I love the way it slowly takes shape and turns into a beautiful piece of work Love the commentary throughout the whole tutorial Thanks again Patricia

@CarvingFusion

Ай бұрын

:) thank yoy

I appreciate you explaining everything involved. Some people are too arrogant and don't take time to deal with beginners.

@CarvingFusion

11 ай бұрын

Thank you

I have just learned some really good tips from this video, i love your teaching. Been watching for a few yrs but just took the hobbie back up 😊

Don't you hate it when you want to show something and it won't do it .breath deep mate .don't doubt your ability Jordy you have heaps cheers mick

Thanks Jordy shows us that you can fix any mistake ....well almost any , k, Carry on.

je trouve qu'il est bien réussi , d'ailleurs je suis toujours étonné par le résultat car tu avance très vite et cela semble un peu hasardeux.Mais non tes gestes sont précis et finalement tu as toujours un visage réussi.Tu as ton style Jordy ! E merci pour tes commentaires ils sont précieux à écouter !

@CarvingFusion

5 ай бұрын

Thank you

And you didn’t disappoint! Good stuff Jordy

Hi Jordy. Dude you are mentioned in Woodcarving Illustrated. Congratulations Man

@CarvingFusion

Жыл бұрын

Awesome ya so I heard and Thank you

Right, first attempt at a wood spirit, and I’m some what pleased with it so far, still got eyes, details to nose and hair etc to finish, Kutzall Burr jumped off the wood and across the back of my middle finger, just took a little skiin off, but you have to learn, it won’t happen again, lmao.

@CarvingFusion

Жыл бұрын

Lol awesomeness and yup little skin removal no big deal ehhh carry on

Great tips Jordy stay safe bud .

Hello Jordy! Thank you for the video! It just appeared on time, because today I carved a person's face out of wood, and the result was not quite what I would like to see. And I didn’t want to finish it, but just throw this blank away, but after listening to you, I decided to finish it!)) Your optimism is transmitted to other people! I posted one of your videos (where you make a ghost with a chainsaw) on my page on the VK social network, and gave a link to your KZread channel! 👋

Awesome, Jordy😊

WoW 😳 !!! Thanks for returning my text !!! That’s So Cool !!! You took time out of your very busy Life to offer me encouragement , that Really Means a lot to me !!! Thanks “JJ” !!! 🙏

@CarvingFusion

Жыл бұрын

:)

@gypsywolf58

Жыл бұрын

Please help generous Jordy get a new, much needed new tool by donating whatever you can afford, in return be included in a drawing giveaway from him of a beautiful piece of his art!

Hey Jordy, I love your artistic approaching and view... I do carving as well (for enjoyment ... and for many friends) and I tried all kind of tools and I can recommend you to try Mastercarver (from Amazon or carve shop) with micro motor. An advantage is you can regulate speed and direction of rotation what eliminate problem cutting opposite to grains ( in my case using diamond burs it is matter of smooth cuts - for example for gun stock carving) . I like carve to maple, bubinga, walnut .... it is very hard working with oiling wood like ebony , purple heart, bubinga, ... but no impossible . Keep doing your great educational videos !

@CarvingFusion

Жыл бұрын

Thank you I already have the micro carver

@lubub9088

Жыл бұрын

@@CarvingFusion Great ! I also use ultra high speed carver (400K RPM) but for finishing I prefer micro chisels - more fun for me - but take more time :-))

@PetrikNZ

Жыл бұрын

@@CarvingFusion I just ordered something similar as I discovered with carving that with all the Dremels etc. I don't have the option to reverse the rotation which I need for the way I wish to carve being a lefty.

@CarvingFusion

Жыл бұрын

@@PetrikNZ I'm a lefty to

@tedtaylor7015

9 ай бұрын

I learned a lot from you Gordy Gordy keep on talking Gordy

I like this spirit alot it's got a real old look & feel to it. ..Ummm..did I just describe myself there?🤔🤣😂 I agree 100% that flame burr likes to be run full blast especially on the drag,float and feather when needed with lighter touch. That crazy little football burr chews wood like a pissed off beaver 🤣😂🤣😂✌🎨🎨🎨😁

@fromtreestothese7369

Жыл бұрын

Oh yeah ment to say really great advice on how to use the flame burr.damn Jane made me forget for a minute %) lol.

Good day to you Jordy, better to be hot coffee on the floor then in your lap. I have wood from a dead fig tree that carves easy and keeps detail. Have a blessed day.

