Testing out the New Dremel Wood carving bits making a succulent plant holder.
Тәжірибелік нұсқаулар және стиль
Carving A succulent wood holder using the new dremel bits.
Kutzall
carving burs I use link,
👇
Use code: CFUSION to save 5% on burs and diskskutzall.com/?aff=24
All the carving tools i use are in this amazon shop listed below👇
As an Amazon Associate I earn from qualifying purchases.
www.amazon.com/shop/carvingfu...
If u wanted to buy me a coffee here is a link to my pal pal👇
www.paypal.me/carvingfusion
Shirts and gear
jordy-johnson-shop.fourthwall...
STARBOND GLUE 👇🏻
Use code : Cfusion to save 10%
www.starbond.com/?rfsn=475825...
etsy.me/2Usrss6
/ carving_fusion
#woodcarvingbeginner
#carving #woodcarving #carvingfusion #Jordyjohnsonwoodcarver
#Jordyjohnson
#howtowoodcarve
#Howtowoodcarve?
#Beginnerwood
#dremel
#Woodcarvingideas
Пікірлер: 72
Your backyard is awesome, Jordy! Love how peaceful and serene it is, with all of the cool carvings and the sound of flowing water, nice!
@CarvingFusion
Ай бұрын
Thanks so much!
“This knot here could be an eye and a mouth over here. This could be a charging bull or a fire breathing dragon. But it’s just a flower pot.” Lol That took an abrupt turn for the mundane! 😂 Thanks again Jordy! Those planters at your place look amazing.
@CarvingFusion
Ай бұрын
Lol :) ty too
OMG Your backyard is soooo Cozy looking, Peaceful and just surrounded by Nature! You have created a little piece of Heaven right there with all God's creations, Free for the taking! I would much rather walk in nature and collect free things than go to a store or mall and buy things.....Wow such Beauty Jordy, You are gifted with Talent!!!!!
@CarvingFusion
Ай бұрын
Awww thank u
Where have you been. I bought a dremei kit case and all but never used it. I got interest in model trains. So I subscribed and will be here every time
@CarvingFusion
Ай бұрын
Thank you
War tape = 💪🏼🤘🏼😜 Great test Jordy I know Kutzal burrs eat wood like an angry beaver 🦫 n they last the test of time. Awesome little creation though brother 🖤🤟🏼 You’ve saved me so much money over the years keep up the honest reviews bro 💪🏼
@CarvingFusion
Ай бұрын
Thanks spike
No way!!! It’s about time Dremel!!! Thank you much much appreciated, can’t wait to see how it works long term, keep up the good work Jordy, you should be sponsored by now and some js
It looked to do the job OK but your the expert I hope you were wearing a mask as not all fibres get suck up through your filters You did a great job on that piece I've been collecting bits of timber like that 😊
Awesome review Bro, they’re a little late to the game!? You would have thought they’d come out with a whole line of them, tapered spheres ect. You can’t even buy a dremal at Home Depot anymore. Everything is Ryobi! Ryobi makes flame burs they make all of them fine and corse. Your yard is heaven! Good stuff!
just had my second sell out of all my chainsaw carvings today for the second time . only took two days both times ,all thanks to you and your videos Jordy . would have never even got started with out you buddy, much thanks to you Jordy, keep up the great work and keep being you again many thanks to you
@CarvingFusion
Ай бұрын
Awsome to hear and congrats, thank you
nice little review! an Awesome little planter! yea i dont like that deep cut mark that dremel bur was leaving im with you i like the off set pattern on the kutzall burs! thank you for the video!! Stay safe!!
Thanks for the demo . I just left woodcraft and was looking at Dremel bits bit bought Kutzall instead. I've been watching you and Ed Esposito for lessons and am starting to get into my Delaware River driftwood supply . Thanks
It seems to work alright but I think I'll stick with Kutzall . Thanks Jordy .
@CarvingFusion
Ай бұрын
Me to glen
😳😳😳 Well, I'm surprised to see it didn't try to jump out and run across the room when you dug into it... nice, but then again it is new and not chattering yet. True, it does leave a groove, so do many of my other Dreamer bits, but it looks pretty good for the price, especially for roughing out and less intricate finish work where you're going to do some cleanup anyway. Lately it seems like the newer upgraded bits from Dremel do a much better job than the original cheap steel ones I have loads of (and that I have wasted many hours with). Excellent video Jordy, thank you! 👍
Thanks for the review!😎
Thank you Jordy!
