I have new codes for Fathers Day! I have 16 codes for Active 2.3 use code KEAVFATHERSDAY23 and for Active 2.0 use KEAVFATHERSDAY20

@HiddenFreedom

2 ай бұрын

Thanks for the code. Much appreciated! Excited to wash my 94' Supra with this.

@CarsWithKeav

2 ай бұрын

@@HiddenFreedom Dude! Bad A$$ car right there!

@stevenreiman5601

2 ай бұрын

You are the man I can’t believe I was able to snag one of your codes! Ha, if you remember I decided to cancel big boi pro as it was too expensive/ heavy for me, and now I’m canceling my original 2.3 order to use your promo. keav saving me money! Good man.

@Jonathan-pr1wo

2 ай бұрын

@@CarsWithKeavjust purchased one as well using your code. This will be an upgrade coming from a Ryobi. Time to retire that one. Thanks Keav.

@DimensionMachine

2 ай бұрын

Just used it and I thank you!

I have been using this same preasure washer sprayer gun from Amazon since around 2018ish 2019. Never any leaks, and I have abused it and dropped it and thrown it anywhere. I got it just for the swivel, and like you mentioned, how it's shaped. I love it.

@CarsWithKeav

2 ай бұрын

That’s awesome! Sounds very durable.

Although I'm just a DIY guy that's happy with his little $99 Greenworks pressure washer, I thoroughly enjoy watching these video reviews of pressure washers that I'll never need and never afford. Thanks for all your work Keav.

@CarsWithKeav

2 ай бұрын

You’re welcome and nothing wrong with rocking a Greenworks!

MOST ANTICIPATED REVIEW!!!! Love the consistency Keav!

@CarsWithKeav

2 ай бұрын

Thank You!

Code worked perfect! $585 out the door! Thanks for your reviews of the new products. This is what I was waiting for before I decided between the Bigboi, 2.0, & 2.3. I think the extra $ for the 2.3 is well worth it for the serviceability alone. Thanks for the video and code!

@CarsWithKeav

2 ай бұрын

It’s a crazy time right now never before have we had so many new choices and to me no wrong decision can be made as they are all good.

Great information, very solid review. The bloopers are hilarious

@CarsWithKeav

Ай бұрын

Thank You!

glad to see your video on this, cant wait to get mine and start using it. great to see affordable mid/high range pressure washers.

@CarsWithKeav

2 ай бұрын

Let us know your opinions on it bro.

Some really good information here. Great video!

@CarsWithKeav

2 ай бұрын

Thank You

Great review, dude, I am excited to see how this does over the long haul!

@CarsWithKeav

2 ай бұрын

You know I’ll be putting it to the test!

I may end up purchasing this as I am in need of a new pressure washer. Looks legit! Great review! Always love that you leave the bloopers!!

@CarsWithKeav

2 ай бұрын

Bloopers show the vibe behind the scenes and makes editing a little more fun.

Fantastic testing and thank you for the dimensions, very helpful.

@CarsWithKeav

2 ай бұрын

You're Welcome

Just got it using your coupon! Thanks so much, Keav. Really appreciate all the work you put into providing free content to us all!

@CarsWithKeav

2 ай бұрын

You’re Welcome!

i am not a detailer, but man i love your channel !! great stuff !! i will be getting a whole set up soon. thanks for all the reviews.

@CarsWithKeav

2 ай бұрын

I’m a fake detailer so not a detailer either. 🤣 Just an enthusiast having fun. Good luck on the setup!

Such a good video Keav. Thank you for all your work, for the culture.

@CarsWithKeav

2 ай бұрын

Appreciate that!

Fantastic, great video. Awesome review. Thank you

@CarsWithKeav

Ай бұрын

You’re welcome

Excited for this one! 💪🏻👌🏻

@CarsWithKeav

2 ай бұрын

Me too!

Thank you Keav. I’m one of those who got the discount w your code. Ty.

@CarsWithKeav

2 ай бұрын

Glad you got one they sold out 3 times!

Impressive. Nice video Keav

@CarsWithKeav

2 ай бұрын

Thank You!

So happy to see this review. Still waiting on mine from Adam's pre-order as they have changed the date three times. This thing is going to be amazing with my pf22.2. I think another thing to point out when it comes to longevity is they are doing a 2 year warranty for residential use. That really sold me on the unit.

@CarsWithKeav

2 ай бұрын

Yeah the two year is a big thing. I think it will have good longevity. When I pre-ordered with Obsessed garage for the 2.0 it was multiple date changes as well and I bought a second one form Active and it came quicker. They have to receive at their facility first then send it to Adam’s which includes a border crossing and customs.

As a content creator for my current as well as past employers, I very much enjoyed the blooper reel at the end. So real, I felt every moment. 😫 Great work and appreciate your efforts! I'm probably going to buy the new Active 2.3 based on this review! 💯

@CarsWithKeav

2 ай бұрын

Thanks so much! It makes the editing a little more fun as well.

@afolgarage5358

2 ай бұрын

@@CarsWithKeav Very true! Also eats up precious SD Card storage space! Watching the AR630 video now… man, I’m torn.

Been waiting for this one! I’ll have to go check, but i think i got one of the units with the 4.2 nozzles

@CarsWithKeav

2 ай бұрын

Wow, mine was the 4.6 maybe some initial ones got the 4.2?

@TheCarDetailingChannel

2 ай бұрын

@@CarsWithKeav I was wrong. The 40 degree says 40046

you the man Keav, love these reviews, you got me into the DI systems and now making me buy a 2.3 when technically I dont need it.

@kwhall3

2 ай бұрын

Same here on both things!

@CarsWithKeav

2 ай бұрын

I’m here for the economy. 🤣

@CarsWithKeav

2 ай бұрын

Keeping the economy going. 🤣

Ready can’t wait

@CarsWithKeav

2 ай бұрын

Me too 🤣

Riches with Keav's does it again. Beats JoshV... Great review.

@CarsWithKeav

2 ай бұрын

Thank You, I finally beat him to a product review. 🤣

I have been waiting for your vid, and man am I glad that I did. Just ordered it with your code. Thanks so much for saving me 64.00 which should be enough to order a 'real" foam cannon. It is sure to be a big upgrade over the giraffe tools all in one wall mounted unit that I have been using which can be heard from 2 blocks away! Thanks for the great vid!

@CarsWithKeav

2 ай бұрын

Does your Giraffe have that crazy thud sound when letting go of the trigger? Sounds like a sledge hammer hitting the wall. 🤣 They work though. You’ll be amazed at the difference when you try the 2.3.

