What an awesome kid. Making do with what he has. Someone send him a big bore kit.

@fish_R_stinky69

Жыл бұрын

You are a kid.

@ethanskinner2205

Жыл бұрын

@@fish_R_stinky69ok

@fish_R_stinky69

Жыл бұрын

@@ethanskinner2205 Check out my quad if you like this one.

@fish_R_stinky69

Жыл бұрын

@@ethanskinner2205 I hollowed out the muffler on my quad and I posted content of how to delete the cat.

@fish_R_stinky69

Жыл бұрын

@@ethanskinner2205 I also got Fortnite content.

Right or wrong on what you're doing, It is fantasitc you are doing anything at all with anything that has a motor. You are a young man and I think it is great that you(and other youngsters)are working on these. There are adults that couldn't even tell you how to start one let alone try and work on them or do any mods. Don't let the "adult" critics stop you or get at you...Keep it up and keep these videos coming!

The screws plugging your muffler is so it meets California emission standards. Thank you young man it was very informative.

@t4thfavor1212

2 жыл бұрын

The screws hold on the spark arrester which is mandatory equipment almost everywhere.

Best I watched, AMAZING!!!!!

Good for you buddy, keep rocking

thank you man this made my four wheeler so much faster it really helped

@talhaHaHaHa

2 жыл бұрын

What did you did?

@Zackmiranda2324

2 жыл бұрын

@@talhaHaHaHa there’s like a restriction thing in the exhaust its like a thing on there that u can take off its grey if u take it out there will be a hole in the exhaust but it makes it so much faster it opens up the exhaust more idk if they all have it but it was like a grey restriction thing that i unbolted then it went like 20 mph faster 😂

That’s crazy to see an atv like that because that’s the atv that got me into atving when I was 9 been riding ever since but not that atv any more ran it until the compression was so low that it couldn’t start 😂🤣🤣

Good job kid. Im proud of you.

Good video

Thank you bud

That thing has a catalytic converter to near the engine. That's what that little expansion thing is on the pipe. If you take that off it'll have even way more power.

Great job learning at an early age the emissions garbage is just that, garbage.

Nice one some good fixes I'll be trying on me daughters quad lol, did it ever effect the piston or anything mate

thanks bro

Great Video me and my wife just bought two 125cc quads and we are modding ours to race each other.

@hectorsanchez2146

3 жыл бұрын

Do you recommend this brand of quad to buy am trying to buy one for my son

@2wheelfamily493

3 жыл бұрын

@@hectorsanchez2146 yes they are great ATVs

@hectorsanchez2146

3 жыл бұрын

2 WHEEL FAMILY thank you so much

@luisjg4182

3 жыл бұрын

Do you know what the top speed is on these?

@2wheelfamily493

3 жыл бұрын

@@luisjg4182 around 30 to 35mph

Good video very helpful

You need to plug the crankcase breather hose that you cut. It needs to be plugged on the crankcase AND the filter. You can drop some silicone into it or a vacuum hose cap, but definitely plug it.

@patrioticbastard5935

Жыл бұрын

Plug the crank case and you'll end up pushing oil around the rings.. when the piston goes down, the air in the case needs a place to go.. best idea is put a small air filter or a pcv valve on it so it's got a one way outlet

@williesmith8326

2 ай бұрын

Definitely don't plug the crankcase vent tube put a filter/pcv valve on it or lengthen the hose at least to under the seat and make an upside down u and zip tie it. Similar to what they do for a vehicle differential and transmission vent. You do need to either plug off the port on the filter or put a screen or some type of filter on it to filter out that incoming air so you don't clog your carb

Whygostock has many upgrade parts and they have the largest selection of sprockets for the Chinese made ATVs.

@adriancorpus862

2 жыл бұрын

Is that like a site or sum ?

I can't believe the pair valve would add any power by removing it. It just allows air into the exhaust to burn unburned fuel when you close the throttle.

@natewj1077

4 жыл бұрын

sorry for the late reply, It's because at this time it still had the "catalytic converter" in it, and the stock muffler which is SUPER restrictive. So by removing the pair valve it allowed the exhaust to flow out much easier and quicker... this way the engine wouldn't have to force ALL of the exhaust through the restrictions.

Straight piping causing a burnt engine is half true. IF you don't retune the air to fuel ratio it will cook your engine alive. IF you do tune it, it will have no bad side effects and actually really bump up the power and low end torque.

