Tamiya RC Freightliner Cascadia Build Part 1
Тәжірибелік нұсқаулар және стиль
Building the Tamiya kit of the Freightliner Cascadia Evolution semi truck in 1/14 scale.
Link to Tamiya Trucks: www.tamiyausa.com/shop/radio-...
Triple Guard Grease (diff's): www.ebay.com/itm/Johnson-Evin...
My webstore: hobbyconcepts.net
Facebook: 209619112044...
Пікірлер: 83
Hi , I’ve been avidly following tour vlogs while I try to build a Scania Truck. Thanks to your excellent guides, I have not had too many problems, though the gearbox assembly wasn’t that easy, but I got there in the end. This is my first truck build, so I have not tried to be too ambitious, but watching your contributions I just might go for for the full spec version next time Thanks for your excellent vlogs
SO EXCITED TO SEE THIS BUILD WILL HELP WITH MY GRAND HAULER VERY WELL EXPLAINED THANK YOU SO MUCH
I love these build videos, thank you for posting them!! Subscribed!
Box is work of art!
Fantastic job! Considering this build too.
Ahhhhhhh, soooooo satisfying to watch you work!!!! I could watch your videos all day long......honest!!! I feel so ashamed that my King Hauler is still in its shipping box. Your inspirational videos have really motivated me to get it done. But, one model at a time, I'm waiting on the 1/14 fifth wheel dolly axle for my converted box to flatbed trailer so my HEMTT will have something to pull. I replaced the HEMTT tow hook with a 1/10 Axial SCX10 hitch.
Nice job on the video, thanks for sharing. I am just finishing up on the 1/14 Grand Hauler kit.
I'm been learning a lot from your video but I'm not a fan of stick radio but the more I watch the more I'm thinking about buying a stick remote
I like this video.. Clear and informative Thank u..
Wow My Favorite Truck
youi8 got me hooked on rc truckin. clad i subbed. great build videos and very east to follow for a newbie. thank you
Wow this is awesome, love how you illustrate your videos, new subscriber, I love build videos with rc's. If I had the money I would be building kits like these too
Love to see sleeper builds how to exstending the cab / sleeper
I subscribed I have got to see more videos on this truck and your finished product
@HobbyconceptsLLC
5 жыл бұрын
Thank you! I do have lots more coming.
jolis tutos merci
I sure wish I had the patience to do that kind of stuff.
New suscriber; I like your method of showing us important stuff. I have the Tamiya Grandhauler on my RC bucket list. Keep up the good work!
@HobbyconceptsLLC
5 жыл бұрын
Thank you. I plan on doing lots more!
@sadro01111970
5 жыл бұрын
Where can i get that centering devise?
excellent video, thanks for sharing what kind of servos you recommend for these trucks Thank you!!
@HobbyconceptsLLC
5 жыл бұрын
I have found any standard size servos will work well, nothing special needed.
May I ask what servos you use or recommend on these trucks?
Actually, that muffin pan idea would be great for other projects, computers, actual cars, etc.
@tonyromano6220
3 жыл бұрын
Unless one drops it....... I use clear plastic “tackle” boxes.
Nice videos. Where do you get the bearings from. I see the point that they would be more useful than bushings...
@HobbyconceptsLLC
5 жыл бұрын
I get them on eBay. Just search for a bearing kit for the semi trucks.
Hi Bob really like your how to videos, I have a question, What servos do I need for the King Hauler black edition ?
@HobbyconceptsLLC
3 жыл бұрын
hobbyconcepts.net/products/1-14-rc-steering-shift-servos-metal-gear-for-tamiya-king-hauler-cascadia?_pos=5&_sid=ef55109db&_ss=r
Say Bob can you use a different suspension on the rear ?
Love the video... thanking about getting me one.whats the price if I order the truck and the sound kit in lights.?
@HobbyconceptsLLC
4 жыл бұрын
Check eBay but is pretty easy to wrap up a grand or more in one.
hiya again. can you tell me what else i need to get from youre store to complete the cascadia build? i plan on buying the truck kit and the mfc 01 unit in a few weeks. what else do i need to complete 1.e.servos, transmitter, rx and the like. trhanks again and how was the vacation lol? please send link for your store also thanks
@HobbyconceptsLLC
4 жыл бұрын
Michael, You need a transmitter/receiver, 2 servos, 2 servo extensions and a ball bearing set. Contact me at jacobsenra@hotmail.com and I can fix you up.
I wish tamiya would only include the hardware and tools necessary for each step in the bags with the parts for that step! The way Team Associated does.
@HobbyconceptsLLC
5 жыл бұрын
On the new kits they do it tat way, but the King Hauler has been around a long time so they still do it the old way. Still is a great selling kit for Tamiya.
