Shout out to the apprentice. That shit made me smile

Hey mate. Will from Evolution here, I'm happy we can be involved in helping you out to get back on your feet and back to work, as I mentioned on the call it is something we are working on to hopefully do more often in the future in this situation where trades people have had their tools stolen and we can support them in getting back to work. Hope the saws are helping you, I've messaged you on Instagram and can help with a few more set up tips and such so you can get the most out of them. All the best, keep up the content.

It’s not a lot, but hope it helps towards getting some tools back. Not sure if you saw my Insta message but I’d be happy to fit some van security locks for you for free to help prevent this happening again mate. Let me know 👍🏼

I’m really surprised Dewalt didn’t help out after you had all their gear and raved on about how good it was.👍

@roccostiff2444

5 ай бұрын

Great point 👍

@BiscuitMnster

5 ай бұрын

i did wonder that, but i am a DeWalt fanboy and have used there gear for years, don't do YT or any of that and when i accidently bought a drill from a well know secondhand shop in my local town i went to register the serials and even DeWalt did not know it was stolen....we need a better system to make secondhand tool sales non economical

@roccostiff2444

5 ай бұрын

@@BiscuitMnster unfortunately mate the only way to get second hand tools is from the dodgy markets or cash converts where thieving fuckers like this young man’s just had take the tools, his tools prob already in the back of another carpenters van 🤷‍♂️

@paulcollin1398

5 ай бұрын

Dewalt wouldn't give tradesmen anything even though we keep buying it. I've been a carpenter for 5 generations haven't had any thing yet

❤..🙏

You are a great role model mate and the proof of it is your apprentice buying you those tools. More power to the both of you.

@ttdowgcarpentry2390

5 ай бұрын

Thankyou I appreciate the kind words

Thanks for the content bro! Always look for your vids and enjoy them bro 👊🏽👊🏽👊🏽

Onwards and upwards mate….. big shout out to evolution for stepping up when times are hard. The apprentice is a star for his kindness. He clearly appreciates everything you have done for him 👍🏻

Worst thing ever for a tradesman to have there tools stolen it's our livelihood and these scumbags just take it from us not realising the stress and problems it brings us. I've followed you for a good while now, and it's good to see how far you have come 😊 keep your chin up mate and carry on doing what your doing.

Keep up the good work young man. You're an inspiration and a great teacher.

Glad we could help Taymar; there are way more good ppl out there then bad. Keep the faith brother. 🙏

Evolution tools are great, super prices and quality, I’ve got the near full set and used them big and small projects and never failed me. Good on them for helping out, deffo a brand to look out for in the tool world, good luck mate.

Keep your chin up TJ. You can see how much support you have. Stay strong my friend 💪🏻

Chin up brother....life throws us a curve ball....start one step at a time to get back to where you want to be. Stay positive 👍

I think what we all really like about you , is that you are humble.. You have looked after your apprentice and now it’s his time to look after you. Please keep on making all these videos. All the best mate👍🏻

Well done “The Apprentice” & evolution tools top lads 👍

Well done and good luck to you and your apprentice. Don't give up - just keep going and go on to the next level. 👍

You deserve all the support bro. You are a credit to yourself and your industry.

Love it when a plan comes together

Hello, I am so sad to learn what happen to your van and your tools... Glad to know that you are still going forward ! Thank you for your videos. Your are so inspirational and the work you are doing is awesome. I am not a carpenter (I'm a web developper) but since I watch your videos, I project to change my job and do wood working. So.. "yeah" thank you so much

I hope this helps out brother! Keep your head up

Big up the apprentice buying you a router combi and an impact, what a lad

Keep your head up bro! You’re good ppl and we got your back💪🏻

You are top Bloke man and your apprentices is a top lad, keep up the good work which there will be plenty off!

Really enjoy your videos mate. Appreciate your professionalism and you come across as a really decent guy. Your parents must be very proud of you. If I was living in the UK I’d use your services . Keep up the awesome videos mate . Well done .

