3 Amazing Woodworking Tools Hack | Tips & Tricks
Ғылым және технология
Amazing Drill Operated Wood working Tools Hack | Angle Grinder Powered Tools !
Main channel - crazyNK: kzread.info...
Fb Page: / awesomecreativeideas
Facebook: / ccrazynk
Thank you for watching Navin Khambhala.
Пікірлер: 145
Three ways how NOT to use an angle grinder. Buying the correct tool is going to be more effective then losing your fingers.
Most remarkable thing is that he still has all his fingers! 😮
@JonTaRW84
5 ай бұрын
My tought aswell 😅
Future Darwin Award Winner right there!
A good video of what not to do with your tools !!
The saw blade sharpener will work if there is no set to the teeth. If there is a set you need to skip every second tooth and then reset the grinder to align with the other set.
Руководство по заворачиванию саморезов. Автор понятия ни о чем другом не имеет, но снято всё красиво. Настоящий "мастер"!
This should be renamed to “How to unalive yourself with an angle grinder”
№2. так пилу нельзя заточить. (можно , но это неправильно. там углы заточки разные . через один зуб) , а у вас происходит спил зубов в 1 плоскость.
@dioniseywings747
5 ай бұрын
хрен с ним, с зубом, но заточным диском твердосплавные напайки, это реально жесть..
@sergnemo2379
5 ай бұрын
@@dioniseywings747 блин..таки да..куда я смотрел..
@dioniseywings747
5 ай бұрын
@@sergnemo2379 норм! Мне как то приспичило, я на алмазном плиткорезе такой диск затачивал........
Last one is deadly. Rpm on angle grinder is 11000 and normal cutting disks are rated for 12500. Your contraption can desintegrate and all thouse screws would become bullets. This might happen any time no warnings. Look up angle grinder accidents. Very dangerous. But is a good idea. For example with an anglegrinder with variable rpm at low settings might be safe enough. Cool idea. But not safe.
@nicosadie6493
4 ай бұрын
Agree 100%
@ikiproailes
Ай бұрын
A ahe rez agreee
Есть пилы с прямым зубом с твердосплавными напайками. Теоретически их можно так точить, только надо поставить на болгарку алмазный диск по металлу, но не по камню (оригинальный по металлу дорогой) или приспособить алмазную чашку. Болгарку надо с регулировкой оборотов. Тысяч 5 оборотов не более. В самом станке, как я понял, диск в момент заточки фиксируется только прижимом к кнопке выключателя- это слабое место конструкции.
Sharpens blade with opposing angles to all one angle...
Yo personalmente,no recomendaría nada de esos inventos con la amoladora,porque la velocidad que tienen es muy grande por lo que las hacen sumamente peligrosas, hay que usar las herramientas como corresponde y para lo que fueron diseñadas
Yea, that's what happens when you have no idea how wood saws work 🤔
Excellent tutorial! It's important to know this, and I appreciate you sharing your knowledge and experiences. Warm regards and, of course, a well-deserved like
@saleemkawa3996
4 ай бұрын
😊
An artist teacher who deserves thanks
2 вариант фуфло, на самом деле заточка не происходит, а наоборот кончик зуба ударяется о диск и тупится, после чего диск маленько загибается и входит в плоскость. Зуб диска должен сначало зайти, а потом подводиться к заточному диску
@user-ie8pr2vw2o
5 ай бұрын
Там вообще ничего работать не будет, жёсткости нет никакой
@domina7419
Ай бұрын
Чушпан пацанов на просмотры разводит! Все эти приблуды для лохов!!! А ему денюжка за просмотры!!!
What is the name of that particular hinge ? I can only suppose it is a /2 Cranked Hinge ?
Thanks for showing you can still use slotted screws. Some people can't even hit the slot.
Как убить хороший инструмент и сдетать шикарное глюкало😊😊😊😊😊
Parabéns este amolador de serra ficou top de mais
@zenobiomenezesalvim1398
5 ай бұрын
So o amolador os outros são gambiarras.
За травмы от "этого"вам не заплатят по страховке 😮😢😂😂😂
TOP demais. Muito bom gostei muito, parabéns pelo seu trabalho ❤❤💯💯👏👏👏👏👏
You have done a great job
Last one is really funny 🤣 🐟 🤣 too🎉🎉🎉
great for rounding the tips of the carbide teeth!
This is a great video, people will learn a lot from it.
@teawithq3351
17 күн бұрын
Like what the inside of a hospital looks like...
Все просто и понятно, без выпендрежа.
№3 самый необходимый! Ну без него прям никак...
Think 3x when you creating such things... safety first
Ladies and gentlemen boys and girls do not do this at home or anywhere else. Angle grinders run much too fast fothese crazy bodged up tools. You don't need them ,they are extremely dangerous are the there are many inexpensive tools that are designed for the purpose. They will do the job much better and a lot safer. Count your fingers and eye balls in the morning and before bed time....the number should be the same
Ini sangat luar biasa pemikiran yang sangat menakjubkan
I like in the first one when they pull out the square to prove that the piece of hollow metal tube they cut on a 45° angle is perfectly square. No shit it's a perfect 90, it always will be when you take the two pieces resulting from a single angled cut and rejoin the cut faces after flipping one around.
@TylerDurden1400
5 ай бұрын
This isn't true at all. It's the result of adding up both of the angles. If you cut it at 80 degrees you have two 80 degree cuts, so 160 degrees total.
@mrtorpedor
Ай бұрын
@@TylerDurden1400 Actually is the duplication of the cut angle, since the angles you refer to have to be equal every time. You will get 90 degrees only for a perfect 45 degrees cut. Congrats for spotting the mistake.
