We Brazilians are very excited for the arrival of this low-cost Mister FPGA. I can guarantee that you will sell a lot here in Brazil. 😊

9 күн бұрын

estou no meio kkkkk

@lucascampos4717

8 күн бұрын

@ isso aí. Kkkkkkkk

@Vulto166

2 күн бұрын

250 million people waiting for this. xD

@DioBrando-qr6ye

2 күн бұрын

Carioca!

Terasic continues to charge the same covid price to maximize profits. A MiSTer FPGA clone at 2017 student prices would be a tremendous gift for the community. Thank you

@blarghblargh

14 күн бұрын

Far be it from me to shill for a tech company, since it's pretty well known a lot of them have no excuse and are charging more because they can. That said, I have some doubts that the price of the DE10nano (in specific) is entirely up to them. Their suppliers are probably dicking them over a bit too. Probably. Few to none of us know for sure. Could also be a bit of column A, a bit of column B. But I completely agree that the low price is pretty compelling.

@DenkyManner

12 күн бұрын

If people are willing to pay, why wouldn't they charge more? This isn't life saving medication, it's a totally unnecessary ultra niche product. You can perfectly emulate all these systems and more, no one _needs_ a mister, no one is being deprived of _anything_

I've wanted a FPGA forever but they're hard to find and expensive. I'll be watching this project pretty closely. Amazing work!

@DrNoBrazil

14 күн бұрын

Used to be 90 USD a few years ago ... You don't have an extra 90 USD as an adult? Maybe you should rethink your life decisions or find a new hobby.

@Mechanicoid

14 күн бұрын

@@DrNoBrazil forever is often exaggerated by most and maybe they didn't come around when it was $90. Next time be less of a jerk.

@dadibom1287

14 күн бұрын

@@DrNoBrazil Just because you have the money, that doesnt mean you think its worth spending. I'm sure there were a lot of things you'd buy if they were cheap. And where that threshold lies is very individual. Bringing the price down is great for everyone

@Foun_D_OnePiece

14 күн бұрын

I came to this video with no clue what this is. ​@@DrNoBrazil

@haysoos123

14 күн бұрын

@@DrNoBrazil "A few years ago." Ok, so all it takes is a time machine to get that deal. Why didn't I think of that?

Already own a MiSTer but I'm glad that a DE-10 Nano alternative is in the works so others can also get one!

Looks very promising so far. Thanks for getting a preview video up so quick!

way to go! This is amazing, and pretty excited for the future with this board!

Looks great and makes the project more accessible again. Well Done

Thank you for doing this. I've been following this project for a while as well, and like you, I've only seen it get more and more expensive. When these come out for retail, I am definitely going to pick them up. You just got a new subscriber.

I am strongly wishing you guys success in this endeavor! This is one of the best news I've heard for retrogaming in quite some time!

Holy smokes. This is amazing! Thank you. I'll 100% be picking up one of these up!

Omg. I've been wanting a Mister for a long time. I can't wait to order. Thanks Taki for making this happen.

Wow, amazing! I can't wait for the final product 😊

I literally bought a DE-10 Nano a week ago. That being said, im glad more people will be able to get into this project soon!

Very interesting! Looking forward to a consolized version

Thank you for the update and the transparency to us, the potential buyers. I really love this, and will pick up a few in the future!

Very excited for this. I have been wanting to build misters for my friends and family but the de-10 is just too costly now. I currently own two full setups but I plan on buying several of these boards and ram modules. Beyond excited for fpga handheld market. Thanks Taki!!

This is amazing news and I'm stoked to watch the progress. It will be great if it works with existing accessories but I totally understand if it just kind of becomes its own thing for affordability and improvements. Keep up the great work! Also, HANDHELD?!?!? YES!

very interested in what youre going to make with this technology. i think with your input and attention to the finer details with emulation and particularly handhelds, the future is looking very good for FPGA gaming 💪❤

Amazing project !! Well done!

Awesome, great work! So looking forward to it.

Great video as always. I've wanted to get into the world of the MISTer, but as was pointed out in the video, the price is a deterrent. I look forward to more updates on this low cost alternative. 👍👍

It's great to see another option to the original DE-10 Nano in the works! Good stuff.

