Tamiya 1/14 R/C King Hauler Painting and Detailing.
Тәжірибелік нұсқаулар және стиль
Painting and detailing tips for Tamiya King Hauler semi trucks.
My contact email: jacobsenra@hotmail.com
email questions welcomed!
My webstore: hobbyconcepts.net
My eBay store: www.ebay.com/str/hobbyconcepts
1/14 Tamiya Truck Open Studio
(Tamiya Truck Facebook Group sponsored by Hobbyconcepts)
groups/64871...
/ rcps-scale-models-and-...
Пікірлер: 141
I’ve used the Mica Red, but what I did after primer is add a layer of Tamiya Gold, it warms the red up. Using silver would “cool” the red somewhat.
Wow just beautiful, really love the king hauler . I'll be watching for more. Outstanding work in my book .
Excellent video! Final product looked really good. Like you mentioned - little details make all the difference.
Bob you are a master painter I’ve watched so many of your videos I just love it. Now I’m just an old school to me a guys matter fact my first RC car was it to me and I just love it they do so well and thank you so much for these videos
Great video. I appreciate all the painting tips and what paint to really go with. I'm getting ready to paint a few models. Good job on all these.
Rigs look fantabulous ! Thank you for this series . Didn’t start mine yet but I’ll join Facebook Group to show progress Thanks Bob
Those turned great!
The quality is in the detailing! Looking great!
Great Video with some super tips, thank you for posting
Looks great!
They are both really good looking trucks.
Great video! Super clean work!
You do awesome work sir, The dump truck is beautiful. I subscribed yesterday, looking forward to many more great videos. Thank you for sharing. Great job.
Love the video. Job well done on the painting
wow bob nice job on the paint i like them both
Love the Red.. great video..you do some great work..
very nice all those small thing make all the difference.sweet work
Quality craftsmanship
MOST EXCELLENT FINE WORK SIR 🤙🤙🤙🤙🤙
what an amazing job
Saw these on the timeline, jus came to drop a 👍 👍
Superb work
Always so interesting and useful.
Very awesome man
Good Work !!
Great job
Thanks for your video im building a King hauler soon cheers from Australia
Fantastic job, Bob! Every time I watch one of your videos, I learn little tip/tricks that I can use to make future builds really pop.
very special congratulations
Beautiful work, Bob!! 💯👋👋👋👋👋👋 I always appreciate the level of Detail that few of us bother with. The Panel line trim... I'm certain, stands out in person. I just got some Molotow Chrome Paint Pens, I'll be trying it on things like the Door Pulls and Sleeper Latches. I tried something.... The Ruf Lights, I actually sanded the mold seams and Sprue nubs smooth. Then I went over it with the Molotow Pen... It blends nearly perfectly!! It actually looks like CHROME! 👍👍😎
@CarminesRCTipsandTricks
3 жыл бұрын
BTW, GREAT job on the Dump Bucket!!! That really looks fantastic!
Hi Bob. I just watched this video...nice work. I do want to compliment you on your communication. I see you actively respond to viewers and interested people. Often KZread hosts do not take the time to respond/reply to their subscribers questions so well done to you and once again for doing so..... nice work on the trucks. Mark
@HobbyconceptsLLC
2 жыл бұрын
Thank You! Will keep on doing it!
Nice
Awesome work. Your style is so relaxing. Thanks for sharing your talents with us. Stay safe. RCUL8R
nice work I like using bare metal foil on the door handles and trim.
@HobbyconceptsLLC
4 жыл бұрын
I love bare metal foil also. I use it quite a bit.
Why didn't you do the panel lines before the clear coat? That's how I've done my airplanes. Thank you for your videos, they have helped me many times!
cool beauty!
If you want to hide the marks in the chrome from clipping them off the sprue just give them a dab with a silver paint pen. It's almost, but not quite, chrome. It does hide the small sprue marks very well though.
@hobbycow5346
Жыл бұрын
Have you ever tried Molotow Chrome pens? They are fantastic! Best chrome you can get out of a pen, and they come in 1mm, 2mm and 4mm tips. if you haven’t tried them, get a 1 and 2mm tip. When you touch up clipped parts, you can’t see where you clipped. They are also great for window trim and even chrome accents on wheels, etc.