@DimensionMachine

2 ай бұрын

@@CarsWithKeav Yeah, It was a good starting point, and the form factor cant be beat, but honestly it is a trud all the way around. The sound is one of the most awful things ever, the hose is cheap and kinky and the ou put is not very good. Yes it sounds like it is going to break every single time it shuts off. it is also mounted on a wall shared with the house so it is almost as loud inside the house as it is out in the garage. I do love that it has 100ft of hose, and again the looks and formfactor are great, but it is total garbage overall. I wish I had the 300 bucks back, but I have used it for a year and if nothing else it has proven that I can justify spending more on a more prosumer level machine. Thanks again for the vids!

@CarsWithKeav

2 ай бұрын

@@DimensionMachine No problem! Glad to help.

Keav, been waiting for this review. I'm glad I waited, as I've seen one other review in Canada, and he did not perform the GPM and amp test, left it up to you, IMJOSHV and OG to do it. Was on the fence with Big Boi pro and Active 2.3 and when active released 2 videos claiming the unit is serviceable, that made it even more enticing. Your video and the discount code, brought this unit well within purchase territory . I ORDERED IT JUST NOW!!!!!!!!!!!!!!!!!!!!!!!!!

@CarsWithKeav

2 ай бұрын

Awesome! Serviceability and rebuilding were big things they really didn’t answer till the last few weeks. Everybody was debating if it was going to be serviceable.

Should’ve had a drain and fill bolt for the oil. You can change the oil of any “sealed” pressure washer the same way active showed in their video. Also now I know why my Portland pressure washer intermittently surges, I thought it was a bad pressure switch but it must be the uberflex hose I use. Great video as always!

@CarsWithKeav

2 ай бұрын

The design of the 5 piston pump doesn't allow the room to have the oil filler or drain plug is what I have been told without compromising anything. Its possible on the Portland, but could just be the unit itself. I might have to expand my testing, but Uberflex has always worked well on all the cheaper units I have reviewed.

No way!! You got yours!! Man I’m bummed, I preordered this too!!😂 can’t wait for mine, but I thought on their website it said it came with a steel braided hose and short gun.

@CarsWithKeav

2 ай бұрын

The hose it comes with is steel braided and it is a gun just a crappy gun. Wish it came with a short gun. 🤣

@CarsWithKeav

2 ай бұрын

@@nick-3808 I just got tracking info in my shop app for the one I pre-ordered from Active.

Saved 10% on the preorder thanks to your code 👍

@CarsWithKeav

2 ай бұрын

Awesome!

Man… that thing is a beast!!

@CarsWithKeav

2 ай бұрын

Agreed!

Woot woot, going to order now.

@CarsWithKeav

2 ай бұрын

Hopefully discount codes are still there when you do! If not I’m hoping to get more.

Thanks so muck Keav just used your code. I look forward to unboxing this puppy. I currently own a AR 630 and as wonderful and amazing as it performs I can't utilize it properly on my mobile rig with my generator seeing how it trips often. I love the AR but it becomes a nuisance after a while given my particular situation.

@CarsWithKeav

2 ай бұрын

Let us know how this works in a mobile setup. Curious to see how this goes in a high volume setup.

Keav, been recently watching your videos and becoming a fan! I wanted to ask to see if you can do a comparison between the Active 2.3, Bigboi Pro, and the AR 630 TSS? Also will you be getting the Kranzle K1322TS? I'm in between all of these and I love how you test and I believe your opinion as honest vs some of the other channels on KZread.

@CarsWithKeav

Ай бұрын

I think I will end up getting a Kranzle the channel is doing good and I have enough money to get one now. I am also right in the middle of making a comparison video between 2.3, both big boi, AR630 TSS and the Comet 1700. SInce its 5 pressure washer I will just pick the best nozzles that get them all at the same PSI between 950 and 1K and just do those numbers. Ill also report issues brought up in the comments and what I have experienced and I talked to IMjoshv and will give some input he gave me when it comes to using a generator with them.

Can’t wait to receive mine Wednesday for my wash bay

@CarsWithKeav

2 ай бұрын

Awesome! Let us know how it goes!

I was debating to get this when I was searching for a new pressure washer. But just recently upgraded from a ryobi 1800 to the active 2.0 and I am blown away. I ended up going with the 2.0 as being mobile it’s smaller and also half the price. I would probably get this for the garage though. Seems like a nice midrange priced washer.

@CarsWithKeav

2 ай бұрын

2.0 is a great machine and unmatched in size and portability. Nothing that small can perform like that.

Damn! Can’t wait until this arrives in Australia

@CarsWithKeav

2 ай бұрын

Hopefully they start changing the plugs out on these and send them down under!

That thing looks stupid good!

@CarsWithKeav

2 ай бұрын

It is!

Hi man great review as always, What’s your suggestion for one time purchase and not changing or regretting, ar blue or bigboi or active 2.3 or kranzle ? Thanks for your time reviewing all the good stuff

@CarsWithKeav

2 ай бұрын

Kranzle is so much money for me. I’m going 2.3 just because of the numbers. I’ll probably end up reviewing a Kranzle in the end just because it is requested so much.

@ase826

2 ай бұрын

@@CarsWithKeav I wish active where making worldwide shipping specially now with the discount code you’re offering

@CarsWithKeav

2 ай бұрын

@@ase826 yeah, that sucks hopefully it happens at some point.

Thanks for taking the time to share your knowledge. How does the delay (I think you call it "ramp up" in the video) compare to your Kranzle?

@CarsWithKeav

17 күн бұрын

It’s about the same Kranzle has a bit more kick to it. The Active is a little more linear. The timing is the same on most all these types of pressure washers.

@ILruffian

17 күн бұрын

@@CarsWithKeav Thanks much for the reply.

Wow, I hadn't looked at any specs or other videos yet on the active 2.3. But this shocked me at what the numbers are. Plus the cage soecs and it doesn't sound too loud, actually sounds better than the 2.0. If I had the funds, I would buy one right now. The discount code, free shipping and no tax. That foam blaster is a joke, I agree on that and not sure what active was thinking. I wish I had my setup figured out as it is I don't get access so easily to wash my car unless I go to a friend's house. But I tell you, the price and it surplants the AR630. Oil maint and sound, those would be a good trade off to me.

@CarsWithKeav

2 ай бұрын

Everything you said is spot on. Hope you get that setup finished and the way you like.

