I like these changes a lot. The steering linkage on my CC-01 drove me CRAZY

@Matteomeier

4 жыл бұрын

Thanks! 👍😊

Thumbs up, Matteo. Hoping you would do a video like this. And here it is 🙂

@Matteomeier

4 жыл бұрын

Thanks to the north! Glad you liked it! 👍😊

what makes tamiya a tamiya is they dont go stupid on the suspension articulation. Its a platform that is fun to use because you need to think a bit more when using it as a crawler

@Matteomeier

3 жыл бұрын

I agree! 👍😊😊

Finally purchased CC02 :) Thank you for always good video!!

@Matteomeier

4 жыл бұрын

Nice! Have fun with your CC-02! 👍😊

Great companion my friend. Something to think about definitely if your looking to buy one of these. Thank you very much. 😎👌🏻👍🏻

@Matteomeier

4 жыл бұрын

Thanks Kingston for your good feedback! 👍😊

Good video and detailed explanation. I love CC01 because its platform is way different and unique. CC02 platform design is similar to most market players, and falls into severe competition, IMO

@Matteomeier

4 жыл бұрын

Thanks Eric! Your opinion is not wrong...

A very useful comparsion video! I also have CC-01 Land Rover Defender which is for my kid and I'm considering CC-02 chassis for myself. I have looked up Axial SCX10 and Traxxas TRX-4 but what I didn't realise is that they are much larger than Tamiya's pair. Prior to getting CC-01 a couple of years ago, I had considered other options such as Traxxas and Axial but Tamiya's commitment to maintaining the same chassis design over the years, without abandoning them, is what swayed me to CC01 for long term parts support etc.

@Matteomeier

4 жыл бұрын

Thank you! 🙏 Yes, here you can see the size differences between CC-01 and TRX-4: kzread.info/dash/bejne/dnxqyrCPpZy3ctI.html

@barnettgs

4 жыл бұрын

@@Matteomeier That is very useful. I can see the wheels poking out etc, that made it look bigger than it is.

Good comparison Matteo, very informative. Enjoyed you video as always👍

@Matteomeier

4 жыл бұрын

Thank you so much Bullgear! Glad to hear that! 👍😊

Thank you for doing this, Matteo. I watched it because I'm wondering whether to buy a CC02, and this video has convinced me to do so.

@Matteomeier

2 жыл бұрын

Glad I could help! Enjoy your CC-02! 👍👍😊

@Del350K4

2 жыл бұрын

@@Matteomeier It arrived recently, from Euro RC in Helsinki.

Another great video, thank you Matteo and a two thumbs up for you.

@Matteomeier

4 жыл бұрын

Thank you! 👍😊

Nice comparison video! I Will miss the departure from IFS on the CCO1. It was a unique feature of that car. Not many off road style rigs out there with IFS at that time. I actually have some metal drivetrain, suspension, and steering components to replace the weaker plastic parts.

@Matteomeier

4 жыл бұрын

Thanks! Maybe Tamiya let both platforms in there line-up. So everyone can choose what he prefer...

Great video! Nice to see the two in comparison :) I like them very much :)

@Matteomeier

4 жыл бұрын

Thanks for your nice feedback! 👍😊

Thanks for a great comparison video my friend!!

@Matteomeier

4 жыл бұрын

Thank you! 👍😊

Great comparison video! Are the wheel base the same? Or is one longer than the other? Thank you!😎

I sure wish I wasn't so hung up on having inner fenders on my crawlers! I know I'm missing out on a lot of cool trucks... damn those inner fenders! I have to figure out how to curb my OCD! My faster RC cars/trucks (VXL-Rustler, Losi Tenacity) do not have inner fenders. Retired life can really suck at times! Can an old dog learn new tricks? I'll be sure to let you know... LoL! I have two RC channels with the bell button mashed. You & Kisuns RC Life. You guys keep it real & I respect that tremendously! Thanks Matteo!

@Matteomeier

4 жыл бұрын

Thanks so much Brian! Verry glad to hear that from you! 👍👍😊😊

Another great video! Thumbs up!

@Matteomeier

4 жыл бұрын

Thank you! 👍👍😊😊

Very true my friend, you point out the pros and cons on these fabulous Tamiya cross country series. I do like this brand new design RC kit, Tamiya item # 58675. even though I don't like the G class in real world size... but this G500 body shell is one of the most detailed rc lexan body set from Tamiya recently. in my opinion, as a Tamiya fan boy(which I am), this kit is nothing else but a nice and pretty scaler to me. and if I want a scaler chassis for now, CC-02 will not be my first choice, because my old super low budget CC-01 can fit this scaler position easily. and again, if I want a crawler...well, all I can say I am still in love with my old CR-01... anyway, thank you for this nice comparison video, well done!!