Good info video. I've been looking for ways to make my boys quads preform a little better.

@anythingwithanengine6091

5 жыл бұрын

Thanks man I would also recommend rear wheel spacers and protaper handle bars

@tsvandyke

4 жыл бұрын

an easy swap is to replace the carburator ( 20 minutes ... $10 on Amazon ) ... a PZ-19 is stock ( 19 mm opening ) ... & replace it with a PZ-22 ( 22 mm opening - allowing more air & gas to enter the engine. ) ( EXPERT MODE ... replace the Jets ( that regulate the amount of gas) in the PZ-22 to a bigger hole ... imagine a mustang carburator in a honda civic

@tsvandyke

4 жыл бұрын

change to a DC powered CDI - the AC powered CDI are dependant on how fast the ' generotor' is spinning for the spark ... dc CDI pulls from the battery; which is charged from the 'generator'/

@tsvandyke

4 жыл бұрын

Take apart the existing carbrator & reset the throttle cable on the control pin. if you shorten the cable, the pin is raised ; allowing more gas in.

Couple things. Good job for trying to do what you can to get more power out of what you have. But…. The screen on the back of the muffler is so you don’t catch dry grass fields on fire. I’ve seen it happen first hand. That screen is called a spark arrester for a reason. Secondly. The tube coming into the back of the filter is for pulling crank case pressure out of the motor. It actually helps make power. And by taking it off and letting unfiltered air in, it will destroy your motor way faster.

@moldynugget8290

11 ай бұрын

Youde be surprised how tough they are, mines been like that for a long time now, it’s been just sitting for years and I’ve been driving it around and it’s been workin, a lot of times no air filter at all haha the engine is surprisingly tough, I have friends that have abused them so bad but the engine somehow survives

I found your video because my tailpipe broke at the muffler weld. I need a new exhaust system. What did you change to and where did you get it ? TY

@anythingwithanengine6091

4 жыл бұрын

Hey there, sorry for the late reply, in my personal opinion, I say take the stock muffler off it is SUPER restrictive. After this video we removed the stock muffler, and stock "catalytic converter" with some pipe we had lying around.

@coldborexx

4 жыл бұрын

@@anythingwithanengine6091 I braced up the straight pipe and can't believe how much better it runs. I also re-geared it to a 12 in the front and a 49 in the rear.. It really gets off the line now..

Wise men say no replacement for displacement.

@Shrined

2 жыл бұрын

Say that to all the BMW’s and Supra’s.

i put a 3 inch exaust tip in place of my mufler and i rebuilt the carb put in a new crankcase filter air filter and turned the throttle adjustment on the cable out now i do 25-30 and thats what i have the nerve to go turbo or head and cam is next

When you pulled the hose from the air filter to the crank casing... did anything negative come of that? Mine broke by accident. It drives good with it off so far..

@anythingwithanengine6091

5 жыл бұрын

All of the old Honda atc just ran it into the atmosphere, but new regulations had it ran back into the engine.... So it's not going to hurt it, just as long as water doesn't fill up your crank case👌

@scotteller1751

5 жыл бұрын

Thanks man!

@alexandercabral1396

4 жыл бұрын

If you keep the stock air filter with a hole in it it can clog your carb.

@MattC78

3 ай бұрын

@@alexandercabral1396 I put a K&N filter on my mini jeep.Those air filters that come with the ATV or new carb are made very cheap and suck dust bad.

Dude forgot about adjusting the throttle cable piece in the carb helps big time more than any of these

@kaseyjohns5169

2 жыл бұрын

How do you do that

@diangelic1

2 жыл бұрын

@@kaseyjohns5169 It's an adjustment in the carb, although I'm not sure if these taotaos have it

Hey I have a 110cc and it is one down for forward up one is neutral and one more up is reverse. When it's in forward the clutch slips but in reverse it doesn't slip can anyone help me on how to fix or do I need to replace

Plug the hose on the air filter or the dirt can go straight into the carburetor and not throw the air cleaner.

@anythingwithanengine6091

4 жыл бұрын

We threaded a small bolt into it

@BudgetBuilds1130

4 жыл бұрын

Yes

Don't remove the CCV, it's letting unfiltered air into the carb, and also letting unfiltered air into the crank case.