Very well explained how to lace Thank you very much for this video you have helped me a lot please open branches how you lace and what changes over time. How did you build the exhaust air box that is super? Greetings from Germany
I scraped the chrome off on the air cleaners with an exacto knife. But I had a King Hauler, Black, so the black plastic look good raw.
Is there a type of tape I can use to use a guide so I can just paint whatever I need to do without messing up the ready of my paint job? Because I do not have the steady easy hand for free painting.
Does polishing and waxing make the truck feel smooth to the touch? I just primed mine and it feels rough.
the COPIC Multiliner Pen you used What was the colour and size i am building a Mercedes Benz Actos 1561 my first Tamiya and learning a lot Thanks
Great information. It's amazing how some detailing and proper paint job can make the trucks look much better and real. How long do one need to let the paint dry before useing a product like X2.0 ?
@HobbyconceptsLLC
3 жыл бұрын
I let it dry a few days.
how much was everything to build the single cable dump truck?? how much would you charge?
Hey Bob how did you hold down the 5th wheel ?
Another great video. Did you complete the dump truck with the smoke unit?
@HobbyconceptsLLC
4 жыл бұрын
Part 4 of that coming soon.
Super video. I have used Tamiya fine spray primer and Tamiya TS color spray paints on scale models, and I tend to end up with some "grain" in the finish -- not a glassy smoot finish. Does the Tamiya clear help to "level" the finish ? I noticed in the video you didn't do any wet sanding of the primer coat before color. Or do you rely completely on the polishing to smooth the finish ?
@HobbyconceptsLLC
3 жыл бұрын
Usually I only work on the finished paint but sometimes I do wet sand the primer with 2000grit. Depends on how smooth it goes on.
What if you did the clear coat after detailing. That would save the ink/paint of the details right.
Hi wow pretty awesome paint job. Just one question, is the dump truck the same chassis as the king hauler just with a modified cab and no fifth wheel?
@HobbyconceptsLLC
4 жыл бұрын
Yes, the dump truck is a standard length King Hauler with the ab cut down. I have videos on how to cut down the cab and building the dump truck so check them out!
Hi Bob. I have finally received my 770S 6x4 kit and have primed and painted all the TS-58 parts. I am now looking at the semi gloss black parts like front grille and mirrors wipers etc. Should these parts be primed before the semi gloss black paint? 3 years old and this video is still great Thanks for your help Ray
@HobbyconceptsLLC
Жыл бұрын
I generally do not prime the black parts that I am painting black.
Do you wash the parts with dish soap before primer goes on?
@HobbyconceptsLLC
2 жыл бұрын
Sometimes I do but not always. Does not seem to make a difference.
Great ideea with the multiliner to outline the panels.., but what color did you use for this trucks.!?
@HobbyconceptsLLC
4 жыл бұрын
The colors are noted in the video.
Great video! Got a question? I am painting with Tamiya gloss black TS paint, should I use the TS13 gloss clear over the already gloss black? And if so do you have to wait for the paint to completely cure before adding the clear?
@HobbyconceptsLLC
2 жыл бұрын
I use gloss on all mine. I just normally wait 10-15 minutes, or if you don't do it then wait till really dry like a day or two.
@RcDungeon
2 жыл бұрын
@@HobbyconceptsLLC ok thank you so much you have a new sub I dig your channel
Another great video Bob. Is the paint booth one you made or one you can buy. Thanks
@HobbyconceptsLLC
Жыл бұрын
Production booth (2 hooked together).
Really nice tip's on painting and detail.How did you make the exhaust fan paint booth ???
@HobbyconceptsLLC
4 жыл бұрын
It's a pre-made booth. I got it on eBay.
I'd like to now if you got the fs-st8 on the grand hauler can you show me how to use this transmitter and reciver please let me know.
@HobbyconceptsLLC
Жыл бұрын
I plan on an FS-ST8 programming video soon.
Love your videos.Thanks for the detailed information. Do you paint the interior at the same tie as the exterior, or do you mask off the exterior and then paint the interior.
