Just for your statistics: I knew about the 6pos switch calibration :P

@copternutFPV

2 жыл бұрын

Bloody do-gooder 😁

@novaracer82

2 жыл бұрын

Always do it for statistics!

You are the best teacher ive had! Never have I had an issue not solved. Some patience and Bardwell does the trick everytime. Thank you!

Had already learned about the sticks before from you, and learned now about the 6 position switches. Thank you for all the helpful information that you provide and keep up the great work 👍!

After all these years I found The only video where I did not learn anything. But please keep up the amazing work you truly are a inspiration to the hobby.

I was struggling with this yesterday. Thank you for the timely and valuable information!

Great tut JB! Always learning!

Things are making more and more sense lately. Thank you.

Thats some great detail thanks ... I've just ordered my tx16s so I will definitely be sure to come back and re watch this again to set up my controller

You are awesome Josh. The thing that I like the most is that you show the Radiomaster or any other openTX/EdgeTX and you talk about airplanes too. 99.99% of the channels that talk about these radios, ONLY talk about multi rotor like, theses radios were made just for them. Right now as I write, I am installing a Radiomater TX16S on a 35% size airplane, using 2 Graupner receivers and a 120cc gas motor. So thank you, airplane guys do appreciate your effort to mention us

As always - great content Joshua, you are my No.1 FPV related source of information!

Great video! Like the small details Joshua!

I didn't know any of this before today. Thank you so much! Very appreciated 🤘

Super helpful video, fixed my problem with the Tango 2 super fast! Thanks!

I also learned it in previous videos of yours, still good to reiterated for newer members. Ah man those gimbals got me drooling!

@anthonyeden931

2 жыл бұрын

Me Too, Me Too! Resisting the temptation to install the AG01 Gimbals

@adolfredohernandez9439

Жыл бұрын

I'm on the same page...

Thanks for the video I started into the hobby about a year ago and learn something every day. Keep making videos and I will keep coming back for more.

Nicely explained thanks JB, I didn't know about the 6 pos switch.

Awesome, Joshua! Thanks a lot! 😊 Stay safe there with your family! 🖖😊

Thanks for all ya videos JB, I knew about that tricky 6pos switch on the TX16S.

Thx u so much. Before I tried calibrated more than 50 times still not perfect but after watched your video, really save my time. Good job.

While you were talking about the Tango 2 you looked at the camera and it felt like you were talking right to me. A couple weeks back I was having the "Throttle Warning". You helped me figure out the issue in a thread in TBS Lounge. I am sure this video will help lots of pilots, Noob and Pro.

Yep, your right as usual JB, I didn’t know that. Thanks for sharing.

@wingsounds13

2 жыл бұрын

What about his left?? :)

Yes 🙌🏾 thank you bardwell my tango 2 been annoying me with that warning thanks for taking the time out your day too 👏🏾👏🏾👏🏾

did not know, but I do now. Thanks JB. Y are the GOAT.

delicate touch helped me calibrate my throttle hall sensor M9-R properly; you're not the only author of this method but a trusted source so I am able to listen to your script versus watch you calibrate your head from side to side! just teasing; thanks for your thorough technical advice. i will remember these procedures when I jump to the Radiomaster with the AG01 hall sensors

yep learned something today. Thanks JB!

Great tip! Had this on my Tango 2.

Thanks jb for putting this up. I can definitely relate to this mistake

Awesome info!! Thanks JB

YOU ARE A LIFE SAVER/ thought I messed up my number t pro after taking it apart and reflashing it. thank you a million.

JB, I think you should add this as a tip when calibrating Tango2 - Its a lot easier to calibrate one gimbal at a time instead of both simultaneously, and that way you don't mess up the process.

I only knew about the 6 position switch because you briefly covered it in a different video. Thanks JB!

Did not learn anything new this time but I am very grateful mr Bardwell is able to have the time to explain drones to us some say he rambles I say he teaches completely how to fish not just here is a hook here is a line here is a worm so thank you Mr Bardwell keep rambling because I don't want to just do I allso want to know why happy safe flying. Indiana drones fpv

Great video JB this was helpful even for an experienced pilot 😀

Great video! I get that throttle warning every time, now I know how to fix! Love my Radiomaster TX16S Thank you

@JoshuaBardwell

Жыл бұрын

Glad to help

Knew about everything in this video. Learned about the 6 buttons when researching info about the TX16S before purchasing. I didn't learn anything today but watching and commenting for the analytics. 😁

My tango 2 has been doing this for several months, but it was such a minor thing I never bothered to look into it more ( though I was pretty confused about why it was happening!) Thanks for helping me sort it out!

Joshua, you are a Godsend! Thank you!

I didn't know but my excuse is i just got the radio. I did wonder when i was calibrating what the center scale was for and figured some where along the line it would show up. Yes, i did learn something today. Thanks for all your effort Josh

My Taranis has an actual 6 position knob, and yes that has to be calibrated too. I do like the buttons that let you go directly from 1 to 6 without going through all the other positions and activating whatever function is under there.

OMG Joshua I knew it because I saw your video a while a go and didn't correctly the calibration process and I learned something that day! 🤣🤣🤣

Did not know this Josh, thanks for this video

I did not know that about my TX16S. Thank you!

You taught me that about the 6-position switch in a recent video when you installed the new gimbals. I'd not known previously. Thanks!