@Matteomeier

4 жыл бұрын

Thank you for your nice and true feedback! 👍👍😊😊

Some great points mentioned there. Cc-01 still a great car off road, but the cc-02 looks like a better car for tricky terrain and mild crawling. At any sort of speed cc02 is going to get filthy though. You can pick up the landfreeder for about £130, the CC02 is over £200.

My Friend Matteo, you say the CC-01 Chassis needs modifications to work right... This is definitely an understatement!! 😳 To get mine to steer and track properly, needed over $150 in Suspension and Steering mods!!! 😖 But of course you know this. Your earlier Videos are what inspired me how to modify my CC-01 !! Thank you for this. I may never be able to afford a CC-02, but I wish I could. I would replace my two CC-01 Chassis with them... But not to throw the CC01 in the Bin! No, I would Scratchbuild a Dakar Rally Truck Body for it, because the high speed would be a good match. 👍👍 The CC-02 I would Scratchbuild inner Wheelwells, and raise up the links... But I probably won't get that chance. So I admire yours and others. GOOD comparison Video my Friend!! Carmine ✈🚂🚙

@Matteomeier

4 жыл бұрын

Thanks Carmine! Always nice to get fine feedbacks from you my friend! 👍😊

Matteo, your video's are awesome man, I have since been searching for a CC-01 kit. I'll take less steering angle for inner wheel arches any day of the week 🤣each to their own.

@Matteomeier

Жыл бұрын

Thanks! Good luck and have fun! 😊😊

Hi Matteo! Congratulations for all the great content on your channel! I really like your videos! As you have all of the models that I would like like to buy I wanted to ask your opinion on these. The cc01 Land Rover defender 90, the cc01 Toyota fj, or the cc02 Mercedes g500. Which one would you recommend? I’m a beginner so the difficulty on the painting is something I take into consideration. Thank you very much and keep the good work. Kind regards

@Matteomeier

3 жыл бұрын

Thanks for your nice words, I'm glad you like my videos! The painting of all these models have the same difficulty. I would recommend to go with the CC-02. 👍😊

Another great Video Matteo! I have a cc01 that needs a new tub (previous owner chopped it up to put the steering servo at the front). Debating on fixing it or just parting it out. I kind of want a cc02 for the scale appearance!

@Matteomeier

4 жыл бұрын

Thanks! I would replace it by a new one! 👍😊😊

Awesome comparison there, Matteo. Very informative. It would be interesting to see how the CC-02 compares to MST's CMX, considering both are smaller scale chassis with smaller wheels than the larger SCX10 and TRX4. I was thinking about getting the CC-02, but I'd love some fenders for it to complete that scale look.

@Matteomeier

3 жыл бұрын

Thanks again Tomas! This comparison would be useful... maybe sometime I have some time to do this! (This sentence sounds weird to me😂)

@uncletom1971

3 жыл бұрын

Well, there are so many RC models and chassis coming out, one has little time to reflect over older designs. But some designs, and chassis, are timeless and will always come back as Tamiya's re-releases.

Very useful info! Thanks!

A lot of up improvements on the new one. Thanks. 👍🏽🐒🇺🇸

@Matteomeier

4 жыл бұрын

Thanks to you! 👍😊

Nice Explanation. What size of/type of Tires do you have on the CC-02? I was about to say oh, and they improoved the tires, until you mentioned they didnt.

@Matteomeier

4 жыл бұрын

Thanks! The tires are from MST, have nearly the same size but works much better. www.rc-mst.com/product_info.php?class_sn=3&class_sn2=108&sn=2636

Very nice comparison Matteo :) I'm guessing the Hong Kong based RC companies will make some inner fenders and other things for the CC-02 soon

@Matteomeier

4 жыл бұрын

Thanks Aviano! Yes I think also they will make some special parts...👍😊😊

Thanks for the comparison! 👍

@Matteomeier

4 жыл бұрын

Thanks for your Feedback! 👍👍😊😊

Great video, interesting comparison between the 01 and 02

@Matteomeier

3 жыл бұрын

Thank you! 😊

Hallo Matteo; wieder einmal ein tolles + informatives Video. Frage: Passt die Landrover Defender D90 Karo auch auf das CC-02 Chassis?