Sweet!!! I am more excited to receive this unit. Thanks for the review. Do you happen to know or maybe you can get an answer faster than the rest of us from Active…. With 50 hours first oil change then at 100 hours etc after, is that 50 hours of the unit being powered on or 50 hours of trigger pulled? And thanks for the discount code. Now we just need Active to get their accessory kit out with the new foam cannon and longer hose.

@CarsWithKeav

2 ай бұрын

I’m am waiting for that foam cannon just to drop test it. 🤣 50 hours of the motor being used so whenever you pull the trigger till when you let go is part of the 50 hours.

nice cant wait to get one im still rocking my v52 originator !

@CarsWithKeav

2 ай бұрын

Nice, still got my VE52 on display in the garage.

@DJJDSKREWED

2 ай бұрын

​ @CarsWithKeav I just got it warranty because I think like you said in the video about the 2.0 over long period of use it messed up its pressure cut off switch they warranty it tho new one is on the way talk about customer service I am def a Active pw customer for life look forward to seting up a detailing van with the 2.3

@CarsWithKeav

2 ай бұрын

@@DJJDSKREWED That’s great got to like a company that has good customer service. Makes you forget about a little noise with a pressure washer.

@DJJDSKREWED

2 ай бұрын

@@CarsWithKeav we got a big 350cc generator running to run it cant hear it any way lol :P

Of course you already have it😂 knew I could count on you…I want the Active 2.3 so bad but my VE56 still has about another year of life left before it grenades lol

@CarsWithKeav

2 ай бұрын

Can’t go wrong with the VE56. I gambled on the Carzilla purchase and it paid off getting it here early.

Great review Keav. I just picked this up. Guess my Uber flex hose is going in the bin. 😢

@CarsWithKeav

2 ай бұрын

That sucks, give it to a neighbor running a Ryobi so at least someone gets to use it.

Hello everyone including Cars with Keav Let me start by saying that received my 2.3 today. Ordered on Monday and received on Friday @10 am by FedEx. The box was in good shape for the weight of this unit. I attached my 50’ braided hose rated @5000psi to the 2.3 and changed the orfice that active gives you for the after market foam cannon in my case the MTM foam cannon, and started the testing. I bled the line of air and I noticed more water flow from the gun, no nozzle. Using the stubby gun and attached actives included 25 and 40 degree nozzle to and immediately notice how much more water the unit was pushing and the force of the water….amazing😊 The the MTM foam cannon was next and put maybe 100ml of 3D foam cannon soap to about 300ml of water and the shaving cream of foam was amazing, I could never achieve this quality of soap with my 2300psi with 1.2 gal/min old induction pressure washer. As for the loudness of the unit, honestly from my old unit to this one. The 2.3 is infinitely QUIETER. I get the side by side comparisons to the big boi pro and duo that it’s louder. But honestly, the 2.3 is quiet I can talk to people as I work. If any of you guys are on the fence, don’t be this unit performs and brings detailing to another level…. It’s worth it!!!! With the 10% off and no tax and free shipping from Nevada to California in 4 days from order , this is a win!!!!

@CarsWithKeav

2 ай бұрын

That’s awesome. The sound doesn’t bother me either, but it could some. Man if they would have the sound dialed in this would be the easiest choice over the others.

@lexist2112

2 ай бұрын

@@CarsWithKeav your review of the big boi and Active is in point. You really did a great job in presenting the real world performance. With your 10% off with Active it was a no brainer. Great quality for the money. Once again the sound of the motor is still very quiet and very good. Keep up the vids looking forward to upcoming ones

@CarsWithKeav

2 ай бұрын

@@lexist2112 Appreciate that. Got some cool stuff coming.

@CarsWithKeav So, is that Active 2.3 still on your shelf, or have you gone back to the AR630? Wanting to get a replacement for the Pro on order (it will be going back ... Tired of the issues), and the results you got on the 2.3 have my attention. Thanks Keav!

@CarsWithKeav

24 күн бұрын

Active is still on the wall nobody has complained about the noise yet.

I was worried about the 1.45 orifice and it not foaming well but this video put my worry to ease

@CarsWithKeav

2 ай бұрын

With this kind of flow it will foam great no matter what. This is Gas pressure washer flow territory.

@YuriTarded-hf1nv

2 ай бұрын

How on earth did you think this thing wouldn’t foam well? You can get awesome foam with a 1.4gpm unit

@itzjonjon69

2 ай бұрын

I have a 1.2 gpm with a 1.1 orifice and it foams like doodoo

@YuriTarded-hf1nv

2 ай бұрын

@@itzjonjon69 yeah I would say 1.2 is on the low end but would still produce adequate foam for the intended application

any chance you can do a spreadsheet comparison for psi, gpm and amperage between the more common nozzle like 3.5, 4.0, 4,5 and 5.0 as well as an amperage for the most popular orifice sizes? just trying to see what 40degree nozzle and orifice i should get? thanks

@CarsWithKeav

2 ай бұрын

I'll put it on the list, but I am at the limits of my extra time already. I will try and do something when I do my full comparison video between the Active, AR, Big Boi and Comet.

Sounds like a 2.3 giveaway to me ;)

@CarsWithKeav

2 ай бұрын

Will be an Active 2.3 and an entire wash setup for my 20k sub giveaway.