I'm so excited to see this. I've been looking into the MisterFPGA project recently, and like many others the cost was holding me back. The possibility of getting this in a HANDHELD, at a reasonable price, with the performance benefits of FPGA, the dedication of this community, in a no-nonsense (no android or windows) portable? I'm sold. All it has to do is work and I'll buy one of every model you produce Taki. My Retroid Pockets and Anbernics will go in a drawer.

@thanatosor

2 күн бұрын

Portable FPGA seem fun 😂 Perhaps in Pi zero form factor with enough logic cells and low power consumption.

This is absolutely awesome. I've been wanting to grab one since they were first out but could never afford it but I will certainly be looking to grab one when they're available.

Very cool. Lookin forward to these future products. Must buy

This is awesome. I took the plunge into the world of MiSTer a while back and it is pretty fantastic but if it can be made more accessible that is only a good thing. Really looking forward to seeing how this turns out.

Great work here, I’m so glad to here that the MiSTer project will now become way more affordable for others to get into the ecosystem! Thank you!

Man, I was always considering getting a MiSTer together to replace my Wii as my retro console, but the price was a bit much. And then, just days after i finally get a CRT TV after a few years of looking, I see this. Good thing I've waited so long! Super excited to see how this project goes, especially any consolized version of this.

@Great-Documentaries

11 күн бұрын

A Wii is a MUCH better option. That should be obvious.

Super excited about this! Can’t wait to order this as I’ve not been able to get a MiSTer yet. Analogue Pocket with it dock has lessened the pain of not having one.

Subscribed and watching closely! I love collecting retro systems and games, but this will be a nice all in one option when you just wanna jump quickly into something on a modern display!

I'm so excited for the MiSTer value menu! :D (As are many of my friends who want MiSTer but couldn't justify the price)

That is really awesome, hope this project goes very well.

Some kind of case would be awesome as well. Thanks for your work.

This is a great start! I would get this and use my other two DE10s for other uses.

This is really amazing. Thank you so much for doing this. I hope that the ports can be further optimized. SDRAM integration would be a great thing for V2; even it the price was up from $99. But a $15 ram is a godsend!

This is great news ! FPGA is currently very much an elite system considering the price of the mister or analogue products. Very surprised that you are one of the co founder of this, this sound good coming from someone with so much attention for details. Personnaly, I can't wait for the console version !!!

I am so glad you are doing this! Untill now I had no reason to buy an FPGA because of the high price cost, I already have most of the consoles I'd like to and a very nice CRT to go with them. This is gonna be my first FPGA!

Holy crap, I was anticipating there were going to be major compromises to knock the price down that much lower but this seems like the full thing! I feel much less bad for waiting out on the Mister now!

Outstanding! I hope your production facility will be able to keep up with demand, which I am sure will be high.

This is amazing, i will finally be able to recommend Mister to my friends again

Wow! So excited to hear you are a co owner of a company that will sell these (handhelds too) 🎉

Very impressive performance but we’re all waiting for that controller Taki! Looks like something Retroid would design for their RP2 line!

I knew I should've pre-ordered one of those controllers. Looks great, going w/the industrial design.

This is going to sell out fast, it's amazing they got the price to to $100 dollers looks fantasic. a handheld with full mister capabilities would be a game changer.

@vresi

14 күн бұрын

That remains to be seen. Third party sellers, scalpers and scammers are going to make sure this is nowhere near 99 bucks. But... one can hope.

@ridingnerdy6406

14 күн бұрын

I mean, the real DE-10 was $75 when the MISTER project started and I honestly don't believe the price hikes have been entirely due to manufacturing costs.

@Popclone

14 күн бұрын

@@vresi Don't worry,Gyna got this under control to keep the prices down.

@blazini

14 күн бұрын

@@vresi well a replacement for the DE10 Nano that stays at $100 has plenty of value to people with other interests. Gotta think, Terasic didn't design the de10 for video games. I designed PCBs for machine control that used a DE10 before Mister was even started.

