Sound Pack video here kzread.info/dash/bejne/Z3-GzJqLiM6Xoqw.html

This is excellent! thank you!

Brilliant video, Thanks

This is awesome!!! Thank you for taking the time to put it together! I’ve been out of the game for a bit and this covers everything I needed to refresh on! 🙌🏻🙌🏻

@DimmyV

Жыл бұрын

Glad I could help!

Also, I like the way you set up the logical switches and call outs. 💯

@DimmyV

Жыл бұрын

Appreciate that

Flew for 6 year's all was stolen. 2 years ago.. needed a reminder 😉 very well done.

awesome, thank you 👍

@DimmyV

10 ай бұрын

You are welcome!

awesome, thank you

@DimmyV

5 ай бұрын

🍻🚁

Great video

@DimmyV

Жыл бұрын

Thanks

Hi! thanks for the video. Do you know how to inverse the pitch setting?

@DimmyV

Жыл бұрын

You would have to change this on the controller and BetaFlight. However I do not recommend this as it feels very un-natural with flight. Think of a joystick of a plane. You pull back to go up and push forward to go down. For FPV by inverting pitch this would mean to go forward you would pull back and backwards would be push forward. It seems very un-natural to flight and it could lead to confusion. Are you coming from a gaming background?

Thank you for your video! What do you think about "Dynamic power" in radio settings. Some pilots say that it needs to be switched off but i see you use it "on" i'm trying to understand what does this parameter need for?

@DimmyV

Жыл бұрын

To be honest I'm still early on in FPV so I've left it on for now to learn from it. I may change in it future but I also haven't flown far enough. It will essential increase power as you fly further. Don't forget there is interference too from other sources. I would find what best works for you and the location you fly, it will vary.

hi, if you can, please describe about the ligotic switch 3, 4 and 5 what are they for, where do you use them and is there an audio track for them, too, since there is little information about this in the video

@DimmyV

2 ай бұрын

3, 4 and 5 are all to do with the link quality of the Tango 2 to the drone. So if you connection is at 80% or 70% you will get a warning. There is sounds available so one can be selected. There's little information as you said so it's important for the FPV community to share so I anyone can provide more information. feel free. Bardwell is a good source as well as other pilots who fly crossfire. Oscar Liang has some good content too.

Thank you!

@DimmyV

Жыл бұрын

Glad to be of help 🍻 what you flying?

@cold-frontin_penguin7902

Жыл бұрын

@@DimmyV haha nothing yet. To many drones out there to choose. I'm wanting a mid range drone that's whippy. Not sure where to start though

@DimmyV

Жыл бұрын

@@cold-frontin_penguin7902 Have you flown FPV before? where you based too, if there's any restrictions might help you with which drone.

@cold-frontin_penguin7902

Жыл бұрын

@@DimmyV I live in Mississippi. No is haven't flown fpv before either. We have loose restrictions. I'm really looking for a medium range drone but one I can freestyle with too.

@DimmyV

Жыл бұрын

@@cold-frontin_penguin7902 Ok great, I recommend while you look for something start in the simulator, that’s how I learned and will save you from wasting your money if you crash. DRL is cheap and has a good training schedule. Can be found on both consoles and computer. I would get a training drone too something small and cheap to practice on like Emax TinyHawk 3. I know in US there are drone rules so keep an eye on the weight

📌 Important Notice: As this video has been available for some time and has garnered significant interest, it is now offered as a paid download for a small fee to support the channel's long-term growth. Your contribution helps us create more content. linktw.in/QGEpMk

Hello my friend ! Just a question. What is "betaflight setup" used for in tango? Basically, if we click on it, what happens?

@DimmyV

6 ай бұрын

Betaflight is the software you need to setup your quad and make adjustments. I recommend watching Joshua Bardwell videos on that.

Damn. I just ordered this controll. I've only used dji vista and o3. Super easy. This makes me wonder if i made a mistake going to tbs?? So complex 😂😂

@DimmyV

Жыл бұрын

It’s not that bad. I’ve tried my best to simplify the setup.

this is old but hopefully you can answer for me this video has help be tremendously but on the logical switch's I'm stuck. v1 section mine doesn't give me the option to make it say RX BT

@DimmyV

2 ай бұрын

I need to take a look at this it’s been a while. The beauty is once it’s setup don’t need to look at it again and can just fly

Hey Demetrios, i am new on the hobby, looking for my Tango 2 some sounds like "arm" missing at all there is no such sound available on the device. Is something that i can add?

@DimmyV

8 ай бұрын

I actually have a video with the sound pack for this. Link will be in video description 🍻

mate i didnt understand a word of that im just starting out and im trying to bind me tango 2 to my Nazgul evoque5xframe v2 with 03 unit, I need a tutorial that i can understand as a brand new fpv drone pilot this is literally my first real fpv drone after flying with the dji fpv drone... any suggestions for me to get it all set up and configured with betaflight and set the switches on the controller bud? im really stuck here and i just want to get out and fly my £1.000 worth of things lmao :(

@DimmyV

6 ай бұрын

Hey Frankie. Mate I get it. I’ve been there. All I can say is watch more videos. I was literally watching this and it made me think of your comment. Your going to want to want it kzread.info/dash/bejne/dGWfx7qPaJnPj8Y.htmlsi=TW9LoIc6ilWPU6Pa

if im using 6s battery so i will set it to 22.2v? and for the critical battery if i set it to 4.4v is it ok? im new to fpv.. hope your responds help my friend.