Detailed Hose Performance Comparison: TLDR: Very satisfied and impressed with the ability to run a 100' Kobrajet hose. If you're on the fence with getting a longer hose and think you could ever use the extra length, go for it knowing you won't take any performance hit. Got my Kobrajet 3/8 100 foot blue hose (steel braided). It's working flawlessly with no hesitation shutting off when releasing the trigger. I ran a flow and pressure test with a few different hose setups. I tested each configuration 3 different times to reduce error. This was all with my garden hose supplying 60 PSI and 6.5 gpm using the stock 4.6 nozzles. The setups were: the stock 40' hose; the 50' Uberflex; the Uberflex+stock hose (90 feet); and the 100 foot Kobrajet. With all of them the flow rate was 2.16 gpm, each within 0.03 gallons of each other with no repeatable advantage for any one setup (water weighed on calibrated scale). The stock hose and Kobrajet are giving ~810 PSI; the Uberflex ~800 PSI; the Uberflex+stock hose was ~790 PSI. Admittedly, the pressure gauge is hard to tell if there's a change less than about 10 PSI since the graduations between lines is so small, but from many tests there is not a considerable change in pressure between any of the setups. The ONLY real world difference between any of these setups was the time to achieving full pressure. I took a video of the gauge and measured the times from pulling the trigger until reaching full pressure. The stock hose is the quickest on the pressure gauge taking ~0.75 seconds to reach full pressure; the Kobrajet 100 foot was ~1.5 seconds; the Uberflex and Uberflex+stock hose were ~2.3 seconds. In use you don't notice any difference when using the Kobrajet, but you do notice the slight delay from trigger pull to ramp up using the Uberflex, as shown in other videos. Not sure why I'm only getting around 800 PSI, but my gauge could very well be mis-calibrated as it was an Amazon buy and not an expensive calibrated gauge. It's at least repeatable and shows differences with other setups I've tried it on. The flow tests are very accurate as I used a high end calibrated scale. Foam Canon: With MJJC Pro and included 1.45 orifice I'm getting ~800 PSI at 12.5 amps. With 1.25 orifice was getting 1250 PSI at ~17 amps with the pump sounding audibly like it was working harder. Conclusion: I was surprised to not see any difference in the flow rates with any of these hose setups. This could be due to my setup, errors, or resolution of measurement. The internet would make you believe the flow and pressure will take a huge hit and the pump will work harder when running a 100 foot hose. Physics also says this, but looking at Hazen-Williams or Hagen-Poiseuille equations shows that increasing the diameter to be a much bigger factor than length. In my tests I simply did NOT see any discernible difference between any hose with respect to flow, and only the slightest change in PSI that was hard to even discern on the pressure gauge. I know I've heard Matt at OG mention he hadn't seen any difference when using 100 foot hoses, but again all the keyboard warriors will tell you it's a bad idea, when (at least in my tests) there's no difference. The pump also did not appear or sound to be working any harder with the longer hoses, and with the Kobrajet hose I'm pulling a consistent 12.4 amps. I'm still waiting on a Coxreel to put the Kobrajet on, and part of me wonders if there will be any change using the reel since it has a 90d elbow connection, which in theory could reduce flow due to increased turbulence but I honestly doubt it will make a discernible difference. Will update if there's any change. I think these pressure washers are just not moving enough water to see any real world hit to performance. Maybe if I was testing with an 8.5 gpm gas unit it would be different... But, for my particular unit of the Active 2.3 it is no problem and you should consider going for the longer hose (steel braided) if you think you will ever need it.

@CarsWithKeav

Ай бұрын

I would not except any change in flow due to the inner diameters being more than enough for the flow needed I would expect going beyond 100 feet you might start to see pressure drop on a 1/4 hose. Might even see pressure drop on a 100ft 1/4 hose vs a 3/8, but I don’t have that length to even test. Uberflex makes sense taking longer since it expands beyond its actual diameter due to not having braiding to control it.

@BradRussellisAwesome

Ай бұрын

@@CarsWithKeav for sure I think when going longer, a 3/8 hose will more than make up for any increase in length. If you really want to deep dive check out the Hazen-Williams equation and you'll see that diameter makes a way bigger difference than length. I think you're right on the money about the Uberflex expanding which would absorb some of the pressure energy which is probably why we're seeing the differences when using it vs the steel-braided. Anyways, hope this unnecessary deep dive will help anyone else with the same curiosity haha!

@CarsWithKeav

Ай бұрын

@@BradRussellisAwesome Never unnecessary when you have quality info!

What is the best and most flexible 50' steel braided hose? I'm having surging issues with my V52 and the Uber flex hose. Great review thanks!

@CarsWithKeav

2 ай бұрын

VE52 did have issues with the pressure switch on 50 ft 3/8 hoses depending on if it’s an older model as they updated it over time. I would stay 1/4 inch hose with the VE52 many really like this one. amzn.to/3We9uvm

Keav, I used your code to buy the Active 2.3; Thanks! Any thoughts (pro and con) on mating the included stock 40' hose with the Active 2.0 stock 25' hose with a hose coupler, yielding 60' of steel wrapped hose?

@CarsWithKeav

2 ай бұрын

I see no problem with that as they say you can go to a max of 100 feet on the 2.3

Awesome Keav, I was wondering if the active 2.3 wants to jump off the shelf without the wall mount bracket on because the active 2.0 wants to jump right off the wall shelf ones on

@CarsWithKeav

23 күн бұрын

It doesn’t move at all from the month I have been using it so far.

Hi Keav. What’s your thoughts on this washer compared to the BigBoi WashR Pro?

@CarsWithKeav

2 ай бұрын

2.3 all day unless you are running a high volume business then I would go Pro.

Excellent video as usual

@CarsWithKeav

2 ай бұрын

Thank you!

nice review,, beating out Josh lol, i couldn't wait for the 2.3 or BigBoi, so i got the Kranzle 1622TS.

@CarsWithKeav

2 ай бұрын

Can’t go wrong with a Kranzle! Finally got a video out before Josh!

This looks fantastic. I'm real curious to see the longevity of this one.

@CarsWithKeav

2 ай бұрын

This is the only thing we don’t know yet which is what sucks about reviewing brand new products that’s the one question we can’t answer.

@wescat2

2 ай бұрын

@@CarsWithKeav if it goes on the shelf we'll find out 😁

@CarsWithKeav

2 ай бұрын

Oh, its there!

Hi would you recommend buying the bigboi washer pro or the active 2.3 curious!

@CarsWithKeav

2 ай бұрын

So I think 2.3 all day if you are a home user or light detailer. High volume business I think the Big Boi Pro is the way to go.

Let’s gooo!

@CarsWithKeav

2 ай бұрын

I got the them song playing!

What steel braided pressure washer hose do you recommend?

@CarsWithKeav

2 ай бұрын

I like the Blushield Kevlar hose which is stronger than the steel braiding, but way lighter.

It sounds like the general consensus is that the 2.3 frequency response is better, though it is quite a bit louder. The 2.0 frequency response is concentrated more in the higher frequencies, while the 2.3 is in the lower range. Also, yeah my uberflex 50 foot hose is garbage and does the surging thing.

@CarsWithKeav

2 ай бұрын

I’ve heard many so they use Uberflex with AR and Kranzle without issue so wondering if it’s just Actives design that doesn’t jive with the Uberflex. Maybe the 5 piston pump design causes it? I like the sound way better than the 2.0 that is for sure.

@1BlinkwithAngels82

2 ай бұрын

@@CarsWithKeav I imagine maybe the higher end units have better pressure switches or something so it doesn't show up, but I really think the Uberflex hoses are terrible and everyone should try to use more rigid and braided hoses like you said. I got some random hose off of Amazon Vine for free (Coyardor brand) and it's way better than the Uberflex, seemingly because it is has the steel wire layer for rigidity.