My collage show your videos to our class

@ttdowgcarpentry2390

5 ай бұрын

Love this

@tardistime6857

5 ай бұрын

@@ttdowgcarpentry2390 we all love them and we learn from them and take little notes from them we all like the apprentice by the way

Alot have said it and ill reiterate it, shows how good a mentor u have been to him u both should be proud

Keep going, you're a good man, it will all work out in the end

We appreciate you too bro, keep up the good work! Thanks for sharing your knowledge!

Really glad your getting back on your feet mate !

Your videos are inspiring keep doing what your doing man.

found your channel 10 minutes ago. From the media wall build. Keep your chin up pal. Onwards and upwards

Thanks

It says a lot about you as a person for your apprentice to do such a kind hearted thing like that for you you treated him right all this time and he stepped up for you when you needed it much respect to you both and keep up the good work your vids are really good and I love how patient you are explaining to the apprentice mines also 17 and just as keen there the future of our trade and it's good to see somone else as enthusiastic about passing on there knowledge to somone willing to learn good job lads 😁

Hey mate you seem like such a great guy. I wish you all the success in the future. Keep going and push through the negative because itll be worth it in the long run. 💪👍

You’ll be back at it in no time!! Keep moving forward fam 👊🏾

Only too happy to help. I have had a good living doing exactly what you are doing and I have had the van cleared out by tick-turds the same. I am retired now but you can have a good future if you keep going! 👍👍

Good luck hope you get on your feet soon and start making money

Amazing attitude brilliant work ethic you'll be sound bud 👍

Hi, I've just started watching your videos and I think they have been a real inspiration. Just want to know if is it ever too late to get into carpentry and what the best way to get into carpentry is? Thank you and keep up the videos and the amazing work you're doing.

Your apprentice is a good lad

Keep doing good things helping people in your life. Make a video of the new tools👍👍

Keep up the good work buddy.

Look at it this way... your community likes you that much... we don't want to see another hard worker loose the drive just because the world gives them a kick. keep being real and doing the good you can do and things will always work out.

We stick together that’s what we do

Great Chanel and content, head up mate 💪🏼

Best get some slam locks on van and maybe a clifford alarm. Thanks for the uploads. Keep doing what your doing bro

looking forward to new videos!

Thanks!

@ttdowgcarpentry2390

5 ай бұрын

I appreciate you thankyou 💙

Keep going mate

Top man

More power to you bro, your craftsmanship is top tier!

@ttdowgcarpentry2390

5 ай бұрын

Thanks mate really appreciate you and the kind comments

I just almost finished getting my tools covered by the insurance was hard had to fight but I'm back .The insurance has done right by me but I made me take a hard look and realized how underpaid I was as a cabinet maker what trades has to show up with half a million worth of infrastructure to work . Good luck

OK, mate- I'm an old school joiner with 35 years experience under my belt. I love your site and it's so good to see our trade is in safe hands in the future. Having gear stolen is just part of life, I'm afraid. It's how you deal with the challenge that's important Nice one mate

Chippy on my job got cleaned out last Friday,literally just popped the lock,there has to be a way to make a van door unbreakable

Iam so sad to hear what happened what scumbags of course u must have felt down hopefully now u can get back to work thank goodness theres sone good people arond good luck 👍

Your going to put the apprentice wages up lol 👍

good video mate your apprentice is a kind lad but it means you carnt sack him now 😀

Please don’t keep your tools in your van anymore, keep hustling TDOG 👊🏽🙏🏽

You deserve it mate.wouldn’t have hurt dewalt to at least send you one item with the amount you had spent on their tools whilst posting and advertising their brand.

hii i hope u get your tools back

Well done to evolution, surprising that dewalt wouldn't help even though your apprentice asked poor show on their behalf.

Dont wanna sound harsh i like ur vids but if u cant afford to buy some tool replacements with all the donations u got given and the work u do maybe you should focus on bringing the money in and not youtube. As your making it seem like your really struggling here. I do like your vids just saying.

I have all DeWalt in my van aswell if it was robbed doubt DeWalt wud reach out to me either, I'm not on KZread so ya suck it up tradesmens tools are stolen all the time, pitty that the people that steal our tools for a livelihood we pay there benefits to stay on the dole

Can we all contact dewalt or you contact dewalt and see what they can do.. you would be suprised how much they would help out.

Thanks