Glad you clarified that bit jordy on the speed of your dremel ,, as I thought you had a speed operated foot pedal , instead it's just an on off switch 🙌👏👍

Thanks for the video Jordy

Sorry Jordy that's tough.Losing my coffee I would not be happy. Keep up the Great videos. Jim's wood shop.

I already know I’m gonna love it!

looks good!!! polyshade.... Stay Safe!!

Just bought a Kutzall Rough Burr, waiting for it to arrive, I’m going to give this a go, you have inspired me, Jordy.

@CarvingFusion

Жыл бұрын

Awsome u can do it

Siempre veo tus videos y siempre te quedan super bien, lo intento siempre viendo algunos de tus videos para principiantes y por mas que lo intento no logro que me quede bien y no entiendo en que fallo si segun yo sigo tus movimientos y ni asi, no he logrado hacer ni un solo spirit wood y creeme lo he intentado y lo sigo intentando y no logro algo bonito. Sigue subiendo tus videos porque lo haces muy bien, seguire viendote y lo seguire intentanto, en algun momento tiene que salirme. Saludos!

@CarvingFusion

Жыл бұрын

Carve more u will get better

Hi Jordy might not be one of your best ones but Im sure you were having fun I think it was good carve deeper Bro

Hi Jordy carve deep stay safe just carve

looks great Jordy - one of these days I might try to do one like this

From watching your videos and carving my first 3 pieces, I definitely need to carve deeper and deeper as you showed here again and on your other videos. As for the coffee spill, (which totally sucks) perhaps you need a coffee thermos (with the Carving Fusion logo on it!) - I bring mine out to the shop; keeps the coffee hot and there's less shavings in it! I love the Kutzall Extreme Burrs - have 3 and my new 1/4" sphere arrives today - thank you for always explaining what burrs you're using - so helpful!

@CarvingFusion

Жыл бұрын

Thanks you too june

Love from india jordy.. your videos made me start carving.. keep carving.. carry on!!! 🔥🔥

@CarvingFusion

Жыл бұрын

:) have fun

Howdy 👋🤠 Hey There Jordy !!! 2:23

Thanks for the tips Jordy, I struggle with faces but yet I can carve animals... I must have a loose wire somewhere lol

I have a tendency to go hard , I need to pull back since I'm a total beginner. Gonna try out the new bits tomorrow.

OK. Hi Jordy.

@CarvingFusion

Жыл бұрын

Hi rick

Yeah that's exactly how I broke my flex shaft

I’m going to a Craft Show next Saturday , February 4th , Wish Me Luck !? I Owe You a Debt of Gratitude !!! Thanks 🙏 Buddy !!! Later Dude !!! 👋

@CarvingFusion

Жыл бұрын

Good luck at the sale tmrw

I lost sound for a bit. Not sure if it were on my end. Yes I comment as I watch otherwise I will forget what I wanna say. Hahahaha 😆 😂

@CarvingFusion

Жыл бұрын

Lol

Now then jordy! Beauty video! How do you scorch the woods light to give detail? I struggle with that bit haha

@CarvingFusion

Жыл бұрын

Lol ty just don't burn so much

@rbrratboyroaming4654

Жыл бұрын

@@CarvingFusion what burr do you use to scorch it abit tho jordy?

@CarvingFusion

Жыл бұрын

@@rbrratboyroaming4654 ohh sorry it's the dremel #125 bit, they come in packs of 2

@rbrratboyroaming4654

Жыл бұрын

@@CarvingFusion it’s fine buddy. Thank you and keep up the good work 👌🏻 best on KZread by a country mile.

Iam bran new on carving, what bits do you recommend me to start?

@softysmith

Жыл бұрын

Hi there, you can buy Kutzall ones as jordy suggested or you can buy aluminium burs shown in the video.

@evilevilrick

Жыл бұрын

All the carving tools Jordy uses are in this amazon shop www.amazon.com/shop/carvingfusionbyjordyjohnson?ref=inf_own_carvingfusionbyjordyjohnson_cp Kutzall carving burs I use link, Use code: CFUSION to save 5% on burs and disks kutzall.com/?aff=24

You are

🪵🔥🔥🔥❤️

Gordie for f****** sakes you my dog

@tedtaylor7015

9 ай бұрын

I think that came out pretty damn cool man how far is good all or is good art

@CarvingFusion

9 ай бұрын

Lol ty

De uitleg duurt te lang 🙄

@CarvingFusion

Жыл бұрын

Ok by

Nopee I don't care lol