Google doc sheet listing all parts for this setup: docs.google.com/spreadsheets/d/1YdyQOuGelg3lG8bqruYH-2dkobIgIo1y5C8DFIpxGyc

@jasondickens9003

Ай бұрын

Nice job, what was your tds reading in ppm before the installation of the CR spotless filtration system and could you share the paint color and brand that you used to coat the garage walls?

Great video - one thing to mention and clarify however is that the Prevost fittings are anodized aluminum, not plastic. Nice work!

@jgo.m3

Ай бұрын

Thanks! Really appreciate you guys checking it out. And yeah, I saw that about the Prevost fittings after the fact.. my bad. Correction added to description.

I’m glad you clocked the shutoff valves like you did. I was yelling at the screen at 21:20 . 🤣 glad you finally saw it.

@jgo.m3

Ай бұрын

Haha! I almost cut that part out but I wanted to show the error of my ways 🤣

@g.dubyou6263

Ай бұрын

@@jgo.m3 haha! Glad it worked out. Maybe, if you didn’t see it, right away, you’d figure it, eventually. 🤣

Awesome wall setup!!!

@jgo.m3

Ай бұрын

Thanks man, appreciate you checking it out 👍

Great video brother. I got a tip for u on the water valve you can remove the screw on top of the handle and move it to your like position and screw it back on.

@jgo.m3

2 күн бұрын

Maaaaan.. wish I'd known that earlier lol. Fantastic tip bro, thank you!

Phenomenal video!!! Thank you for such detailed explanation of every step. Great step up. I will definitely be looking into rapid air set up. Thanks again for such a great tutorial

@jgo.m3

Ай бұрын

Much appreciated brother! Hope it helps for your setup 🍻 it's definitely a project but insanely transforms the wash process experience.

@26-CJ

22 күн бұрын

@@jgo.m3tip. We used a hair dryer to heat up the yellow stickers and as you heat it grab a corner and slowly peal as your moving the hair dryer across the sticker. Comes off perfectly. Then use some Goof Off the wipe any sticky residue. Spray it onto a peeper towel and wipe the residue off and your done.

@jgo.m3

22 күн бұрын

@@26-CJ awesome tip brother, thank you! 🍻

@26-CJ

22 күн бұрын

@@jgo.m3 our pleasure. We just finished installing our own setup. We used all the prevost pipes and fittings but this is cool as well. Didn’t know they made other fittings that worked with the prevost pipe. Are those blue fittings also prevost fittings. Sorry if you said and didn’t catch it.

@jgo.m3

22 күн бұрын

@@26-CJ all good, actually the pipe and fittings are from a company called RapidAir; it's their FastPipe kit. Same kind of aluminum pipe, but these are plastic fittings as opposed to the aluminum fittings Prevost uses.

Looks pretty sick, man. I’m not 100% confident in the plastic fittings, but then I’m no plumber either. I’m sure you’ll get many years out of the setup. The Kranzle would have looked better imo but the 2.3 is a champ up there. 😊😊😊

@jgo.m3

Ай бұрын

Thank you brother. You guys will certainly be the first to know if the plastic gives way but the internals look pretty solid and, after the first wash at least, everything seems to be holding up. And yeah man I definitely would have loved to have pulled the trigger on a Kranzle, but I'm beyond happy with the 2.3 👍

I had bad luck with coxreels with powder coat in the threads and just shotty QC..if bought from OG they are made sure they come perfect tho..still doesnt touch reelcraft, hannay, titan, etc..

@jgo.m3

19 күн бұрын

That sucks.. fortunately I haven't had any issues so far but good to know some other brands just in case.

How is the vibration on pressure washer on shelf , will not move out of shelf. Will not move ? Looks great Thank you for the video

@jgo.m3

Ай бұрын

Thanks! It's not bad actually and it definitely doesn't move. I wouldn't put the pressure washer on the front edge by any means but at 29lbs for the standalone unit, it's not going anywhere.

Pretty cool set-up! How are you liking it so far?

@jgo.m3

Ай бұрын

Thanks! It's ridiculously great. The time saved on set up and tear down alone is insane but add to that the upgraded performance coming from my K1700 and not racing to avoid water spots and it wildly improves the experience. I made a separate video on the Active 2.3 but, in short, it's a fantastic machine. Thanks for making it 🍻

@jgo.m3 nice job. Do you mind sharing what color and brand of paint you used on your garage walls? Thanks

@jgo.m3

Ай бұрын

Thanks man. The wall paint is Sherwin-Williams Fortitude (SW 9562).

So I have a 30x30 piece of 1/2 plywood I mounted using 4 hefty 7/16 x 2" long lag screws. Will it be enough to support the shelf w/ pressure washer along with the 100ft hose reel? Im obviously only going to be screwing into the plywood.

@jgo.m3

20 күн бұрын

Sorry bro, I wouldn't be the one to tell you if that will work. I don't know what shelf you have but if it's the 18 or 20" size, that should be able to go into the studs. For the hose reel, you should consider the backing plate since there will be added tension pulling on the hose as it comes off the reel.

If you wanted is there any reason why the pipe couldn't be used to hook to power washer? Nice video

@jgo.m3

27 күн бұрын

Thank you brother 🍻 I don't see any reason why you couldn't as long as your temps and PSI are within range. For temps, FastPipe can handle up to 140ºF which is about what residential tap tops out at so you should be good there.

@Max-jv3yg

26 күн бұрын

Best to keep the flexible/rubber to isolate the vibrations from the rigid pipe.

Curious why the Aluminum vs Copper? Aesthetics? Also curious how DI water will affect the aluminum over time.

@jgo.m3

Ай бұрын

Yeah probably and also I'd guess because aluminum is lighter and cheaper than copper. These systems were designed for compressed air, but they say it can be used with (non-potable) water.

What was you tds reading for ppm before adding in the CR spotless filtration system?

@jgo.m3

Ай бұрын

I didn't check, but the TDS rating in my area is about 215 and spots were very noticeable. I've done one wash with the CR tanks now and it's insane how well they work.