You nailed it on point Matt! The Tamiya way - and I love it! Great review!

@scalebuildersguild

4 жыл бұрын

Thank you Matteo! I'm following your build as well!

@davidjones7544

4 жыл бұрын

It's so true, Tamiya is it's own thing and it is a good thing. Always have fun with Tamiya.

As an OG Tamiya kid, you got it spot on. My fleet is mainly Clod Busters, Blackfoots, and Falcons with a few crawlers tossed in. Every single step of a Tamiya build is smiles for miles. Well, except for when you're building a Clod transmission and those E clips go flying. They're not the most durable. Or the fastest. Or the most scale. But we love them anyway. And if you don't understand the appeal, you'd have to build one to get it. I remember the first time I built my own RC from a box of sprues and screws and watched it tear up the back yard. It blew my mind how much better it performed than the Radio Shack RCs I would get for Christmas. I want every kid that's into the hobby to have that same experience of "holy heck, I MADE THAT!"

@t-money561

2 жыл бұрын

Hope you have the e-clip tool! One of the best investments of all time!

You're not a true RC hobbyist if you've never built a Tamiya kit. That's the RC way. lol

Just wait for yeah racing for that sweet blue aluminum hop ups

Very nice. I just got my CC02 and can’t wait to build it

Finally a tamiya ladder frame chassis. Ironically, the new G-Class has the chassis configuration of the cc-01 with independent front suspension.

Tamiya kits have always been a blast to build for me, brings the kid out in me every time:) Good stuff!

Great review. Respectful for what it is, yet honest. Great.

Awesome video as always! That is the imthatguy way!

Always enjoy their builds. The small makeup containers with grease or lock-tight. And the instructions are half the fun!!!

Right on! Nothing wrong with The Tamiya Way for something fun and outside the box.

looks great.... nice work. thanks for sharing

solid review. GJ man GJ Tamiya.

✌🏻😎🏴󠁧󠁢󠁷󠁬󠁳󠁿You done an awesome job on that kit. It was fun in the chat while you was building too. & I Love the paint job. That’s The SBG Way

That’s the Tamiya way needs to be a shirt

@michaellenheiser3157

4 жыл бұрын

pauls1816 or a bumper sticker on the SBG next sticker pack👍

Thanks Matt, Sweet rig. I however ordered a TT-02 WRX Monte Carlo. Can't wait to build it. CC-02 , SWEET!✌️👍

Ladies&gentleman i present to you: that’s the tamiya way performed by Matt🥴👍🏼

Great review!! Just picked one of these up. Having built many Tamiya kits over the past 30+ years, I expect the same precise instructions and superb fit and finish from this model. Tamiya has been a steady presents in the r/c world for over 40 years looong before almost all of these other companies that make trail trucks/rock crawlers were around so I respect Tamiya for their longevity and willingness to get into the solid axle/4-link trail truck game.

@scalebuildersguild

2 жыл бұрын

It's definitely a Tamiya model, through and through!

I built a konghead recently, i love it, i love TAMIYA.

Awwsome video I own a tamiya mf01x and love it been thinking about a cc01 but now omg cc02 gime gime

Great review. Love the looks of the kit. Have an original cc01 and been thinking about this kit. What other bodies would fit this chassis?

Those tamiya tires and wheels fit soo tight!! This is the tamiya way! Lol!😜😜👍👍

Nice job the taymia way has always been cute

Your decal worked really neatly The hardest thing is adding decals. haha

wow Matt! NOT the review i expected! well done. I have been a tamiya fan since im 12 yrs old. love the " new tamiya kit smell"!! anyhow, not a g wagon fan but you made it look good. will the clodbuster body fit???

I love that blue you put on there! Very nice! A hardbody suggestion you say? Does it have to be pre made or can I suggest to you a custom made hard body from styrene? If the latter, may I suggest putting on a mock up of the very first Unimog body style on there? The 411 I think it was called. I think it would look cool on there. Not too many RCers out there with a custom Unimog 411 body on there chassis.