@HobbyconceptsLLC
Жыл бұрын
I generally just spray the interior with a light coat of paint and no clear coat. Hard to see inside in a finished model.
@williamkorn9872
Жыл бұрын
@@HobbyconceptsLLC Thanks Bob!
Hi Bob. This is a great video. I have a question about the 0.1 fine line pen. Let's get started 😂. Would that be better between the paint and the clear gloss coats? It seems as if it would get wiped away easily. Thanks. Ray
@HobbyconceptsLLC
Жыл бұрын
I usually do it last. If it fades you can just hit it again but I also see no reason why you could not do it before clear coat.
Hi Bob, thanks for another excellent video. I’ve just painted my Globe Liner body, but have not yet painted the clear coat. Question: Do you polish and then do clear coat? Or do you paint clear coat over paint and then polish? Thanks
@HobbyconceptsLLC
3 жыл бұрын
Usually I try not to but you sure can.
@hobbycow5346
Жыл бұрын
My experience is not to polish before the clearcoat for these reasons: 1) The polish introduces chemicals that that might cause issues with the clearcoat, like adhesion problems and fish-eyes. 2) Polishing can make the surface too slick for clearcoat to grab. Best thing to do is lightly wetsand with 2000 grit or even 3000 grit to knock off any nibs or trash in the paint job, then clearcoat, and do all your polishing at the end. If painting metallics, avoid wetsanding before clearcoat. Sanding directly on metallics can change the tone and color.
Does the Super Clean remove spray paint as well, like if I’m bored my hauler paint job and soaked it will it go to bare plastic like the chrome bits? Love the videos keep them coming
@HobbyconceptsLLC
4 жыл бұрын
I have not tried not sure. Brake fluid does though.
@thedonjeezy1
4 жыл бұрын
Doesn’t damage the plastic?
Bob, Any videos that show any 2 tone or custom paint? Flames or pin striping etc ..
@HobbyconceptsLLC
2 жыл бұрын
This video shows how I mask and paint stripes: kzread.info/dash/bejne/lYWgk5ikccTHntI.html
Hello i have a question do you soak the chrome parts before or after you paint them?
@HobbyconceptsLLC
4 жыл бұрын
You need to remove the chrome before painting. Soak them overnight in Super Clean. You can get it at Walmart - comes in a purple bottle. This removes the chrome so paint sticks.
Hi Bob, Great job!! What sort of coverage do you get with the 100ml Tamiya Paints? In other words how may cans of pint do you use for a King Hauler body? Thanks.
@HobbyconceptsLLC
3 жыл бұрын
I use 1 can primer, 2 cans color and one can clear on a typical truck.
@johncampbell685
3 жыл бұрын
@@HobbyconceptsLLC Thank you Bob!
Hi, if I don't have a painting station, are 10 minutes between layers enough? I'm painting at home, something improvised
@HobbyconceptsLLC
2 жыл бұрын
Probably. You could always time it a bit longer - 15 or so.
nice video Bob , how many cans of each for the King Hauler with the sleeper ?
@HobbyconceptsLLC
3 жыл бұрын
I usually recommend one can primer, 2 cans color and one can clear.
Hey Bob, when you painted the door handles with the paint brush did you then clear it over the top?
@HobbyconceptsLLC
3 жыл бұрын
I usually do it after I clearcoat.
@Guitars_n_RCs
3 жыл бұрын
@@HobbyconceptsLLC so you then dont clear again over the paint brushing?
Can I build my truck while I wait for the electronics to arrive and add them later. Or is it easier to just wait.
@HobbyconceptsLLC
3 жыл бұрын
Yes, you sure can. You can install the electronics later easily. Best to have the servos and ball bearings when you build - everything else is easy to add later.
@rhugg215
3 жыл бұрын
@@HobbyconceptsLLC Thank you so much for you help.
I seen in youtube the rolloff truck look amazing but there is no info on how and what is needed to make it happen.
@HobbyconceptsLLC
2 жыл бұрын
Always check my video descriptions for more information.
I was wondering if you would make an optimus prime truck in the future.
How much for the blue dump truck
I use PPG base coat & clear coat. Way better results.