I wonder if my uberflex hose was what was causing issues with my Ryobi. When I ordered my Big boi duo I also bought an Adams 60ft super flex sreel braided hose. That hose is very nice !!

@CarsWithKeav

2 ай бұрын

Did the Ryobi die? Have you been able to see if that hose works better on the Ryobi?

@markweber5278

2 ай бұрын

​@CarsWithKeav the main problem with the Ryobi was the surging and sometimes after releasing the trigger it didn't want to shut off. I haven't tried the Adam's hose with it .

What hose do you suggest for active products. I have a VE52 with a flexzilla hose at the moment. The stock hose was too short for my setup so needed a 50 foot hose. Too many options on Amazon to pick out the correct one.

@CarsWithKeav

2 ай бұрын

The 50ft gray non marking hoses are always a good buy on Amazon. amzn.to/4aSXp3a

Darn, I already have the AR630. This is making me wonder if I should sell that and get the Active 2.3. They’re comparable at different amp draws, both serviceable and setup for the 1.5mm foam cannon orifice that I got from OG.

@CarsWithKeav

2 ай бұрын

AR630 is a great machine. I have the easy decision since it’s for a review so I’m getting it anyways, but if I had a 630 and not making review content I would just keep rocking it.

Hey Keav! Looking into upgrading my pressure washer for my mobile unit. What unit would you recommend for mobile detailers? The 2.3 or 2.0? Running a 55 gallon tank which usually lasts about a car and a half depending on severity. I’m a little worried that the 2.3 may suck through the tank… but in reality it’s only be about a gallon more every 3 minutes. The 2.3 catches my eyes for the rinsing capability and noise level. Either way my generator is going to drown out the pressure washer noise, but I occasionally run the pressure washer off an extension cord. What do you think? Lol. Looking for a real honest opinion!

@CarsWithKeav

Ай бұрын

I responded to your DM on Instagram. For those wanting to know I don’t know enough yet about the 2.3 on a generator to be able to answer. Imjoshv had some issues getting it to work so not sure if it’s the generator not having enough juice or something else.

@CarsWithKeav Hey Keav, I use mtm hydro PF22.2 foam canon with 1.1 orifice. I can just remove the orifice from active canon and swap it with my mtm hydro orifice? I didn't know they were standard size. It seems you removed active orifice and put it in your generic foam canon. For a 40degree sprayer with at least 4.5 orifice. I would have to get MTM Aqualine 4.5 nozzle too. I do have McKillans nozzle but it is only 4.0 and that would get me a little over 15amps.

@CarsWithKeav

Ай бұрын

The active 2.3 should come with a 1.45 orifice that you can put into the MTM. Actuve cannon that comes with the 2.3 doesn’t have a removable orifice. You can remove the nozzle piece in the Mckillans nozzle and replace it with a 4.5 from MTM would be cheaper.

How do you establish when you’ve used it for 50 or 100 hours? It would be nice if there was a screen on the unit letting you know how long it’s been used or something to tell you that it’s time to change the oil. Like how a car odometer works so you know how many miles you’ve driven till your next oil change

@CarsWithKeav

2 ай бұрын

This is the problem there is no way that I know of, but I’m trying to figure it out. Problem is most hour meters are designed for gas or diesel motors. I’m just going for the good ole once a year. That an hour a week of straight trigger pulling.

Well Keav, this settles it. I've watched your Bigboi WashR Pro and Duo review in addition to the 2.3 review. I think I am going for this. There is simply nothing that outputs that much water at 15A or less. Just bought one with your discount code!

@CarsWithKeav

2 ай бұрын

I feel the same I’m all about the numbers and since all of these are new to market we have no idea which is going to have issue and which will last the longest. My money is in the Pro for longevity, but I’m an enthusiast and not a high volume commercial operation.

@RussellKasem

2 ай бұрын

@@CarsWithKeav Same! This will be for my vehicle, in my driveway.

@CarsWithKeav

2 ай бұрын

@@RussellKasem I think the 2.3 is the right one. Just sucks we have no idea how these are going to hold up over time it being so new, but I’m willing to give it a try we got the two year warranty worst case we get a new machine.

Very cool to bad for Uber flex and flexzilla 👍 thanks great video

@CarsWithKeav

2 ай бұрын

At least for the Active products there are issues with those hoses. I have no way to prove with any other product.

Hey Keav, any sound/db difference with the cage vs without the cage? I heard it’s quieter without the cage on…

@CarsWithKeav

19 күн бұрын

It’s a bit quieter without it not really from a DB measuring perspective though. There is less reverb from the wall of the cage and to me sounds better by itself. I’ve actually thought a good idea might be to try and sound deaden the cage and enclose it a bit more to help with sound. Most of the structure is already there to build a full cage around it.

great vid @CarsWithKeav longtime subscriber first time commenter... 100ft hose? 1/4 or 3/8? I am a BlueShield Aramid Kevlar fan. I have the 2.3, but wanted to see if anyone has tried a 100ft hose yet on it as I have read the 2.0 couldn't handle 100ft lengths, If the 2.3 cannot does the ar630? The stock 2.3 hose is nice I really do like it, but 40ft is not long enough for my needs and 50 is still not enough, 60 is most ideal in my case.

@CarsWithKeav

2 ай бұрын

100 ft for sure I would use a 3/8 hose. The 2.4 has been tested by Active to run a 100ft mtm Kobrajet type hose so you are good there as well.

Have you tried a 100ft hose with the 2.3? I tested with the 40ft included and auto start/stop worked great, then moved to my OG wall setup with 100ft and noticed it running for additional second or two after releasing the trigger.

@CarsWithKeav

Ай бұрын

Active says it’s good for 100ft and they tested with mtm hoses. I only have 50ft hoses at the moment.

@BradRussellisAwesome

Ай бұрын

Appreciate you posting this. I’ve been trying to ask around to see if it runs a 100’ hose as I just ordered a 100’ Kobrajet and had a concern it wouldn’t run it due to micro switch issues that were seen with the 2.0. I called Active and they said it shouldn’t be a problem with a steel braided 100’ but now I’m concerned. Guess I’ll put it through its paces and see. Will report back after I get the hose next week. Let us know what happens with yours.

@CarsWithKeav

Ай бұрын

@@BradRussellisAwesome Thanks, please let us know how it goes.

@BradRussellisAwesome

Ай бұрын

@maxs7976 See my recent detailed post about using the 100' Kobrajet. Conclusion is it works perfectly without any hit to my tested flow rate or pressure when compared against the stock 40' hose. Perfect start/stop function. Still waiting on my Coxreel, but don't see that changing anything. I've seen you comment elsewhere that your 2.3 isn't shutting off properly even when switching back to the 40' hose now? Any update as to how it's doing or if Active has responded to your concerns?