Thanks for the video Joshua, i definitely learned something today :)

Amazing! So much to know that makes everything all that much better, thank you

Ok, so I somehow missed this video when it came out. Thanks so much JB for referring me to this. I literally just ran this calibration today and noticed the number 1 at the bottom, I pressed the number 1 and I think one other button to see if it did anything, it did not, so I assumed it was for something else and ended the calibration. After watching this video I tried again and realized that you have to press all the numbers at least once before it starts working right. Wow can't believe I missed that!

I did not know about the 6 pos. calibration. Thanks for the tip.

I only knew about the 6 pos calibration because you told me in the jumper t16 setup video. Thanks jb

Yep new this one but thanks for the update never know when we might miss something 👍

Don't have that particular radio, so didn't need to know about the 6 position, but did know about calibrating the pot on my taranis x9 lite. Did it once, and haven't had to since! Great info as always!

I installed some Frsky Hall Sensor Gimbals in a Spektrum DX9 and I saw the end points moving with different pressure...So glad I watched this I'll definitely recalibrate them with a lot less pressure, thanks for the teaching us TODAY😉👍

I learned and will continue to view and still can’t wait to learn how to get Crossfire and Erls to work on my Radios ruined one in the process won’t boot up anymore. Thanks for sharing!

thanks om, you saved my days

Thanks Joshua, I didn't know about the 6 position switches!

Thank you sir the tutorial is very useful.

Cheers, I had that throttle problem on my T16… drove me crazy! Also I didn’t know about the flight mode buttons. I learnt something today 😎

Hey Joshua, I learned about this thorough calibration from one of your previous vids.

Great info! Thanks!

I did know u did a calibration before and did also the buttons thank u for the video

Joshua I love you. I bought my tango 2 pro a couple weeks ago and always had problems with calibration. Searched on internet, nothing found. You read my mind xD

I do it correctly on my tx16s... Because I watch your videos and researched EVERYTHING before I bought it. 😂 I also use the 6 position for all my vtx power levels ☺ because of you too!

I didn't know that! But I do, NOW! Thanks, JB!

ThanksJB you showed me the solution to my tango 2. I have always had a problem getting the calibration straight.

Good tutorial. Tango 2 single sensor gimbals caught me by surprise too. Especially throttle stick - managed to finish calibration at 9th time only. And still yaw endpoints skew by -7 at zero throttle and at -3 at full throttle. I probably will recalibrate throttle stick once more.

Didn’t know about six position switch. Thx JB!

Much appreciated JB!

You are correct sir, I didn't see the 6 position (Radiomaster) as a pot, but more as just buttons similar to all the menu buttons or the trim buttons that you don't calibrate. Knowledge is POWER! GI JOOEEEEEEE

You cover this is in parts on previous videos but it was a good idea to compile this info into one video. 👍

Didn't know about the 6 pos... TY! :)

way to keep us all straightened out. ...time and time again!!

Yep I saw that and was supersized since they are buttons, great video thanks

I didn't know that. That was just awesome.

Man j thought I had my tango 2 as good as I could get it but this really helped!! Thank you Bardwell 👏🏻

@Mikebfpv

2 жыл бұрын

Came here to see all the tango 2 comments! 🤣🤣

I did not know that! Thanks!!!

I knew about all but the last one. 👍 Learnt something

Big thanks! Its helps me

Finally got rid of that annoying message! Thanks Joshua, I learned something today!

I had same issue with TX16S. I couldn't understand why this was happening... I have done calibration a lot. I have moved stick down strongly every time. I understand that i was doing wrong when I watched your video. Thank you so much...

I didn’t know on the TX16S. Thanks Joshua

Thanks, you save my day !!!

Thank you for this! I get throttle and switch warning lol, just kinda ignored it till now :)

JB told us about the throttle and six position when he first got a T16S and we NEVER ignore what JB says. 😁

Thanks. One more experiense done. My tango perfect tuned))))

Simply said, thank you 😊

I don't have a radiomaster but as soon as you mentioned most people are probably missing something, I knew what it was. I'm pretty sure I calibrated all my pots when I switched to opentx, but now I want to do it again.

Thank you for this Joshua this is just been a little aggravating for my ADHD

I didn't know that, thank you !

that was useful, thank you

you gave it away in the video about those gimbals, So, yes I knew. Thanks to you.

Wow, after taking another look I was actually only hitting 98.8 on my right roll, probably from heavy thumbing my calibration. Thanks 🙏, and that’s with a Taranis with hall gimbals.

Ah! I actually figured it out about the force on the Tango2. Great that you confirmed it as I felt a bit alone 😀 That said I always have the upper limit of my throttle that is 'unstable'. It's not affecting my mid throttle so not important.

I didn't know the proper way to calibrate, but in my defense I'm new to this. I now know the proper way to calibrate my Radiomaster TX16S, which could also be known as the Joshua Bardwell Method! Thanks for teaching me stuff!

Thank you. I did not know.

Got me when installing the rotary 6 pos switch. Moved the switch too fast. So I just didn’t use it. Looking at getting tx16s and found out enough info that I have one on order. Saw enough calibrattion vids and finally figured it out. Now working great. Was Taranis x9d plus. Thank you

Ran into this when doing Ardupilot. I don't think that so many people don't know this.

I didn't know that, Thank You

wow man ! its real ! tanks bro.

Thank you I'm waiting for pyro drone to stock up on the Tango 2

So I just bought a Radiomaster TX16S a few days ago. Was excited to try it out with liftoff and tried to calibrate and do rates and still was getting weird movements and even without touching the controller the quad inside the sim was accelerating of all a sudden and lifting itself from one of the sides. With this video I just fixed all those problems, now I even have better control over the quad. Thanks!!!

Good video 👍