Заточил все зубья под одним углом.... \ /.
Awesome! 👍👍👍
정밀작업은 어려워요. 레일의 유격이 엄청납니다.
Congratulations!. Thank you
Really great
Just buy a compound miter saw.
Hoje preferem o celular, este pinhão traz lembran😢!😂😂😂
Os dentes da serra circular não podem ser amolados so em um sentido, eles têm ângulos diferentes. Não é muito útil essa coisa aí.
Станок#2❤понравился ❤
The lathe is too dangerous because of the high RPM of the angle grinder. But I think if we use drill instead of angle grinder or a variable speed angle grinder than it'll be much safer. But we will also need to add a support to the other end like a real wood lathe.
Cutting machine , very good Nice creator!😊😊😊
Very nice work ❤❤❤❤❤❤❤❤❤❤good 😊
No me parece, demaciado ineficiente el prollecto, muy improvisado para mi, y tiene mucha inestabilidad ese torno, deberías perfecionarlo un poco más?
Я думал он ювелир по шнягам😂 а он оказывается игрушку делал
Perdi alguns minutos da minha vida, dicas de como não usar uma esmerilhadeira.
The second invention is the switch? good video, good work, good inventions, greetings. En el segundo invento para que es el interruptor? buen vídeo buenos trabajos, buenos inventos, saludos.
@jamarjames9501
5 ай бұрын
It's actually a horrible idea, it will only work once with realignment, you can easily sharpen 30 just using a vise and grinder or just use a bench grinder and hold the blade by the time you made this and sharpened one
@ElChokin
5 ай бұрын
What I'm asking is, what is that white switch for?@@jamarjames9501
ЭЙ БРАТАН ТЫ КРАСАВА😊😊😊 ДАЙ БОГ ТИБЕ ЗДАРОВЙЕ УЗ Б🎉🎉
Actually more like a miniature radial arm saw
The RPM off the angle grinder exceed the max RPM of the saw blade by a factor 2. Not that smart to use a saw blade on a angle grinder.
2nd Idea (Thumbnail's ones) 😮😮
Very good nice😊❤
3:51 I hope he has a fire extinguisher
Так точить победитовый диск нельзя!!! Зуб скалывается,надо СРАЗУ ВСЕЙ ПЛОСКОСТЬЮ касаться -то есть прислонять его,а не проводить зубом
Time bomb waiting to explode, speed much to high! Use slower speed motor on wood lathe PLEASE!
Liarbiasa 👍👍👍
Very nice
2nd one too good.
Muito bom 👍
К чему городить такой забор!?От скуки?😢
Woodworking hacks from someone using super glue on wood 🤔
Why would i take advice from someone who uses slotted wood screws...?
@waydbro1
5 ай бұрын
Only matching screws left from that 1940s miscellaneous jar
@steveogburn6316
5 ай бұрын
Because if someone can use slotted screws as fast as you can use cross-head screws, they're obviously more skilled than you are.
@robertwilson8365
5 ай бұрын
Strange that you can still buy slotted screws........ A proper chippy still uses slotted screws if requested. They come out of painted hinges easier than rounded out cross heads. Seem like you have little experience good sir.
@Funknwanker
5 ай бұрын
@@steveogburn6316the video is sped up
@joeljamesconroy
5 ай бұрын
That's the first thing I thought of when I saw that. Seriously. Not sure if you watched this all the way to the end. hopefully not it gets a lot worse. Fucking dumb the shit going on in this video. I'm the idiot who watched it I guess.
точильный станок вещь закрепляй болгарку на мертвой точке барашками а не шурупами.
ты уже определись или в сантиметрах указывай или в дюймах
❤❤❤
Spin top cost a dollar 😂😂😂
very clever.
muito bom mesmo
Absolute madness.
marvelous
Метрическа система измерения сущестует!
2nd one is dangerous, no safety. 3rd one is wiggling..not properly fixed.
❤
Откуда у него еще все пальцы? Игры с болгарками до добра не доводят
The blade sharpener was awesome... truly brilliant. You are a genius!!!!!
Not a tape measure in sight!
Good luck.
не показывайте это видео Доктору Дью, иначе у него случится пердечный сриступ!
То как все собрано развалится через 30 мин,или руки нахер поотрывает,что бы этому самоделкину их и по отрывало!!!
Smart.
Hab nur den Teil mit der flex. Säge gesehen, ich habe da noch einen Tip! Junge kauf dir lieber eine richtige Kappsäge bevor deine Hände Geschichte werden. Das sieht sehr wackelig aus. Sowas ins Internet zu setzen sollte schwer bestraft werden.
last one is bery risky
Não dá pra entender bolufas só eu pra perder temp😅😅😅😅😅😅
crazy
Opan the childdudh memory.waw.
What the hell is sabotaging !?
❤❤❤❤❤❤❤
Like it
🙏👍👍👍❤️❤️❤️
круче херни я еще не видел)))
Хочешь убить диск !!!!,???? Повтори!!!!
❤🎉😮
🎉🎉🎉🎉🎉🎉🎉🎉
Люфт ,у мебельных направляющих,ещё тот!!!! Фигня на посном масле!!!!
Few cuts is all what it takes to clog the drawer slides, sorry for the time I wasted watching
👍✌️✋️🙏🙏🙏🙏🙏👍✌️✋️👍✌️✋️
Ну первая самоделка ещё куда не шло,а 2я и 3я полный отстой,ни надёжности ни точности👎👎👎
Maldita mosca
😂😂😂 what about different angle on teeth? 😂😂😂 Another useless waste of time 😂