@AlexRoseGames

14 күн бұрын

I will buy two more lol

This is incredible news! I've been sitting on the sidelines watching the prices go up for a while, so this will definitely be something to keep my eyes out for!

This is great! I've been an incredibly satisfied MiSTer owner for a few years now but have seen people repeatedly turn to worse options due to price creep and stock issues. With something like this more accessible to the masses, it'll be easier and cheaper to source replacements/backup units, accessory/add-on creators will see more business, FPGA competitors preying on the enthusiast market will get a reality slap, and audiences in general might start pushing for higher emulation and input latency standards from mainstream gaming entities.

@Teapose

14 күн бұрын

On the plus side, it's shown me I can survive with a "lowly" RPi4 build, that does Dreamcast and below relatively competently; I've had lots of experience with MiSTER AND RPi4, and they're both very good, it's just really hard to get over the build cost today. This though... $115 out the door with an active fan and you're ready to roll? Too good to be true

Just having Saga on the background, brings tears to my eyes.

Reducing the entry-level barrier for FPGA gaming wow Taki this would be a game changer. I'm wishing blessings upon blessing for this project to succeed. Taki for President everyone 😁

I already own two original setups, but I'm definitely grabbing a full set of the new board. Thanks for doing this, hopefully it will grow the community a lot now there will be a dedicated board. Wouldn't mind if the new board will be called MiSTer. 💪 Thanks for all the effort.

Thank you so much for taking the initiative! I'm already an owner of a DE 10 nano, but I will definitely buy another one from you guys in order to support you! 🎉💪

@Taki please tell me where you can get that glorious yellow USB cable you are using in this video? Love the plug and the look of the cable overall

I have the mister saved on my wishlist for aliexpress and the price of the kit jumped from 600 to almost 900.. its crazy.. I will definitely try to grab this one..

I am so excited about this. I've wanted to get into the MiSTER project, but it's been way too expensive

Loved work congrat

This looks great, I'll finally be able to get into MiSTer

very excited about this project. I hope you make a portable console, a desktop console and also some dock to connect to CRT televisions.

Doing the Lords work my guy, you are a superhero!

I remember the $125 days of the DE10. I think I got mine around 2018/2019. Also…this is a game changer!

@rkeith7766

14 күн бұрын

Same. Can't believe I've had it for over 5 years.

Looks great and would be nice to go to the lower price point that the Terasic board once was. If you guys make a portable console around it, it would be nice if you are able to incorporate a dock with analog out + SNAC support as that will give it the edge over something like the Analogue Pocket being able to play both handheld/HDMI as well as on CRT with original controllers/lightguns.

CRAZY TAKI !!! ❤

I have been interested in FPGA based computing for years now but honestly just could not justify the price. So this is very interesting. Unlike most, I am not as interested in the game consoles and am hoping to use FPGA to explore many older home computer systems without the cost of purchasing and maintaining actual vintage hardware (beyond what I already have😂). Looking forward to this project being available!

I have been hesitating to tinker with the MiSTer for several years now, but this would make me pull the trigger. I really hope it will be possible to get one shipped to Europe. In any case, amazing development :)

I was curious about the Ram. I'm glad you cloned the version 3.0. If everything works out, this could be really cool.

@jgorres

13 күн бұрын

I'm assuming the N64 "Turbo" core overclocks the RAM, but to what Mhz? I want to know if this clone RAM will do it, and hold up?

I would like to see someone playing with an iCE40 based board for the role too (more open tool chain, pretty cheap chips), but this is definitely the more important project.

This is great! I haven't gotten into these types of products specifically because of the price, maybe now is the time lol.

I'm really interested in the portable console form factor of this, but this is amazing!

Awesome! Now, finally I might be able to get a MiSTer.

Honestly I also can't wait for a hand-held based on the same technology - in the landscape format. I love my Analog Pocket, but the typical handheld layout would be SWEEEET.

At this price and if it's 1:1 to the nano mb in term of performance for mister, it's a big win for the community!

Great work and great news. Also was interested in the mister project and found it always too pricy as a hobby.

