I finally joined the 99% crew right when the tango 2 came out. Lol. Definitely getting the radio. Can’t wait till next paycheck.

Waiting on my Tango 2 pro, it's so painful to wait xD ! Nice video as always homie, you're da bomb !

Had the same reaction with the position of the neck strap. I went from way up high using the radio as a “shelf” to really low and tilted forward like you. Ended up trying without the neck strap and liked that best.

I really like your demo of the new tango 👍You just made me want to buy this radio. 🙈

Thanks for the insight man. Helps me a lot concerning I'm thinking about buy one and moving away from my full size Crossfire and Taranis XD9 plus remote.

i want to get into fpv and play around with a cinewhoop but this hobby is so complicated lol

Omg! You have like a million drones behind you😍😍😍🤪 Nice vid by the way👍🏻 Just purchased the Tango.

I bought your new motors and G damn! Those some smooooooooooth 6S motors. Love em bro good work

@ummagawdFPV

4 жыл бұрын

Thanks 🙏

Some great points that haven’t been covered yet

Tango 2 looks dope. At first I was interested in it, but the more I see it and hear how people are using it, I'm considering it now.

Just seeing your video for the first time and I appreciate your thoughts. I got the non-pro edition and it DOES have the neck strap mount. It's my first true radio, and I'm very happy with it. For now I'm only using it for FPV FREERIDER Recharged on my Sammy Note 20 Ultra, but hope to get a cinewhoop or something in the near future.

Dang, makes me want a tango 1

Smashed👍👍 been waiting for this for ever!

@LatKiwi

3 жыл бұрын

Mmmmmmmmmmmmmmmmmmmmmmzcncncnn

@LatKiwi

3 жыл бұрын

Mmmm

@LatKiwi

3 жыл бұрын

Mmmmmmmmmmmmmmmmm

Was considering this over the tx16s with crossfire for the convenience and form factor. Ended up choosing the tx16s ultimately for multiprotocol support since I fly tiny whoops and for the lesser cost in the long run.

@madebyandre_

3 жыл бұрын

Dang, now the tango 2 supports multiprotocol. Now i think it really is the ultimate controller.

Great review and that hat is dope mate! I need to get one ASAP 🚀

@ummagawdFPV

4 жыл бұрын

Sinned FPV about to restock at www.ummagawd.com by end of this week, and I’m introducing a new color 😜

Great video! Thanks! Can you, please, make video about air mode on a switch? Why do you need that? Fly and trick examples...

Tango 2, the hands down best second controller you can buy. For me this is the perfect radio, I am a student and only have 2 5” racing quads that both run crossfire so my whole fleet is covered. My current radio is the x-lite with the internal crossfire mod so I would get the same rf performance for a huge bag space saving and time saving on setup. Having a lightweight and fast setup is a goal for me, this could allow you to arrive at your spot and be flying in 60s. I think with this I could get the whole drone bag with a field pack under 5kg too. Take it mountaineering! It’s just a shame I’m poor and can’t afford it 😥

Just to add: gimbals are so smooth! Fit is indeed perfect, it stinks there is no bay to add multi module or full size crossfire, with that it could easily become one radio to rule them all.

Its wierd before I hade to stand to fly but with the tango 2 I'm much more comfortable sitting.. just like you said great in the hand but the arms weren't right so I sat down and..... perfect i was getting tired of finding something to lean on

Nice work Tommy! I’ve had the Pro for a few days and I also pinch. It feels great in the hands tbh. Only thing I had to change was the gimbal tension, stock was too stiff for me. Oh and I had to increase the height of the stick ends 👌

@ummagawdFPV

4 жыл бұрын

ARI3S same, soft is the way to go

You described exactly why I want it, not having to assemble the big TX. Having a big radio for long range is just fine. I see a lot of reviewers do a who is this for, I think it’s for everybody, I think that everyone who used CF will have two radios from now on. For whoops I always take a NoRX FC and put in Crossfire anyway, just because “I can”. Also Trappy is talking to Bob Roogi about integrating CF in a whoop/toothpick FC. It would be nice if we could share the bindings between the big TX and the Tango 2, maybe Trappy can do this with the cloud?

resting your arms, you need bigger stomach, perhaps couple of beers each day? : D

@ummagawdFPV

4 жыл бұрын

😂

@MysteryD

3 жыл бұрын

I know a dude with 10 hours of sim experience who this would be perfect for.

excellent video, thanks much. Any chance you could make a video on updating the firmware using the 2 back momentary switches you mentioned? J.B. put out a video, but if you read the comments, a very large portion of the people said they ended up messing up their radio after following the steps in the video. Im still quite new to FPV and your videos helped me out a lot, your help on showing how you updated the F.W. would be a greatly appreciated. Thanks.