@DimmyV

4 ай бұрын

So 14v is for 4s 14/4 = 3.5v which is the per cell for low voltage warning 13.3/4 = 3.3v which is the per cell for critical voltage warning for 6s you multiple the 3.5 x 6 = 21v for low battery 3.3v x 6 = 19.8v for critical voltage warning If you prefer to have a higher threshold for a warning your adjust your per cell voltage by 6. For example you low warning you prefer to be 3.4v then you multiply this by 6 so 20.4v. I hope this explains it. You might want to research the threshold for 6S lips like when it's a good time to come into land and when you should landing immediately. If it were me I'd keep as is for 6S but I haven't got to 6S yet. If someone has experience and reads this appreciate your input.

I love this video! But quick question: Does your radio have a static noise in the background of voice callouts that varies every time you turn it on? Sometimes when I use my radio it sounds like an analog TV and other times it sounds clear and I think it varies based on the battery voltage. Is this normal? 🤔

@DimmyV

Жыл бұрын

That I am not sure, the audio won't be the most amazing quality though as its limited to one speak so it will sound a bit like analog TV, which I kinda like. Playing back on my Mac is fine it's clear. I reckon if it Tango had another speaker it wouldn't be a problem but then again this isn't the controllers primary function so I can live with it.

@Swole_Gecko

Жыл бұрын

@@DimmyV so sitting here messing with it I just noticed if I switch it to 25mw the audio is clear and switching to 1W the audio is very staticy/buzzy meaning the audio quality is tied to how much voltage the radio is sucking out the battery. At least on mine.

@DimmyV

Жыл бұрын

Nice, I think I kept mine at 25mw

I have 2 fpv quads and bounded one by one. I used the first quad and changed to the second one. Do I need to rebind the second quad again?

@DimmyV

5 ай бұрын

you shouldn't have to, unless its between the VISTA and O3 then you do.

@myfpvshots

5 ай бұрын

@@DimmyV Thank you

how to calibrate the sticks？i cant find it in the new menu😭

@DimmyV

11 ай бұрын

Long Press Menu, Page 5 and there you go 🍻 kzread.info/dash/bejne/ZWFks7GfY9KaYqg.html

Good afternoon, thank you for the information, but in your video I didn’t see that you put sounds for L3 or L4 somewhere. or this is not necessary and warnings and it will be like this without a special function

@DimmyV

2 ай бұрын

Someone had the same question the other day, essentially when the TBS signal is low you get a warning, I haven't flown that far to be out of range to test this, normally goggles would go first.

@safspy

2 ай бұрын

​@@DimmyVOK, thank you. I probably expressed myself poorly, or you misunderstood me, but thanks anyway for your patience and for your answer. I’ll try to figure out how it works myself.

how can i inverted the throttle so when i push down the stick for gas, ich trainined all the simulator with this setting? Thanks for advice

@DimmyV

Жыл бұрын

That’s interesting to fly that way. I personally wouldn’t recommend this as it’s not natural. However this would need to be configured on betaflight. Joshua Bardwell has an in-depth tutorial on his channel.

@marcreuther1818

Жыл бұрын

@@DimmyV Ok, thank you i will try to learn that normaly.

Hello i was wondering im using a 6s lipo what do i set the bat call out for when it gets low say 3.7

@DimmyV

2 ай бұрын

Multiply by 6. If 3.7 v per cell is your low battery warning then 22.2v.

@aarondodson1261

2 ай бұрын

@DimmyV thanks I did that but it's still calling out at incorrect voltage I'm not sure why

@DimmyV

2 ай бұрын

Hmmmh I remember vaguely this happened to me when I reset my tango 2 but can’t remember what I did to fix. Try turning the drone on and off. Is a LiPo plugged in (I know basic but try everything). Take a look at Bardwells videos maybe need a configuration in betaflight I remember looking at this too. Check settings again incase you missed anything. If you do solve it appreciate you can reply so we know what the issue is and others can see.

super confusing how you say to download the agent lite and show how to do that, but then you're using the agent desktop to do everything with no mention of it at all

Hello Demetrios I ask question for you, I don't find calibration for my TBS Tango 2 Pro, it's new menu with 11 page and i can't find. Can you help me pls 🙏

@DimmyV

10 ай бұрын

If you referring to the sticks someone has asked that before Long Press Menu, Page 5 and there you go 🍻 kzread.info/dash/bejne/ZWFks7GfY9KaYqg.html

@BastienChaillot

10 ай бұрын

@@DimmyV thanks dude 🙏

I know this is quite an old video so guess they have updated the Radio Firmware. When I try to setup the logical switch I don't have the RxBT option.