@Matteomeier

4 жыл бұрын

Vielen dank! Direkt passt sie nicht, man müsste den Radstand anpassen. Das sollte aber einfach möglich sein, werde mich nächstens der Thematik annehmen.

@lr2648

4 жыл бұрын

Super Matteo, ich freue mich schon darauf.

Should be long before tamiya starts releasing this chassis with all there classic crawler bodys?? Can't wait for the landrover.👍🏻 great video again.

@Matteomeier

4 жыл бұрын

Thanks! Sure, they will relesase more cars with this chassis! 😊

As you called the MST CMX the unofficial CC02, I'd love to see a compassion between the CMX/CFX and the CC02

@deusexaethera

4 жыл бұрын

I owned a MST CMX for a couple years. I converted it to a CFX when the option became available. I eventually sold the truck though, because I have a SCX10 II, a Vaterra Ascender, a TRX-4, a TRX-6, an Axial Wraith, and a modified Traxxas Telluride. The CMX/CFX is definitely a better truck than the CC-02, but the small size is an unavoidable disadvantage when driving in the woods. I would consider buying the larger CFX-W, if I didn't already have so many other crawlers, but in reality I've got all the rock crawling options I could ask for already.

@Matteomeier

4 жыл бұрын

Maybe I'll do this, but the problem is I don't have a stock CMX at the moment...

@Matteomeier

4 жыл бұрын

Exactly why I prefer bigger crawlers also!

@P0110X

4 жыл бұрын

I own a MST CFX that started as FJ40 (252mm wheelbase) and while 90x30mm tires look well compared to the size of the car, cannot be easily compared to, for example, a scx10 I/II because those chassis work with 110-120mm tires. I now use my CFX with a FJ Cruiser body (267mm wheelbase) and with 106mm tires obviously performs lots better. I also have a cc01 shelf queen that is already upgraded. I think the cc02 will be a nice option for trailing with short wheelbased projects.

Schön und verständlich erklärte Vor - und Nachteile der beiden Plattformen. Danke dafür. Sind denn die Innenkotflügel so dicht an der Karosserie, dass sie ein wirksames Eindringen von Wasser und Schmutz verhindern?

@Matteomeier

4 жыл бұрын

Vielen Dank! Nein die schliessen nicht so dicht ab, aber das Verschmutzen des Innenlebens wird trozdem deutlich reduziert. 👍👍😊😊

Hallo Matteo, Deine Videos sind großartig! Danke dafür. Eine Frage, die Du sicherlich schon öfter beantwortet hast, kann ich gerade nicht bei Deinen Videos finden: Sperrst Du das Hinterraddifferential bei Deinen CC-01, wie Pajero oder Landfreeder? Wenn ja, wann? Dauerhaft? Viele Grüße aus Berlin Dirk

@Matteomeier

4 жыл бұрын

Hallo Dirk, ja die Hinterachse sperre ich immer dauerhaft. Die Teile dafür sind ja im Bausatz enthalten. Teilweise sperre ich sogar die Vorderachse.

Thank you for good video!

@Matteomeier

2 жыл бұрын

Thanks for watching! 🙏

Very clear and helpful. Ciao Nanni

@Matteomeier

4 жыл бұрын

Thanks Nanni! 👍😊😊

Excellent comparison!

@Matteomeier

4 жыл бұрын

Thanks! 👍😊

very very good idea , thanks a lot

@Matteomeier

4 жыл бұрын

Thanks Kaza! 👍😊

Hello Matteo. I also have both of these trucks. I have both the Tamiya CC01 and also the Tamiya CC02. Tamiya used a lot of plastic parts on the CC02 chassis. I did buy a lot of metal parts for my CC02 Mercedes truck. It did improve the performance of the truck. However, both the CC01 and the CC02 will not be very good rock crawler trucks. They are only a trail truck. I just bought a Vanquish VS4-10pro truck. I have not yet built it. It is very expensive, but it is a rock crawler truck. Have you heard of this truck? This truck appears to have very good instructions and it also has a lot of metal parts too. Maybe you could do a build video on that truck?

@Matteomeier

4 жыл бұрын

Hey Alfred! Yes, it's true. As I said in the video the CC-02 have never the same performance as other Scale Crawlers like the Axial SCX-10 or Traxxas TRX-4. This is mostly because of the smaller size of the CC-02. VS4 is also bigger and so logically has better off-road capabilities. And yes it's very expensive (too much for me...😅😅😅)

My CC01 Pajero just collects dust. I'm probably just going to sell it soon. My modern trail trucks and crawlers get all the use.