@maxs7976

Ай бұрын

@@BradRussellisAwesome Oh that is sweet, super helpful. I reached out and shared videos, it works perfectly with the 40' hose but switching to the 100ft OG hose wall setup behaves very similar to reviewers trying out uberflex hoses with a surge and multiple second delay. Active initially was going to replace the unit, but later said that's expected moving to a longer and larger diameter hose. Going to order a new one and if that doesn't work out will jump to the Kranzle.

Is there a quick connect/disconnect kit you recommend for this?

@CarsWithKeav

2 ай бұрын

It’s not cheap, but the quality is excellent. Viton orings and gaskets make this the best to me outside of say Mosmatic. amzn.to/3U8FcHG

Keav would you be willing to do a video on the best hoses to pair with the Active 2.0 or 2.3? I am looking to upgrade from my craftsman 1700psi and 1.2 GPM pressure washer to an Active 2.0 (or maybe VE52) and don’t wanna skimp on the hose

@Jonathan-pr1wo

2 ай бұрын

Kobrajet is a good hose. I got one similiar to it. I got mine from Obsessed garage. I forget how much I paid for it but it’s just as good as the kobrajet.

@CarsWithKeav

2 ай бұрын

I’m partial to the Blushield Kevlar due to its smaller diameter and being very light, but the gray steel braided ones on Amazon are good as well very close to a Kobrajet gray hose.

@Jonathan-pr1wo

2 ай бұрын

@@CarsWithKeav I have the OG version. It’s not a kobrajet. I think he said it’s made by Continental. I could be wrong though. Bought it about a year and a half ago.

@CarsWithKeav

2 ай бұрын

@@Jonathan-pr1wo yeah he makes his own lengths and they crimp it themselves I think. In the end to me they are all steel braided 3/8 just some have a more durable outer coating or jacket that sets them apart. If you are running a pressure washing business with crazy pressure machine then I would be much more concerned with the max pressure and build. With car washing pressure you are usually only 25% of the max pressure the hose can handle.

Hi Keav, My question here is regarding the "Active 2.0". What is your feeling on the optimal Nozzle Orifice size for the "Active 2.0" for Car washing as I want to settle on one size... stock 3.7, 4.0, 4.5, 5.0 🤔 Thanks for your videos... some of the most informative and food for thought ones around 👍

@cue03

2 ай бұрын

Stock setting is pretty solid from the factory. Then no need to buy more nozzles.

@MrSkeptical

2 ай бұрын

@@cue03 Hi Cue, I want invest in a couple of the better Rubber shrouded spray Nozzles and I am trying to understand the relationship and ratio of PSI versus GPM (flow) and it's effect on car washing! I might be over thinking it but I want to buy a bit higher end Nozzle once and be done. I was hoping that Keav or someone could provide some insight into the PSI vs GPM relationship and if a particular Orifice size is best suited and why 😉

@CarsWithKeav

2 ай бұрын

For me it’s the 4.0

@CarsWithKeav

2 ай бұрын

Agreed unless you want a nozzle guard then I pick the 4.0

@CarsWithKeav

2 ай бұрын

4.0 all day for me which is great as it is a very common size for nozzle guards.

A great unit but you will definitely want to wear ear protection if the main unit is nearby. Another channel measured 92 dB from a few feet away.

@CarsWithKeav

2 ай бұрын

92db that’s crazy I got like 88 next to it. I measure 86db from about 6 feet. Crazy though the 2.0 can hurt my ears and sounds way louder, but measures 81db

Hi, Keav, I got Active VE52 now with KobraJet 75 ft hose, it surges. Do you know if the 2.0 will have the same issue?

@CarsWithKeav

2 ай бұрын

VE52 was known to have an issue with hoses over 50 ft. they did an update to it in later models. 2.0 should be fine I would think.

Let's see

Keav, does the BluShield Aramid Braided Rubber Pressure Washer Hose work well with the active 2.3, any surges?

@CarsWithKeav

2 күн бұрын

Works great that is all I have been using with it so far. Just as strong as steel braided just much lighter due to the Aramid strainds.

In your honest opinion, active 2.3 or AR BLUE.. both are in the same price range. I have a dedicated 20amp outlet.. what about the Kranzle? The oil change on something you have to unbuild to means more problems long run as aposed to something that has a drain and fill. What's ur opinion

@CarsWithKeav

2 ай бұрын

If the drain fill is something you think will be an issue then I think Ar630 is the pick. I myself don’t think it’s that big of a deal to change the oil, but it’s all preference. Honestly the numbers are too much for me not to go for the 2.3. Detailing Enthusiast I’m not doing to use it at the volume or level as a business. More than likely 50 hours for me is probably at one year.

Very impressive...great review. I wonder what Matty at OG is going to say once he see the numbers. He has been on the nay...nay side.

@CarsWithKeav

2 ай бұрын

Curious as well, he will not like it if it can’t be used in a dual setup. He is too busy with all the remodels to probably even have time for it. 🤣

@YuriTarded-hf1nv

2 ай бұрын

Can I ask why you would wonder what Matt was going to say? Just curious why it would matter since we have now seen what this unit can do?

This is the machine I would get if I needed a PW today.

@CarsWithKeav

2 ай бұрын

I don’t need any of them I just want them. 🤣

@rubenharris9241

2 ай бұрын

@@CarsWithKeav right because when you switch over to rinseless washing, these machines will be taking up a lot of space in your garage 😏

@CarsWithKeav

2 ай бұрын

@@rubenharris9241 I’ll have lots of cheap used pressure washers to buy then and I’ll use rinselsss wash like it’s a soap just because. 🤣🤣

Would love your help on this. Side note this will be a wall mounted unit for home use only. I ordered 2.3 from Active, but it hasnt shipped yet. To set it up how I would like (new hose, reel, etc) I would be all in at around 1000. I can get Ar630Tss all in for 1200. Would I see much better results for the additional 200 or just stick with active. Thanks for the help.

@CarsWithKeav

Ай бұрын

The AR630 would have slightly less performance and at over 15 amps and is meant for a dedicated 20 amp and comes with the plug for a 20 amp outlet and will not fit in a normal outlet. Two things if you like quiet and have a 20 amp dedicated then the AR is the pick or if you want a machine that is known to be reliable. The 2.3 we don't know yet how reliable it will be, but it does more flow than the AR and at a higher PSI while still being under 15 amps.

