This was a weird project in the sense that it pushed me further than any other model in a long time. I tried out a lot of new things on this model mainly the marbling effects and painting on the ID marking and Hinomaru's. I actually didn't have anything to record for the decal process aside from the numbers on the tail. I know that I've ranted and raved about how much I like the Airfix Zero, but this is an utterly amazing kit to assemble. The engineering and finesse of the parts is simply incredible. I know that this kit is a bit on the expensive side for a small 1:72nd fighter but once you build it you won't regret it. I'd also like to thank Greg at stevethefishdotnet, for providing me with the maskings for the windows. I know that many of you long time viewers have seen me mask most of my clear parts, but the frames were so thin I couldn't do it. I'd also like to thank those who commented encouraging me to build this kit. I think that with everything going on in my life I needed a challenge like this one. A few things I'd like to mention: - I think that this Zero was built by Mitsubishi and not Nakajima, so I was repainting the interior colors as I realized afterwards that I had used the wrong paint. Also to lead me to believe this was a Mitsubishi Zero was the removal and cover of the tail hook which was something common with Mitsubishi as well as the longer green-grey line on the fuselage and not the curve. -As far as the weathering is concerned i.e the silver chipping. I studied several books carefully and noticed that the chipping was more minimal. It's also difficult to properly weather a Zero in a small scale. However I did find a few interesting pictures where the ID bands on the fuselage were chipped and the under laying paint (Green & Grey) was visible. I thought that this would be a unique feature to add to my aircraft. Like I said this project really pushed me to try to do and be better, it was a very fun experience and I've spent the past few days grinning at it in my display case. And please don't ask me how I got that antenna wire on... I have no idea. Thanks for watching and I hope that you enjoy this kit as much as I have.

@stevethefishdotnet

4 жыл бұрын

I'd forgotten about sending you those masks. This turned out great as always. Here is a belated Valentine's poem for you: Roses are red Violets are blue My panel lines suck And yours never do. So did you find that yellow GX paint covered the darker paint underneath with minimal interference?

@rebelsatcloudnine

4 жыл бұрын

I really hated the GX color, I had a base layer of white on there and it came out really green. I was shocked that I went and tested this on an all-white backdrop and it still has a slight green tint to it. So I decided to just go back and slowly add more layers, keeping in mind they were very thin. And I sort of got the color I wanted. Not sure what I did wrong with this GX paint, I couldn't find any instructions for it.

I think all the hard work you've put in this model payed off spectacularly, hands down the best zero I've seen in 1/72. Really looks like a real plane. Excellent job mate!

@rebelsatcloudnine

4 жыл бұрын

Thank you so much Alessandro, I had a a lot of fun building up this one.

Another fantastic build, paint and video loved watching this. Also loved the video showing part of your stash. Thank you for sharing.

Well done. Your cinematography is as beautiful as the model. You just earned another subscriber.

Amazing. Brilliantly thought out and executed. Inspires me to try more difficult painting.

WHAT A WORK OF ART. The details to the cockpit (which, on the other side, I wish I had the chance to behold in a little bit more of detail, before putting it on place), the weathering all over the aircraft. Just perfect.

@rebelsatcloudnine

4 жыл бұрын

Thank you so much Alan :D I'll have pictures of that on my blog later on after it's published.

As always, a great work!

Wow! The whole thing is extraordinarily interesting.

Outstanding as always.

As always, a great build!

Bravo Jared you've done another beauty! Found this video very relaxing and the music was great all the way through. You never get bored of doing the Zero do you.

@rebelsatcloudnine

4 жыл бұрын

Thank you very much. I hadn't realized how long it has been since I did a Zero. I had a lot of chaos with my modeling last year and this project really got me on track for 2020.

@matthausrex5973

4 жыл бұрын

@@rebelsatcloudnine I always look forward to your videos. Hope 2020 is good for you.

My favourite model kit ever in my favourite scale: you did it justice!