Before the design was worked against the impact , now the design is absorb the impact or avoid the impact. As you can see the plastic is more elastic. Still it is a good viedo presentation!

@Matteomeier

4 жыл бұрын

Yes, plastic is soft, good damping material... 👍😊 Thanks!

Looks like these chassis have different wheelbases. I know the CC-01 can be adjusted to short or long wheelbase by changing the attachment position of the rear links. Can the CC-02 be adjusted as well? I am particularly interested to know if the old Jeep Wrangler hard body can fit well on the CC-02 since the rigid axles would be a much better match.

@Matteomeier

4 жыл бұрын

Yes, CC-02 links can also be mounted in two positions to adjust the wheelbase. Will try this in one of my next videos.

Hey Matteo, have you heard for a Channel called KatuRou. They make CC01 chassis handle more realistically than I have ever seen! They do it adding lots of lead in the right places. I can't post the link because for some reason youtube won't let me, but that is the youtube channel name. It looks really good and I think I will try it with my TRX4.

@Matteomeier

3 жыл бұрын

Yes, I know him and allready seen this videos. Of course this is a good way to reach a realistic movement. I also use weight in my cars to improve this, but not in this exessive way. In my opinion this is too much. I think it's important to find a good balance between performance and realstic movement. Because of the phisics a 1:10 scale car car not move like a real one without a big lack of performance. 😊😊

@avipatable

3 жыл бұрын

@@Matteomeier ​ @Matteo's RC Movies yes, I agree, I am sure his cars do not perform very well in some difficult terrain, but it is very nice watching his slo mo videos! I will try and find a happy medium with my TRX 4. I would like the GCM full Defender interior in mine - and that is already some extra weight!

nice Matteo very good comparison

@Matteomeier

4 жыл бұрын

Thanks a lot Michael! 😊😊👍

Biggest departure will be the hard body Jeep and others. Addition to the SAS is on point. Body wise, Tamiya missed a great RC by using lexan. Like axial or horizon. Getting rid of the best parts of RC from over 15 years ago or more is going to hurt the hobby more than we think. When it comes to kits, beadlocks and hard bodies are key. I'll never forget my RTR scx10 with beadlocks. I was sold on that alone. Can't stand the glue, but maybe the tires aren't that great? I'll be selling my ryft tires if anyone wants them

Does de CC02 can works with Pajero model, the same model that create with the CC01 chassis?, is so, is it a better option?

Super like 😀👍

@Matteomeier

4 жыл бұрын

Thank you! 👍😊

Is there a way to mount the Pajero body from the cco1 to the cc02 in the same fashion it was originally mounted?

@Matteomeier

4 жыл бұрын

Not in the same fashion. It can be mounted for sure, but on another way.

I like how he says the Letter V

Does de CC02 can works with Pajero model, the same model that you built with the CC01 chassis?, is so, is it a better option?

@Matteomeier

4 жыл бұрын

Yes, the Pajero can be used with the CC-02 chassis. The body mounting have to be self made, as best with magnetic holders. If it's the better choice for the Pajero depends what you like. In real, the Pajero have independent front suspension, same as the CC-01 chassis...

Great video man! 👍👍👍 I gotta say tamiya’s cco2 Is a bit disappointing! Still all plastic, big hump hanging out of the bottom and solid axle should have been done yrs ago! I’m betting the thing even still has plastic bushing for a rig that cost $200+ I would expect more these days! So they can keep it! Sorry Tamiya but there is tons of better options out there for the same price! At least the cc01 is unique! 😅

@Matteomeier

4 жыл бұрын

Thanks for your good feedback! I understand it completely...

Cc01 front wheel’s wobbling is crazy... can never run in a straight line... but i will not invest any modifications on it. Run it slow and good for taking pictures! D90 looks a lot better than traxx defenders

@Matteomeier

4 жыл бұрын

Thanks for your feedback! 👍😊

Be nice if you compaired the wheelbase and choice of bodies.

@Matteomeier

4 жыл бұрын

Some wheelbase possibilities on the CC-02 will be follow soon...

Geils änglisch, wiä immer😉

@Matteomeier

4 жыл бұрын

Thänks! Sorry für das Mundart- änglisch! 😂😂

I love chanel you friend 😍😍 Nice adventure Nice vidio Good RC adventure Good luck friend

@Matteomeier

4 жыл бұрын

Thanks so much! 👍👍😊😊

Cool video,keep it up, put a like!!!!👍👍👍😉🤘

@Matteomeier

4 жыл бұрын

Thank you! 👍👍😊😊

I built both. Cco2 gives the better performance. But landrover has the nostalgia

@Matteomeier

3 жыл бұрын

Yes, I agree. Best way is to put the Landrover on the CC-02... 👍👍😊

Can the Defender body be purchased separately and fitted to the CC-02?