Getting one soon as they restock

It's great review! Very useful man! 😄 good job! 😎👍💯

Great review 👊

Having trouble with setting my end points on the Tango 2 in betaflight. Even tried CLI commands. The throttle end points especially are not changing to 1000 and 2000. Any ideas?

Love the editing skills 👍🏽. I'm team black sheep now lol. Great vid Tommy

I ordered the standard one. I really like my Nirvana but I don't need a giant screen I do nothing with and I only fly crossfire. It does irk me that I had to order the lousy neck strap mount separately. Margins must be razor thin for a silly move like that.

Tommy I just got my first 5' kwad...its the Ummagawd remix v2 with your motors. Cant wait to fly it.

I have to get one!!!! I means it’s definitely a must😜

Really want it.. That is The Evolution of transmitter

How many springs come with the gimbal replacement kit? I swore there was 4. I added the softer ones. Somewhere along the way I noticed 1 extra stiff one making it 5. Again there may have been 5 but I thought I counted 4. I put the radio back together. Everything works nothing seems loose or anything. Did I count correctly?

Tommy, can you do a Kiss Idle up radio setup on the Tango 2 using button A for arm and E for Idle up?

11:00 same problem for me, i am switching from a CNC Gimbal RadiomasterTX16S to a Tango2, because i go 3 months backpacking in South East Asia with my FPV Stuff....i cant really get used to the feeling on my stomach/hand kombo....i would have loved to see, that somebody skiled would maybe do a Print or a Acessory for the tango two that i could clip onto the radio to make it bigger :D

Hi, i couldn`t set Arm and flip over crash mode in GUI....the only one working is aux 3 which is the buzzer...need help plsss i did it in betaflight...

preordered 2 months ago still waiting.

Your reviews are always the best!

Hey! Hello, I have some issue with TANGO 2... don't recognise the YAW movement ... I'm doing something wrong or the RC come bad?

Hey nice video. I need help. My tango 2 binds with my tbs xFire nano rx but I get no stick movement at betaflight :( With my taranis x9d I had no problems. Do you have an idea ?

is there anything this small that has cross protocol platforms (like radiomaster). not sure if I want to get locked into crossfire.

Sorry a noob question. if i use 1200MW hack on the dji radio. Will that mean that it will have a better range than my Tango 2 ? I watched some videos and i thought the main reason for Tango 2 is a better range? doesnt Tango 2 have max 500MW?

Is this compatible with frsky receiver? Thank u

Is this a good transmitter for long range?

sweet review , IMO the pro version should have 500mw then I would be all in ... love the small form would be great for hiking / biking with a quad

@kwadkrazy6078

3 жыл бұрын

500mw is here! for pro and basic

Dopeee. Editing my review rn lol

I started out on the micro crossfire, then spent the additional 200 bucks on the big brother crossfire for the added features it offers, I just don't understand why TBS wouldn't make the tango 2 compatible with there own crossfire module? I'm not getting the Tango 2 just because of that. And the hand rest / arm positioning you mentioned. Sucks because I was really looking forward to it with all the hype that's been going on for years now... 🤦‍♂️ Good thing I bought two Taranis x9d's ! 🤘😜

And yeah, agentX is a pain on the Mac. What u\su\ally works for me is: open AgentX, *then* plug in the radio and turn it on, then hit USB (Agent) in the pop up, then wait a little bit (like 10-15 seconds), and the tango should populate. For some reason scrolling to the bottom of the list and back up seems to help too? If all that doesn’t work, restart the computer and repeat, that should “fix” it. And by the way anything you plug into AgentX I find this to be the most reliable way to get it to connect.

is it just me but setting up a taranis doesn't take that long. that being said I don't have any protection on my radio like a case or gimbal cover, I leave crossfire in the module bay and I leave my crossfire antenna on. so he has a few extra steps but I have found none of that is needed

@jessjoshwyatt3571

4 жыл бұрын

I would think leaving the module in would protect those pins a little better than leaving it open to anything being able to hit and smash them but I think he's only saying and doing all that to make it seem less gimmicky about how hard it is to press a power button and I also leave neck strap connected to transmitter.

Wish someone would be honest and bring up the creek cutoff!! I had to pay for mine and only one that but one and did a review seem to bring this up lol.i like mine but still in some cases this is an issue for sure

Tango 2 isnt for me but something of small note from your crossfire mounting/unmounting. I have 2 or three times forgotten to install my damn crossfire antenna before powering up. Reason being is my stupid X9D had that stupid 2.4ghz antenna still there and I would forget about putting the 900mhz antenna on. So I wound up making a gimbal protector that locks into place with the lanyard on the balance bar so you cannot remove the protrctors without removing the lanyard. My gimbal protector is also my 3D whip 3db crossfire whip holder... so I have my antenna in my hand to put on before I can even take my gimbal protector off. I like the crossfire module with mavlink/bluetooth/500mw-2w too much to ever want to change of it. But it can be a headache to store and be compact.