@edwinvalerio8182

Ай бұрын

@CarsWithKeav I already installed a dedicated 20 amp circuit in the location where I am installing my pressure washer setup in case I needed it. I guess I will wait for the Active 2.3 and just hope it will last. I enjoyed your review on it. Thanks for the reply.

@CarsWithKeav

Ай бұрын

@@edwinvalerio8182 No problem. The good thing is in this category I have not reviewed a pressure washer yet that would be a bad decision.

@keav i cannot find the 1.45mm nozzle anywhere

@CarsWithKeav

2 ай бұрын

Did you get the 2.3 should come with one. If not it’s probably a custom size. Try looking for 1.4 or 1.5. Like these amzn.to/3UgbHny

To say Uberflex is beginner hose is crazy!

@CarsWithKeav

3 күн бұрын

Not really at least to me and with these much bigger machines a heavier duty steel braided hose is preferred and even recommended. Since it is using m22 fittings which is keeping within what they came with stock so the Uberflex to me would be the next step up in upgrades from the crappy stock hoses, but for sure not the final step in the upgrade path. I used one for awhile and after the hype wore off I’m glad I went back to my 3/8 hoses. I really don’t like anything about it anymore except it’s a much better option than most hoses that come with most cheaper pressure washers. Of course thats my opinion of course and others may think different. Many love them and think they are the best. It’s all subjective.

Can you do a video on bigboi spotless water

@CarsWithKeav

2 ай бұрын

I will be just waiting for them to become available to purchase.

I just ordered the Active 2.3 but I also want to order the DIC-20. The Active 2.3 requires 4.8 GPM inlet water and the DIC-20 will only accept 2.5 GPM. So are these two systems incompatible? Would the output of the DIC-20 be 2.5 GPM or would the output still be 4.8 GPM but only part of the water filtered? Could you please explain how these two systems work and if they can be compatible? Is there a water deionizing system that outputs a high GPM or would this be super expensive to maintain? I'm guessing you would go through resin twice as fast. I feel unsure of what I should do.

@CarsWithKeav

2 ай бұрын

There are systems that can handle much more GPM and no it would not go through resin quicker it’s about surface area and the time needed to properly filter. The smaller the unit the longer it takes to filter. The 2.3 GPM might be an issue just can’t say for sure yet. Thing is if you run full blast through the DIC-20 you will get the 4.8 GPM and more, but it will not filter as good and probably have tds. My theory though is the 2.3 is only running that then it would limit the incoming flow making the water go through the filters at 2.3 GPM. I’ll have to test this and maybe make a video as well.

How would you have the system draw more AMPs than it wants, in this case 14. Amps are pulled not given. Honest question, I may learn something here.

@CarsWithKeav

2 ай бұрын

Changing the nozzle size to be smaller makes the motor work harder to force the water through which increases it’s draw in amp. Opposite for a larger size having less load/pressure for lower amp draw and since it’s larger more water flow as well.

Could you test with a 3/8 kobrajet(mtm) or is that the diameter of the second hose used? Cheers

@CarsWithKeav

2 ай бұрын

Second hose is 3/8 and very similar to Kobrajet just uses Kevlar instead of steel for the braiding. I should have said that in the video thanks for bringing it up. 🙏

@phebert6852

2 ай бұрын

@@CarsWithKeav that’s what i thought, it looked like it was, but just wanted to be sure! Cheers!

If your starting to detail a few vehicles what would you use the Active 2.3 or the Big Boi Washer Pro? Seems the BB has better numbers

@kellyk7553

2 ай бұрын

BB is considerably more and for that I would do the ar blue

@adamrusch7112

2 ай бұрын

@@kellyk7553 You must live in a different area of the US because the Big Boi is cheaper than the AR by $200-300

@kellyk7553

2 ай бұрын

@@adamrusch7112 I am talking about the bbwashr pro not duo

@CarsWithKeav

2 ай бұрын

Active has the better performance numbers it’s really up to sound and the environment. Business I would go Big Boi Pro and home 2.3 if you don’t mind the noise. It’s doesn’t bother me.

@CarsWithKeav

2 ай бұрын

That must be the duo the pro is more comparable to an AR. Duo is not in the same league of the Pro or AR to me. You can get AR630 free shipping for $765.

Keav, would you recommend a 4.5 or 5.0 orifice for the Active 2.3?

@CarsWithKeav

2 ай бұрын

I’ll be rocking the 4.5 in 40 degree and the 5.0 in 25 degree. I’ll probably use the 4.5 more often. I’ll need several washes under my belt before I make a final decision on it.

@jschan

2 ай бұрын

@@CarsWithKeav I was thinking 4.5, but looking forward to any updates you might have.🙂

@CarsWithKeav

2 ай бұрын

@@jschan Sure thing

Serious question here as to this process stated by active. Shutting Down and Cleaning Up 1 Turn off water supply and disconnect the garden hose from the water inlet on the pressure washer. 2 Pull the trigger to release any remaining water pressure. Set the ON/OFF switch to the OFF position. 4 Unplug the power cord from the outlet. 5 Engage the safety lock on the spray gun. Why would you ever unplug the water source and run ? This has me hesitant to do on my unit I currently have

@CarsWithKeav

Ай бұрын

Where did you get this info? Never heard of running a unit dry. I can reach out to them and find out if this is true. They are the manufacture so maybe their system is different. 🤷‍♂️ Plus normally if you don’t relieve pressure from the gun it’s really hard to disconnect the incoming water because of the pressure.

@mtiger5

Ай бұрын

@@CarsWithKeav it’s in the operating instructions booklet page 13 , 6.2 “shutting down and cleaning up”

@CarsWithKeav

Ай бұрын

@@mtiger5 Thanks I’ll look it up and ask them about it. Could be a translation problem possibly.

@CarsWithKeav

Ай бұрын

Active will be changing their manual as what was stated is not correct. They will add to release the water pressure before disconnecting the water hose. I’m questioning them on the on/off now since if you turn supply off, relieve pressure and disconnect the hose while it’s still turned on then it will run dry.

@CarsWithKeav

Ай бұрын

They responded about the on/off and will be making that the first step. Thanks for bringing this up so we can save some others some headaches.

I got a couple questions. Where do you live? I'm in Central Florida and are you a machinist? I use the pin gages for machining parts. lol

@CarsWithKeav

2 ай бұрын

I live in North Georgia. Not a machinist just found this is the most accurate way to measure orifice sizes. I used to use carb cleaner files, but the sizes are too spread out to be accurate.