@rebelsatcloudnine

4 жыл бұрын

Thanks Paolo :)

@PaoloSonego

4 жыл бұрын

@@rebelsatcloudnine I love both the plane and the model kit and I'm thinking to model the A6M5 model 52 in the near feature. Your video will help me in the building!

Amazing work 👍

Gorgeous work. Thank you.

Beautiful, simply beautiful, museum quality my friend.

@rebelsatcloudnine

4 жыл бұрын

Wow, thank you Brian :D

Always nice to see you go back to a zero!

@rebelsatcloudnine

4 жыл бұрын

It's been along while, I'd sorry to say.

Great looking air plane 👍

Great job. I can see your passion for aviation in Japan. You build beautiful miniatures and Japanese especially.

@rebelsatcloudnine

4 жыл бұрын

Thank you very much! It felt good to build up this Zero, and to build another one of these Tamiya kits, they are exceptional.

Tamiya detail and quality as usual: excellent! Can’t wait to build it, side note: this is the plane that straffed my father on the beach during WW II

Simply perfect!

Really nice build. Love the masking work. Turned out really well, especially given you were working at braille scale!

@rebelsatcloudnine

4 жыл бұрын

Thanks Bruce, those zig-zag lines on the fuselage really made me question what I was doing with all of the masking, is this really worth it? haha

Good looking zero well done

Very NICE!

Turned out Nice!!!!

You are Mr Motivator 👍 Have a British pint 🍺. My 1/72 Hobbyboss Seahawk now has some added love🤪👍 Thankyou for sharing your awesome Zero.

Yet another stunning masterclass in masking. As always a joy to watch Now.....where in my stash is my Zero kit.....!!!......

@rebelsatcloudnine

4 жыл бұрын

Thanks as always Jerry :D This is a really amazing kit, if you can build one up, it's so cool watching the parts just fall together.

Stupendo 👌👌👌👌👌

Ottimo 😍😍😍😍😍

Just as I think modelling can't get any better.. it gets better.. ;)

@rebelsatcloudnine

4 жыл бұрын

Thank you kindly Rob :D

cool video, buddy, like 👍 👍 👍

That must have been rewarding! Bet it looks great with your others on the shelf. Was wondering about that interior colour. That was Mitsubishi int. Green? My first zero I removed the arrester hook as the first 12 in China where not equipped. You have done a great job, should be proud!

@rebelsatcloudnine

4 жыл бұрын

Yes, the first color I used accidentally was Nakajima green a really pale color, after I realized my mistake I went out and repainted it all with the Mitsubishi color. Thank you very much Lance :) I've actually sold one of my Zero's so I've now got a good place for this one on the shelf.

@lancecaldwell3874

4 жыл бұрын

@@rebelsatcloudnine Thanks for the heads up. Now I know for sure I have the right colour for my nakajimas. Very simular to Italian interior colour. Thanx.

Jared, Glad to see ya back. That is a jewel-like build. Beauty. Interesting trick with the foam rubber in the cowling and then use it to clip onto. I would have never thought of that myself. Touché So that GX-4 is it? I stopped and read the comments first, but didn't realize it was a yellow. Is it a new brand of Gunze? Very clean and pure looking Lemon yellow. Probably about 15 coats, huh? Looks like Tamiya has the title again. Raised the bar quite a bit. And in the hands of a Master...

@rebelsatcloudnine

4 жыл бұрын

Thanks Dave, I haven't gone anywhere really, KZread just doesn't like promoting my videos anymore. The foam in the cowling worked out really quite well I have to say, something I'm going to try and remember for future builds. I'm not sure on the GX paints. Yeah it took a lot of layers to get that color, and it just kept coming out as green. I'm wondering if I need a GX White as an base layer?

@cellardwellerproductions5125

4 жыл бұрын

Not that I know bunches about them, but yeah, it had been suggested to undercoat both yellow and red, and most definitely under any florescent with white. Creates another step, but brings out a truer tone.

タミヤプラモデル　ゼロ戦GOOD！

Hello! I like your Zero wery much! I have question. What diameter of drill you used to drilled cover of engine for machine Guns? Best regards!

