Thanks! Almost crapped my pants when ignored the + thing. Your video saved me!
@niZmosis4 жыл бұрын
If you do them individually, instead of a count down it will have you press enter to continue. I found this to be more precise as I could line them up perfectly.
@Rcschim3 жыл бұрын
cool wayne! the important part for me was: after the 3-2-1 phase, where you need to move in + pattern, I think it's best to only draw one really good + on each stick - and not multiple... Initially I thought I messed up my tango2 when changing the board to v3... but now the sticks work without having to take the radio apart again :)
@gerki_fpv
Жыл бұрын
same by me :D...
@jamychan10632 жыл бұрын
thx !
@Jivaromodelsvideo3 жыл бұрын
Thanks Guy! ;)
@kkam70444 жыл бұрын
Thanks, I could not work out what move in + pattern meant until I saw your video, in hindsight it was obvious! Have you found the gimbal tension to be too high and cause vibration?
@NeverenCH4 жыл бұрын
Thanks for the video :) Do you know how to adjust Throttle/Pitch Throw on the Tango 2 ? They list it as a feature of the Transmitter but i can't find anything about it online.
@TeddyH794 жыл бұрын
Wayne, what do I do if the right stick doesnt read input during calibration?
@alexprofpv3 жыл бұрын
thank you bro )
@jgodardcm4 жыл бұрын
Wayne, could you do a setting failsafe video?
@waynefpv
4 жыл бұрын
setting failsafe is the same as the regular XF module via LUA. Short press MENU > CROSSFIRE MENU > Tango II XF > Set Failsafe
@pdfoo7oo3 жыл бұрын
thanks saved the day
@doktordrone4 жыл бұрын
thank you :)
@nananghp
3 жыл бұрын
Om punya saya di kali brasi tetap error.ada solusi nya om
@Dzejwor_Gromowladny2 жыл бұрын
This procedure is jus horribly bad designed - old taranis x9d do this MUCH easier and much more precise.
Пікірлер: 16
Thanks! Almost crapped my pants when ignored the + thing. Your video saved me!
If you do them individually, instead of a count down it will have you press enter to continue. I found this to be more precise as I could line them up perfectly.
cool wayne! the important part for me was: after the 3-2-1 phase, where you need to move in + pattern, I think it's best to only draw one really good + on each stick - and not multiple... Initially I thought I messed up my tango2 when changing the board to v3... but now the sticks work without having to take the radio apart again :)
@gerki_fpv
Жыл бұрын
same by me :D...
thx !
Thanks Guy! ;)
Thanks, I could not work out what move in + pattern meant until I saw your video, in hindsight it was obvious! Have you found the gimbal tension to be too high and cause vibration?
Thanks for the video :) Do you know how to adjust Throttle/Pitch Throw on the Tango 2 ? They list it as a feature of the Transmitter but i can't find anything about it online.
Wayne, what do I do if the right stick doesnt read input during calibration?
thank you bro )
Wayne, could you do a setting failsafe video?
@waynefpv
4 жыл бұрын
setting failsafe is the same as the regular XF module via LUA. Short press MENU > CROSSFIRE MENU > Tango II XF > Set Failsafe
thanks saved the day
thank you :)
@nananghp
3 жыл бұрын
Om punya saya di kali brasi tetap error.ada solusi nya om
This procedure is jus horribly bad designed - old taranis x9d do this MUCH easier and much more precise.