@t4thfavor1212

2 жыл бұрын

@relese_thebeast72 no, it’s on the carb and goes to the crank case (bottom side of the motor ) it lets out pressure that builds up in the space below the piston. So it acts like an air pump and has no filter on it.

hey are the lights on this thin powerd ac or dc and how do u check anyone know let me know please

tighten the brake light bolts with lock tight

@madhousebaby

2 жыл бұрын

Lock tight everything every time I go out lol shit always comes loos 😄

Has it hurt the motor

Take off the whole muffler like a man!

The best boost you can do for them is run them on non ethanol gas. They dont back fire pot or sputter they dont miss fire... they fire up 100times better and for sure more responsive.... Oh yea it wont fun up the carburetor it has 3 year self life unlike normal gas that has a 2 month shelf life.

@KERNFUZED

5 жыл бұрын

Check head studs there always outa tourque..!

@KERNFUZED

5 жыл бұрын

Take a Dremmel with a Ball carbide tip and . In the INTAKE dimple it everwere inside ya can like golfball...But port match it first OPEN the HOle there all Wonky blockin path...N if ya want get rid choke butterfly id did all that n the inner weld on the Exhast pipe was half Filled with Weld CHECK IT.... only thing ddint do get rid that stupid pulse thing

@anythingwithanengine6091

5 жыл бұрын

Yup some recreational gas is the best to burn in them, ethanol free 92 octane

@KERNFUZED

5 жыл бұрын

@@anythingwithanengine6091 KLOTZ ADDITIVE MINE LOVED

@calebproductions5970

4 жыл бұрын

Good tip.i put it in my atc 110cc and ford truck.non ethanol is one of the best things you can do.people worry so much about mods , they forget about the fuel.

If it's not water cooled engine th then undoing your pcv valve will more quickly on an air cooler oil cooled engine will lose its oils viscosity much quicker you need a crankcase breather at least put a breather on the crank case and plug the hole on the intake so air dont go in without passing thru the air filter

So the larger section of pipe right at the air pump is actually like a catalytic converter, I just cut one open because im putting a predator engine on a tao tao 125. Check it out on tiktok, username @beetle_baily

Should have left the filter on the crank case hose your letting dust in you engine

Egr delete is good fore the engine no bad things come from it

Do your torque converter

i have the same one

Hey has it blown after you took out the valve thing off of the exhaust

@samuraiman4141

10 ай бұрын

I’m not very familiar with atv what is that thing

@gunsandhorsepower

10 ай бұрын

@@samuraiman4141 not shure but I since then sold the ATV cause I couldn't get it running right

I have a tao Tao 125cc it struggles to go past like 15 km it’s revs out loud and back fires at full throttle. Don’t know what to do

@brianb5779

3 жыл бұрын

Check your valve adjustment and if that's good check your float drop.

@Ronnie.V.89

3 жыл бұрын

Dirty carb or bad air/fuel mixture, poor fuel quality(supposed to run 91 octane in these) or bad plug. KISS...keep it simple stupid..always start with the cheapest/most logical things first.

@Whitetail101

2 жыл бұрын

Rubber hose under Meath connecting to the exhaust is melting use a bright light

take the bafel out in side that muffler.

If u close the small hole on the exhaust pip where u removed that hose lining thing idk the name of it well like I was saying if u close it off it will make it a lil bit more louder

@darrenchafin007

5 жыл бұрын

It's called a spark resistor

@noahrosado5736

5 жыл бұрын

Chevy Militia05 he’s talking about the hole on the exhaust pipe not exhaust tip

@darrenchafin007

5 жыл бұрын

@@noahrosado5736 that makes sense

@edwardhill1739

4 жыл бұрын

Egr valve

The screws in the exhaust originally were to hold a screen in place. The Screen is missing.

@microfarmers

3 жыл бұрын

That screen is a spark arrestor, without it a backfire can cause a brush fire. I remove mine but redirect the tailpipe up.

Y'all Americans got the taw taw thing we have it here too but it's very rare to find one

If you take the baffel and insulation out of the muffler you will get a big boost in power and it will sound awesome

Mines not hooked up ever but I have the entire vent hose and all still connected

there should still be a filter on the crankcase vent

@logansportpilotrp8174

3 жыл бұрын

why

@torenharris2141

3 жыл бұрын

@@logansportpilotrp8174 to filter the blowby that could have some oil/gas in it

@therealbigfoot3076

2 жыл бұрын

@@torenharris2141 thats what she said

@arberfilms2302

2 жыл бұрын

@@therealbigfoot3076 what are you 5? Lmao

@therealbigfoot3076

2 жыл бұрын

@@arberfilms2302 8

Hey do you recommend buying this quad

@tylat4461

3 жыл бұрын

Not really if you have 1k you should go on Facebook marketplace and find a used one this will be 100x better

top speed?

