Teardrop Entry into Holding

** Visit www.klaviation.com for even more great content! **
Behind the direct entry, the teardrop is probably the easiest holding entry to learn. Even though it is one of the easiest holding entries, there is still a lot to know about teardrop entries.
The basic teardrop entry has three phases:
Track to the holding fix in the teardrop entry region
Cross the holding fix and fly outbound at a 30 degree angle
Make a standard rate turn to intercept the holding course inbound
Tracking to the holding fix in the teardrop entry region certainly doesn't sound like a hard part of the entry, but it is essential. Before you can fly a teardrop entry, you need to know that you are in the teardrop entry region.
It is also very important to fly directly to the holding fix. Although you might be able to enter the hold if you don't cross over the holding fix, it will certainly make the entry much harder.
When you do cross the holding fix, you will turn to a 30 degree angle from the outbound leg heading. If the hold is a right turn hold, you will subtract 30 degrees from the outbound heading. For example an outbound heading of 180 will result in an initial entry heading of 150 for a teardrop entry.
If the hold is a left turn hold, add 30 degrees to the outbound heading. Again if the outbound heading is 180, the initial entry heading would be 210.
These headings are based on a no-wind situation. You must always correct for wind when flying a holding entry. I would suggest no more than 10-15 degrees of wind correction unless you are certain the winds are strong enough to call for more correction.
Next, we are going to fly this initial heading for about 1 minute. Again, this may need to be adjusted depending on wind. If you have a strong headwind or tailwind, change the time as appropriate.
Once you have reached your outbound time, start a standard-rate turn to intercept the holding course. Don't be afraid if you don't roll out right on course. Wind is very difficult to initially correct for in a holding pattern, and it is okay to take a few turns in holding to figure out your wind effects.
If you are holding at a GPS waypoint or another fix with a distance for your outbound leg instead of a time, you have 2 options to make the teardrop entry.
Follow your GPS guidance (if it gives you an initial heading)
Fly a 30 degree initial heading for 2 miles, then parallel the outbound heading
These two methods are the easiest to make sure that you do not fly too far outside of the distance track.
Next, read about parallel and direct entries.

Пікірлер: 21

  • @jjoe7078
    @jjoe707821 күн бұрын

    Bro my brain was shutting down on this damn Cessna online course. I can’t understand anything on those crappy bloated PowerPoint presentations. You have no idea how much these videos help us out.

  • @pauljaworski4186
    @pauljaworski41866 жыл бұрын

    LARS - Left turns, Add 30 degrees to the outbound leg heading; Right turns, Subtract 30 degrees from the outbound leg heading. Left Add, Right Subtract

  • @richardnakatani9206

    @richardnakatani9206

    3 жыл бұрын

    or Right turn Reduction, Left turn Larger

  • @owengao1119

    @owengao1119

    3 жыл бұрын

    Yes, I see your point. Easy to remember, thanks for the share

  • @pilotdyllon
    @pilotdyllon3 жыл бұрын

    Very basic no BS description thanks!

  • @Klaviation
    @Klaviation11 жыл бұрын

    Thanks for the feedback!

  • @Habibiradio
    @Habibiradio7 жыл бұрын

    I can't thank you enough for these videos!!! Thank you so much

  • @GypsyRoseDukes
    @GypsyRoseDukes6 жыл бұрын

    Oh Wow! You make this look so easy!! I can do this!

  • @Paolo-qe7lc
    @Paolo-qe7lc3 жыл бұрын

    Thanks for the very good video. I find too many other videos have complicated concepts which never work when doing in the cockpit. Thanks for the basic method!

  • @AirborneTransit
    @AirborneTransit10 жыл бұрын

    Very nice explanation of holding!

  • @bittersweethood
    @bittersweethood11 жыл бұрын

    oh i understand now!! thank you very much for such detail explanation!!!

  • @iFlyCharlie
    @iFlyCharlie11 жыл бұрын

    Thanks, helped me a lot!

  • @hamadaloun5062
    @hamadaloun50628 жыл бұрын

    good job , very clear

  • @AzzenLoewe
    @AzzenLoewe11 жыл бұрын

    Thank you so much

  • @andrewoyebade
    @andrewoyebade3 жыл бұрын

    Thank You

  • @Mindpeeticha
    @Mindpeeticha11 жыл бұрын

    ur vids help,thx:)

  • @Q8_BoRashed
    @Q8_BoRashed10 жыл бұрын

    how would one normally know what his wind correction is? great explanation!

  • @videorocker256
    @videorocker2567 жыл бұрын

    Tq sir

  • @aramelmi1020
    @aramelmi10202 жыл бұрын

    Regarding the wind correction angle would we still subtract for example 15 degrees if it was a right turn or is it a mirror image and we have to add the 15 degrees wind correction in the teardrop outbound?

  • @Klaviation
    @Klaviation11 жыл бұрын

    I'm not sure if I correctly understand what you are asking. Here's a brief explanation of the intercept: Once you cross the holding fix, fly a heading 30 degrees to the outside of the holding pattern from the outbound heading. In the video the outbound is 180, so we fly a 150 heading. Fly that heading for 1 minute, then make a standard rate turn back to intercept the inbound radial of the hold. In the the video it's a right turn to intercept the 180 radial (360 heading). I hope this helps!

  • @bittersweethood
    @bittersweethood11 жыл бұрын

    so,lets assume there are no wind, after 1min of flying outbound to intercept the pattern,i turn right to 180, how long should i fly that 180 heading before i make a standard rate turn to intercept the holding course