@rebelsatcloudnine

3 жыл бұрын

I don't remember the exact size, it's just one from year back, but I think it's 1mm.

@ktos337

3 жыл бұрын

@@rebelsatcloudnine thx for your answer!

Quality work Jerad.(have I spelt that correctly?) Been thinking about doing a zero ....snag is there are so many marques ....gets confusing

@rebelsatcloudnine

4 жыл бұрын

I agree, there are many fantastic schemes I'd like to paint, but I just don't have enough kits to do them all :D

Hello again! I have another question. What colour you used to make IFF stripes ?

A nice build mate, I happen to be building a model of the same type of plane as the one in this video, but mine's from academy😁 anyway could you tell me the size of the wires you used to replicate cables on the plane's engine behind the propeller?

@rebelsatcloudnine

3 жыл бұрын

It is 0.20mm Magnet wire

That's very excellent work, my friend. It's also very interesting as well. I also have a Zero kit in same scale. Although, mine is from Hasegawa. Do you also have the Zero from Hasegawa as well? And what's your email?

@rebelsatcloudnine

4 жыл бұрын

I've built the Hasegawa A6M5, there's a video build of it on my channel.

@Harikejn

4 жыл бұрын

@@rebelsatcloudnine Thanks for the info. I didn't know that my friend.

Nice seeing the old matchbox paint tin. Can it still be used? I still have a few bottles of the old airfix paints glass bottles. Nice to see you still have a zero fixation. Lol.

@rebelsatcloudnine

4 жыл бұрын

Ron, I don't think that fixation will go away anytime soon haha :D Test them out, I've heard of people who have had enamel paints that are over 25 years old and still good as day one. I don't have much use for enamels anymore aside from weathering, but yes these old Matchbox paints are good to go.

@ronmac9522

4 жыл бұрын

@@rebelsatcloudnine there are so many different brands of paint on the market. I am finding it over powering. I am having trouble with A.K. interactive. I painted a mustang using their aluminium, a week ago, and it is still wet.

@rebelsatcloudnine

4 жыл бұрын

Hmm, that is interesting. I can think of 2 things that might be going on. 1- The paint needs to be mixed a lot, which is common with many metallic colors. 2- Possibly there was too much paint applied and it's taking a long time to dry. These are just my guesses.

@ronmac9522

4 жыл бұрын

@@rebelsatcloudnine I did use brushing, so it is possible I used too much or a combination of both. It took 8 days to dry. It's okay now though.

Currently i'm building this kit, it's absolutely gorgeous! Yours came out fine. Are the silver wheel wells correct? The instructions says blue-green metallic (Aotake).

@rebelsatcloudnine

Жыл бұрын

Yep

An interesting project for paint skills would be one of the late-war Japanese fighters, when apparently they couldn't make good quality paint and the green just washed off in the rain, leaving a mottled green/aluminum finish.

@rebelsatcloudnine

4 жыл бұрын

Do you have a source for that, I'd like to read more into it.

@scottparis6355

4 жыл бұрын

@@rebelsatcloudnine Here's an article with lots of pictures, of course all black-and-white. forum.largescaleplanes.com/index.php?/topic/52770-why-do-japanese-paint-chip-so-much/ I just Googled "Japanese fighters with worn faded paint." Apparently some of the raw materials for quality paint were not available, plus in the interest of speed the manufacturers skipped priming the aluminum.

@rebelsatcloudnine

4 жыл бұрын

Yes they stopped priming in 1943, but I'm looking more for your source on the paint simply washing off from the rain?

@scottparis6355

4 жыл бұрын

@@rebelsatcloudnine Oh sorry, I just made up the washing off in the rain part. But Pacific island sun and rain and salt water were hard on all paints, including Allied; they all faded. But from the pictures it's apparent that late-war Japanese paints suffered badly, and for whatever exact reason came off in large areas, exposing the aluminum underneath.