@ummagawdFPV

4 жыл бұрын

I’ve done the same 🤫😂

@dividingbyzerofpv6748

4 жыл бұрын

@@ummagawdFPV this last weekend was my worst bonehead mistake... After flying with an external battery powering the crossfire I took the antenna off, turned the radio off, put in my bag. 5 hours later when I am at home unpacking I take my radio out to find crossfire still plugged in with the thing hot as hell due to no airflow. It was on 500mw for 5 hours with no antenna. Trappy says it should be fine but in the back of my head I will always remember that issue and whether it may lead to a failure. /facepalm

@peterzingler6221

4 жыл бұрын

It won't burn through without an antenna tho.

Wish it allowed a module. Would actually spring for a module with this radio to run D8 for micros and whoops but never would for X-Lite Pro.

Nice

Wish it had FRsky protocol as well. I love it but......

great size, but what about whoooops?(

Can u please give me your kiss PIDS for 6s. I use your betaflight 4.1 pids and rates on one all of my betaflight quads as my starting point for my tune. I need a good starting point for my KISS quads. I am also using your rates on kiss. There is not much out there in the fpv community for 6s on kiss for a realy update tune on 6s with all the new combos that can be used I can use a 1950 kv motor and I have 1750 kv also. Just let me know what would be best with your tune. Thanks

Pretty sweet remote, got mine a couple weeks ago just waiting on a couple more parts for a first go. Quicks question if anyone is reading this, can you fly with the dji goggles with crossfire receiver and would this be a decent range setup if so?

@ummagawdFPV

4 жыл бұрын

Yes and yes

@WSWarriorsStew

4 жыл бұрын

Thanks man, win win for me :)

LOL, you said put it back in my radio at 9:20

@ummagawdFPV

4 жыл бұрын

Yes I did... 😂

Yo let’s see a KISS build with your frame and motors bro! Your using crossfire LUA to control the fc?

@ummagawdFPV

4 жыл бұрын

A.I. Thinker yup!

Looks great. Just wondering, Is there any concern that the Gimbals can fold down during flight? Seems to be my only concern

@WarraGp

4 жыл бұрын

Mike Nichols Hi Mike. For the gimbals to actually fold down you need to pull them up. Thers absolutely no chance that they will fold down during flight. So you dont need to be concern anymore ;)

@michaelnichols1977

4 жыл бұрын

@@WarraGp thanks mate!

Does it feel like the old 72MHZ gimbals on futaba's

@ummagawdFPV

4 жыл бұрын

I can’t say that I know what that feels like lol

this or jumper t16?

For me being a wing pilot and not having trim switches available without looking it’s a little scary. But, if double pressing the scroll button and knowing how to get to the trims it’s a small challenge. I’m glad that there are trim settings on the radio. Will most likely be buying it soon!

how you setup the momentery switch for flip over ?

@ummagawdFPV

4 жыл бұрын

Quadtastrophe set it up as a switch to bypass the 3 position switch (in the mixer)

wait, what's the reason you got airmode on a switch still? I haven't followed why you still do that. what's the advantage of it?

@PinchTune

4 жыл бұрын

Landing cleanly is a lot easier with airmode off. If you are going to perch on top of a flagpole, more than likely the airmode bounce will knock you right off.

@FRY_FPV

4 жыл бұрын

@@PinchTune oh now I remember! I see! I never really had an issue with bouncing landings so I never understood what it was about. Just disarm when it's still 5 meters high up... I'm joking haha 🙈 Actually Danny, you might know that better than Tommy: does Flightone has airmode on all the time as well? I've never seen an option for disabling it

@FRY_FPV

4 жыл бұрын

@@PinchTune oh now I remember! I see! I never really had an issue with bouncing landings so I never understood what it was about. Just disarm when it's still 5 meters high up... I'm joking haha 🙈 Actually Danny, you might know that better than Tommy: does Flightone has airmode on all the time as well? I've never seen an option for disabling it

@PinchTune

4 жыл бұрын

​@@FRY_FPV That's a good question. I'm not sure because I always fly with airmode on. Granted I went to perch on the edge of a building and bounced right off the other day. Haha. One thing though, on FL1, "airmode" isn't active until you throttle up the first time. So essentially you know how Steele can hold his quad in hand and move it around and it doesn't react? We'll like that, when you initially arm it. But once you throttle up it "turns on" airmode. I'll have to check in the group to see if idle up can be done or it it can be put on a switch.