That's one serious crawler;)

Looks amazing Matt! 76 Ford Bronco half cab would be interesting🤔 Even better, a Brat😍

This is the way🤖

Great review. Can't wait to see the body you choose. Are there files for a CJ-7 Renegade? That would be pretty cool. -"Angry" Dave

I’m very sad that they didn’t keep the ifs, but, that’s the tamiya way. I vote Cc01 crv hard body.

@HarmanMotorWorks

2 жыл бұрын

I think it's good they went with dual solid axle for the 02, means that we get an awesome scale solid axle 4x4 chassis with an adjustable wheelbase. Top stuff 💪

Tamiya’s are my favorite to build.

@scalebuildersguild

2 жыл бұрын

I have a lot more Tamiya to come on the channel! Stay tuned!

I was already wondering when we will see the car completed. Can't wait to see other body options popping up. Btw.. First!! 😎

Think I might treat myself to a lil Tamiya kit for Christmas, no 3D printing or sanding, sanding and then more sanding and would be nice to have instructions lol

“That’s the Tamiya’s way” 😆

I got my CC01 with a pajero body almost a year ago & here’s the cc02. I would have waited if I knew they’d be launching the cc02 this year, any way I enjoyed my cc01 build, it was an awesome experience and the painting part for me was the toughest. I’ve been upgrading my cc01 every month and now its turned into one amazing crawler and a trail runner combo thanks to Holmes hobbies motor, I’m having a blast 👻. I’d love it if u put on a Tamiya Defender D90 body on it, don’t know if the wheel base is the same for cc02.

I'm restoring an abused CC02 and all I can hear is your voice saying "This is the way" as I scratch my head during the rebuild.

Ardius Rams! I believe that comment was made during the live stream build video.

There will be a _lot_ of metal hop ups coming out for this chassis in the future. Matt: You need a driver figure. Look at all the cool figures Matteo's RC put in his cars/trucks. Kudos to you detailing the G wagon so beautiful :)

@scalebuildersguild

4 жыл бұрын

I like to build as stock first, then add things later on, like drivers.

Fun looking build!!! It does need a hard body like the jeep cherokee one they make and metal gears I thought it said it had a metal chassis rail I see how they got around that in the video 😐

I think that a UMM jabato body would be awesome 🐗

I think that's why so many people are drawn to Tamiya, because of how unique they are.

Matt, everyone had something to say about the new CC-02... Myself included. 😳 You just summed it up better than ANYONE! 'It's the Tamiya Way" 😊 Looking at it DONE and running, I can now appreciate that the Suspension WORKS! Unlike the CC-01, that just floats and bounces (out of the box anyway). I mentioned the Elephant in the room in your Build Video... 4 Link AND CMS! 😳 No. If the Aftermarket can supply anything - an Axle Mounted Servo would be a Performance adder... Yeah I know, step backwards. But it would be buried so far in the Hood - it WOULDN'T be offensive! 😉 IF you find that the PLASTIC Main Frame Rails aren't an issue, then Metal replacements can wait. And what you said about the Silver Can Motor, I concur. I've never replaced a standard Mabuchi... And I've had a 25t Sport Tuned Motor in 3 Rigs, including a Rally Racer, for over 12 years! The only Aftermarket Motor that has come close, is my Holmes Hobbies 30t Handwound. Carmine ✈🚂🚙

fun little truck. It might be interesting with a Citroen 2cv body

I have a Tamiya Clodbuster shell painted up like the Fall Guy truck on my CC01 will be a logical step to fit it too a CC02. Had to mod the CC01's wheelbase a little but heard the CC02's is adjustable. So find yourself an old Tamiya hard shell is my suggestion!

Nice beginner trail rig!

Tis the Tamiya way

Hehe superb review sir! Thats the tamiya way! Hahaha

I applaud you for trying the CC02, not my cup 'O Joe, but hey. It did look like either the rear axle or the rear body was moving side to side quite a bit. Oh ya, "the Tamiya way" 😂

Lol he said its not as smooth as most crawlers "but thats not tamiyas way" lol😂😂

Matt did you use the Lexan paint on the plastic tire cover and mirrors? Good job looks amazing.

@scalebuildersguild

2 жыл бұрын

I sure did! Thanks for watching!