So did it ever hurt the motor

@anythingwithanengine6091

5 жыл бұрын

Nope 😁

The thing that plugged the exhaust is the spark arrester. Pulling it will up power but also cause a brush fire. A tenth of a horsepower (maybe) vs a couple thousand dollar fine, not worth it to me.

@anythingwithanengine6091

5 жыл бұрын

Not going to start a brush fire unless it's soaked in gas...

@thomasmanning6420

5 жыл бұрын

Yes it will ride it let it get warm then go sit in some tall grass bet it starts a fire

@anythingwithanengine6091

5 жыл бұрын

I'm not so sure you know that flames don't shoot out of an exhaust just sitting there idling, not only that, but the baffle is still in there the bolts do nothing but hold a chrome cover on to make it look more appealing.

@anythingwithanengine6091

5 жыл бұрын

If you feel a true concern I would happily make a video of it sitting in some tall grass. :-\

@carsnracing8200

4 жыл бұрын

@@anythingwithanengine6091 😂

fuck it i straight piped mine and it sounds like a drag car on the strip 😎 goes about 30-40+ mph on the street it’s a 110cc but kicks ass.

@anythingwithanengine6091

4 жыл бұрын

Yeah for being as small as they are, they scoot along pretty well!

Any guy that’s tasked with making something faster: well fuck all the emissions shit first of all.

Plz let me know if those quad last

@Unkowngmr08

7 ай бұрын

i believe so

What is the top speed with the modifications?

@RGD-Repairs

3 жыл бұрын

Nothing... Drilling holes into any exhaust causes a loss of back pressure.. resulting in less power output.. As for the EGR valve, They operate on a diaphram inside that opens at higher revs to recirculate exhaust gases... But only on high revs, So through out the rest of the rev range, it wont do naff all, Therefor, no performance gains... Even at high revs when the EGR valve opens, The performance gain is so minimal, its not even noticeable to a human being... -- For real gains, You'd want to skim the head around 0.10mm for higher compression, and a large lobe camshaft.... Those are REAL gains...

U want to make it faster put a bigger carb and less restrictive muffler on it

@anythingwithanengine6091

4 жыл бұрын

We did do that later but we haven't done an update video...

@justinc9911

4 жыл бұрын

can i use 50cc carb on a 125cc?

@natewj1077

4 жыл бұрын

@@justinc9911 Hi, sorry for the late reply, most chinese atv carburetors are usually the same thing, I would recommend looking down the throat of the carb, and if the diameter of the 50cc carb throat is smaller than the 125cc, I would not recommend it.

@justinc9911

4 жыл бұрын

@@natewj1077 ty

Believe in Jesus Christ and the blood he shed for you and be saved from hell before it’s eternally too late if you haven’t already. May God bless

@donavonmacallister3101

8 ай бұрын

He doesn't exist.

@CD-se5gi

7 ай бұрын

Oh but he does, and he loves you.

@user-ot9sd4gh9j

7 ай бұрын

he is got killed, by jews

@elijahlangston

4 ай бұрын

Amen🙏🙏🙏❤️❤️❤️

@elijahlangston

4 ай бұрын

@@donavonmacallister3101he does exist and he loves you very much so

Bigger carburetor.

I am dizzy tho

Stater

Actually....

take that converter off.

Put the skrews back in the exhaust, the motor needs the back pressure.

@screemingturbo8806

5 жыл бұрын

Your thinking of a 2 stroke

@tebibyte2357

5 жыл бұрын

@@screemingturbo8806 no, look up small engines needing back pressure. Say for instance you use a bigger exhaust on a Honda 4 stroke, you decrease power.

@anythingwithanengine6091

5 жыл бұрын

It's all fine tho, we drill the Jets after this video so more fuel, more air and less restriction in the exhaust. We also changed the muffler to a completely different one.

@tebibyte2357

5 жыл бұрын

@@anythingwithanengine6091 alr sweet.

@georgekershner6626

4 жыл бұрын

Just remove the spark arrester screen

The choke gives it gas 🤦‍♂️

@gregoryhayes885

3 жыл бұрын

The choke on these motors restricts the air inlet. Make sure you know what you're talking about before shaking your head at someone.