Do you have a build list for a freestyle drone for under $250 to $300

@ummagawdFPV

4 жыл бұрын

That budget is a bit tight depending on the components you want. My build list is basically what I carry on my store. Check it out

@kschlagel

4 жыл бұрын

ummagawd ok thanks

Could it be any better ? Sarcastic!!

Dji radio does it for me. Latency 2.5ms

Awesome review, dude! 😃 Yeah, I hope they can change it in the future to include a JR bay, or at least a smaller one like on the X-Lite. Because this radio + a multiprotocol module would be fantastic! 😃

*Hall sensors en.wikipedia.org/wiki/Hall_effect

I requires all my gazillion switches and my big color screen :) No, really, I do, I use them all. Except, well, the sliders and pots. Give me time. I'm getting to them.

I want to like this....it has so much done right. But locked into crossfire only makes it a pass for now. I have faith in the community to mod this to allow other protocols....something TBS should have done in the first place smh

@PeterKornum

4 жыл бұрын

Commitment isues? Just buy that one extra CF receiver for that on whoop you plan to (but hardly ever fly) it’s really not a big problem... and why should they support an other brand.... (the other brands don’t support CF) i assume, that you do know that the other protocols are an other company’s intellectual property.... the multi protocol modules are stealing from an other company.... I really like that Tbs only use stuff that is their own product....

@PortalFPV

4 жыл бұрын

@@PeterKornum it would ground 4 other kwads....so no thanx

Why is it so dark?

@9:22 collapse the sticks , fold the antenna down and put it back in my radio 😆

@ummagawdFPV

4 жыл бұрын

EricbFPV 🤫

@ericbberry

4 жыл бұрын

@@ummagawdFPV hehe

we should, but not in stock worldwide.☹️

Make that radio a medium size like the X9d lite and I'm all in.. But this game pad style no thank you

Looks nice, but with no expansion bay for a multi module , its kinda pointless.

Plane pilots will have a hard time trying to trim out their planes when you have to go through the menu to get to the trims.. would be a nightmare when you maiden flight..

When are you going to do that kiss video you where talking about?

Im byin😎👍

Can I have the old dusty tango

so for 60.00 more u can laydown the sticks ,,,,,thats a bit more

pretty lame they dont include the neckstrap holder. 40 dollars for just these foldable gimbals is pretty expensive.

For me A game controller style radio gives me never the grip and comfort/trust as a traditional radio does. Just ergonomics.. so never a game controller style for me!

@peterzingler6221

4 жыл бұрын

Also people think you're an absolute idiot

YO! i bought 3 remix frames that workedd strait out the boxxx from newbee drone with blue hd power motor deal got a set of 3000kv ! dope crazy shittt lol i learned about brown outs full sendLOL $TAY UPPP* *3 P's for triple dose of precise perfect pimpin yo if i see anyone rocking a clone frame im gonna brown then out full send k.o. fpv style

@ummagawdFPV

3 жыл бұрын

😂

It's too cheap, bro👍🏻👍🏻👍🏻💯🙏🏻😁

tango2 .... bad radio data aka sd card issue one of three instances only 3 wow i should buy a lotto ticket lol .... but #mikechin is a problem solver ... and #botgrinder is correct mike is a legend maybe if they came out with gold dip bling , like the remix .... facts

@ummagawdFPV

3 жыл бұрын

That sounds like a lot of work

That's bigger than a Xbox controller 😆

Tango 1... such a beloved icon that it wasn't even worth dusting off, even for the purpose of promoting the Tango 2.

The hardware is awesome, but locking you into a single protocol is lame.

I will stick with my awesome JUMPER T16.... Soo..... Tango can just dance it's happy little A$$ on down the road!

@ummagawdFPV

4 жыл бұрын

I was actually eye'ing that radio for a minute.... awesome radio

@paulflindt

4 жыл бұрын

Ok /eyeroll

Booohoooo ... “my Ummagawd stomach is too small..” I was soooo close to unsubbing , 😂😂😂

No

Sorry, Trappy but just copying the design of basically any gamecontroller doesn't cut it for me. I've seen this shape before quite often - some might even speak of cloning...^^ 🙄🤷‍♂️ This thing is snake oil and nothing more. FrSky already did the controller-style radio and as great as Crossfire might be - lately I heard people don't like being locked in to eco-systems. Great review though, Tommy. Thanks for putting in the hard work.

@NorthStarDrones

4 жыл бұрын

Totally agree.

LAST

Oh god, you got the coronavirus...

Its garbage ... flimsy shit.. press anywhere on the casing and watch the gimbal centres move..