99

@GearsGadgets

5 жыл бұрын

Thanks I appreciate it. I actually have the 6112's in my garage ready to install. Just need the time to do it so that video will be coming soon

@jacobkrzyzek5777

5 жыл бұрын

@@GearsGadgets That is great! how do you like them!? I'm just about to pull the trigger on your exact setup. I'm still researching if my towing capabilities will diminish with this shock and coilover set.

Any big reason you chose these over the Fox 2.0s?

@GearsGadgets

5 жыл бұрын

Mainly because the Fox isn’t a reservoir shock. I think you get way more bang for your buck and a better product out of Bilstein IMHO

@nickb.237

5 жыл бұрын

@@GearsGadgets Thanks for the reply! One more question, did anything else come of the vibration issue past the settlement video? I have a 2014 Silverado, and after watching your mini series I am extremely geared towards not even telling the service department about this and waiting for a true fix. I have extended warranty, but with all the trouble you faced while under Manufacturers warranty, I imagine I wouldn't get anywhere close to having them "fix" it. Please any info you have gained after the settlement would be appreciated,

@nickb.237

5 жыл бұрын

.... @@GearsGadgets

Hi, 2018 Silverado single cab, standard bed WT. Removed rear OEM blocks to level truck. With shorter wheelbase ride is a bit rough. Don't tow or haul. Any recommendations to help smooth the ride? I feel most of the issue is from the rear. Thx.

@GearsGadgets

5 жыл бұрын

Ride is rough with the Billsteins or factory shocks?

@2wrdr

5 жыл бұрын

@@GearsGadgets I have both front and rear OEM shocks with less than 4K miles on the truck.

@GearsGadgets

5 жыл бұрын

These Bilsteins really do an incredible job smoothing things over.

@4244john

5 жыл бұрын

2wrdr i had a 2008 Silverado single cab with bisteins 5100 all around. The truck felt much responsive to bumps and potholes and the truck going sideways running over potholes was minimal. I now have a 2017 Silverado single cab and those OEM shocks are TRASH. My truck twerks each time I’m up to speed and I hit a nasty pothole. From my experience, I highly recommend you get some bilstein shocks.

@2wrdr

5 жыл бұрын

@@4244john Thanks for those responses. It looks like I have another upgrade to do.

Where’s the update video?

@GearsGadgets

5 жыл бұрын

It’s coming. I was waiting on Bilstein to release the 6112’s and to do an update then. It’s taking a little longer than anticipated. I will do an update in the near future.

Still have the trucks and setup?

@GearsGadgets

3 жыл бұрын

Yes sir. m.kzread.info/dash/bejne/pY5qj6-zpa_Uc7w.html

@KingFillip

3 жыл бұрын

@@GearsGadgets watching that video now, lol. 👍

Could a non mechanic install these in his driveway?

@GearsGadgets

4 жыл бұрын

If you can change your brakes or do an oil change and understand how a jack works, I would say yes. If you are uncomfortable I would take it somewhere. But I am not a mechanic and I did it.

Serious question. I have a '02 Suburban, the rear comes with air shocks. What do you think about putting the 5160s on it?

@GearsGadgets

5 жыл бұрын

I think it’s a good idea as long as they fit. I love my 5160’s

you put the lower bolt in backwards

@AS-nx3dp

6 жыл бұрын

also the the shocks should be facing the other direction

@GearsGadgets

6 жыл бұрын

A S oh your right I did. I’m not sure how you caught that but good eye!! Thanks for watching. I will flip it around.

@GearsGadgets

6 жыл бұрын

A S I don’t think shock facing front or back is a thing but I could be wrong. As long as the fittings are clear of obstruction and the hoses are clear I don’t see how that makes a difference. Theoretically I could see bolts being an issue as they are angled and if the nut backed off the bolt could drop out vs the other way the bolt would possibly stay in (could still walk out). The directions I had didn’t mention facing shocks in any specific directions.

@AS-nx3dp

6 жыл бұрын

I recently installed 5160's on my Tacoma and i agree these shocks are huge upgrade from the stock shocks. Flip the lower bolts around and you're good to go.

we here at desert rat can help you if you still need them

@GearsGadgets

4 жыл бұрын

I somehow missed this comment. Sorry. Question. I have the 6112's for the front. Do you want to collab and install them for me? I have the coil spring compressors and can do it in my garage but I would rather promote a shop who can do it safely and not kill myself in the process. Thoughts?

4wheeler supply.com I’m putting your exact same set up on my Toyota Tacoma

@GearsGadgets

4 жыл бұрын

You won't regret it

good job nice video

@GearsGadgets

4 жыл бұрын

Thanks Basheer Dweik, I appreciate it!!!

Dang. That might just be the first time I’ve heard Bilstein pronounced correctly. Or “correctly”. Depending on your belief

@GearsGadgets

5 жыл бұрын

Thanks!! It seemed to annoy more people than it pleased.

@dangda-ww7de

4 жыл бұрын

its german name, we dont know how to pronounced it.