I've been looking at this truck. For my first Tamiya.. maybe In the upcoming.. looking forward to .. NC MOUNTAINS back yard RC.AND MORE. 🏞

my cc01 fell off a massive cliff n only killed a servo. it bounced almost as high as the cliff it drove off, when it hit the bottom lol. drove it outta there as I couldn't get down to where it was safely managed to get it back to a place I could go inspect it. all it did was kill a cheap servo. I've not used it much since. but it was fun when I did use it. I think I'll resurrect it after watching this....maybe this time ill lock the back axle so it don't roll away so easy near cliffs.

got a blackfoot laying around that I never put on a vehicle. Might the CC02 finally give it some purpose?

I love it nice review does it come with bearings or is it standard Tamiya 😁 bar none Tamiya is my all time favorite brand .if I could only have one RC it would be a clod buster . Lucky for me that's not the case lol I totally agree RC is all about the smiles I've said it for years . So there is no pin hole with a plug in the axle like the cr01? How far down do you have to strip the axle to lock and unlock the diffs ? I think an old Willis Jeep would be awesome on this truck .

@scalebuildersguild

4 жыл бұрын

No bearings are included. Axles should be completely dissembled to swap between locked & unlocked.

Y’all can buy this truck on Asia tees for $250 right now if your looking for one

Hi, I would like to see new Suzuki Jimny body on this chassis. I wish Tamiya would make it.

the body shakes quiet a lot, a good side skid bar will be able to fix that

If you make another one of such nice vids about Tamiya, you might lure me into building one for myself. Which I wouldn't ever do naturally (uninfluenced)

I am guessing since it will take the Hop Up CR01 axle shafts it will accept the stock CR01's too? I have a extra set laying around. Also, anyone have a list of bearing size it takes? Or does it include a set?

First I have to say I'm lying. Second, Great video!

Just wondering CC01 Pajero body can fit on CC02

TRX4 G500 is the shit baby 🔥🔥🔥🔥🔥

@scalebuildersguild

4 жыл бұрын

It's a Shit Baby?! I'm confused.

Build time : body >> chassis. That's the Tamiya way. :)

i love tamiyas, my first ever rc was a TL01. iv recently replaced it after yeeears with a TT02. atm im debating on getting a CC01 or CC02. any suggestions?

@Ah87100

4 жыл бұрын

isshyfux CC02 is far better than the CC01

@Ryan57Garr

4 жыл бұрын

XV01 ftw! I think Tamiya does a much better job with their rally chassis. So much fun, and I haven’t seen anything better. CC02 is cool, but it’s not really a crawler.

The chassi self seems to be very interesting..the biggest problem is the Axles especially in the front with the steering angle. I would try to fit mst axels on in and the long pajero body from loops.. And if this all walks is the only fail to paint it pink🤣🤣😂😂

It's a great video. It's too hard for me to take a video, too.

MOG body 👍👍👍

I mean, I'm not sure why anyone would want to rock crawl this rig (there's only a million other crawlers on the market anyway 🙄). Tamiya designed this kit for 'scale running'. Thank God, a real scale 4x4 solid axle kit (with open diffs etc), finally. That's the Tamiya way 😁💪 P.S. I just ordered one 😎

Hi Matt, any chance you could do another run video, but really challenge it, take it to the limit,one more time lol I would love to know how hard you could push it. I’m not really a fan of actual rock crawling, too much vehicle sympathy. But I would like to see what it can do over loose gravel, sand, soil ,roots and even rocks ............. this is the tamiya way. 😎👍👍👍👍👍

@scalebuildersguild

4 жыл бұрын

If there’s no snow in the forecast, absolutely.

Hopefully we see some new hard body versions soon. The Tamiya way. LOL.

You should make it into a new suzuki jimny 👍

short wheelbase looks like a perfect platform for a scratch built suzuki samurai

@erebus1964

4 жыл бұрын

You can scratch build a suzuki or look at the page from jsscale.net. They got the open SWB, the metal roof SWB and the hardtop LWB.

Hai... Can you use MN d90 hardbody shell on it?

@scalebuildersguild

3 жыл бұрын

Not familiar with that body.

@MalaysiaRCadventure

3 жыл бұрын

@@scalebuildersguild this cheap china 1/12 MN d90 car kzread.info/dash/bejne/ZadtlZepebS2p7Q.html wonder if it fit

This will be a good project Pajero evo Rally car build.