@VictorHernandez-nt3tw

2 ай бұрын

@CarsWithKeav awesome. Just asked cuz I saw the Orlando sticker

I think the active 2.3 is the best option for me😮

@CarsWithKeav

2 ай бұрын

It was for me!

i have mine since 1 month and like you said, this unit really kick off, for me the only thing I don't like is the sound , its too loud.... I tested 3.5 nozzle just for fun and it was 1400psi, ..can you tell me how many amp you draw with a foam cannon 1.25 nozzle because I have my stock nozzle on my pf22.2 and didn't change it , I want to keep good foam but like I saw in your video the 1.45 seems good but tell me the amp draw with 1.25 nozzle please . thanks!

@CarsWithKeav

2 ай бұрын

pf22.2 will foam amazing with the 1.45 they supply believe me. 1.25 is going to put you in 16 amp territory. 3.5 nozzle probably over 16 as well.

@fishvtec7

2 ай бұрын

@@CarsWithKeav thanks for reply ! yes the 3.5 is probably more than 16amp.. but it was just for test im not run these nozzle , the stock one 4.6-4.5 are really great !! and Im probably swith my 1.25 nozzle foam cannon to 1.45. and between this one and washr pro which one would be your pick ?

@CarsWithKeav

2 ай бұрын

I pick 2.3 all day unless I all of a sudden became a very high volume detailer then the Pro would be my choice.

AR630, Big Boi Washer Pro, 2.3 no budget which pick?

@CarsWithKeav

2 ай бұрын

Business I say Big Boi Pro for the home 2.3 if noise isn’t an issue.

I just bought the 2.0 in November! Did I make a mistake?! Great video!

@DMCnME

2 ай бұрын

Same. Don't let FOMO get the best of you. The 2.0 is a great machine. That 2.3 is sweet though :)

@XL_BEAR

2 ай бұрын

For a weekend hobbies 2.0 is so portable to get out and bring back to closet. I have a feeling we are comparing two totally different uses here. This 2.3 is heavy and doesn’t look like easily portable unit.

@CarsWithKeav

2 ай бұрын

I don’t think so still a great machine for a good price.

@CarsWithKeav

2 ай бұрын

Agreed on this. FOMO is a horrible thing I have to get these things so it’s a different decision for me. If it was not for content I would probably still be rocking a VE52.

@CarsWithKeav

2 ай бұрын

Agreed on this the portability and size of the 2.0 is unmatched. I got it stuffed in a toolbox for a future video coming soon. Only one that would fit. 🤣

Hey Keav, What's a good steel braided hose to get for the active 2.0 that won't break the bank? I think I found in one of your other videos, the Corretic?

@CarsWithKeav

Ай бұрын

This one is a good price and well reviewed. amzn.to/4bQmNGN That is if you are looking for a 50ft that is very much like the stock hose when it comes to connections. Let me know do you were looking for a 3/8 or a 1/4 that has normal quick connects.

@dannysuarez6923

Ай бұрын

@@CarsWithKeav doesn't matter to me if its 3/8 or 1/4 I Just want it to work ok with the 2.0, I currently have a 50ft uberflex. 100 ft should still work fine right? I do have quick connects. Does 3/8 or 1/4 make any difference? Thanks

@CarsWithKeav

Ай бұрын

@@dannysuarez6923 If going 100ft I would suggest a 3/8 hose. 50ft there won’t be a difference between the two other than the 3/8 will be much heavier to move around.

@dannysuarez6923

Ай бұрын

@@CarsWithKeav Ok, so which is the recommended 100ft 3/8?

@Mike-tg8si

Ай бұрын

Keav: 50ft 3/8 Kevlar or 1-wire ok for ve52? Trying to consolidate and have just one hose for both my gas and electric PW. Oem active 2.3 hose is ideal on paper but only has about 2300 psi rating….which gives me some concern since I’ve got my gas PW pump tuned to output about 2500psi in the line (I use a 6.0 orifice to drop it to 1100 at the nozzle, for car use)

I don't see why for this price point, you wouldn't get the AR630TSS. It seems far more robust. Am I wrong?

@CarsWithKeav

2 ай бұрын

This replaced the AR630 that was sitting on my shelf. It is of the same quality. Same type of motor. Ar630 is more quiet, easier to change oil and over time has proven its reliability. It however will only work on a 20 amp circuit which limits the garages it will work in. AR630 after taxes is over $800 for me vs $650 to me that’s a big difference. You can’t go wrong with the AR630 though and it’s an amazing machine.

@BradRussellisAwesome

2 ай бұрын

I had this same dilemma. I’ve always wanted an AR Blue. However, even with no tax where I am, the AR is $202 more with shipping. With Keav’s coupon the difference stretched to $267 to my door which is not insignificant. Is the AR better long term? I have no doubt. But is it worth nearly 1.5x the Active 2.3? I don’t think so, especially not for a home gamer like me.

@CarsWithKeav

2 ай бұрын

@@BradRussellisAwesome Agreed, AR is an amazing machine and will no doubt last. For the home user especially 15amp 2.3 does it for me.

Keav since the Ryobi or Greenworks doesn’t have surging issues do you think it would work as a dual setup? Obsessed garage doesn’t want to test it, they tried the active 2.0 then gave up

@CarsWithKeav

2 ай бұрын

That’s a really good question I’m not sure the pressure switches are advanced enough to run together, but maybe it’s an idea for a video in the future. 🤔

@pantac4493

2 ай бұрын

@@CarsWithKeav yeah that would be cool and would give everyone a final answer on that. I’ve seen other pressure washer professionals use check valve on each jumper hose before going to the tee. In my mind that would stop water rushing the wrong direction and affecting the switches

@CarsWithKeav

2 ай бұрын

@@pantac4493 a lot of them need those check valves just for a permit perspective many places require them to stop chemicals and debris from going back to the source. I have a lot of research to do at least with lower end machines it won’t cost as much. Usually on the water hose side though and not the pressure washer hose.

@YuriTarded-hf1nv

2 ай бұрын

Why would anyone want to use a dual setup? No disrespect but that is just dumb

@pantac4493

2 ай бұрын

@@YuriTarded-hf1nv logic. this video is about a pressure washer that puts out 2.3 gpm. Two Ryobi’s would produce the same or more gpm for a way lower price if it works. Plus it’s redundant so if one breaks, the other is likely still working. Depends on the person, what kind of system makes sense for them or their business. It’s not a new practice, professionals for cleaning homes and parking lots/driveways have been combining pressure washers for years to get more gpm to get jobs done quicker