The best base oil - Alkylated Naphthalene

Ғылым және технология

Most people tend to think that polyalphaolefins are the top of the tree when it comes to base oils. But PAOs are so non-polar that they often encounter issues with additive solvency and varnish deposition, which necessitates a co-basestock in finished lubricants.
Esters on the other hand, are so polar that they suffer from hydrolytic instability, are hygroscopic, and sometimes out-compete lubricant additives at metal surfaces.
Alkylated Napthalenes are the "third way" lubricant - the best of both worlds.

Пікірлер: 71

  • @LubricationExplained
    @LubricationExplained2 жыл бұрын

    Looking for more structured lubrication courses? Join LE Pro for $30AUD per month (that's about 20USD). lubrication.expert/product/le-pro/

  • @LubricationExplained
    @LubricationExplained2 жыл бұрын

    I forgot to mention, they're also food safe, kosher and halal!!! The base oil itself is NSF HX-1 certified.

  • @darkknight1193

    @darkknight1193

    2 жыл бұрын

    The kosher and halal part had me laughing hard!!! xD

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    @Nunya Business Very very very thinly, hahaha.

  • @danielsolomon1710

    @danielsolomon1710

    8 күн бұрын

    Wadafuq halal hahaha

  • @duckylucky6505
    @duckylucky6505 Жыл бұрын

    Just came across your channel today. Great stuff! I used to be involved manufacturing AN, Esters and PAO's for a large oil company during the glory days of group 4 and 5 usage in engine oils. From an operations point, pure naphthalene is very difficult to handle, especially in colder weather. And as it's a batch operation like esters (PAO is continuous) it's more expensive to make by a significant margin than PAO. You're correct that putting the alykl group on different points of the ring yields different properties. Reactionwise, the hardest part is to get the alkyl group to hitch itself consistently to the same spot on the rings. We had to develop a proprietary catalyst to accomplish this.

  • @trevorgauntlett-jx8ub

    @trevorgauntlett-jx8ub

    8 ай бұрын

    Great insight! With over 20 years around ANs, you identify probably the main reason why there are only two players in the market. It's hard to make them consistently and cost-effectively. Of the two players in the market, one had already developed its downstream range before they decided to sell ANs. So, their R&D had almost all been completed & the downstream products were generating cash. As a result of the downstream product range, they can sell a wide range of ANs. The other (with whom I suspect you worked) had the resources to develop the two grades most likely to have a broad range of applications. The barrier to entry by either route is very high.

  • @AG-sx9ws
    @AG-sx9ws5 ай бұрын

    Absolutely love this chemistry lesson

  • @GPloyal
    @GPloyal2 жыл бұрын

    LE. Hats off to you. You are putting genuine efforts make concepts so simple to understand. Thanks lot

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Thanks Ganesh!

  • @maxmeier532

    @maxmeier532

    Жыл бұрын

    @@LubricationExplained Thanks for your video! Do you know whether naphthalene based oils are used in significant amounts as lubrciation in machines that are used for manufacturing other products? I couldnt find any data on it. There is some anecdotal info about products containing naphthalene and nobody knows why. Some years back Kelloggs had to recall some cereal and occasionally there's naphthalene in carseats for children or toothbrushes.

  • @Kingmanight
    @Kingmanight2 жыл бұрын

    One of my favs as well, had some solubility issues with a custom full PAO Diesel engine oil I made. A bit of Alkyl-Naph and a few other bits really helped.

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Oooooo. Custom DEO? Do tell!

  • @michaelzumpano7318
    @michaelzumpano7318 Жыл бұрын

    That was excellent. I appreciate your level of detail. You’re a good teacher.

  • @gusptz2395
    @gusptz23952 жыл бұрын

    Here in Germany the top oils from Ravenol, specially the racing oils, use to have AN on the formulation. Best Regards

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Thanks for sharing! That makes a lot of sense.

  • @YeiDCalle

    @YeiDCalle

    2 жыл бұрын

    U forgot Redline , Extreme Amg ( Produced by Venol in Germany) and Amsoil Signature Series

  • @alouisschafer7212

    @alouisschafer7212

    Жыл бұрын

    Now their high end oils are 100% PAO+Ester right

  • @johannesmajamaki2626
    @johannesmajamaki26262 жыл бұрын

    The thumbnail, the title, the three views (as of my seeing it)... it's marvellous 😀

  • @TrangNguyen-bm4oe
    @TrangNguyen-bm4oe Жыл бұрын

    I really like your Video i watched your video talking about base oils In your opinion, in the production of insulating oil, which is the better naphthenic and paraffinic base oils?

  • @ayildir
    @ayildir2 жыл бұрын

    What do you think about high viscosity AN’s such as AN having vis@40C of 300 cSt ? Its aniline point is 125. Do you think it can still be used as solubilizer? I have heard that this grade might worsen the shear stability if we combine with PAO to formulate a synthetic automotive gear oil like 75w-90. Thanks in advance for your comments :)

  • @theSquashSH
    @theSquashSH9 ай бұрын

    Great explanation of the chemistry, this was super helpful. One question, at one point you mention carbon double bonds are weaker than single bonds, but then later on you say they're less stable? In what cases are they stronger or more stable vs weaker or less stable? Thanks!