Interesting very interesting thanks for the info bro
Looks great👍🌟
Good review 👍Thanks again 😃
Fantastic, well done🇬🇧🥇💯
Looks like the sabertooth for sure thanks for the review 😊
Oh this looks awesome - I have been experimenting with carving soapstone (with dremel bits). I might try wood eventually. Your content is very useful! I'd love to make a planter, beautiful!
@CarvingFusion
Ай бұрын
Aww thank u, I have carved lots of soap stone as well if u look threw my playlists
@estycki
Ай бұрын
@@CarvingFusion yup that's how I found your channel originally! But I like watching you work all materials and explore different tools
great job Jordy
I finally got mine in, I am gonna try it out tomorrow I think. Depending on how hot it is in the shop.
Nice job.
Not bad Mr. Jordy 🎉
Have you ever did a video of selling your carvings, like how/where/when you sell and your pricing ? Thanks.
@CarvingFusion
Ай бұрын
Yes I have
Great review, Seemed to cut really well,but the bigger question is for how long? Kutzall has already answered that through many,many carvings i have done myself using the flame burr. So Kutzall Be all I use ya,ll Later all. ✌️🎨🎨🎨😁 LMAO 🤣🤣🤣
Looks good to me.
Really nice jordy 👌
@CarvingFusion
Ай бұрын
Hi midnight shadow
Thank ya, Jordy! Hey that's an awesome fountain (yeah it's not the first time it's been in a video just the first time I'm sayin it). :)
@CarvingFusion
Ай бұрын
Thank you
I know, I say it like that, but instead of reproducing already existing products that have proven themselves (and less $), why not innovate instead? Honestly, I prefer Kutzall!
Have you grown all those succulents that you had in the clear container? That’s amazing. Thanks for the review of the bit😎
@CarvingFusion
Ай бұрын
No those are just extra ones I got when I bought some and ty
The cutzall burrs are tungsten carbide teeth, much harder and longer lasting than hardened steel or stainless steel! Besides, I'd much rather buy American made prouducts! Thanks for the review!
@CarvingFusion
Ай бұрын
Me as well and thank you
Good video. I've only used the dremel tool a few times so I'm guessing the tape is to prevent blisters on your fingers??
@CarvingFusion
Ай бұрын
U got it
Wondering when you were coming back
Thanks for the review. Why do you tape your fingers?
@CarvingFusion
Ай бұрын
So the flex shaft handpiece don't dent my fingers
I'm a newbie, Why is the tape specifically in those spots?
@CarvingFusion
Ай бұрын
Do the handpiece do t dent my fingers
What speed do you run your dremel with the carving bit?
@CarvingFusion
10 күн бұрын
Max speed just harder and lighter to the touch
How much they cost in comparison would be a biggie for me !
@SoeCarpeDiem
Ай бұрын
28$ CAD
I guess Dremel is tired of loosing business to other burr makers. I'd rather buy "made in America" anyway. Good test though. Hi Jordy.
@CarvingFusion
Ай бұрын
Me as well rick
Kutzall seem to be better is there much of a price difference you didn’t say
@CarvingFusion
Ай бұрын
Not much
Does the kutzall bit smoke like that?
@CarvingFusion
Ай бұрын
Yes it can it just shows the wood is damp
@richardmccann4815
Ай бұрын
I'm pretty sure the cutzall burrs are tungsten carbide teeth. Tungsten steel is not as good.
@RuneCarverLLC
Ай бұрын
@@CarvingFusion ... or on fire! 🔥 🔥 🔥 Sorry Jordy... I just had to say that! 🙄🤣😊
Are you going to do Halloween stuff again this year?
@CarvingFusion
Ай бұрын
Always
⭐️🇨🇦⭐️🇨🇦⭐️🇨🇦⭐️🇨🇦⭐️
If it's any help, it's pronounced " tung-stun "
@CarvingFusion
Ай бұрын
Thank u lol