For a cost would you build one of it was bought?
Love your videos👌👍🤙 question. So no grease on rear drive shafts?
@HobbyconceptsLLC
4 жыл бұрын
I am not sure what shafts you are referring to but if it is the driveshafts' (propeller shaft) they should have a dab of grease on each end. If the axle shafts no grease is required if using ball bearings. If you use the sintered bronze bearings from the kit then they do need to be greased.
@johnmiller4553
4 жыл бұрын
Time 26:56. Rear double short shaft between 2 rears. Should input grease in the diff cups / shaft ball ? or no? Thank you again
do you have a Description for the 2 servo`s you juse from spektrum ?
@HobbyconceptsLLC
4 жыл бұрын
Use these: hobbyconcepts.net/collections/radio-gear/products/1-14-rc-steering-shift-servos-metal-gear-for-tamiya-king-hauler-cascadia
I wish they still offered this kit, or could find one un built still.
I have one but it's the smaller one to that and the same color too but I to it in a dump truck I take the sleeper off
Can you use a Flyski FS 16 radio for the up grade of the multi function control unit ?
@HobbyconceptsLLC
3 жыл бұрын
Yes, sure can.
@jerryebner159
3 жыл бұрын
@@HobbyconceptsLLC thanks
How long is a night hauler chasie?
It will be great if they come out with a Freightliner Argosy.
@Phan-Xu
5 жыл бұрын
@@rlm5875 I mean the model truck. Lol.
Hello bob I like your truck builds you do keep doing these video's....I have the the freightliner Cascadia truck it missing some parts I need do you know any 3d printing sites or business that can print parts I need.....
@HobbyconceptsLLC
2 жыл бұрын
Cascadia parts are fast becoming very hard to get since it was discontinued. I do not know of any great source of parts.
How much is the truck ready to drive ken you tell me please
Where can I buy this truck does anybody know? Thank you
Hey!- I like your Muffin Tin organizer idea....mind if I use it?
@HobbyconceptsLLC
4 жыл бұрын
Definitely use it!
Should I do a king hauler for my first ever rc build
@HobbyconceptsLLC
5 жыл бұрын
I do not know why not. The King Hauler has a lot of parts but Tamiya's instructions are excellent and it goes together perfectly. I would built it without lights or sound to start with. You can always add them later.
@ryanreynolds2845
5 жыл бұрын
Hobbyconcepts-LLC thank you for your help I was thinking no lights or sound you are really inspiring me to try it
@HobbyconceptsLLC
5 жыл бұрын
I am going to do a King Hauler quick build video in the next week or so.
@ryanreynolds2845
5 жыл бұрын
Hobbyconcepts-LLC thanks for your help
are you going to be doing other haulers as well
@HobbyconceptsLLC
4 жыл бұрын
Yes! King Hauler Dump Truck coming up next.
pity I can't find this truck in the link. Nor can I find an Argosy anywhere... except for the real thing in South Africa: can get as many as I want.
@HobbyconceptsLLC
3 жыл бұрын
Tamiya has discontinued this truck. I did see some on eBay...
@dugwolfe7192
3 жыл бұрын
@@HobbyconceptsLLC Wicked! Thanks, I'll take a look. Wish ma luck:D
Is this for advanced people or can a beginner do this?
@HobbyconceptsLLC
5 жыл бұрын
Anyone can build a Tamiya kit. Their instructions are great, just follow along and pretty soon you are all done. I should have a new King Hauler easy build video up soon.
It is too bad they discontinued this truck. I my opinion it was one of the nicest trucks they had.
@HobbyconceptsLLC
Жыл бұрын
Yes, I agree. I think it was a licensing issue.
@Doug_Morgan
Жыл бұрын
@@HobbyconceptsLLC It is too bad companies have to be like that. It's a toy but they have to make money off of everything.
Do anyone still sells this truck
@HobbyconceptsLLC
2 жыл бұрын
Been discontinued by Tamiya.
I drive this same truck only mine is red (not a fan of red)
What? Tamiya has Alan head Screws?
@HobbyconceptsLLC
4 жыл бұрын
Generally they do not.
Hi there how much would it cost me for you to build me a truck and send it to me I live in Queensland in Australia
As I get ready to do another, a Cascadia on commission, my only thought is why do you use the only poor part on the kits? Yup those awful plastic wheels. As this kit, and MFC, radio, with paint, is almost $1000.00 a set of alloy wheels is $80.00 shipped in the USA should be a no brainer. Great job as usual!
Hey! You changed watches in mid-video. Is that allowed? Ha!
@HobbyconceptsLLC
5 жыл бұрын
HA! Costco had the Apple watch on sale and I could not resist!! Thank you for watching!
tires
move your hand cant see
Imynmhussain