The title should read Terasic DE10-Nano compatible...

hey TAKI, please make a version with a better FPGA. 110K Logic Elements was not enough to implement a proper ao486 core for example, they had to remove the floating point unit...It's not fast enough for various DOS games. 110K LE is barely enough to make an accurate Saturn, Sergiy had to gimp a bunch of parts of the implementation in his Saturn core. I've been waiting forever for the community to finally move past the 110K LE. Come on TAKI, you can be the one who leads us to the promised land and moves us out of the 110K LE era. It's been 8 years of 110K. Something's gotta give, we can't go like this forever. What if you could make "BASIC" version for $99 that's compatible with old cores, and a "SUPER" version for $199 that opens up the possibility for some new cores?

Looks great! What is this wonderful yellow usb c cable?

Looking forward to see this on online stores.

That is crazy awesome

This sounds amazing. I can't wait to make more affordable #MiSTerFPGA builds for people again!

I’ve wanted a mister for years but like you said I too held off so long that the price became too high to afford. So needless to say I’m very very interested in this board!

Awesome! Where can we read more info about this? Who develops this PCB?

Hopefully the handheld will have the same capacity, for compatibility, as a regular Mister FPGA. Also, A horizontal handheld would be nice to have a more ergonomic grip on it and also more inputs for greater compatibility with laster gen console cores and some arcade cores (spinner, trackball, etc.) :D

Fantastic!

Despite owning an Analogue Pocket, I was never interested in getting a MiSTer tbh but damn, now I want this one!

Amazing!

very good, spread the love

Did you say handhelds in the end? Because that is what I'm looking for. I have been a MiSTer supporter for a few years and I love this system. I was lucky to get it when it was still affortable. I would love to have a portable handheld MiSTer. Analogue made a great little device but can only run so much that i'm missing so I always go back to the MiSTer. I hope this will succeed Taki

Thank you Taki for your hard work 😊

Hey! Very excited! 👍And what’s the screen do you use?

@TakiUdon2

14 күн бұрын

Peakdo wireless - I linked it

After DE-10 Nano and SDRAM, the SD card is the next big expense. Could it be cost-effective to integrate a large amount of flash storage instead? Like, I have 2x 2TB SD cards with one in my I/O board but could 4TB or more of less dense onboard flash be cheaper?

Will definitely be keeping my eye on this as a more affordable route thank you. Your discussion of consoles being a future option, is this eyeing up the Analogue market by any chance? I can't imagine what their N64 clone is going to cost for example, so alternatives that are just as capable but more reasonably priced would be 100% appreciated with updated USB-C and HDMI features.

I want. ty for reporting on this, never even knew it was being worked on.

i'd build a second one with prices like this. looking forward to it!

2019 I bought the official board from Amazon for $130.00 . This is pretty exciting to see $99!

This is so cool

This is so cool. I've wanted a MsterFPGA, and I could have easily afforded it, but the prohibitive cost was always a turn off. After all, I already spent $200+ on an Odin (and even more on an Odin 2 later), so why should I drop the same on a system that does even less?! This though? I'll probably purchase day 1 of availability.

nice would love to see this widely available on ali.

Yes 🙌 🎉❤

If you're going to be making a FPGA Mister Handheld in the future please give it the biggest 1:1 or 4:3 screen you can get your hands on. Seriously the bigger the better.

This looks like it will be a game changer. Thanks

How can we support this project? Gaming is just a cherry on the top of the laundry list of uses I can find for a hardware like this at this price point. for some context: As a CS/EE guy who also loves retro games this is way more than just an amazing value for money (for all EEs that had the misfortune of having to purchase an FPGA for their ASIC projects), but also FPGAs are the most authentic experience you can have at trying out retro games with the exception of the actual console it came out for and a time machine to go back to when the chip was manufactured. (chips degrade over time due to a wide range of reasons. Anything from power fluctuations, being exposed to radiation or even absorbing humidity. Specially on time scale of decades.)

This is going to change everything (not being hyperbolic)

Can you fix the SNAC problems (no ”in Menu navigation, no 2-Player on some cores, no DB15 support et.c)? Also, when do you expect this to be for sale?