@Matteomeier

4 жыл бұрын

Yes, and it fits well on the CC02 👍😊

Looking forward to my CC02 Build. I wasn’t a Fan of the CC01.

@Matteomeier

4 жыл бұрын

Yes, enjoy it! 👍👍😊😊

are the cc-02 rims 1.9 inch? If not, what are they?

Und trotzdem mag ich das CC-01 Chassis mehr 😝. Es ist einfach unique. Leiterrahmen kann jeder. Passt die G500 Karo (Radstand)?

@Matteomeier

4 жыл бұрын

Radstände lassen sich ja anpassen, insofern sollte alles passen oder kann passend gemacht werden.

What is the best chassis of the two,cc-01 ore cc-02

Tamiya is kinda late to the party.... in a time where basicallly every crawler has solid axles an improved version of the cc01 with ifs would have caught my attention more so... sorry tamiya,..

@brantleyjoaquin3238

3 жыл бұрын

A tip : you can watch movies on flixzone. Me and my gf have been using it for watching lots of of movies these days.

@bohuxley5050

3 жыл бұрын

@Brantley Joaquin yea, I have been watching on Flixzone} for years myself =)

Isnt it possible to put the springs of the cc2 on the cc1?

@Matteomeier

4 жыл бұрын

No, the springs from the CC-02 are too big for the CC-01

Where did you buy the Defender body?

@Matteomeier

4 жыл бұрын

This is the CC-01 Defender from Tamiya. www.tamiya.com/english/products/58657/index.htm

👍👍👍👍👍 Спасибо

@Matteomeier

4 жыл бұрын

Спасибо за приятный комментарий! 👍👍😊😊

@user-ey3js3td7g

4 жыл бұрын

Matteo's RC Movies предлагаю дружить Странами 😊

It's funny because they are totally different chassis I don't even know why tamiya even called the new one a CC02 because the CC01 has a independent front and the CC02 2 solid axles? Nice showcase Matteo!

@Matteomeier

4 жыл бұрын

Thanks Steve! Yes, some things at Tamiya are a bit hard to understand...🤷‍♂️🤷‍♂️

I kinda wish that Tamiya kept IFS for the CC02, most new and new-ish 4x4s have IFS and it would be a nice for a scale look. I'm not impressed :/

@Matteomeier

3 жыл бұрын

I think is good to have it booth. For older trucks is better to use the rigid axles, and for newer the IFS.

@nobraidps

3 жыл бұрын

@@Matteomeier totally, if tamiya have made 2 versions of cc02 that would have been ace

@SnarkyRC

2 жыл бұрын

Just get an Element RC Enduro. They make some with IFS. I have one of their IFS conversion kits on my SCX10 II.

What tyres do you recommend for cc02 chassis?

@Matteomeier

2 жыл бұрын

The KM Crawler Tire from MST: www.rc-mst.com/product_info.php?class_sn=3&class_sn2=108&sn=2666

@surendransuppiah

2 жыл бұрын

I just fixed my cco2 chassis. Waiting for the carbon steel propeller shaft. Ordered the wrong one.

What tyres did you use please?

@Matteomeier

2 жыл бұрын

Tires from MST: www.rc-mst.com/product_info.php?class_sn=3&class_sn2=108&sn=2636

👍

@Matteomeier

2 жыл бұрын

🙏😊

I see a lot of similarities to the CR-01 chassis.

@Matteomeier

4 жыл бұрын

In my opinion only the 4-link suspension.

Hi, can body d90 installed in cc02 chassis?

@Matteomeier

3 жыл бұрын

Yes, kzread.info/dash/bejne/hHmlms9_hZXgprA.html

I love the chassis, really. But the steering is horrible. The servo just shifts the chassis side to side over the axle. Why on earth didn't they use a panhard bar.

@Matteomeier

3 жыл бұрын

Yes, but important is the propper adjustment of the servo endpoints of the steering. So it works not bad and on the trails there is not a problem. 👍😊

Chasis cc-02 can use at cc 01 pajero ..?

@Matteomeier

Жыл бұрын

Yes

Over all i still prefer the CC-01 model plus those can be ran with faster motors. I feel the CC-02 is only for super slow speeds.

@Matteomeier

4 жыл бұрын

Yes, depends what you prefer more...