Tectico/DZG Side Light Installation on Bronco Sport
In this video, I will (attempt) to show how to install the DZG/Tectico Side Light indicator on my 2021 Bronco Sport Outerbanks. Any questions I will attempt to answer if I can. Thank you
In this video, I will (attempt) to show how to install the DZG/Tectico Side Light indicator on my 2021 Bronco Sport Outerbanks. Any questions I will attempt to answer if I can. Thank you
Пікірлер: 48
Needle nose pliers really saved the day here popping these clips. Watched your video, and was done in about 30 min in the rain. Had to keep going back and making sure I had the right wires before clamping the splicers. But overall super easy to do with this video. Thanks for posting. Wife loves her side markers.
Just installed my set using your video. Working great. Thanks so much.
I used my wife’s jewelers 90 degree needle nose pliers to pinch the clips. Worked like a charm. You can get them at a Michael’s or Hobby Lobby for cheap.
Thanks for the info, I couldn't get any info on wire connection for the running lights but this solves it.
@mcdudevids
Жыл бұрын
Glad this helped
Thanks for making easy to install, the wiring colors did yhe trick for me.
@mcdudevids
Жыл бұрын
Glad I can help and happy the video made sense
Thank you! Really appreciate this.
@mcdudevids
Жыл бұрын
Happy this helps
Nice job
Omg thank you
Thanks
You should grab some split loom to clean it up
Do you have to strip the wires before you use the quick splice or can you just attach it as they are?
Are these using the DRL or just the headlights when on??
Love the idea, (probably should be this way from the factory). !Looking at you Ford! Wishing their were other options, the factory parts on the outer banks and my badlands are color coded, and these are too basic looking, and would look out of place.
@mcdudevids
Жыл бұрын
Yeah totally understand. Neat little idea for the cars though. I love how they look, even though its a small detail
I found this very helpful. Thanks so much. 🙂 Did have one issue: the passenger white light is working but the driver white is not. All the blinkers work, as do all the rest of my lights. The red-brown/blue connection looks good. Do you know what might be causing the problem with the driver white light?
@mcdudevids
Жыл бұрын
My best guess would be the wire connection is not correct, the splitter did not form a good connection between the wires, or there is a defect in the running light wire from the product. Could possibly from the grounding wire, I'm not sure
@jonathanoakley88
Жыл бұрын
those splicers are not reliable. Hardwire it.
@Donnie4599
Жыл бұрын
@@jonathanoakley88 I thought it was red to brown, not red to brown/blue. Thanks for clearing that up, should make a difference....lol
I ate a handful of spinach everytime you said "basically".. now I'm Mr Universe. Lol
@mcdudevids
6 ай бұрын
Basically ;)
How do you get the plug and play connectors that come on the amber only version onto the side marker lights only? Don't want them as blinkers.
@chrisbowe4238
4 ай бұрын
Don't quote me, hopefully you've already figured it out, but I would assume they connect to the daytime running light wire. That would feed a constant current to the side marker.
Trying to follow your instructions but instead of the yellow wire that you have I was given a black wire (-) installation guide says “connect tot he iron part of the car. I’ve got Red(+) connecting to the turn signal light.
@mcdudevids
Жыл бұрын
Hm very odd. Normally black is a ground wire. I hope they did not change the wire colors in the package. It could also be the brand of the side marker maker. The black wire is almost always a ground connector. I had that connected to the ground wire on the headlight (black-purple stripe connected to black-green stripe wire). Red should be the daylight running lights wire. Yellow should be the turning signal wire. I have a segment at 4:35 for the driver side and then 5:48 for the passenger side. Apologies if my explanations are not great
@petertrznadel8107
8 ай бұрын
@@mcdudevidsthere’s another version that does only yellow turn light, so only two wires red and black, red for the turn light and black for ground.
I guess I’m having issues with the slicing. Should I use a specific type?
@chrisbowe4238
4 ай бұрын
First time I've used what he's using and worked fine. Dorman 22-18 Guage quick splice. Put one wire in one groove, the other in the other groove, use pliers and clamp down the metal splicer. Fold plastic over and secure.
How remove plastic factory trim ? Is really hard tried but worried about brake or scratches
@mcdudevids
Жыл бұрын
There are a couple clips on each trim piece. You have to press both sides of the clip to undo it from the metal connector. If you order the DZG side lights its the exact same layout of clips. You can get an idea of how it looks and works using that, although the DZG/Techico clips are a little harder to manipulate. You shouldnt be able to break the trim or the metal on the car. I put quite a bit of force into removing it, but be careful about not scratching paint. I recommend plastic tools as they are less likely to scratch paint compared to metal tools. The removal is not hard, but it does take time and patience
So, can you tell me what purpose that black plastic piece serves on the side of the Bronco??? If it's not already a side signal light, then what is it there for????? Anybody know? Thanks!
@ThePeterPan76
Жыл бұрын
My husband said it’s a “step down”
@barrykelly2722
Жыл бұрын
'What is decorative trim?'
@jdmoney1000
Жыл бұрын
@@barrykelly2722 hellifino
How did u figure out which wires to connect?
@Donnie4599
Жыл бұрын
the passenger side works fine but no running light (white) on the driver's side. Dim or a faint flicker at best. Would that be the red to brown connection?
Help please. My kit came with no instructions at all and I see a lot of people seem to have gotten the same kit I have which only has two wires. A black and a red wire. Does anyone know how to connect these two wires to the front light wires? Which does the red wire connect to and which does the black connect to?
@TotallyAHumanNotADog
Жыл бұрын
Pretend your red wire is his yellow wire and connect it the same ones he mentioned. Ignore his red wire and those connections. I also bought the same kit as you and this worked.
@randysantiago5454
Жыл бұрын
Yes, thanks that seemed to work and I did change the connectors from the blue ones to the red ones and all was good.
Will doing this void my ford warranty ?
@barrykelly2722
Жыл бұрын
I asked a ford sales representative and was told it wouldn't void warranty. However it would be good to check with dealership first
@Sktzo
5 ай бұрын
No. The Magnusson-Moss act makes it so that if a manufacturer wants to void the warranty, they have to prove the modification was the cause of the failure. Even then, it's for that part only and not the entire warranty.
what is pry force…😂
@mcdudevids
6 ай бұрын
I wish I could even tell you. I have no idea 😂
How did u figure out which wires to connect?
@mcdudevids
Жыл бұрын
There were a couple guides online that were not great at explaining which wires go to which. But I used those online guides, the little paper given in the package, and some prior knowledge along with a buddy to figure out what goes to what. So this was for sure not my discovery alone, I was just trying to make it easier to understand.