  • @chippyjohn1
    @chippyjohn12 жыл бұрын

    Nulon oil state that their Race engine oil is PAO Alk Nap, while Penrite state theirs is PAO ester. They dont say much beyond that. Penrite has little information on their oil blend and Nulon even less in specifications and data sheets. Thanks for the video.

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Thanks! Yeah, most of the oil companies are loathe to reveal much about the formulation which is a real shame.

  • @danielespinoza6006
    @danielespinoza60062 ай бұрын

    Only the part of the viscosity index which is very low, so it is very important to formulate mixed Technologies that helps to maintain good VI

  • @leandrolander02
    @leandrolander0210 ай бұрын

    Hello. What is the best types of oil for seals? And the worst ones? Thank you.

  • @shagulgupta4442
    @shagulgupta4442 Жыл бұрын

    Can it be used for grease formulation instead of Napthenic Base oil, will it be better? As you explained better solvency of additives.

  • @johnblankenship6323
    @johnblankenship6323 Жыл бұрын

    What do You think of Tungsten Disulfide as a oil additive? If it's as good as I have been told, than why hasn't it been used in engine oils.

  • @kahar_diy3955
    @kahar_diy39552 жыл бұрын

    I am so grateful if u make a video about sulphur in engine oil what additive did they use n how sulphur can harm the engine oil n harm the engine components???..please..thank you😅👍😁

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    There's a video on the channel which is "Zinc in Engine Oils". There's also another called "EP additives". Both of these should cover what you're looking for! kzread.info/dash/bejne/ZYSZ06yqo9aWcdI.html kzread.info/dash/bejne/qo6p0tWufse2cso.html

  • @kahar_diy3955

    @kahar_diy3955

    2 жыл бұрын

    @@LubricationExplained thanks a lot..sory i ask to much..i am just started to learn about lubricants..this is very helpful..i love your channel..keep it up @lubrication explained..👍😊

  • @libsrdum
    @libsrdum Жыл бұрын

    I think there could be problems with seals, especially Buna N. Steric hindrance could prevent the naphthenic from migrating into the rubber, but the R groups would still allow Buna N process oils, additives, etc. to migrate out. The seal would therefore shrink. This is why you never have a Pure Buna N formula. A non-oil resistant rubber is always in the formula so it can swell to compensate for the shrink of the Buna N which is oil resistant.

  • @trevorgauntlett-jx8ub

    @trevorgauntlett-jx8ub

    8 ай бұрын

    ?You're right, and it has probably been an achille's heel for some product developments. However, you also have to remember that one player makes ANs with branched alkyl chains, while the other uses predominantly straight chains. Success may be possible by using the nearest product from the other player and/or moving to a lower viscosity AN, which usually means less substitution, so less steric bulk. Or back out some AN and add a little ester. Not a simple task, I agree. But it's why formulators are skilled people.

  • @lesliedsouza4077
    @lesliedsouza40772 жыл бұрын

    Good ol' LE, Thrashes it out... Rings the bells... I would disagree at one aspect - An oil, mainly based on Ester or AN, would be specific, racing oil, application? They're expensive. Also, Don't want to change oil seals, too often, in real life... For practical use: PAO + AN as a polarized, hydro stable, additive "solvent" , would be nice? (eg: Mobil?) Cost effective "solution" = GIII, kinda uniform molecules, a bit polar? A bit less AN, with additives? :) Pl do a show, on how Esters or AN's swell seals & Explain the difference between seal swelling & pliability?

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    As far as engine oils go, yes, you'll probably never see a pure AN engine oil mainly because of its low VI. The only times I've seen AN oils are in industrial applications where you don't need performance over a wide temperature range, because most equipment operates at constant temperature for 99% of its life. In the engine oil world, you're right, it's most likely going to show up as a co-base with a PAO.

  • @MrTimstaaa
    @MrTimstaaa2 жыл бұрын

    When the oil label has one of the ingredients as" mono-c20-24-branched alkyl derivs " is this a form of alkylated naphthalene ??

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Good question - I'm inclined to say no, as this description is pretty common to detergents (comprises the long hydrocarbon chain of the detergent). From memory the ANs I've seen are C12-16 branches.

  • @ayildir

    @ayildir

    2 жыл бұрын

    This is Alkylated benzene

  • @swe5067
    @swe50672 жыл бұрын

    Is Heavy alkyl benzene a type of Alkylated napthalene..?

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    They’re a separate class of lubricant.

  • @jimmysturdevant9843
    @jimmysturdevant98432 жыл бұрын

    Do some digging on Schaeffers oil. I bet my life savings that it’s the best oil for the market. But their base oil is not very easy to find info on.

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Tried digging a little over the last few days and you're right - info is pretty thin on the ground.