@rebelsatcloudnine

4 жыл бұрын

I do have a bot of a theory on that one, as some pictures I've seen of the Zero show really stressed skin, I'm wondering if the ESD metal they used reacted to the warm sun stressing the metal, and because the paint wasn't applied with a primer that once it cooled back to its original shape that the paint kind of popped off. That an a combination of the seawater really weakened the paint. Again just a theory I've had for a few years now.

Japan then: the fearsome Mitsubishi A6m zero was a damn deadly piece of tech Americans feared this shit Japan now: *let's make this a wide eyed anime girl And lewd it go to hell!*

Very nice, Jared. I watched with great interest from beginning to end. The Zero in 1/72 is one of my favs. I like the Airfix kit, too. I have yet to build the Tamiya, although I have a couple in my collection. I'm saving them, I guess. 🙂 A couple of questions: I noticed you used Mr. Cement SP. I was checking into that line of glues just yesterday. It's still unclear what special features it has. Are they slower or faster setting than Mr. Cement S? SPB is black, which is kind of handy, when you want to see where your glue is going, I guess. As well: what did you use to create the chips? Pencil? Paint applied with brush? Thanks, for the video. Nice to see you put out some 1/72 Japanese aircraft, again! Looking forward to the next video.

@rebelsatcloudnine

4 жыл бұрын

Build one up sometime soon, as it's the nicest little model you can ever build. Watching the parts fall together is kind of magical. -So the Mr Hobby SP (Special Power) is designed to dry quicker, but it's also a much hotter glue. So on the seamlines where I wanted a really strong bond I used the SP glue. It's also aggressive with the Airfix styrene, it practically welds the pieces together, quite incredible. So yes the SP is quicker than the S, and the SP is kind of my go to glue now. And you are correct the SP Black is just dyed black for visibility, not something I find necessary for my builds but Greg likes it more than the SP, so modelers choice on that one. - For the chips, I used a tiny brush, and lightly painted them on. I didn't record any of it as I was focusing really hard and I was working very close to the model. I've got that J2M3 you sent me a while back out. I just need to buy a book on it for reference and then I'm going to start that one. It's going to be a cool project.

@messer1096

4 жыл бұрын

@@rebelsatcloudnine Great to hear the Raiden is upcoming. I'm not sure I built one of those or not, to be honest. 🤔 I have built a couple in 1/48 for sure and was amazed at the size of the Cockpit! You could bring a lunch for sure, in a Raiden. Speaking of Raidens, I bought (or I thought I did) a 1/72 Hasegawa Raiden from Plaza Japan at a great price a while ago. When it arrived, the box was bigger than I expected. Inside was a 1/48 scale Raiden! Either they screwed up or they ran out of 1/72 and substituted a 1/48 scale kit. As for the glue, I have Tamiya quick-setting glue here. That might be on par with the SP. I'm tempted to pick up a bottle of SP, all the same, but I've got so many bottles of glue here (enough for a lifetime!) I'm reluctant to buy another!

@rebelsatcloudnine

4 жыл бұрын

Wow, that's awesome :D The 48th scale kit if a beauty, I think that you will really have fun with that one. I know what you mean I'm tempted to try out all sorts of glues as well. I've kind of replaced Mr Hobby SP from Tamiya, I just like it a lot more, and that includes the standard glue as well. They dry a little slower on the plastic but they have a better bond, and I find that saves me work in the long run.

Type22？

@rebelsatcloudnine

4 жыл бұрын

Yes, that is correct.

painting landing gear bays not in metallic blue seems to be controversial. why would you do that, especialy when you had that colour in stock

@rebelsatcloudnine

4 жыл бұрын

Because this Zero was built by Mitsubishi and not Nakajima. Nakajima Zero's had the metallic blue color.

@OgrabliatorKorovanov

4 жыл бұрын

​ wow... you have more expertise in subject than tamiya

@rebelsatcloudnine

4 жыл бұрын

@@OgrabliatorKorovanov I appreciate that, but I doubt it :) I study the Zero quite a bit, it's a favourite subject of mine. And as I investigated the location this was stationed and the squadron that was using it, not to mention the exterior paint scheme led me to believe that this Zero was Mitsubishi built. Plus it's an interesting color scheme for my collection.