What's the paint # for that blue Bob not the globe liner the grand or king I'm not sure what one it is but that blue is a great color
@HobbyconceptsLLC
3 жыл бұрын
That is Tamiya TS-58 Pearl Light Blue.
How much grand hauler red one
nice video Bob as usual , where can I find a dump truck kit
@HobbyconceptsLLC
3 жыл бұрын
There are some toy type dump trucks and Wedico might still make one but still the best way is to just build one using a Tamiya kit and an RCP57 dump bed.
What was the that thing called that you said to buy at hobby lobby liner or something ?
@HobbyconceptsLLC
3 жыл бұрын
Pens for highlighting panel lines.
@jerryebner159
3 жыл бұрын
@@HobbyconceptsLLC Thanks Bob
@jerryebner159
3 жыл бұрын
@@HobbyconceptsLLC do they come in different colors ?
Hey. How many cans do you use on one truck cab. Paint and clear.
@HobbyconceptsLLC
3 жыл бұрын
Usually 2 cans color one can clear.
@RC4X4
3 жыл бұрын
@@HobbyconceptsLLC Thanks! I just need a airbrush station and I'm painting away.
Hi bob how much are you going to want for the dump truck
@HobbyconceptsLLC
4 жыл бұрын
Contact me at jacobsenra@hotmail.com or PM me from the Hobbyconcepts Facebook page.
Two words , Molotov Markers. You will never paint silver details again.
Hey bob how much do you sell a complete truck for
@HobbyconceptsLLC
2 жыл бұрын
Check hobbyconcepts.net for finished trucks.
I’m looking for someone who can custom paint these plastic Tamiya bodies. If anyone knows of anyone or would recommend anyone it would be greatly appreciated.
where can I find a painting booth something like yours ?
@HobbyconceptsLLC
3 жыл бұрын
eBay or Amazon
@jerryebner159
3 жыл бұрын
Thank you Bob
Tamiya do a Black rubber finish paint.
@HobbyconceptsLLC
4 жыл бұрын
They do not have a paint color called rubber. I usually use Nato Black or German Gray.
@tracyscotdatemasch2773
3 жыл бұрын
Testors makes a color called"Rubber"
Hi is the blue dump truck for sale? How much$$$
@HobbyconceptsLLC
4 жыл бұрын
Contact me at jacobsenra@hotmail.com or PM me from the Hobbyconcepts Facebook page.
Can I buy I painted grand hauler cab and fenders from u on ebay
@HobbyconceptsLLC
4 жыл бұрын
Generally not. If I go through the work to paint a cab I usually sell it on a complete truck.
I just found your channel.... AMAZING work!! I bought a Heng Tiger Tank and am just getting into these models.. Do you ever make purposely-designed mundane and ordinary super realistic trucks? In other words, your trucks are so good... they look like they belong on a lot for sale. Brand new. I'd like a model that's more like an everyday, nothing special, very well worn truck. I'd like it to have subtle dents and dings, ugly DOT stickers, grime and caked road sludge in the tires and wheel wells, and a few spots of sloppy graffiti, maybe a busted tail light, no fancy rims... like a truck that a company or driver would have with no concern for anything but bare necessity--nothing there to 'look cool' or nice. Just an everyday worn cargo truck. Not even noticeably worn, either. Subtle. Just worn so it looks like 99% of the trucks that I see pass on the highway. I mean, I hardly ever see a shiny new-looking specimen. They're almost always grimy and well used. I'm sure you can do this. And you'd do it wonderfully. But is that something someone could request custom for you to do? Or do you prefer to stick within a range of design styles, like the trucks in this video? As for the base model of truck... the ones here are fine. I'd just want one very well worn and looking like it's been on the road for the last 20 years, as opposed to showroom new.
I like to buy the truck.
How much for the dump truck 💰👍
@HobbyconceptsLLC
3 жыл бұрын
My email is in the video description.
hi I'm one of your subscribers and I just bought a kit for a grand hauler I do not have any idea how to put it together do you have a video step-by-step for first beginners of putting the tamina truck together
@HobbyconceptsLLC
3 жыл бұрын
this series is the best how to for getting started; kzread.info/dash/bejne/lIas0cyBcdqbeMY.html
Very Out Standing