  • @TonyTundra5.7

    @TonyTundra5.7

    Жыл бұрын

    ​@Nunya Business what you just describe sounds very much like modern politics just had to add 👍

  • @precisiont5188
    @precisiont5188 Жыл бұрын

    Can anyone tell me if Moly is a good lubricant for my engine oil? Not the company but the actual powder. Thanks.

  • @waynehung4801

    @waynehung4801

    10 ай бұрын

    Moly is good for engine by reducing friction but would recommend you use engine oil which contains higher concentration of Moly. Engine will running smoother.

  • @rileycopple7896
    @rileycopple78962 жыл бұрын

    Where can I buy products made of this?

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Good question. It's really difficult to know where this is in use, as companies don't typically disclose formulations where they don't have to.

  • @yahyanassar9205
    @yahyanassar92052 жыл бұрын

    Can you mention engine oil brands that contains Alkylated Naphthalene ?

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    I haven't really kept up with the engine oil formulations to be honest. As mentioned below, AN has a lower VI than parrafinics so it's not going to be the main base oil in an engine oil formulation, it's more a co-base that can replace esters in engine oils.

  • @yahyanassar9205

    @yahyanassar9205

    2 жыл бұрын

    @@LubricationExplained You are correct. I have been told, that "mobil 1 annual protection" use to have small quantities of AN.

  • @YeiDCalle

    @YeiDCalle

    2 жыл бұрын

    Ravenol,Extreme amg( Produced by venol) , Redline From Usa and Amsoil.✅💪

  • @i0001w

    @i0001w

    Жыл бұрын

    All Mobil 1 EP + Annual P.

  • @beissikbesariu5334
    @beissikbesariu5334 Жыл бұрын

    if you knew wat oil is based with an ? best regards your sibscriber

  • @shanepipkin4041
    @shanepipkin40412 жыл бұрын

    what gear oils you seen with this?

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    It's actually a Mobil industrial circulating oil that was discontinued just over a year ago. Real shame, I thought it had a lot of potential.

  • @fuzz378
    @fuzz3782 жыл бұрын

    Pao + ester is it good stuff?

  • @user-xe4yb5xc8t

    @user-xe4yb5xc8t

    2 жыл бұрын

    100% it is

  • @kahar_diy3955
    @kahar_diy39552 жыл бұрын

    Did alkylated naphthalene have sulphur in it????

  • @mytech6779

    @mytech6779

    2 жыл бұрын

    sulfur is an additive common in anti-wear packages

  • @kahar_diy3955

    @kahar_diy3955

    2 жыл бұрын

    @@mytech6779 yes that true..but i talk about sulfur in base oil..

  • @mytech6779

    @mytech6779

    2 жыл бұрын

    @@kahar_diy3955 Sulfur in base oil acts as a mild antioxidant. It is only removed as a side effect of the hydrocracking process for group 2 and group 3. Both natural sulfur and additives can in some conditions react badly with copper based metals, this is why some manual transmissions require GL-4 oil while the hypoid differential can use GL-5, the GL-5 has better anti-scuff protection but it can damage bronze in certain operating conditions.

  • @kahar_diy3955

    @kahar_diy3955

    2 жыл бұрын

    @@mytech6779 owh..i see..thanks for the great info..but i have another question if i may ask..😅 how long the sulfur additives can lasts in engine oil..? N after that did some of sulfur level 0.03% remain in base oil group II n III can reacts n harm hydrogen n carbon molecule the has form in hydrocracked process?

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Generally no. As it's a pure synthetic base oil - i.e. synthesised from known feedstocks, sulphur levels are vanishingly small. Naphthenic base oils (which are refined from naphthenic crude oil) will contain sulphur levels similar to other Group I, II, and III mineral oils, but that's a different base oil technology entirely, despite similarities in the name and ring structures. As @MyTech points out though, there's likely to be sulphur in the antiwear additives. Both ZDDP and MoDTC contain sulphur, as examples.

  • @tomasnokechtesledger1786
    @tomasnokechtesledger17862 жыл бұрын

    Best base oil? Viscosity Index is too low.

  • @LubricationExplained

    @LubricationExplained

    2 жыл бұрын

    Granted - it's not going to be the main base oil for automotive and mobile equipment. But a lot of industrial equipment spends 99.9% of operating time at a very narrow temperature window - for these applications VI isn't really all that important. Like I said in the video, all base oils have their place - I just used "best" in the title because I'm experimenting with how KZread treats titles in the algorithm.

  • @tomasnokechtesledger1786

    @tomasnokechtesledger1786

    2 жыл бұрын

    @@LubricationExplained Understood.

  • @YeiDCalle
    @YeiDCalle2 жыл бұрын

    RedLine,Ravenol,Extreme Amg ( russian oil and also produced in germany) and amsoil signature series are the tops today . Rest is 💩

  • @pitradomir
    @pitradomir2 ай бұрын

    polyolefins have poor lubrication.

  • @dr.moreau7844
    @dr.moreau7844 Жыл бұрын

    Ravenol 5w30 RSP

Келесі