THE BEST UPGRADE | Making Self Squaring Flip Stops for my Small Sled
Тәжірибелік нұсқаулар және стиль
This flip stop blocks for my small cross cut sled, is something I wanted to make for a long time. Now i did it. The construction is the same, as the flip stops I made for my miter saw except the pointers. I like this flip stops a lot. Especially the fact that they can flip up. That is very usefull to prevent the piece to get pinched between stop block and saw blade. In this way I can set the piece against the stop, flip it up and make the cut. Also the self adhesive tape measure is very usefull. Now i dont have to measure anymore. I'm so glad that I finally made this flip stops.
ISBI
-------------------------------------------------------------------------------
#ISimplyBuiltIt #like #comment
-------------------------------------------------------------------------------
Пікірлер: 68
Crystal clear instructions / commentary, quietly narrated. Brilliant video, thank you.
@ISIMPLYBUILTIT
4 жыл бұрын
Thanks man.
Thanks for starting the video with what is going to be built. Really helps me understand what is happening through the rest of the video.
Forget the flip stops, the hand holes in the sledge guide preventing fingers getting caught in the saw blade is a brilliant detail. Well done!
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you
Excellent. Thank you for sharing
I really like how you make your own accessories. Beautiful work sir.
Really like your fence, brilliant.
Wonderful. Thanks! I cant believe that I have two accurate stainless rules that I never use for wood work. I am transferring them to the shop from my office desk. And your accent is just fine thanks.
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you so much. I'm glad to read that.
Clear and precise, thank you.
@ISIMPLYBUILTIT
4 жыл бұрын
I'm glad if you like it.
Good Video 👍👏👏 Thank you very much Norbert (France)
Clever design and really clear step-by-step build. Much appreciated!
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you.
@lorenzocarmelo6781
2 жыл бұрын
Instablaster
I thoroughly enjoy your videos-the way you zoom in to show details is most helpful. 👍🏻
@ISIMPLYBUILTIT
4 жыл бұрын
Thanks
@billcoley8520
3 жыл бұрын
Exactly, I wish he held some of them just a little longer.
Hello my friend. Good idea. I watched you curiously. Very handy for slideway cutting, turning and stopping. really good idea. congratulations. Thank you for sharing. warm embrace. Yours truly....
Super Anleitung 👏🏻👏🏻👏🏻
Very expertly done video...I liked everything about it.
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you so much.
Luv your projects. Neat and professional. Thank you. Regards Hugh. South Africa
@billcoley8520
3 жыл бұрын
Hi Hugh from Tennessee
Very useful and brilliant explained. I'm definately gonna make some for my self! Thank's a lot!
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you. I'm glad if you like it!
@faun1630
4 жыл бұрын
@@ISIMPLYBUILTIT Yes, SPLENDID!
these are great! Well done and thanks for inspiring me!
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you. I'm glad if you like it.
Brilliant… Thank you my friend…
very nice a good construction
beautiful job!
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you
Excellent
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you.
Nice work! 👍😎🇦🇺
@ISIMPLYBUILTIT
4 жыл бұрын
Thanks
I have never seen a sled with handles, but I like it. Never made a fence straight so that I could have a support bump in the middle, high enough for taller saw height. But with the slots, I can make a taller flat fence, with t-track and a flip-stop, and still be able to grip the wood.
Bravo complimenti. Fabrizio 🇮🇹
@ISIMPLYBUILTIT
4 жыл бұрын
Grazie!
Nice!
@ISIMPLYBUILTIT
4 жыл бұрын
Thanks
Good
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you.
👍👍👍
Awesome, where can I buy the tape measurement you've cut to add to the jig?.
@ISIMPLYBUILTIT
4 жыл бұрын
I bought it on amazon. Look here there are plenty of such adhesive tape measures : www.amazon.com/s?k=adhesive+tape+measure&ref=nb_sb_noss_1
I make one but when I butt the cut piece against the swing arm, there is a bit of lateral play. So my cuts aren't accurate 🥺 would you have any suggestions to eliminate this? Thanks
Hey nice work! did you do the little cut on that side of the plastik that lays directly on the meassurement-tape? If so - Ok, my question answered - if not, I would recommend to do it on that siede which will lay directly on the tape - parallax error
When ever my screws are to long I will start the screws and remove them and grind them shorter
Where do you source your wing bolts?
@ISIMPLYBUILTIT
4 жыл бұрын
I get them from a near by hardware store. But in the Future I will 3D print them.
Very nice canal. Good job. But very fast video.
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you. You're not the first that mention that. I can make slower videos in the future but they will be longer.
Could you please explain what makes it self squaring?
@ISIMPLYBUILTIT
3 жыл бұрын
The fact that the support part is round at the bottom makes it self squaring. As soon as the wing nut is tensioned the round part will align with the t-track.
@basured9795
3 жыл бұрын
Thank you. I didn't find that self-evident either.
Has anyone ever told you that you sound a lot like Arnold Schwarzenegger?
How did you add on the center point marking to your self made marking tool & how does the center point finder work with it, please?
@paulreader1777
4 жыл бұрын
Look at his construction video for the self made marking tool kzread.info/dash/bejne/rH51wauFlrPAZ9Y.html
While your projects are useful and clear, the most promising element of your videos for the "self-taught" (a US thing) like me is exposure to your methods of work. I wonder, were you subject to a rigorous apprenticeship?
@ISIMPLYBUILTIT
4 жыл бұрын
Thank you. What do you mean by rigorous apprenticeship?
9:50 Wait what?
@ISIMPLYBUILTIT
4 жыл бұрын
Did you mean the fold down vise?
I'm so.glad, that your tools are sooo much better than your english articulation 😀😃😄😁😆
Awesome flip stop - *but* this accent is absolutely *lethal* .
I bought Woodprix once and now I have lifetime access to thousands of woodworking projects.