@DimmyV

4 ай бұрын

That is interesting, I haven't check for latest firmware or if this has an effect, but this is good to know. Personally I wish they would make this simpler and more friendly but its better than most.

@xrayhead

4 ай бұрын

@@DimmyV It was my fault, I had not done a "Discover Telemetery" with the Quad so the options did not show in the Tango 2 🙂This is the fist video that has made sense to me, top work my friend.

@DimmyV

4 ай бұрын

Appreciate it bruv. Glad you managed to get this sorted. Hopefully Team Blacksheep can improve on their system further 🍻

ony my there is no general option. I can not switch 8ch to 12ch. On betaflight i can not use the e and f buttons. Any Help Please?

@DimmyV

11 ай бұрын

It's the very last part of the video 16:34

11 ай бұрын

@@DimmyV yes yes i know but on my tango 2 pro. There is no general option. There is radio Settings. But nowhere 8ch 12xch switch

@DimmyV

11 ай бұрын

@ oh interesting, is the version 1 board?

11 ай бұрын

@@DimmyV no it’s v3. I can enable 1w power

@DimmyV

11 ай бұрын

@ sick. Also very interesting. I can’t imagine the manual being any different. Is it latest firmware maybe it’s changed?

It would great to explain what things you are about to do are for. For example, you start talking about Betaflight. Maybe just say what it is, what it is for and then keep going. Thanks

@DimmyV

Жыл бұрын

Appreciate the feedback, that’s a valid point. FPV is already an overload early on and BetaFlight is something we all need to learn. I will always point new pilots to Joshua Bardwell playlist as he’s covered it in-depth. I will keep in mind for future videos. 🙏🏼

@peterkortvel

Жыл бұрын

@@DimmyV anyways. thanks for the video! very helpful

Why i can't find arm, disarm, angle ?

@DimmyV

Жыл бұрын

The button or the sounds? You can find the sound pack here: kzread.info/dash/bejne/Z3-GzJqLiM6Xoqw.html

@angeloschristou

Жыл бұрын

@Demetrios I mean it's not in the list to choose from like in your video.

@DimmyV

Жыл бұрын

@@angeloschristou it’s definately in the download as I just checked it. Did you copy the files to the right location?

Where did you find one bro they’re out of stock everywhere

@DimmyV

Жыл бұрын

Mate I know it was hard and had to pay a bit of a premium. Lots of FPV stuck is limited. I got mine from NORDFPV, it's currently in stock. I would also just do a google search and go to shopping tab and see what comes up.

@creasedaf1s900

Жыл бұрын

@@DimmyV wow mate that’s litterally the first one I’ve found ! Im willing to pay the premium lol , is that the newest version ? With the v3 PCB?

@DimmyV

Жыл бұрын

@@creasedaf1s900 I’m not sure it’s the pro version which is what I wanted. And yeah I was in same boat. Had a Cinelog 25 and no controller.

@creasedaf1s900

Жыл бұрын

@@DimmyV i believe you go into settings and check About - Hardware version, Version 2.01 or later is the v3 pcb

@creasedaf1s900

Жыл бұрын

kzread.info/dash/bejne/k4uaqZmCgdbAZ8o.html he shows how at around the 2:00 minute mark! Did you buy recently from nord ? If so could you let me know if it is the most recent?? If so I will go out and purchase immediately ! Thanks for your help mate I appreciate you can’t wait to see more of your posts

Hey man having trouble getting the sounds to work. Tried several times..followed closely. Something else is going on.

@DimmyV

7 ай бұрын

Did you check the PDF there’s also a guide there

@RBRCbashem

7 ай бұрын

Yes. I can get it to work when I change the name of the file to an existing one on the tango SD card, then paste and overwrite. It will not work by just adding .WAV files to the SD card. Why?? Thanks for the reply! @@DimmyV

@DimmyV

7 ай бұрын

At least you got it to work, very strange you had to overtime the files, as I didn't have to do that. Anyways this can be a solution if anyone has similar issue. 👍🏼

I think he actually downloads the TBS Agent Desktop in the first section of instructions, not TBS Agent Lite

Nice thumbnail....i saw that giant screen on tango 2 and was like sweet theres an oled bigger screen mod for tango2 😂😂😂😂 im such a jackass

@DimmyV

6 күн бұрын

Hahahaha sorry mate. Wish it was that big too but wanted to make the video visible and focus attention. Hopefully TBS make a Tango 3 🙏🏼

Are you on IG ?

@DimmyV

Жыл бұрын

Yeah @dimmyv

can you drope your profile ?

@DimmyV

6 ай бұрын

Not sure what you mean by this

@ugovanmalderghem

6 ай бұрын

@@DimmyV Share your model with all the settings

logical switches are unnecessary to settup fyi

@DimmyV

Жыл бұрын

I wouldn’t say unnecessary but a nice to have.

Omg you changed my life 🥹😂😂 thank you so much

@DimmyV

4 ай бұрын

Happy Flying 🍻