That brown SUV up left shelf, what is it?

@scalebuildersguild

4 жыл бұрын

Not brown. Inferno Red 5th gen 4Runner.

@uncletom1971

4 жыл бұрын

Aha! Yes! Thank you. And do you have some video where you show a bit more of it?

@uncletom1971

4 жыл бұрын

What chassi is it?

Whats the story on that awesome looking servo horn?

@scalebuildersguild

4 жыл бұрын

Tamiya Servo Saver Hop-up.

Dont forget that CC means Cross Country !!! Its not a full crawler. It can get a light crawler whit Hop ups. But the basic chassis Looks better then a CC 01 chassis for offroad use.

CC02 wheelbase is the same as the clodbuster's body. Do that!

Hi Friend. Is possible change the body? I want to buy one, but I prefer the Land Rover Defender 90 body

@scalebuildersguild

4 жыл бұрын

Of course, any body you like provided it matches the wheelbase and track width.

@GastonMaqueda

4 жыл бұрын

@@scalebuildersguild Thank you for the respond I will get mine in the next few weeks. Thank you again

Strengthen the body posts too bro

I saw a red orange 4runner behind you. Can you talk about it?

@scalebuildersguild

4 жыл бұрын

I’ve talked about it in countless other videos. Check out the What’s on the Bench series.

Give me that CC02 that's what you should do 😄

Monthly mayhem cc02 comp challenge

Turn it into a Lada Niva 😁

it is the whay

In my opinion the best tamiya kits are the belt driven ta- series The m chassis cars The TB series... i still regret selling my TB02 subaru The cc01/cc02 And the 2wd fighter buggys

@fuckngreat8955

4 жыл бұрын

@Steve Vento havent owned one yet so i dont know if i like it or not

Tamiya ways

I own couple doesens tamiya kits, and the tamiya kits are all I got(never had a chance to get non tamiya kits), So, I know the truth of what you mean for "THE TAMIYA'S WAY", and I can feel that you were trying pretty hard to be a nice gentle man for this review... 🤭

@scalebuildersguild

4 жыл бұрын

Not at all. I love Tamiya. It’s what sparked my joy for this hobby.

@seth8005

4 жыл бұрын

Well, it's nice to know someone still in love to tamiya, so do I😊 But I am still struggling to get the cc02 or not, at least not for the price now... Anyway, love your review, and love the color on your G500, good job! 😁

曼达洛人可还行，this is the way哈哈哈

I think you need to hit up noob to see if he can make an AMC Eagle body for it

@perrygower7060

4 жыл бұрын

You could call it "Erglemahgerd!"

Brushless motor get a new g500 body paint a different color put the lights in and get sound kit with sound of the real engine noises of the real g500 engine do an interior lit up dashboard moving steering wheel moving windshield wipers turn signals reverse lights and hope they make metal frame rails eventually as a hop up for it and metal wheels for it eventually a 2-3 speed gearbox hop up for it that will act like an actual like it an automatic transmission with paddle shifter gearbox option.

and did I miss the upgrade-video to this or is this w.i.p.? 😉

@scalebuildersguild

2 жыл бұрын

I'll be doing upgrades on the Bronco when it comes out!

there some room for gear reduction if you want to go crawler

rear wheel isnt centred... only a little OCD killing

Wait. Heating decals makes them form to the body? Consider my mind blown.

@scalebuildersguild

4 жыл бұрын

Yep, I apply all my decals with a heat gun and burnishing tool!

Blackfoot body all the way! Its the Blackfoot way.

👍🏽🐒🇺🇸

Did it legit take 4 hours? Or were you chatting and BS in live chat?

@scalebuildersguild

4 жыл бұрын

Lots of chatting.

Yea right...... Traxxas is leaps and bounds above that kit. Get a trx-4 for tour frist crawler

@scalebuildersguild

4 жыл бұрын

This isn’t a crawler, it’s a trail truck. Comparing this to any traditional crawler is completely missing the point of a Tamiya Kit.

@yamaha230xxx

4 жыл бұрын

Scale Builder's Guild oh sorry not to familiar with this company I’ve looked at them but nothing really peaks my interest